Comments log

This is a log of comments.

(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)

• 18:27, 22 March 2024 Harry talk contribs deleted comment #3821 on X306
• 18:26, 22 March 2024 Harry talk contribs deleted comment #3868 on X306
• 18:21, 22 March 2024 Lisa talk contribs posted a new comment on X728-hardware (Hello,The X728 can support the X715. Mount the X728 on top of the X715；need a 2*20 Pin Female Header to increase the height, and need spacers of the appropriate height to hold the X715 in place. We do not recommend this and suggest you consider the X729 if you want to use a UPS that supports wide voltage inputs.)
• 17:56, 22 March 2024 Lisa talk contribs deleted comment #4546 on X728-hardware
• 17:55, 22 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,We tested that X728 is compatible with Pi5，please refer to X728-script)
• 17:51, 22 March 2024 Lisa talk contribs posted a new comment on X728-hardware (Hi,X728 not support X715)
• 20:11, 21 March 2024 147.161.228.175 talk posted a new comment on X306 (Easy solution, that Geekworm support does not know.... in config.txt comment out: dtoverlay=dwc2 and in cmdline.txt remove: modules-load=dwc2,g_ether reboot and it works!)
• 02:51, 21 March 2024 73.18.184.40 talk posted a new comment on X1011 (Any plans for a case for this hat ?)
• 21:50, 20 March 2024 64.39.208.241 talk posted a new comment on X735 Hardware (On X735 v3.0 is the Type-C DC 5V connector for input power or output power? If output power, how much current can it source?)
• 18:56, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (Yes, you can remove the fan and replace it with a P165 Heatsink, but you need to prepare copper spacers of appropriate height to fix it.)
• 18:47, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (Sorry, we cannot be sure yet. Please follow our wiki and Geekworm official store for updates.)
• 18:43, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (we don't have longer USB cables yet.Thanks very much for your feedback.)
• 08:20, 20 March 2024 73.94.245.209 talk posted a new comment on XScript (Your "fix" for kernel 6.6 does not work. ~ $ cd xscript rm x-c1-softsd.sh x-c1-pwr.sh -f git pull origin chmod +x *.sh sudo cp -f . /x-c1-softsd.sh /usr/local/bin/ sudo cp -f . /x-c1-pwr.sh /usr/local/bin/ sudo reboot Already up to date. cp: -r not specified; omitting directory '.' cp: cannot stat '/x-c1-softsd.sh': No such file or directory cp: -r not specified; omitting directory '.' cp: cannot stat '/x-c1-pwr.sh': No such file or directory Broadcast message from root@mediabed on pts/1...)
• 17:57, 19 March 2024 207.188.130.160 talk posted a new comment on X1003 (Anyone knows if Foresee E2M2 064G (SteamDeck original ssd nvme 2230) works with this model? thanks)
• 14:23, 19 March 2024 67.167.95.152 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (What is a good boot time booting from NVMe?)
• 11:16, 17 March 2024 184.147.47.100 talk posted a new comment on X1004 (Hi. The description says "PCIe 2.0 interface" but the features list says "Provides speedy data transfer with PCIe 2.0 5Gbps / PCIe 3.0 8Gbps". Does it support Gen 3 speeds or not?) Tags: Mobile web edit, Mobile edit
• 22:05, 16 March 2024 142.126.95.42 talk posted a new comment on X1001 (I tried the Geekworm x1001 with a Fanxiang S660 500gb Nvme. While I was able to get it to boot a few times with Raspberry Pi OS and also Recalbox, I have not been able to get it to boot successfully since with anything I've tried. I currently would not recommend this combination.)
• 02:59, 16 March 2024 37.201.154.23 talk posted a new comment on X-C1 Software (howto on esxi fling raspberry? does the script work on it?)
• 20:30, 15 March 2024 68.50.113.137 talk posted a new comment on X1000 (What are the unmarked, unpopulated pin-holes next to the PCIe FFC connector?)
• 15:27, 15 March 2024 86.49.235.161 talk posted a new comment on C790 (What is Raspberry Pi 5 maximum 1080p fps? Does RPI 5 utilize 4 lan like CM4?)
• 13:50, 15 March 2024 58.208.50.167 talk posted a new comment on M901 (have a good day)
• 03:43, 15 March 2024 84.132.182.86 talk posted a new comment on X735-script (Hello Support under RPI OS Linux 6.6.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) aarch64 GNU/Linux I get now these Error File "/home/pi/x735-v2.5/./read_fan_speed_once.py", line 29, in <module> GPIO.add_event_detect(TACH, GPIO.FALLING, fell) RuntimeError: Failed to add edge detection How can I solve this?)
• 00:17, 15 March 2024 5.44.173.95 talk posted a new comment on LVDS Adapter (I have V1.5 board and it's not working. I've checked, and the supply voltage from U1 is 1,2V, is this correct? Voltage from U2 is correct 3,3V.)
• 04:45, 14 March 2024 176.38.170.162 talk posted a new comment on How to update eeprom firmware (After RPI imager wrote Ubuntu to 1TB SSD, X1001 hat(New version) is not responding anymore. SDD is working fine with other hat.)
• 03:38, 14 March 2024 142.134.94.40 talk posted a new comment on P579 (I bought the P579. I already owned the x1001 and the Pi5 had the active cooler. This is a great combination case which I highly recommend.) Tags: Mobile web edit, Mobile edit
• 18:16, 13 March 2024 78.94.224.220 talk posted a new comment on X882 (Hello i planned using two Samsung 970 EVO SSDs are thoose not recommended? What were your issues with thoose SSDs? Thank you in advance!)
• 05:58, 13 March 2024 82.64.113.192 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (spend whole day on the same issue. having Crucial P3 Plus 500GB ssd : Model Number: CT500P3PSSD8 Firmware Version: P9CR411 thank you man for sharing, you saved my live :))
• 22:11, 12 March 2024 213.167.121.42 talk posted a new comment on X1202 (I've got the same issue. I'm using the official RPI 27W power supply through usb-c)
• 19:59, 12 March 2024 50.4.166.201 talk posted a new comment on X728-hardware (Hello, is the X728 compatible with the X715? How are they connected? Do they need an external power cable between them? Would you share a block diagram or schematic to verify that there are no issues between these boards? Thank you)
• 03:50, 12 March 2024 50.4.166.201 talk posted a new comment on X715 (Would you give more details on how to use an X715 with an X728? What versions of the boards are compatible? Thank you)
• 00:23, 12 March 2024 213.240.178.238 talk posted a new comment on X857 V2.0 (Is TRIM available in year 2024?)
• 16:30, 11 March 2024 83.38.21.114 talk posted a new comment on XScript (Hello, I install XScript on a "Linux raspberid64 6.6.17-v8+ #1734 SMP PREEMPT Mon Feb 19 11:59:52 GMT 2024 aarch64" but the "x-c1-pwr.sh" doesn't work properly: $ sudo /usr/local/bin/x-c1-pwr.sh /usr/local/bin/x-c1-pwr.sh: line 6: echo: write error: Invalid argument /usr/local/bin/x-c1-pwr.sh: line 7: /sys/class/gpio/gpio4/direction: No such file or directory /usr/local/bin/x-c1-pwr.sh: line 9: echo: write error: Invalid argument /usr/local/bin/x-c1-pwr.sh: line 10: /sys/clas...)
• 13:13, 11 March 2024 27.116.208.36 talk posted a new comment on PiKVM-A3 (Fellow customer here. The Raspberry Pi 4 11mm embedded heatsink (P165-B) is compatible with the KVM-A3 Kit using four 2.5x9+6 standoffs instead of the 2.5x20 standoffs included in the KVM-A3 Kit. The fan doesn't get in the way and everything fits perfectly. You can probably remove the fan entirely with the heatsink installed, but I haven't personally tried.) Tags: Mobile web edit, Mobile edit
• 13:10, 11 March 2024 27.116.208.36 talk posted a new comment on P165 (@geekworm please comment) Tags: Mobile web edit, Mobile edit
• 09:27, 11 March 2024 104.28.55.18 talk posted a new comment on X1001 (and of course I get an SSD that is specifically on the incapable list. Whoops.)
• 08:38, 11 March 2024 173.53.65.5 talk posted a new comment on X1003 (You people are interesting GeekWorms. It would add .05 to 10 cents to add the ability to put the small nvme screw into eithe the 2242 or 2230 holes on the x 1003 device. Why not place the glued in washer in both holes. Just a thought since these tiny washers are hard to locate. Just saying!)
• 01:18, 11 March 2024 68.202.27.10 talk posted a new comment on PiKVM-A8 (I would also like to be able to control the fan. It is currently louder than the PC being controlled.)
• 00:58, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I also find the current fan terribly loud :( Is there also a suitable one that can be installed relatively easily and is very quiet? Best regards)
• 00:57, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (That would be great :))
• 00:56, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (Pi KVM is really great, what I wonder if you can completely remove the fan or if that causes problems? Can you use a passive cooler as an alternative? Or at least make the fan quieter?)
• 00:54, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I am also very interested in a version for the Raspberry Pi 5, as I would not like to buy the version for the Pi 4 now, which will soon no longer be up to date. Can you say approximately when a new version will be available for the Raspberry Pi 5?)
• 00:52, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I would also like to have longer USB cables included with the kit or as an add on in the store at Geekworm/Amazon. Especially as it is a special USB cable. I would also like the bundle to be 3-4€ more expensive if it would include 2 lengths of KVM USB cable. A medium one like now and a long one. The same with the ATX Ethernet cable, that would be really great and I think that these are very reasonably priced items. It would be a great service and would make the set even better :))
• 19:55, 7 March 2024 113.36.104.9 talk posted a new comment on XScript (I installed XScript on Raspberry Pi OS, but excute source ~/.bashrc display -sh: 1: source: not found xoff command don't work but sudo /usr/local/bin/x-c1-softsd.sh works fine. Perhaps "source ~/.bashrc" error caouse the phenomenon. Can I solve this error?)
• 17:04, 7 March 2024 Lisa talk contribs posted a new comment on X829-C1 (Hello, you can buy it（6010 Fan-2pin XH2.54） from: https://geekworm.com/ If you need to ship to Europe, please email to us[support@geekworm.com])
• 15:56, 7 March 2024 103.192.227.240 talk posted a new comment on X1202 (Hi,We have tested X1201 and there is no problem. Could you please provide more detailed information? send some pictures or videos to us, support@geekworm.com)
• 15:53, 7 March 2024 103.192.227.240 talk posted a new comment on X728 (Hi,It is normal. The algorithm for reading the power is very complicated. You can try draining the battery, then fully charging it, and then try reading the battery level again.)
• 14:49, 7 March 2024 80.174.63.100 talk posted a new comment on X829-C1 (Is it possible to purchase the cooler separately ?)
• 12:03, 6 March 2024 66.191.29.250 talk posted a new comment on P579 (That was my first observation. It went down to 53%. I don't know what it was before there was no issue.)
• 09:34, 6 March 2024 146.70.166.159 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Just bought an x1001 and paired it with a 1T Samsung 980 Pro. Installed with no problems other than having to reposition the PCIe cable once. Love the performance!)
• 01:39, 6 March 2024 86.171.117.117 talk posted a new comment on X1001 (I am one very happy customer with the X1001. Like the way it provides just enough clearance for the CPU fan. I would recomend fitting a heatsink to the SSD. Amazon "ELUTENG M.2 SSD NVME Heatsink 2280" is recomended, it fully encases the SSD keeping it nice and cool. Fits on the X1001 perfectly)
• 01:34, 6 March 2024 86.171.117.117 talk posted a new comment on X1001 (I have the same hardware X1001 and a Crucial P3, which works perfectlty. Most likely reason for problem, you must format the SSD (EXT4) before installing on the X1001 in the PI.)
• 00:35, 6 March 2024 173.239.224.146 talk posted a new comment on X1202 (After using the USB C port on the x1202 I heard the board making small ticking noises. After I pulled the plug the entire unit lost power. Is the USB C port not the preferred port?)
• 21:30, 5 March 2024 93.42.109.113 talk posted a new comment on X728 (My % of charge is above 100, like 104...it is normal?)
• 16:04, 5 March 2024 Harry talk contribs posted a new comment on X1201 (Nothing will happen, but it won't charge)
• 15:58, 5 March 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hello,Under normal circumstances, its power supply needs can be met. If it doesn't work, you can try changing the power supply and test it.)
• 15:54, 5 March 2024 Lisa talk contribs posted a new comment on LVDS Adapter (Hello，Our test can support 1024x600 resolution, but because there are too many screen models, we cannot guarantee compatibility with all screens.)
• 15:33, 5 March 2024 Lisa talk contribs posted a new comment on X1202 (NOT support.)
• 14:58, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can run "lspci" command to check the controller brand of the SSD, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problem NVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
• 14:56, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can check the SSD controller through lspci, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problemNVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
• 14:51, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,It's hard to see what's wrong here. Please send screenshot via email[support@geekworm.com]. And tell us your order number. Thanks)
• 11:29, 5 March 2024 Lisa talk contribs posted a new comment on P579 (Hi,We also considered this issue when designing P579/P580 Case, but it is difficult to implement. If you have any good switch ideas, please recommend them to us.Thanks)
• 09:54, 5 March 2024 109.111.162.185 talk posted a new comment on LVDS Adapter (Helo. I've bought v1.5 board and trying to connect it to convert LVDS signal from AC8257 SOC to HDMI but nothing works. 1.Edid on HDMI receiver is necessary or not? 2. I have 1024x600 resolution is it supported?)
• 04:50, 5 March 2024 192.77.184.26 talk posted a new comment on X1202 (Can this board tolerate being powered on DC jack AND USB-C simultaneously?)
• 19:32, 4 March 2024 103.193.138.118 talk posted a new comment on X1201 (@Harry Yes but what if someone ACCIDENTALLY uses the wrong port? What will happen?)
• 18:58, 4 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ)
• 18:55, 4 March 2024 Lisa talk contribs posted a new comment on C779 (Hi,The LED does not support setting, you can use something to cover it.)
• 18:53, 4 March 2024 Lisa talk contribs posted a new comment on X729 (Hi,X729 is not compatible with Pi5. Please refer to X1200/X1201/X1202 UPS for Pi5.)
• 18:44, 4 March 2024 Lisa talk contribs posted a new comment on X1002 (Hi,Sorry for the inconvenience, could you tell us your order number? Where did you buy it? It may be a problem with the mounting holes of the X1002 board. Please contact us via email and we will provide a solution. support@geekworm.com)
• 18:38, 4 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,X728 not support 3xAA adaptor)
• 17:58, 4 March 2024 46.142.176.194 talk posted a new comment on NASPi Gemini 2.5 (I am planning to use a high quality linear power supply with the NASPi Gemini 2.5 V2.0 Dual 2.5 Inch SATA HDD/SSD NAS Storage Kit with DC 6-18V Wide Voltage Input The power supply can provide 12, 15 or 16V / 3A. I am using a RPi 4 and just a single 8TB Samsung 870 QVO SSD (according to spec, it needs 3.3 Watt max.) Will that very linear power supply be sufficient for the NASPi Gemini 2.5 V2.0? If so, would it also be sufficient, If I add a second SSD and use Raid mode?) Tags: Mobile web edit, Mobile edit
• 19:24, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (dmesg shows: [ 0.394368] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: [ 0.394376] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] [ 0.394387] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 [ 0.394392] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 [ 0.394398] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.395575] brcm...) Tags: Mobile web edit, Mobile edit
• 18:58, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (The lspci brings this answer: 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0001:01:00.0 Ethernet controller: Device 1de4:0001) Tags: Mobile web edit, Mobile edit
• 18:33, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (I have a KingSpec M.2 NVMe mounted and it does not show up with lsblk. The blue light is on. How can i check what the problem is?) Tags: Mobile web edit, Mobile edit
• 06:22, 3 March 2024 67.189.231.55 talk posted a new comment on P579 (bought P579 case and shield for it. Went together fine, waiting on drive so have no comments on operation. Was there or is there going to be a sw cover for the pi power sw. Using a fingernail now to operate it and it is exposed to dust and quite delicate.)
• 03:56, 3 March 2024 73.242.156.151 talk posted a new comment on X1001 (I got the X1001 and a Crucial P3 nvme but Raspberry Pi does not see it. Is the Crucial SDD compatible and how do I troubleshoot?)
• 02:24, 3 March 2024 93.42.109.113 talk posted a new comment on X728 (Can I use 3xAA adaptor instead of 18650 battery?)
• 16:40, 2 March 2024 77.39.172.42 talk posted a new comment on X1002 (Just purchased and discovered the mess with the screws... SHAME ON YOU! people are complaining about this since a month and you still sell this kit with wrong screws! Please provide detailed specs on what screws should I buy now. I can't wait for sending back the item and search for an alternative!) Tags: Mobile web edit, Mobile edit
• 23:07, 1 March 2024 148.252.147.227 talk posted a new comment on X729 (I would like to know this too. Having a large range input would be useful and none of the official RPi 5 ones can cater for that.) Tags: Mobile web edit, Mobile edit
• 18:01, 1 March 2024 93.240.96.232 talk posted a new comment on C779 (Hello, is it possible to turn of the onboard led?)
• 14:44, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,It is difficult to determine the reason for the very slow speeds. It may be an issue with the FFC cable or a compatibility issue. Thanks for your feedback.We will continue to monitor this issue to find the best solution.)
• 12:37, 1 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,If the board is burned, we do not recommend continuing to use it to avoid safety concerns.)
• 12:27, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We will be upgrading P579 Case to support X1004, the new version is in production. It will come soon. Please stay tuned for updates to our wiki.Thank you.)
• 12:23, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We have not tested Coral M.2 SSD; but please confirm 2 things: ① The SSD interface must be NVMe M.2 Key-M or Key-B&M; ②We recommend avoiding the NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility. You can run "lspci" command to check the controller brand of the SSD.)
• 12:09, 1 March 2024 Lisa talk contribs posted a new comment on LVDS2 (Hi,LVDS2 and LVDS 1.5/V20 are different manufacturers with different board designs and cables, there is no functional difference.)
• 11:40, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,Normally there is no need to power X1001 separately. SSD power supply needs can be met through FFC cables. If you want to power X1001 separately, you can use a 2pin wire to power it through 5V IN of X1001.)
• 21:59, 28 February 2024 94.254.123.42 talk posted a new comment on X728 (Hi. I have the 2.1 version without the "Battery Reverse Polarity Protection circuit".. and I really wish I did because I did a oopsie. I realized the issue a second later when smoke started to plume. I thought the device was dead, but interestingly enough, it does seem to work still when I put them in correctly - so question is, is it dangerous to use the device now when "something" have burned or did it not "burn enough" to break the board?)
• 19:56, 28 February 2024 46.59.71.143 talk posted a new comment on X1004 (When will the case be out?)
• 01:22, 27 February 2024 69.42.12.30 talk posted a new comment on LVDS2 (What is the difference between this LVDS2 model and what your site says is the "newest" LVDS 1.5 model? To be clear, I am NOT asking about V20 vs 1.5. Is this LVDS2 model actually the newest model (newer than even the 1.5 model) but the text description on your site is just out of date? Or is 1.5 actually the newest model?) Tags: Mobile web edit, Mobile edit
• 23:40, 26 February 2024 99.237.2.44 talk posted a new comment on X885-software (On a fresh install of the OS, be sure to 'apt -y install git' before trying to run the first script. It's not installed automatically.)
• 22:55, 26 February 2024 77.242.86.148 talk posted a new comment on X1001 (I ordered a X1001 board and as soon as I connect an SSD to it, it makes a high pitched noise similar to coil whine. Is there something I can do about it? Otherwise it works fine.)
• 14:56, 26 February 2024 103.192.227.88 talk posted a new comment on X729-Software (1. OLED displays voltage and current output. 2. You can rfer to bat.py file)
• 14:55, 26 February 2024 103.192.227.88 talk posted a new comment on X729 (OLED displays voltage and current output)
• 14:51, 26 February 2024 Harry talk contribs posted a new comment on X1002 (We are very sorry, this is our mistake, we have also discovered this problem and are working on it. You can return it for a refund)
• 14:48, 26 February 2024 Harry talk contribs posted a new comment on X1201 (Judging from the fault description, it must be that I2C is not enable.Check ing your config.txt)
• 14:47, 26 February 2024 Harry talk contribs posted a new comment on X1201 (This is a UPS, so it is normal logic to supply power from the type-c of the UPS.)
• 14:45, 26 February 2024 Harry talk contribs posted a new comment on P580 (Thank you for your feedback. It may be that the plastic case is the final case and we will consider designing & manufacturing a plastic case as well!)
• 14:44, 26 February 2024 Harry talk contribs posted a new comment on LVDS Adapter (Sorry, not supported)
• 14:43, 26 February 2024 Harry talk contribs posted a new comment on X728 (There may be those who prefer the old ways)
• 14:41, 26 February 2024 Harry talk contribs posted a new comment on X876 (X876 is not compatible with PI 5. You can refer to X1001)
• 00:19, 26 February 2024 73.176.32.190 talk posted a new comment on X1002 (I had to drill out the holes in the standoffs on the board to get the screws through the raspi and the X1002...used the brass nuts to secure the screws on the X1002 side. Worked and X1002 functions.)
• 12:33, 23 February 2024 45.46.196.207 talk posted a new comment on X729 (One of the features is "Measure both output voltage and current draw over I2C with high precision". Could you provide sample?)
• 16:49, 22 February 2024 103.193.138.118 talk posted a new comment on X1201 (What happens if power is applied to the USB-C of the Raspi? Documentation says not to do it, but what happens if you do anyway? I'd like to use the USB-C port as a device port, but not if there's a risk I'll burn out the X1201 or the Pi if I plug the wrong thing in...)
• 08:38, 22 February 2024 110.93.11.249 talk posted a new comment on P580 (Purchased the X1002 NVMe bottom board shield and the compatible P580 case. The case is okay, but there is no button for the RPi5's on off button, just a cutaway on the case. This means that I will have to insert an object into the cutaway to reach to button, which is a few mm back from the outside wall of the case. Geekworm, a simple button would make the case a lot nicer. Other than that, no complaints.)
• 19:51, 20 February 2024 91.90.116.8 talk posted a new comment on LVDS Adapter (Hello, I have two video inputs that I need to swith and send to LCD. I want to use hdmi switch 2 in 1 out. The problem is that one inpout is going via HDMI, second is LVDS RGB 1ch 6-bit. Is it possible to convert my LVDS to HDMI with your board?)
• 17:59, 20 February 2024 139.30.157.71 talk posted a new comment on X728 (How about someone replaces the Links to X728-Software to X728-script, which actually works and is maintained.)
• 02:49, 20 February 2024 65.33.163.151 talk posted a new comment on X876 (Are the X876 pogo pins compatible with the RPi 5B. Dave)
• 08:02, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
• 07:34, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
• 00:54, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (16.54 i mean(rpi is 1mm height))
• 00:53, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (after a quick check(don't wanna disassemble it), the total height with rpi installed is 25.54mm(w/ 0.02mm precision) approximately, the lower plate is 8mm, so i guess the upper plate is 17.54mm)
• 15:51, 17 February 2024 45.46.196.207 talk posted a new comment on X729 (any problems with using it on a raspberry pi 5?)
• 08:20, 17 February 2024 50.52.101.217 talk posted a new comment on X1003 (Using a solidigm P41 plus 2230 1TB drive. Typing this comment with it as the boot drive on my Raspberry Pi 5. Followed directions on the wiki here. Had to reboot twice before it worked. Very fast.)
• 01:16, 16 February 2024 98.195.211.0 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I used a hot air station to unsolder and solder it into place)
• 11:27, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (Got my X1003 working with my rpi5 using a "with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD", and cloned the boot microSD to it using my Gerling's rpi-clone script. The RPI5 doesn't want to boot from the NVMe even tho the 6 was added to the boot order line in the eeprom and the PCIE_PROBE=1 is in ther.)
• 10:14, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (UPDATE!! RETURNED the KINGSPEC nvme. It was making it so that the X1003 had NO LIGHTS illuminated. Replaced it with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD from amazon [WORKS even tho it has Phison E19 controller]. It arrived today, i put it in the X1003 and i had lights. I added the 6 to the end of the boot order in the eeprom. Device showed up. I ran the rpi-clone script (geerling's from his git). It went through all the glorious cloning motions. Now i'm just working on getting the rpi...)
• 04:33, 15 February 2024 74.203.198.222 talk posted a new comment on X1003 (CL1-3D128-Q11 NVMe SSSTC 128GB is working great, although it is small. Never seen a pi run so fast.)
• 02:58, 15 February 2024 188.77.122.153 talk posted a new comment on X1003 (Yo he probado con un KingSpec M.2 NVMe 512 GB 2242 y reconoce la unidad, las luces permanecen encendidas, copia la SD al SSD sin problemas, pero luego no arranca desde el PCIe. ¿alguna solución?)
• 03:18, 14 February 2024 77.136.66.21 talk posted a new comment on X1003 (Works well with SSD SK Hynix BC711 512go 2242) Tags: Mobile web edit, Mobile edit
• 19:56, 13 February 2024 207.173.135.189 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 ([SOLVED] Errors booting from NVME with X1002 base and Crucial T500 Gen4 NVMe. Symptoms: Either: 1. *Extremely long* boot times (~240 seconds) with pcieport and nvme errors in dmesg including: [ 4.230345] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 4.230359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 4.230362] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 [ 4.230366...)
• 13:48, 12 February 2024 175.143.167.98 talk posted a new comment on X630 (Does the X630-A2 audio board work with PiKVM V2 DIY (using X630 and X630-C1 case)? Is any additional configuration required like on PiKVM-A3 or should this just work with pikvm without additional configuration?)
• 13:30, 12 February 2024 45.46.196.207 talk posted a new comment on X729-Software (Is there any information and demo script on the current/voltage/power monitor data from address 40?)
• 10:05, 12 February 2024 76.158.60.16 talk posted a new comment on M400 (Don't purchase this product. Run This documentation is useless. They don't even show a picture of how to connect the ribbon cable.)
• 23:36, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Found it in the FAQ in the main page: A: The X1000 does not reserve the nut column to fix the 2230/2242/2260 SSD. Based on our test, you can secure the 2230/2242/2260 SSD using an M2*6mm screw and 2pcs M2 nuts. Place one M2 nut under the SSD, then use the M2*6mm screw and the other M2 nut to fasten the SSD.)
• 23:09, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Also need standoff for 2242 size ssd. It appears that the 2280 standoff is permanently mounted to the X1001.)
• 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on X-C1 Software (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
• 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
• 13:31, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Work with debian?)
• 03:51, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (I mean 2230 or 2242)
• 03:50, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (How to fix a 2240 nvme ssh.. there is a hole but no fix for the screw)
• 21:31, 10 February 2024 185.228.19.78 talk posted a new comment on X1002 (Would this support the Coral M.2 Accelerator B+M key, aka Edge TPU?) Tags: Mobile web edit, Mobile edit
• 21:20, 10 February 2024 185.228.19.78 talk posted a new comment on PiKVM-A3 (Any plans to update the KVM-A3 case for Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
• 21:10, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (More specifically, an updated P165-B for rpi5?) Tags: Mobile web edit, Mobile edit
• 21:07, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (Any plans to release a version of this for the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
• 21:05, 10 February 2024 185.228.19.78 talk posted a new comment on P122 (What is the height of the top heatsink piece? And bottom heatsink piece? I assume I could use either/or?) Tags: Mobile web edit, Mobile edit
• 20:25, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (Same here, I get about 60MB/sec. Not what I would expect from PCIe. In my old case with USB bridge I get more than 110 MB/sec with the same drive.) Tags: Mobile web edit, Mobile edit
• 20:24, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (It works, but performance is awful. I have double the speed on my RPi4 in Argon40 NVME case and that is only using USB bridge and not PCIe. I'm deeply disappointed by the X1001...) Tags: Mobile web edit, Mobile edit
• 14:00, 10 February 2024 50.37.95.233 talk posted a new comment on X1001 Hardware (Can you please post the correct mounting screw size for 2242 ssd?) Tags: Mobile web edit, Mobile edit
• 12:45, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (Which Phison controller is the problem? E21 or E13? Or BOTH??)
• 12:33, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (does NOT work with KINGSPEC NX 2230 512GB -- this PCIe m-keyed m.2 nvme makes the lights on the X1003 go out.)
• 06:37, 10 February 2024 47.152.127.211 talk posted a new comment on X-UPS1 (Can you post example usage of the PH2.0 signal cable connector and the external momentary switch connector.)
• 05:41, 10 February 2024 108.193.152.114 talk posted a new comment on X1001 (I'm able to crimp my own JST-to-DuPont cables. Could I just power the X1001 via the GPIO pins with such a cable?)
• 00:44, 10 February 2024 188.250.82.104 talk posted a new comment on X882 (Hello, how can I use the power button on the board? Do I have to connect the power to the board? Because it is currently being powered by the Pi4) Tags: Mobile web edit, Mobile edit
• 23:13, 9 February 2024 82.220.82.107 talk posted a new comment on X1002 (Same here: those 4 standoffs have been implemented as M2. That will no longer fit the screws and / or the 4 5mm feet. In my delivery it says X1002 V1.1 - maybe te problem is in all deliveries with V1.1 ??)
• 07:05, 9 February 2024 98.168.105.253 talk posted a new comment on X708-A1 (Is there a drawing or 3d model for this board? I need to 3d print a custom case for it. Thanks!!)
• 05:24, 9 February 2024 96.88.172.9 talk posted a new comment on X630 (How long will this product be in production/be supported?)
• 10:52, 8 February 2024 108.238.59.28 talk posted a new comment on H508 (Can I purchase the H508 copper pad? Just need the copper pad.)
• 10:37, 8 February 2024 98.60.21.52 talk posted a new comment on X1002 (Just received my unit and the M2.5x10mm screws do not fit in the X1002--it seems like the integrated standoffs were tapped incorrectly. The screws fit fine in the M2.5x5mm gold standoffs. Anybody else have this issue--am I crazy? I've done many M2.5 projects.)
• 13:46, 7 February 2024 38.45.128.198 talk posted a new comment on X1003 (Lexar SSD Play 1TB showed up, successfully configured as the only disk and booted from it. Using test script from "Benchmark ssd on linux: How to measure the same things as crystaldiskmark does in windows" on Unix StackExchange. Results: Sequential Q32T1 Read: 407MB/s [ 12 IOPS] Sequential Q32T1 Write: 407MB/s [ 12 IOPS] 4KB Q8T8 Read: 397MB/s [ 99319 IOPS] 4KB Q8T8 Write: 394MB/s [ 98554 IOPS] 4KB Q32T1 Read: 392MB/s [ 98225 IOPS] 4KB Q32T1 Write: 367MB/s [ 91838 IOPS] 4KB...)
• 08:32, 6 February 2024 47.220.145.84 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (How do you change the nut from the 2242 position to the 2230 position?)
• 05:24, 6 February 2024 93.226.210.72 talk posted a new comment on X1003 (Transcend MTE400S 1 TB NVMe PCIe Gen3 x4 M.2 2242 (TS1TMTE400S) seems not to be compatible. First installation tests succsessfully. Image copy worked, but lot of error messages while booting. Raspi freezes after boot. Booting with an usb nvme-adapter was successfull. No errors.)
• 02:59, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (oha ... flushed a new eeprom and VOILA now it works :-))
• 02:31, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (hi from vienna, i have no luck till now withj the x1002: * first i had a WD black 770 and read that this is on the incompatible list * returned it and ordered a crucial t500 1TB nvme ssd but still there is NO reaction (no blue light, nothing reported in lspci,..) looks like the x1002 is not found / connected / or ist just plain dead * did the edits as described above in boot/config.txt * no success any advice please cheerz)
• 19:23, 5 February 2024 45.89.242.200 talk posted a new comment on X1004 (Will the Coral M2 card run on this current firmware?) Tags: Mobile web edit, Mobile edit
• 11:40, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive PCIE 2 Category Test Result HDParm Disk Read 419.51 MB/sec HDParm Cached Disk Read 412.94 MB/sec DD Disk Write 284 MB/s FIO 4k random read 106113 IOPS (424455 KB/s) FIO...)
• 08:17, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive also works)
• 04:38, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (However I do not see #36 light up. What did I miss ? -> If #36 is missed, check if all jumper pins align. -> Unscrew the screws and re-align the Pi. -> Push down on the Pi so you can feel the pogo pins bounce. -> While holding down the Pi, tighten the screws.)
• 03:29, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (I enabled i2c and rebooted the machine. Battery is charging. $ sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
• 01:42, 5 February 2024 108.238.59.28 talk posted a new comment on H508 (Yes. I want just the H508 copper pad.) Tags: Mobile web edit, Mobile edit
• 18:56, 4 February 2024 94.209.37.161 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (While following the instructions I noticed the following messages in dmesg: pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 pcieport 0000:00:00.0: [12] Timeout I am running the latest eeprom CURRENT: Fri 5 Jan 15:57:40 UTC 2024 (1704470260) LATEST: Fri 5 Jan 15:57:40 UTC 2024 (17044702...)
• 11:04, 4 February 2024 Walker talk contribs posted a new comment on H508 (Just need the H508 Copper Pad?)
• 07:03, 4 February 2024 172.58.102.215 talk posted a new comment on X1200 (Can Raspberry Pi 5 be powered thru the XH2.54 2-pin 5V Out connector only?)
• 10:37, 3 February 2024 108.238.59.28 talk posted a new comment on H508 (Where can I buy just this item?)
• 10:22, 3 February 2024 Walker talk contribs posted a new comment on X735-script (May I ask which version of X735 you are using?Can you provide your order number easily? You can contact us by email: '''support@geekworm.com ''')
• 00:10, 3 February 2024 202.184.232.23 talk posted a new comment on X735-script (Hi, I've followed through the instructions but even after keying in the command "sudo systemctl start x735-fan" the pwm fan is not turning on. Please help)
• 21:04, 2 February 2024 131.147.76.85 talk posted a new comment on X1003 (Did you develop it using only HV2000?)
• 21:03, 2 February 2024 131.147.76.85 talk posted a new comment on X1003 (It seems that gekworm does not have the recommended SSD.)
• 15:16, 2 February 2024 Walker talk contribs posted a new comment on P580 (Hi,The P580 will be available for sale on Amazon shortly, you can buy it on Amazon)
• 15:15, 2 February 2024 Walker talk contribs posted a new comment on P394 (Hi, I'm sorry for the inconvenience, the Raspberry Pi 5 motherboard is just the right size to fit in, there shouldn't be any problems, can you provide us with some pictures?)
• 15:11, 2 February 2024 Walker talk contribs posted a new comment on X1003 (Lexar Play 1TB NVME or HV2000 NVME SSD)
• 15:08, 2 February 2024 Walker talk contribs posted a new comment on X1002 (Thanks for sharing!)
• 14:25, 2 February 2024 162.231.24.243 talk posted a new comment on P580 (Amazon carrying P579 for HatDrive Top mount. No P580 offering on Amazon. Ordering X1002 would have liked to get the P580 as well. 10-18 days shipping from geekworm.com - unfavorable. Too much time passing means crushed or mangled product on delivery, if no delay. Rocky, aka anonymous #3)
• 14:03, 2 February 2024 162.231.24.243 talk posted a new comment on P580 (Amazing similarity between this and very recently assemblage of Orange Pi 5+, with Active Heatsink and, Case. It's case ID is N580. Assembly of this case with X1002 NVMe Board will be a relief,from that struggle.)
• 13:06, 2 February 2024 104.28.48.215 talk posted a new comment on P394 (Total crap. The 2nd layer is supposed to be sized to let the Raspberry Pi 5 board to fix inside it. It’s too narrow. I would have to file it larger in order to use this.) Tags: Mobile web edit, Mobile edit
• 06:15, 2 February 2024 173.52.114.153 talk posted a new comment on X1003 (what do the leds mean? i have 2 blue ones, but i cant see the nvme)
• 05:49, 2 February 2024 173.52.114.153 talk posted a new comment on X1003 (Can you suggest a compatible m2? apparently the one that i bought is not compatible.)
• 04:04, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Whoops. Replied to wrong post. But in answer to your question...Yes, the X1002 supports 3.0, though Pi doesn't officially support more than 2.0. Its a matter of trying your SSD at 3.0 and seeing if its stable. Personally, I wouldn't risk it.)
• 04:01, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted. Blue light now on on X1002 and drive recognised by Pi.)
• 04:00, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted. Blue light now on on X1002 and drive recognised by Pi.)
• 03:46, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Pi nub here. Just installed one of these with an XPG SX8200 Pro 1TB SSD and it doesn't seem to work. Amended config.txt OK. What should I be seeing with lspci, or what other way can I check its installed ok?)
• 13:31, 1 February 2024 38.45.128.198 talk posted a new comment on X1003 (With Corsair M600 1TB: nvme0n1 showed up in my lsblk, but with a size of 1 MB. Doesn't appear to be compatible. I see now that it has a Phison E21T controller, along with almost every other SSD I can find. I'll try the Lexar Play 1TB the other commenter successfully used.)
• 10:08, 1 February 2024 Walker talk contribs posted a new comment on X1002 (Hi, we haven't tested this SSD, but according to buyers' feedback, the X1002 is compatible with Samsung 970 evo m.e nvme)
• 10:07, 1 February 2024 Walker talk contribs posted a new comment on X1001 (Thanks for sharing!)
• 10:05, 1 February 2024 Walker talk contribs posted a new comment on NASPi CM4-M2 (OK, thank you for your interest in our products)
• 10:03, 1 February 2024 Walker talk contribs posted a new comment on P580 (Hello may I ask what country you are in? It's available in the US right now, and will be available in Europe soon!)
• 04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Does this support PCIe 3.0?) Tags: Mobile web edit, Mobile edit
• 04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Samsung PM981A will work with this?) Tags: Mobile web edit, Mobile edit
• 22:47, 31 January 2024 69.27.21.151 talk posted a new comment on X1001 (First attempt failed. Had to use the Raspberry Pi eeprom fix and retry. Solution: Make eeprom changes after copying the OS to the SSD. First try would not boot from SD if no OS existed on SSD.)
• 20:47, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (It is all working now. I had inserted the SSD upside-down.)
• 20:32, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (By the way I am using this SATA SSD, Western Digital Blue SA510 1TB M.2 2280 SATA III SSD (WDS100T3B0B))
• 19:37, 31 January 2024 131.147.76.85 talk posted a new comment on X1003 (Are there any SSDs that have been tested by gekworm? I would like to know that.)
• 19:13, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (Hi, I am using both slots with 1Tb SSDs. The NVME SSD is working but the system does not see the SATA SSD. Is there a special process to set this up? Are there cli commands to debug this? Here are a few dumps. kaza007@pinas:~ $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.1G 0 disk ├─mmcblk0p1 179:1 0 256M 0 part /boot └─mmcblk0p2 179:2 0 28.9G 0 part / mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk nvme0n1...)
• 15:21, 31 January 2024 172.58.208.221 talk posted a new comment on P580 (When will Amazon have this item in stock?)
• 11:17, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (Using a RPI 5 with Geekworm X1003 and a Lexar Play 1TB NVME m.2 SSD Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
• 11:13, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (With Lexar Play 1TB NVME m.2 2230 ssd: Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
• 10:18, 31 January 2024 Harry talk contribs posted a new comment on How to update eeprom firmware (Hi, <pre> sudo apt update sudo apt upgrade sudo rpi-eeprom-update -a </pre> 1. above commad will update the bootloader to the last versin; 2. Run the '''lspci''' to check the ssd controler manufator. and the '''Phison ''' controler is incompatible.)
• 10:15, 31 January 2024 Harry talk contribs deleted comment #4346 on How to update eeprom firmware
• 10:03, 31 January 2024 Walker talk contribs posted a new comment on X1003 (We are now also collecting feedback from our buyers in order to provide it to other buyers)
• 10:01, 31 January 2024 Walker talk contribs posted a new comment on X1003 (Hi, according to buyer feedback, the Lexar Play M.2 2230 NVMe 1TB SSD is compatible with the X1003)
• 00:29, 31 January 2024 71.237.126.49 talk posted a new comment on Raspberry Pi 5 Model B (Your site does not allow me to register. I am reporting POSITIVE information/news. I have purchased an rpi5, your nvme shield X1000 v1.5, AND a Sabrent Rocket Nano NVME PCIe Gen3x4 M2 2242 SSD (512 GB). It uses a PHISON PS5013 E13 NVME controller (rev 01). IT WORKS GREAT using dtparam=pci_ex1 (have not tried speeding it up). Hope this info is useful for your database. I noted that you had problems with Phison controllers in the past. Regards, Rick rstiphout@live.com)
• 22:04, 30 January 2024 131.147.76.85 talk posted a new comment on X1003 (Can you tell us which SSDs you have confirmed to be working properly?)
• 11:19, 30 January 2024 Harry talk contribs posted a new comment on X1002 (800px)
• 11:18, 30 January 2024 Harry talk contribs deleted comment #4292 on X1002
• 11:16, 30 January 2024 Harry talk contribs deleted comment #4267 on X1002
• 11:15, 30 January 2024 Harry talk contribs deleted comment #4259 on X1002
• 11:02, 30 January 2024 Walker talk contribs posted a new comment on X306 (Thank you for your trust in our products!)
• 10:59, 30 January 2024 Walker talk contribs posted a new comment on X1201 (Yes, the x1201 is connected to the Raspberry Pi via pogo pins, no additional wires are needed!)
• 10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: <pre> sudo rpi-eeprom-config --edit </pre> Add PCIE_PROBE=1 line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
• 10:51, 30 January 2024 Harry talk contribs deleted comment #4348 on NVMe SSD boot with the Raspberry Pi 5
• 10:51, 30 January 2024 Harry talk contribs deleted comment #4321 on NVMe SSD boot with the Raspberry Pi 5
• 10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: sudo rpi-eeprom-config --edit Add '''PCIE_PROBE=1''' line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
• 10:12, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I reinserted the zif cable and now the WD_Black SN770 shows up on my desktop. However, I don't believe the test is using that drive, it is still terribly slow, like 60 MB/sec. So I think it is using the microSD.)
• 09:53, 30 January 2024 Walker talk contribs posted a new comment on How to update eeprom firmware (X1003, you can refer to it here:https://wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5 Hope it can help you)
• 09:50, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I thought maybe I had just the wrong SSD, but I spent some more money and bought a WD_Black SN770 and though the test in both PCIE 2 and 3 modes give an answer, they are terribly slow and I suspect it is running the test on the microSD card and not the SSD. I don't think this is working at all.)
• 09:47, 30 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hello, X728 V2.5 is not applicable to Raspberry Pi 5, please refer to UPS series products for Raspberry Pi 5 X1200 X1201 X1202)
• 09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
• 09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
• 09:39, 30 January 2024 Walker talk contribs posted a new comment on P579 (Metal cases generally have some degree of impact on WiFi and Bluetooth)
• 05:45, 30 January 2024 207.173.135.189 talk posted a new comment on P579 (To what extent does this P579 case reduce WiFi and Bluetooth signal strength?)
• 21:18, 29 January 2024 77.20.74.142 talk posted a new comment on X728-Software (Can the raspberry still be safely restarted with `sudo reboot`?)
• 11:51, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（By the way, provide your order number）)
• 11:49, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Yes, only comes with 2242 fixing screws, if you need to install 2230, you need to prepare your own tools.)
• 11:49, 29 January 2024 68.61.201.10 talk posted a new comment on X728-Software (Why would it randomly stop shutting down fully? I've tried this firmware and countless others. 2 that use to work. x728off doesnt work.)
• 11:48, 29 January 2024 Walker talk contribs posted a new comment on P580 (The distance between the X1002 and the bottom of the enclosure is 6mm, so it is recommended that you choose an NVMe cooler that is smaller than 6mm.)
• 03:58, 29 January 2024 64.135.211.168 talk posted a new comment on X1003 (Is there some reason this should fail to work when using the raspberry pi imager UBUNTU image? i've followed all of the directions i can find here and on the internet and nothing works.)
• 01:45, 29 January 2024 90.191.18.190 talk posted a new comment on X306 (I was hesitant to buy this product because of some of the comments but I am glad I bought it. It is exactly what I need. I had a spare battery lying around without use, so I needed a UPS hat. The USB hub was a great extra. But, many comments here and reddit posts complained about USB hub not working. I had an impression that it is not working for everyone. But I can confirm, it is working for me. lsusb detects my usb drives (sandisk cruzer blade) and I can mount them. So if you needed a confi...)
• 18:24, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (Got it. No need for spacers, or wires. Connects directly to pogo pins on the pi when screwed on.)
• 18:01, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (How do you connect the UPS HAT to the raspberry pi? Only screws and spaces are included...)
• 12:11, 28 January 2024 64.135.211.168 talk posted a new comment on How to update eeprom firmware (sudo lsblk isn't showing the X1003 or the 2230 m-keyed m.2 nvme 512GB kingspec storage i added. neither is sudo lspci. i added the required lines to my raspberry pi 5b /boot/firmware/config.txt file and rebooted. EEPROM claims to be at the latest accordin to sudo rpi-eeprom-update -a . Pretty disappointed. Everything was VERy carefully installed. BOOTLOADER: up to date CURRENT: Mon Sep 25 10:44:03 UTC 2023 (1695638643) LATEST: Mon Sep 25 10:44:03 UTC 2023 (1695638643) RELE...)
• 11:11, 28 January 2024 64.135.211.168 talk posted a new comment on X1003 (it only comes with the ability to mount a 2242. there is no not supplied for 2230.) Tags: Mobile web edit, Mobile edit
• 04:39, 28 January 2024 84.52.56.212 talk posted a new comment on X728-hardware (Hi, Can you please clarify if the X728 V2.5 complies with the new Raspberry Pi 5 HW platform and the latest 64 bits OS Debian version: 12 (bookworm)? Can the scripts be used and installed at the same way? Thanks, Artur)
• 21:40, 27 January 2024 157.97.134.12 talk posted a new comment on P580 (What NVMe heatsink height will fit in this case?) Tags: Mobile web edit, Mobile edit
• 20:13, 27 January 2024 Nahumb talk contribs posted a new comment on X1001 (Hello, Can you please provide any 3D model file of the X1001? Thank you, Nahum Budin.)
• 20:11, 27 January 2024 Nahumb talk contribs posted a new comment on X1201 (Hello, Can you please provide any 3D model file of the X1201? Thank you, Nahum Budin.)
• 17:06, 27 January 2024 Walker talk contribs posted a new comment on X1003 (Thanks for sharing.)
• 12:30, 27 January 2024 Walker talk contribs posted a new comment on P579 (Hi, this P579 case is compatible with the official Raspberry Pi Active Cooler , X1000 X1001 X1003 comes with FFC Cable)
• 12:29, 27 January 2024 Walker talk contribs deleted comment #4322 on P579
• 12:28, 27 January 2024 Walker talk contribs posted a new comment on P579 (Hi, this P579 case is compatible with the official Raspberry Pi Active Cooler ,X1000 X1001 X1002 X1003 comes with FFC Cable)
• 12:22, 27 January 2024 Walker talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thank you very much, we're sure it will help others!)
• 12:20, 27 January 2024 Walker talk contribs posted a new comment on X735 (X735 V3.0 have the auto on jumper)
• 12:20, 27 January 2024 Walker talk contribs deleted comment #4319 on X735
• 12:20, 27 January 2024 Walker talk contribs posted a new comment on X735 (X735 V3.0 have the auto on)
• 09:19, 27 January 2024 71.121.201.60 talk posted a new comment on X1003 (Currently using with a Lexar Play M.2 2230 NVMe 1TB SSD. Works perfectly, boots Raspberry Pi OS with no issues. Running Gen 3 speed set in config.txt. Used 3M double-sided tape to hold SSD to X1003 adapter.)
• 07:15, 27 January 2024 24.47.197.145 talk posted a new comment on P579 (What about the cable and the heat sink?) Tags: Mobile web edit, Mobile edit
• 06:46, 27 January 2024 77.172.124.17 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (If the nvme is not recognised after adding dtparam=pciex1 to config.txt, add PCIE_PROBE=1 to the eeprom. That made my pi see the nvme.)
• 18:38, 26 January 2024 84.165.56.4 talk posted a new comment on X735 (does the X735 V3 also have a auo poweron jumper?)
• 18:27, 26 January 2024 Walker talk contribs posted a new comment on NASPi CM4-M2 (The 2 pins right above the OTG are AON (auto power-on), you can use the jumper cap to realize his function.)
• 01:00, 26 January 2024 99.40.7.152 talk posted a new comment on NASPi CM4-M2 (What purpose does the AA pin-pair on the front right of the board, immediately above the OTG pin-pair, serve?)
• 10:56, 25 January 2024 Walker talk contribs posted a new comment on X1001 (Hello, you can contact our technical support at '''support@geekworm.com ''' , By the way, provide your order number)
• 10:51, 25 January 2024 Walker talk contribs posted a new comment on X728 (Hello, we can't provide this, and we also need to remind you that X728 can't be used on Raspberry Pi 5, about UPS for Raspberry Pi 5 please refer to: X1200 X1201 X1202)
• 10:47, 25 January 2024 Walker talk contribs posted a new comment on X1001 (Thank you very much for your advice, we are sure it will help others!)
• 10:45, 25 January 2024 Walker talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks a lot for the advice.)
• 10:31, 25 January 2024 Walker talk contribs posted a new comment on X1003 (Hi, X1003's recommended drives , in general, are compatible, only some types of drives are not compatible, please refer to '''Important Notes ''', we are currently collecting feedback from buyers as well.)
• 10:24, 25 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hello, X728 V2.3 is not applicable to Raspberry Pi 5, please refer to UPS series products for Raspberry Pi 5: X1200 X1201 X1202)
• 09:23, 25 January 2024 65.78.155.208 talk posted a new comment on PiKVM-A3 (Can relevant product dimensions be provided so I can design my own 3d printed case for this product?)
• 08:59, 25 January 2024 68.55.76.208 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Not listed here but should be - you should also add the following line under the BOOT_ORDER line when configuring the eeprom: PCIE_PROBE=1 My Raspberry Pi 5 would see the NVMe SSD, but would not boot from it without this line. Using an SK Hynix PC601 256GB NVMe SSD)
• 01:01, 25 January 2024 46.116.2.227 talk posted a new comment on X728-hardware (Hi, Can you please clarify if the X728 V2.3 complies with the new Raspberry Pi 5 HW platform and the latest 64 bits OS Debian version: 12 (bookworm)? Can the scripts be used and installed at the same way? Thanks, Nahum Budin.)
• 00:50, 25 January 2024 136.62.159.27 talk posted a new comment on X1003 (Can you add a list of recommended drives that are known good?) Tags: Mobile web edit, Mobile edit
• 22:57, 24 January 2024 99.242.62.166 talk posted a new comment on X1001 (This doesn't look right. morey@rpi5:~ $ dd if=/dev/zero of=./Testingfile bs=100M count=10 oflag=direct dd if=./Testingfile of=/dev/zero bs=100M count=10 oflag=dsync 10+0 records in 10+0 records out 1048576000 bytes (1.0 GB, 1000 MiB) copied, 2.72273 s, 385 MB/s 10+0 records in 10+0 records out 1048576000 bytes (1.0 GB, 1000 MiB) copied, 2.61485 s, 401 MB/s Any ideas on what is wrong?)
• 12:22, 24 January 2024 174.84.18.78 talk posted a new comment on X728 (Please provide the STP file / CAD / measurement diagram so we can build a rear plate that accommodates both the PI4/5 and the UPS power connector. I do realize you already have your own case. Ours is completely different so we need the measurements. Thank you!)
• 05:09, 24 January 2024 184.179.162.35 talk posted a new comment on X1001 (Since the Pi passed the Gen 3 test, I went back and enabled the gen 3 (dtparam=pciex1_gen=3) in the config.txt file. Rebooted and it now mounts the SSD. Hope this helps.)
• 04:59, 24 January 2024 184.179.162.35 talk posted a new comment on X1001 (Same here. Get results for the speed test, but unable to mount SSD. WD_Black SN770 (Sandisk controller))
• 10:44, 23 January 2024 Walker talk contribs posted a new comment on X728 (Hi, can't use X728 on Raspberry Pi 5 ，The Raspberry Pi 5 has a dedicated UPS board.)
• 03:37, 23 January 2024 82.136.115.110 talk posted a new comment on X1002 (I also have Kingston NV2 on X1002. No problems)
• 23:10, 22 January 2024 5.203.151.99 talk posted a new comment on X728 (Hi, can i use x728 with pi5? I have 2 hats and i want to know.) Tags: Mobile web edit, Mobile edit
• 15:17, 22 January 2024 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, X822 we don't sell it anymore, there is not enough space inside the Naspi Gemini 2.5 case to fit the UPS HAT, about the UPS board for Raspberry Pi 4, you can refer to the x703 X728 X708 X729)
• 15:05, 22 January 2024 Walker talk contribs posted a new comment on U100 (Hi, the product U100 is no longer available, can you provide me with your order number?)
• 15:02, 22 January 2024 Walker talk contribs posted a new comment on X728 (Hi, Raspberry Pi 5 UPS series, please refer to the X1200 X1201 X1202)
• 14:59, 22 January 2024 Walker talk contribs posted a new comment on X1002 ({{NVMe SSD Incompatibility List}})
• 14:58, 22 January 2024 Walker talk contribs posted a new comment on X1002 (Hi, since we can't test all SSD models, we've only tested which SSDs may be incompatible at this time!)
• 14:54, 22 January 2024 Walker talk contribs posted a new comment on P122 (Hi, we understand what you mean, you are talking about programming through scripts to realize the control of fan speed through GPIOs, but we haven't tested it so far.)
• 07:00, 22 January 2024 217.229.145.164 talk posted a new comment on NASPi Gemini 2.5 (As the question of Anonymous user #9 10 months ago is still not answered, I also ask: Is there a compatible UPS HAT or module with X822 and relative Naspi Gemini 2.5 case?)
• 00:42, 22 January 2024 162.221.219.52 talk posted a new comment on X1001 (It says that New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. But does not give instructions or links as to how to do that. I have installed a 1TB drive and gotten it to give me the speeds using the test, but it doesn't show up as a drive to choose. The drive is a crucial PD PCIe 3.0 NVMe M.2 SSD)
• 18:30, 21 January 2024 46.147.215.89 talk posted a new comment on U100 (Hello. The U100 board has SCL, SDA, PRE_ON_OFF, POW_OFF and IO_FAN outputs. Describe what they are for and how to use them.)
• 02:49, 21 January 2024 5.203.151.99 talk posted a new comment on X728 (Any news from Pi5 and x728?) Tags: Mobile web edit, Mobile edit
• 07:38, 20 January 2024 136.38.104.187 talk posted a new comment on X1002 (is the fikwotfsn501 pro its a pci gen3x4 compatable)
• 20:10, 19 January 2024 49.215.90.190 talk posted a new comment on P122 (for example, i can make a script that reads the temperature of the processor or other chips. if the temperature is over 40°C, the fan activates by providing 3.3V, and as the temperature rises, the voltage rises to 5V max as well when it reaches 60°C (or if dynamic voltage control is not possible, i can replace the temperature rising part to 3.3V static))
• 20:04, 19 January 2024 49.215.90.190 talk posted a new comment on P122 (i see. I understand it as "the speed is controlled by voltage". so i think maybe i can make it active cooling with auto fan speed control with script that controls GPIO which can control the voltage in a range of 0V、3.3V~(/)5V? just a assumption. i'm wondering if it's prohibited to do so.)
• 18:34, 19 January 2024 Walker talk contribs posted a new comment on P122 (Please note the connection of the fan 500px|How to connect)
• 18:28, 19 January 2024 Walker talk contribs posted a new comment on X728-script (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（By the way, provide your order number）)
• 18:25, 19 January 2024 Walker talk contribs posted a new comment on P122 (Hello, this P122 version with fan is to control the fan via GPIO.)
• 18:23, 19 January 2024 Walker talk contribs posted a new comment on P122 (Hi, this doesn't really matter much, shield or the chip are both viable)
• 13:28, 19 January 2024 120.127.182.112 talk posted a new comment on P122 (Oh and, is it ok if i use GPIO to control the fan so i can make it active cooling? wondering if it's possible. I'm currently thinking use GPIO direct control, use a transistor, or a relay+transistor)
• 13:24, 19 January 2024 120.127.182.112 talk posted a new comment on P122 (hi, i also own this case. i'm wondering if, my thermal tape happens to have one side double-side-taped, should i attach the glued part to the shield or the chip? thx!)
• 21:42, 18 January 2024 98.235.40.60 talk posted a new comment on X728-script (Version 2.5)
• 15:36, 18 January 2024 147.161.229.99 talk posted a new comment on PiKVM-A8 (Hello together is the fan directly connected to 5V or is there a way to enable or disable the fan. The original fan started making noises, since it is only needed when accessing the KVM it would make sense to make it switchable.)
• 14:53, 18 January 2024 Walker talk contribs posted a new comment on X1001 Hardware (Hi, we will collect feedback from our customers,, as ssd is currently of many types, and we will also organize information on compatible SSD models.)
• 11:15, 18 January 2024 Walker talk contribs posted a new comment on X735-script (Hi, X735 V3.0 after installing the script, it is controlling the RPM by temperature, this default temperature will be reflected in the script, you can check the script)
• 10:58, 18 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, which version of x728 are you using?)
• 07:09, 18 January 2024 98.235.40.60 talk posted a new comment on X728-script (Can anybody help?)
• 06:41, 18 January 2024 173.88.121.145 talk posted a new comment on X1001 Hardware (Can you please post what NVMe SSD are valid. Listing only not valid does not help.)
• 17:26, 17 January 2024 78.42.75.101 talk posted a new comment on X735-script (Hi, have the same issue like user #7: just received everything including the X735 v3.0 I installed umbrel latest version 0.5.4 I used the script (that installed with no errors) the fan starts after reboot for 4 seconds and then stops. CPU Temp. is 54°C. What temp. the fan should run? Need help. Do you have any suggestion?)
• 11:58, 17 January 2024 Walker talk contribs posted a new comment on PiKVM (Hi, which product are you talking about? KVM-A4?)
• 11:56, 17 January 2024 Walker talk contribs posted a new comment on X1002 (Thanks for the detailed explanation, this will help others! We also recently tested some NVMe m.2 SSD {{NVMe SSD Incompatibility List}})
• 11:51, 17 January 2024 Walker talk contribs posted a new comment on X400 V3.0 (Hello, Could you please provide us with your order number? then you can contact us via our email: '''support@geekworm.com ''')
• 05:19, 17 January 2024 62.85.13.240 talk posted a new comment on X1002 (Kingston NV2 M.2 1TB works fine for me. Not sure what "Gen" is it. Received today X1002 and migrated everything on SSD and made it bootable without an issue. If you are struggled with driver not recognized in "lspci" check if you made everything right in "/boot/configuration.txt" by enabling PCIe port.)
• 04:54, 17 January 2024 49.37.243.69 talk posted a new comment on PiKVM (Can I stack another HAT on top, like IQaudio DAC. Which pins does the hdmi audio and oled use ?) Tags: Mobile web edit, Mobile edit
• 15:26, 16 January 2024 37.33.156.26 talk posted a new comment on X1002 (Confirmed kingston NV2 not work in X1002. Usually nvme works 3.3v 2.8A but Kingston NV2 may take more amps.) Tags: Mobile web edit, Mobile edit
• 02:06, 16 January 2024 187.209.92.61 talk posted a new comment on X400 V3.0 (q1. The speakers has no sound? I plug my headphones to listen music, and now the speakers has no sound? The amp Jumper is open.) Tags: Mobile web edit, Mobile edit
• 23:34, 15 January 2024 223.16.119.5 talk posted a new comment on X652 (how to connect to the local monitor?)
• 10:56, 15 January 2024 Walker talk contribs posted a new comment on T201 (Hi, Jetson Orin Nano 8gb There are currently no products with similar features to the T201)
• 10:48, 15 January 2024 Walker talk contribs posted a new comment on X1002 (Hi, it's generally Supports 2230/2242/2260/2280 NVMe M2 SSDs. and generally there are no compatibility issues)
• 19:24, 14 January 2024 37.33.20.129 talk posted a new comment on X1002 (Does X1002 support: Kingston NV2 M.2 NVMe Gen 4 1TB)
• 18:49, 14 January 2024 86.158.39.181 talk posted a new comment on T201 (Awesome, do you make this for Jetson Orin Nano 8gb?)
• 04:02, 14 January 2024 98.235.40.60 talk posted a new comment on X728-script (The battery indicator lights do not light up. If I remove the batteries, then plug in the AC power, all 4 will light up, then the 100% light will blink a couple of times, then all lights will go out.)
• 12:02, 12 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, please see our FAQ: https://wiki.geekworm.com/X728-script#FAQ)
• 12:01, 12 January 2024 Walker talk contribs deleted comment #4254 on X728-script
• 12:01, 12 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, please refer to our FAQ: https://wiki.geekworm.com/index.php?title=X728-script&action=edit&section=13''' '''')
• 09:56, 12 January 2024 98.235.40.60 talk posted a new comment on X728-script (When I get to the part where you are supposed to check and review the i2c address, the x278 doesn't show up. If I skip that step, and try to clone the script github asks for a username and password.)
• 10:46, 11 January 2024 Walker talk contribs posted a new comment on P165 (Hi, the P165-B is for the Raspberry Pi 4B, the one that comes with it has thermal pads that are just right for the CPU and RAM, I don't know what's wrong with it, can you provide us with some pictures please? Can send to email at '''support@geekworm.com '''(by the way provide your order number))
• 01:39, 11 January 2024 93.41.237.150 talk posted a new comment on XScript (I wrote to support because after setting up the power service the Raspberry is stuck in a boot loop. According to support this is normal while the X-c1 hardware is not connected to the Raspberry. I think that this is a HUGE PROBLEM since the Raspberry becomes unusable if it's separated from the hardware or if the hardware should fail. I advise everyone to STAY AWAY from this script and possibly from the product: since the raspberry is stuck it's no longer possible to access it.)
• 01:34, 11 January 2024 37.201.213.47 talk posted a new comment on P165 (The P165-B cannot be installed on my Raspberry Pi 4 Model B because the block for the RAM is to thick even without the thermal pad. The heatsink sits on the RAM and wobbles in all directions) Tags: Mobile web edit, Mobile edit
• 17:55, 10 January 2024 Walker talk contribs posted a new comment on X735-script (Hi, we have tested Umbrel OS, if the pwm fan script is installed without errors, the fan is working fine, could you please provide us with more information? (e.g. video, your procedure), you can contact our tech support at '''support@geekworm.com ''''(by the way provide us your order number))
• 17:14, 10 January 2024 Walker talk contribs posted a new comment on X-UPS1 (Pls use high quality batteries from PANPASONIC, Toshiba, etc. Do not use the battery with built-in protection circuit. 700px)
• 09:08, 10 January 2024 68.205.83.233 talk posted a new comment on X735-script (Hi, just received everything including the X735 v3.0 I installed umbrel latest version 0.5.4 I used the script (that installed with no errors) but the fan are not running at all. Do you have any suggestion?) Tags: Mobile web edit, Mobile edit
• 05:31, 10 January 2024 109.250.130.185 talk posted a new comment on XScript (Same here. I installed the scripts on a Raspberry Pi 4B with DietPi (which is Debian under the hood). Fan script is working well, but the shutdown script only prints the downtime info and does nothing afterwards. Need some assistance here.)
• 14:32, 9 January 2024 107.192.107.159 talk posted a new comment on X-UPS1 (Hello, button top of flat top 18650? Protection circuit? For US users, it's be helpful to link to batteries on imrbatteries.com, as they specify many details like that.) Tags: Mobile web edit, Mobile edit
• 10:23, 9 January 2024 68.226.119.5 talk posted a new comment on X728 (I too would appreciate a 10-30 vdc input on the 5521 jack. It's easy to provide that range and let the x728 drop it to 5.1 +/-5%. It's much harder to build up an external 5.1 v 4 amp ps. I'd happily pay extra for that feature.)
• 17:53, 8 January 2024 Walker talk contribs posted a new comment on X728 (We just did a simple test, by unplugging or plugging in the USB-C port, the X728 V2.5 is able to restore the power , it is not clear what the exact cause of your situation, you can contact our technical support at '''support@geekworm.com ''' ,If possible, you can provide a video of your operation, so that we can more clearly understand the causes of the problem.(By the way, provide your order number))
• 11:05, 8 January 2024 Walker talk contribs posted a new comment on C296 (thank you)
• 22:15, 6 January 2024 86.38.74.3 talk posted a new comment on X728 (Hello, we looking for solution to softshutdown RPI4B when power fails and boot again when power restores in factory - over 100pcs. Can x728 achieve this function? Purchased one x728v2.5 for tests - installed exactly as instructed here but it behaves strange. Shoulddown action is ok, but when power restores it does no boot. If power removed and restored once again - RPI starts as expeted. Does anybody know what is that? Any cjances to resolve this? AUTO_ON jumper installed. Shutdown is done b...)
• 13:45, 5 January 2024 47.17.236.33 talk posted a new comment on C296 (The Heatsink feet are 0.090" off the surface of the heatsink. the Pi Zero 2017 has CPU about 0.050 and the copper pad was 0.030 think.. so a film of Heatsink compound of 0.005 per side will do it. THe Bluetooth was super tiny, and only 0.010 off the board. so i doubled up the thicker heat sink compound and let it rip. if it overheats, I'll slip in some copper strip between.)
• 11:00, 4 January 2024 Walker talk contribs posted a new comment on X735 (Hi, we haven't tested x735 on Raspberry Pi 5 yet, it should not work!)
• 10:55, 4 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hi, sorry, this belongs to the content of product design, this we have no way to provide)
• 10:55, 4 January 2024 Walker talk contribs deleted comment #4237 on X728-hardware
• 10:55, 4 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hi, I'm sorry, this belongs to the content of product design, this we have no way to provide)
• 10:49, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com ''')
• 10:49, 4 January 2024 Walker talk contribs deleted comment #4235 on X950 software
• 10:49, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com ''')
• 10:48, 4 January 2024 Walker talk contribs deleted comment #4234 on X950 software
• 10:48, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com '''')
• 10:45, 4 January 2024 58.11.52.17 talk posted a new comment on X950 software (I found that "IQaudIO DAC" works.)
• 07:22, 4 January 2024 68.50.12.65 talk posted a new comment on X735 (Will X735 v3.0 work with raspberry pi 5?)
• 23:03, 3 January 2024 109.43.240.199 talk posted a new comment on X728-hardware (Can you please provide details what each GPIO does (instead of just writing "Power Management")? I could figure out from some forum posts, that when GPIO12 goes low, the x728 should power down with some delay. In my case this is not working. The aim is to power down the Raspberry safely via "poweroff" and then cut the power. Again details to the funciton of the GPIOs would be great. Like for example "Pulling GPIO26 high for 2s cuts the power". Otherwise its guesswork from the scripts.)
• 21:58, 3 January 2024 58.11.52.17 talk posted a new comment on X950 software (On piCorePlayer 8.2.0 64-bit, I don't get any sound. I tried both "Audiophonics ISabre Q2M" and "RPi DAC")
• 18:13, 3 January 2024 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, KVM-A3 with 2.5x20, P165-B height of 11MM, normally, with 2.5 * 9 + 5 or 2.5 * 9 + 6 are feasible!)
• 15:39, 3 January 2024 27.116.208.36 talk posted a new comment on PiKVM-A3 (Just thought I'd confirm for anyone interested that the Raspberry Pi 4 11mm embedded heatsink (P165-B) is compatible with the KVM-A3 Kit using four 2.5x9+6 standoffs instead of the 2.5x20 standoffs included in the KVM-A3 Kit. The fan doesn't get in the way and everything fits perfectly.)
• 14:38, 2 January 2024 Walker talk contribs posted a new comment on X735-script (Hello, please provide your order number, then you can send it to our email: '''support@geekworm.com ''', we will solve the problem for you!)
• 14:38, 2 January 2024 Walker talk contribs deleted comment #4226 on X735-script
• 14:38, 2 January 2024 Walker talk contribs posted a new comment on X735-script (Hello, please provide your order number, then you can send an email to our email: '''support@geekworm.com '''')
• 14:33, 2 January 2024 Walker talk contribs posted a new comment on LVDS Adapter (It is not recommend to use with 4K TV as it may have some compability problem)
• 09:57, 2 January 2024 76.178.139.135 talk posted a new comment on LVDS Adapter (Anonymous User #25 asked why there were two LVDS inputs on some boards. I don't think of them as both inputs, they're just two sets of pins. I use the second set as an "output" to make sure that my LVDS signal still works by running it to a monitor.)
• 03:43, 31 December 2023 73.48.160.119 talk posted a new comment on X735-script (fan still not working. ran this on a new x735 v3.0)
• 04:49, 30 December 2023 89.24.40.197 talk posted a new comment on LVDS Adapter (Hello, it wil function with tv tcl 4k with mainboard 2x 30 pin? Thanks) Tags: Mobile web edit, Mobile edit
• 16:35, 29 December 2023 Harry talk contribs posted a new comment on X729 (not compatible with orange pi shield)
• 16:13, 28 December 2023 Walker talk contribs deleted comment #4219 on P511
• 16:12, 28 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is about 0.9 mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
• 16:07, 28 December 2023 Walker talk contribs deleted comment #4154 on P511
• 16:07, 28 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is 0.9 mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
• 17:10, 27 December 2023 93.41.237.150 talk posted a new comment on XScript (I have the same problem: RaspberryOS 64bit on Raspi4B 4Gb, wrote a mail to support. The last step is somehow wrong: it shuts down the Raspberry immedately and is then stuck in a boot loop.)
• 10:15, 26 December 2023 Walker talk contribs posted a new comment on X728 (Hi, currently, the Raspberry Pi 5 related products are under design, please wait for the update of our next products (we haven't tested X728 on Raspberry Pi 5))
• 19:28, 25 December 2023 5.203.156.160 talk posted a new comment on X728 (Hello, can i use x728 with Pi 5?) Tags: Mobile web edit, Mobile edit
• 11:19, 25 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at ： '''support@geekworm.com ''')
• 11:18, 25 December 2023 Walker talk contribs deleted comment #4214 on X728-script
• 11:18, 25 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at :'''support@geekworm.com '''')
• 11:14, 25 December 2023 Walker talk contribs posted a new comment on P394 (Hi, we have now changed the design and added a key button)
• 11:13, 25 December 2023 Walker talk contribs posted a new comment on P394 (Hi, the design principle of this acrylic case is like this, using 9 layers of acrylic stacked on top of each other, if you don't like this kind of design, you can consider our Pi 5 metal case: [https://www.aliexpress.us/item/3256806091879071.html?gatewayAdapt=glo2usa4itemAdapt''' ''' P573])
• 20:15, 23 December 2023 94.110.204.43 talk posted a new comment on P394 (It all feels compressed when mounted. The power buttonhole was not present. Had the original cooler installed before mounting, which went fine. The design has to be revised as it is not a decent fit for the Pi5.)
• 00:40, 23 December 2023 154.6.90.21 talk posted a new comment on X728-script (So what is the expected result on a v2.5 when shorting both "Auto ON" and "CHG EN"? I'm trying to understand the appropriate hardware configuration on a v2.5 to get it to auto start and auto charge without programming. I would agree that it would be reasonable to expect the v2.5 to be able to meet the requirement. Your answer seems to be dodging the actual question.)
• 22:46, 22 December 2023 94.31.90.222 talk posted a new comment on P394 (This thing makes no sense at all. I need a case to protect the device and I don't want to disassemble essential parts (active cooler) every time I change something. Also, the Pi does not have a reasonable hold in the case - it is only held in place by pressure. Totally useless and pointless.)
• 10:49, 22 December 2023 Walker talk contribs posted a new comment on DACPi (Hi, we haven't tested this one.)
• 10:47, 22 December 2023 Walker talk contribs posted a new comment on X728-script (x728 v2.5 just in x728 v2.3 based on the addition of Adds battery charging control via GPIO16, other features are not changed, if your X728 V2.3, can work properly, hit your expected results, it is reasonable to say that the X728 V2.5 can also meet the requirements!)
• 10:39, 22 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hi, we have received your email and have replied to you in the email)
• 08:31, 22 December 2023 151.50.14.15 talk posted a new comment on DACPi (Filter PSU board can be added?)
• 01:13, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I was able to program around the firmware issue by removing the short for the "CHG EN" and adding a function to my python script that started charging when capacity dropped below 97% and stopped charging when capacity was at 100% or greater. Just wondering why I was forced to do that when according to the documentation, I should have been able to do it from the hardware side.)
• 00:02, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I'm attempting to configure an X728 v2.5 to automatically charge the battery and start the Raspberry Pi automatically when power is restored. I have shorted both the "Auto ON" and "CHG EN" and then with the unit powered off, I remove the batteries and then replace them. The result is that everything works as expected the first time power is restored, the Pi starts automatically and the battery is charging. On subsequent attempts, there is an immediate flicker on the Pi but it doesn't actua...)
• 02:27, 21 December 2023 173.173.26.249 talk posted a new comment on PiKVM-A3 (I could use some help/advice with my PiKVM setup. I've read through the Pinned topics here and PiKVM / GeekWorm Wikis but I could be missing something so please forgive me. Hardware: - GeekWorm KVM-A3 Kit - Raspberry Pi 4B 4GB - HP Pavilion 14-v062us laptop With the laptop off, I connected my PiKVM system (HDMI and OTG USB port) to the target (my laptop) and turned the PI on. Next I turned the laptop on. I'm having two issues: 1.) H.264 / WebRTC - This option doesn't seem to work at all. I...)
• 15:07, 20 December 2023 Walker talk contribs posted a new comment on T201 (Hello, regarding this python script, if possible, you can contact our technical support at '''support@geekworm.com ''')
• 10:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (This is a working python script for soft shutdown sensing Pin 7 for power disconnect using Jetson GPIO. Power both the Jetson DC port and the T201 hat DC port with the same DC source and it will power on when power is connected. #!/usr/bin/env python3 import Jetson.GPIO as GPIO import time import os import subprocess # Use board pin numbering GPIO.setmode(GPIO.BOARD) # Pin to monitor for power loss POWER_LOSS_PIN = 7 # Set up the GPIO pin as input GPIO.setup(POWER_LOSS_PIN, GPIO.IN) def...)
• 02:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (is there developer documentation for this device? I need to know how to interface with this device when developing a soft shutdown program on power source disconnect. Pin definitions? Acceptable software and commands? Any program snippets that might help are appreciated.)
• 10:22, 19 December 2023 Walker talk contribs posted a new comment on T201 (Hi, t201 support is button control power on/off, this Jetson Nano image you mentioned comes with Ubuntu "18.04.6 LTS (Bionic Beaver)", we haven't tested it, if it's possible, you can test it and test it.)
• 07:52, 19 December 2023 69.62.198.249 talk posted a new comment on T201 (Is there a software shutdown when the power gets disconnected? I want it to also power down the T201 so it is not using up the battery when off. I am seeing software solutions for Raspberry Pi UPS versions but not this one. Jetson Nano image comes with Ubuntu "18.04.6 LTS (Bionic Beaver)". I could maybe run a python program as a systemd service?)
• 10:18, 18 December 2023 Walker talk contribs posted a new comment on XScript (Hello. Normally. NASPi Gemini 2.5 is Compatible with all Raspberry Pi operating systems, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
• 10:12, 18 December 2023 Walker talk contribs posted a new comment on X708 (Hi, when using the X708, please use a 3.7V lithium polymer battery, or a battery with sufficient discharge capacity, otherwise the X708 will automatically cut off when used at high loads.)
• 02:10, 17 December 2023 186.205.4.236 talk posted a new comment on X708 (Hello, I would like to ask a question, please: On the x728 model, if the power supply is turned off and the battery voltage drops below 3.0, the Raspberry will shut down. However, if the power supply returns and the battery voltage is higher than 2.6, the Raspberry does not auto power on. Does this behavior also occur with the x708 model? Thanks in advance!)
• 21:57, 15 December 2023 76.90.108.245 talk posted a new comment on XScript (Hey, using NASPi Gemini 2.5 dual ssd expansion, I recently decided to start back from scratch and test a different OS instead of omv. The fan script was working fine before and so was xoff. I reformatted everything, put Ubuntu server on it and created script according to instructions. Can doesn’t appear to work now anymore and running xoff it starts counting down to shutdown but it doesn’t shut it down. Also, power button on the unit doesn’t reboot or shutdown the unit either, only force shu...) Tags: Mobile web edit, Mobile edit
• 17:13, 13 December 2023 Walker talk contribs posted a new comment on X728 (Hello, X715 can be used with X728, of course, you still need to install the X715 software, the two together, will not interfere with their respective functions)
• 17:01, 13 December 2023 Walker talk contribs posted a new comment on P173 (Hi, it's about 1mm thick)
• 00:30, 13 December 2023 50.4.28.24 talk posted a new comment on X728 (When using with the X715 do you still install the X715 software? Will the latching switch input for bootup and shutdown control still work?)
• 22:12, 12 December 2023 95.238.133.97 talk posted a new comment on P173 (Hello, can you please tell me the thickness of the Thermal Pad for the CPU ? I broke it and I need to replace it... (unfortunately I bought the case on Amazon and they only gave 1 set of pads) Thank you!) Tags: Mobile web edit, Mobile edit
• 12:33, 11 December 2023 Walker talk contribs posted a new comment on X630-A3 (Ok, thanks for sharing and the advice, I think this will definitely help others!)
• 12:31, 11 December 2023 Walker talk contribs posted a new comment on X825 (Hello, the general hard disk has certain requirements on the power supply, X825 uses a 5V 4A power supply, if in the insertion of a USB3.0 hard disk, it may cause insufficient power supply situation)
• 02:39, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I finally fixed the issue like this: I plugged a regular screen on the computer i will use with kvm, and checked the sound works properly. This computer runs debian As root I used 'hw-probe -all" to extract the edid you can then find the edid here : EDID=/root/HW_PROBE/LATEST/hw.info/logs/edid then I created the hex file using edid-decode $EDID | grep '^[0-9,a-f][0-9,a-f] ' > edid_new.hex Transfer the file on the kvm, plug the screen cable on the kvm and tested it with: kvmd-edidconf...)
• 02:00, 10 December 2023 94.32.245.7 talk posted a new comment on XScript (I had the same error. I'm italian too and we use the comma as separator for decimals. The solution is to modify x-c1-fan.sh file. I have done as follow: 1) Type in terminal cd ~/xscript sudo nano x-c1-fan-sh 2) Modify function get_temp { RAW_TEMP="$(cat /sys/class/thermal/thermal_zone0/temp)" TEMP="$(awk -v temp="$RAW_TEMP" 'BEGIN { printf "%0.2f", temp / 1000; exit(0) }')" echo "$TEMP" } with this function get_temp { RAW_TEMP="$(cat /sys/cl...)
• 00:14, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Hello, finally I managed to have sound with X630-A3 V1.3 and X630 v1.3 with the extra cable, changing the client Operating Sytem. I probably need to do something on Linux Client OS to emit sound, on the pikvm screen Thank you)
• 09:07, 9 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I reinstalled from scratch, followed carefully the instructions But with X630-A3 V1.3 and X630 v1.3 and the cable between still no sound In the wiki it it said that the only change on X630 v1.5 is the DIP switch removal, but it's also something about 'Fixed HDMI back powering issue.' should I upgrade to X630-A3 V1.6 or/and X630 v1.5 ? I tried in the former install to tweak EDID, but which one would you recommend? I'm sure my MotherBoard is able to emit sound on HDMI I red that both CSI a...)
• 16:41, 8 December 2023 203.74.156.61 talk posted a new comment on X825 (Can I plug SSD in X825, then I plug another USB3.0 HDD in pi4b? Is the power enough?)
• 11:56, 8 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, if you would like to investigate using this code on the Raspberry Pi 5, you can send an e-mail to our technical support（ '''support@geekworm.com '''）, and we would be happy to start a conversation with you about the Raspberry Pi 5 product.)
• 11:48, 8 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, there should be a boost module, because this product has not been sold for a long time, and some information about the product can not be provided)
• 08:34, 8 December 2023 24.80.232.170 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hi Walker, thanks for the reply. Does the board have DC to DC boost? I don't see there is boost. If no, how come 18650 battery powered could output 5V? Thank you)
• 21:14, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The PWM signal is not at 25 kHz as it should using PWMLED)
• 21:12, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (Seems to work with this code: #!/usr/bin/python from gpiozero import PWMLED import time try: servo = 13 fan = PWMLED(servo) while(1): #get CPU temp file = open("/sys/class/thermal/thermal_zone0/temp") temp = float(file.read()) / 1000.00 temp = float('%.2f' % temp) file.close() if(temp > 35): fan.value = 0.4 if(temp > 40): fan.value = 0.5 if(temp > 50):...)
• 17:26, 7 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, because this HAT is compatible with Raspberry Pi 4B/ 3B+/3B, it hasn't been tested on Raspberry Pi 5 yet, if it is used on Raspberry Pi 5, there may be some problems, products related to Raspberry Pi 5 are being designed, please pay attention to our product updates!)
• 11:50, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The hat works well with a Raspberry Pi 5 but I can not control the fan using PWM. I currently have it running as on-off with the gpiod library. Any advice on how to use PWM on the Raspberry Pi 5? Thank you for your help)
• 10:55, 7 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, now the kvm-a3 version are support I2S, in the X630-A3 board with I2S interface, at the same time the KVM-A3 set comes with the I2S cable inside!)
• 10:53, 7 December 2023 Walker talk contribs posted a new comment on X630 (X630-A3 board with I2S interface and with I2S cable)
• 10:51, 7 December 2023 Walker talk contribs posted a new comment on X630-A3 (Hi, X630-A3 versions now support i2s,X630-A3 with I2S interface on board, capable of audio functions)
• 10:46, 7 December 2023 Walker talk contribs posted a new comment on X876 (Hi, it is x 4, but we haven't tested the Intel Optane H10 SSD.)
• 08:23, 7 December 2023 92.157.81.159 talk posted a new comment on PiKVM-A3 (Can you give an example of a working /boot/config.txt with I2S cable for X630-A3 + X630, what are the minimal required version of X630-A3 + X630 ?)
• 02:05, 7 December 2023 92.157.81.159 talk posted a new comment on X630 (Which combination of X630 X630-A3 version is able of I2S audio adding the extra I2S cable ?)
• 22:55, 6 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Which version is compatible with i2s sound ? Does sound works with X630-A3 V1.3 and X630 v1.3 ?)
• 18:46, 6 December 2023 Walker talk contribs posted a new comment on X680 (Hi, can you provide your order number? Because all the products are tested and shipped, normally there is no problem, if possible, we hope you can send a test video to us, you can contact us via our email: '''support@geekworm.com ''')
• 10:26, 6 December 2023 98.255.192.88 talk posted a new comment on X680 (Just received my X680 and INPUT1 HDMI doesn't work at all. If I move the same HDMI cable to another INPUT 2, 3 or 4, I can see video there so I know for a fact this is a hardware defect. I sent a support message just a little bit ago. Let's see how good their support is.)
• 02:27, 6 December 2023 199.73.48.162 talk posted a new comment on X876 (How many PCIe lanes are on the M.2 slot? x4? If it is x4, can it be configured to be bifurcated, x2x2 to support an Intel Optane H10 SSD (x2 to Optane, x2 to QLC)?)
• 10:59, 5 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, have you encountered any unresolved issues?)
• 10:24, 5 December 2023 Walker talk contribs posted a new comment on X650 (Thank you for your suggestion)
• 04:40, 5 December 2023 23.83.91.176 talk posted a new comment on X728-script (Still no legit firmware? Absolute garbage of a product.)
• 03:03, 5 December 2023 98.255.192.88 talk posted a new comment on X650 (I like the idea of having the GPIO 14, 15, and GND pins available so that you can connect serial UART cable to those pins and have serial console to the pikvm.)
• 14:44, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (If powered by an 18650 battery, the VIN 5V pin also outputs 5V)
• 14:36, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, can you provide your order number? Because this product has been discontinued a long time ago)
• 14:29, 4 December 2023 Walker talk contribs posted a new comment on LVDS2 (Hi, we only have 30PIN LVDS to HDMI adapter boards.)
• 01:35, 4 December 2023 80.90.95.42 talk posted a new comment on LVDS2 (Hello i have 10 pin with wire lvds but i want to convert it to hdmi i want to know if there is any conversion board fot this kind of signal) Tags: Mobile web edit, Mobile edit
• 13:43, 3 December 2023 24.80.232.170 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, when this board is powered by 18650, the VIN 5V pin cannot output 5V? The VIN 5V output only works when USB is plugged)
• 11:24, 1 December 2023 Walker talk contribs posted a new comment on XScript (Hello, you can contact us via our email: '''support@geekworm.com ''' ,Describe your problem more clearly, By the way, provide your order number, In this way, we can better solve your problem)
• 10:32, 1 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is 0.1mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
• 07:39, 1 December 2023 108.18.214.172 talk posted a new comment on XScript (i also want to add that i have to reflash my sdcard. using ubuntu 22.04.3lts)
• 07:27, 1 December 2023 108.18.214.172 talk posted a new comment on XScript (after complete this step, "Create the x-c1-pwr service". my screen just goes black. this happened about 5 times. driving me nuts.)
• 01:14, 1 December 2023 2.80.214.35 talk posted a new comment on P511 (Three questions: Thermal Conductivity of the pads and their thickness? Why isn't there an heatsink for the ethernet transceiver? Is it possible to add a 4-5mm pad to the ethernet transceiver so it contacts with the heatsink all the way to the top of the case?)
• 14:13, 30 November 2023 Walker talk contribs posted a new comment on P394 (Yes ,You're absolutely right.)
• 09:51, 30 November 2023 Walker talk contribs posted a new comment on P394 (Hello, this acrylic case is compatible with the Raspberry Pi 5 active cooler, it is possible to install it in, you can refer to the installation guide)
• 03:25, 30 November 2023 173.17.184.3 talk posted a new comment on P394 (This case CAN be used if you have already installed a PI Active cooler on your PI 5. HOWEVER, you are going to need to take the active cooler off. You'll need to use pliers to pinch the fasteners while pulling on them slightly. There is little issue with doing this. Be careful not to damage your thermal pads when removing, placing the spacer, or adding them back.)
• 16:31, 29 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hi you can refer to it: X728 , X728 V2.5 Compared to X728 V2.1, X728 V2.5 only adds a few features, but nothing else has changed.)
• 16:30, 29 November 2023 Walker talk contribs deleted comment #4146 on X728-hardware
• 16:30, 29 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hi you can refer to it: https://wiki.geekworm.com/X728''' ''' X728 V2.5 Compared to X728 V2.1, X728 V2.5 only adds a few features, but nothing else has changed.)
• 16:20, 29 November 2023 Walker talk contribs posted a new comment on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
• 16:20, 29 November 2023 Walker talk contribs deleted comment #4144 on LVDS2
• 16:20, 29 November 2023 Walker talk contribs posted a new comment on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
• 11:42, 29 November 2023 47.180.217.125 talk posted a new comment on X728-hardware (I have a couple V2.1 and a couple V2.5. Hooked up to my electronics and RPi I am pulling about 6amps out. The V2.1 powers it for an hour, but the V2.5 shuts down in a couple minutes. Do they use a different setting for "over-discharge" battery voltages or something? I can't find V2.1 boards for sale anymore, so is the discharge level "hackable" on the V2.5?)
• 17:57, 28 November 2023 159.146.47.151 talk posted a new comment on LVDS2 (hello my LM238WF2-SSK1 model screen is broken Can I plug the 30pin lvds cable coming to this screen to this board and get the image on another monitor from hdmi output)
• 10:55, 28 November 2023 Walker talk contribs posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Hello, this product has been out of stock for a long time, can you provide us with your order number?)
• 09:50, 28 November 2023 172.59.80.61 talk posted a new comment on P394 (This case can NOT be used if you're already installed a Pi Active cooler on your Pi 5.) Tags: Mobile web edit, Mobile edit
• 04:56, 28 November 2023 73.162.65.105 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Ok, I figured it out. -------------------------- Get library + example file -------------------------- Arduino IDE >> Tools >> Library Manager >> SSD1306 >> Install Arduino IDE >> File >> Examples >> Adafruit SSD1306 >> ssd1306_128x64_i2c --------------------- alter definitions: --------------------- // on this board the address is not 0xDC, it is 0x3C #define SCREEN_ADDRESS 0x3C --------------------- alter setup function: --------------------- void setup() { // // EXISTING_CODE...)
• 04:13, 28 November 2023 73.162.65.105 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (I have also come across one of these and want to get the display working. Is there a github repo showing an example of the display code that works?)
• 15:50, 27 November 2023 Harry talk contribs posted a new comment on X400 (Yes, volumio is getting closed; Please try to download the v2.8.82 from the above link. URL：https://pan.baidu.com/s/14vwZ4F_68THCNtjSKeHBAw?pwd=0rpj Extract code：0rpj (PS: The link above is only reserved for 365 days) BTW, you could try the IQaudio DAC+ or IQaudio DAC options on the VILUMIO 3, they actually use the same decoder chip as the X400! Regards)
• 15:41, 27 November 2023 Harry talk contribs posted a new comment on X735 Software (Hello, this script is updated to X735-script)
• 15:41, 27 November 2023 Harry talk contribs posted a new comment on X735 Software (Hello, this script is updated to X735-script)
• 15:22, 27 November 2023 Walker talk contribs posted a new comment on XScript (Hi, we haven't tested it on home assistant, there's no way to help you with that.)
• 22:20, 26 November 2023 84.146.151.175 talk posted a new comment on X735 Software (And for the future better run the scripts and any software for your hardware after a delay maybe 1 or 2 minutes, because then you have a chance to uninstall the script when the system is not running after installation of your software)
• 22:17, 26 November 2023 84.146.151.175 talk posted a new comment on X735 Software (After Installation of the Script on Raspbian, the linux system will not start correctly. When the script want to start the cooler, the RaspberryPi shut down. I checked the power and I dont find a problem. You cant login to the system top uninstall the script, so I have to start from the scratch. I don't use the script now, the cooler ist not running now. Please check your scripts ans provide a running system)
• 19:26, 26 November 2023 176.33.68.229 talk posted a new comment on X400 (Hello, volumio is not running new versions. Is there a link to get volumio os 2.44 from you. Volumio is not as helpful as it used to be. Now it supports the companies it cooperates with. So we're stuck with the x400. I need your help.)
• 19:26, 26 November 2023 176.33.68.229 talk posted a new comment on X400 (Merhaba, volumio yeni versiyonları çalıştırmıyor. Volumio os 2.44 sizden temin edebileceğimiz link var mı. Volumio eskisi gibi yardımcı değil. Artık işbirliği yaptığı firmaları desteklemektedir. O yüzden x400 ile ortada kaldık. Yardımınız gerek...)
• 09:01, 26 November 2023 24.46.14.199 talk posted a new comment on XScript (How do I configure it with home assistant?) Tags: Mobile web edit, Mobile edit
• 17:40, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, this X729 is for raspberry pi, we have not tested it on orange pi)
• 17:39, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, this X729 is for raspberry pi, we have not tested it on orange pi)
• 17:38, 24 November 2023 Walker talk contribs deleted comment #4126 on X729
• 17:38, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, similar products related to Raspberry Pi 5 are currently being designed. Please follow our WIKI and our products will be updated in the future)
• 17:31, 24 November 2023 194.184.204.206 talk posted a new comment on NASPi (Hi, do you have any information about compatibility (I mean the necessary scripts) with OS Moode audio? Thanks)
• 07:15, 24 November 2023 45.233.117.70 talk posted a new comment on X729 (Hi, is it compatible with orange pi 5b PLUS?)
• 07:04, 24 November 2023 45.233.117.70 talk posted a new comment on X729 (Hi, is it compatible with orange pi 5b?)
• 18:52, 22 November 2023 Harry talk contribs posted a new comment on How to enable I2C (Hello. This is not normal. UU indicates that the device is used in the driver. Wondering if you used other external I2C devices? Can you also upload a physical connection diagram to us? Or contact us at support@geekworm.com)
• 18:52, 22 November 2023 Harry talk contribs deleted comment #4121 on How to enable I2C
• 18:51, 22 November 2023 103.192.227.82 talk posted a new comment on How to enable I2C (Hello. This is not normal. UU indicates that the device is used in the driver. Wondering if you used other external I2C devices? Can you also upload a physical connection diagram to us?)
• 07:10, 22 November 2023 68.226.119.5 talk posted a new comment on How to enable I2C (on my setup, when i run sudo i2cdetect -y 1 at address 68 it shows "UU" which I assume means unavailable. Is that normal for X728 v2.5?)
• 18:02, 17 November 2023 Walker talk contribs posted a new comment on WEMOS ESP8266 D1 R2 V2.1 (Hello, we are no longer selling this product, but we would like to remind you that 9-24V power input. Please pay attention to the voltage setting, otherwise the board may burn out)
• 13:08, 17 November 2023 169.0.249.12 talk posted a new comment on WEMOS ESP8266 D1 R2 V2.1 (The SDA616 voltage regulator is rated at 3.3V to 16V input - if you've given it 24V then it's toast...)
• 12:16, 15 November 2023 Walker talk contribs posted a new comment on AMPi (Sorry for the unclear description. We have made modifications to the image. Please refer to the following figure for the speaker connection settings 500px|none|AMPi)
• 12:15, 15 November 2023 Walker talk contribs deleted comment #4116 on AMPi
• 12:15, 15 November 2023 Walker talk contribs posted a new comment on AMPi (Sorry for the unclear description. We have made modifications to the image. Please refer to the following figure for the speaker connection settings 700px|none|AMPi)
• 11:14, 13 November 2023 Walker talk contribs posted a new comment on AMPi (Hello, we are sorry that there is currently no installation video for this AMPi. Have you seen the installation guide image? Are there any areas where we cannot describe clearly? We will continue to improve)
• 10:40, 13 November 2023 Walker talk contribs posted a new comment on X735 (Hello, could you please provide your order number? you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
• 17:09, 12 November 2023 37.66.215.229 talk posted a new comment on X882 (Hello, just to keep you updated: I was able to find another product to plug my SSDs in RAID. It works fine. The disks are really close together, but the box have its own power supply. So I guess my problem was power supply and not FEM.)
• 11:27, 12 November 2023 68.2.181.4 talk posted a new comment on AMPi (These are the most difficult to figure out and least intuitive instructions I have seen. First there are more parts then you need so you can get confused as to which part goes where. Second, there are not enough pictures to show the screw and spacer locations on the bottom of the board. Third, how about an installation video. I had to go to Amazon and watch a video about another board and case installation to try and figure some things out. I was expecting some pictures of the bottom and...)
• 18:23, 10 November 2023 Walker talk contribs posted a new comment on X630-A3 (Hello, this fan is 2PIN and cannot control the fan speed)
• 08:13, 10 November 2023 174.214.50.102 talk posted a new comment on X735 (hello. i have the x735 v2.1 installed on a rpi 3b. I installed the appropriate x730 script from the github repo as per instructions for the v2.1 hat. everything works great for a few shutdowns/reboots but, and i have tried this five times now, after a few reboots the root fs becomes locked and im greeted with a notification that the fs is corrupt and has been locked by root and system becomes unbootable. currently im using it with out the script just fir the cooling fan but it would be great...) Tags: Mobile web edit, Mobile edit
• 04:15, 10 November 2023 85.216.54.101 talk posted a new comment on X630-A3 (Is it possible to control the fan and/or switch it off?)
• 12:16, 8 November 2023 Walker talk contribs deleted comment #3644 on LVDS Adapter
• 12:16, 8 November 2023 Walker talk contribs posted a new comment on LVDS Adapter (LVDS board working with 6bit single, the picture will become abnormal, and the screen will be blurred)
• 10:05, 7 November 2023 Walker talk contribs posted a new comment on X715 (Hello, these two cannot be used together,)
• 07:12, 7 November 2023 73.22.109.101 talk posted a new comment on X715 (Can I combine this with x708UPS hat? Are there any special precautions I would need to make?)
• 12:21, 6 November 2023 Walker talk contribs posted a new comment on GDC (Thank you for your interest in our products)
• 22:25, 4 November 2023 94.31.80.42 talk posted a new comment on GDC (Auf W541 von LENOVO mit E-MU1820 und mit GFORCE GTX1060Ti (ASUS Version) erfolgreich getestet :-))
• 17:08, 2 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hello, you can refer here:[https://wiki.geekworm.com/X728-script#How_to_Use_GPIO16_to_control_battery_charging''' ''' How_to_Use_GPIO16_to_control_battery])
• 17:08, 2 November 2023 Walker talk contribs deleted comment #4102 on X728-hardware
• 17:08, 2 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hello, you can refer here: [https://wiki.geekworm.com/X728-script#How_to_Use_GPIO16_to_control_battery_charging''' ''' How_to_Use_GPIO16_to_control_battery])
• 14:06, 2 November 2023 68.51.90.40 talk posted a new comment on X728-hardware (I see that there is now a V2.5 on here with a GPIO to control battery charging. Does this mean you can control whether the batteries are enabled via software now? If so, that brings a whole new realm of possibilities with combining other power supply hats and using one of these as a dedicated fallback, if I'm understanding correctly.)
• 10:25, 1 November 2023 Walker talk contribs posted a new comment on Raspberry pi 4 can't find 5ghz wifi (Thanks)
• 10:23, 1 November 2023 Walker talk contribs posted a new comment on X708 (Hello, whether the X708 can be used on the Raspberry Pi 5, we have not tested it, and we are currently accelerating the design of Raspberry Pi 5 related products, which are expected to be on the shelves of our store soon, please pay attention to our product updates)
• 05:21, 1 November 2023 151.34.233.251 talk posted a new comment on Raspberry pi 4 can't find 5ghz wifi (worked! changing to china worked for me for channel 149 sent from my xiaomi/redmi phone hotspot! :D)
• 11:55, 31 October 2023 86.174.101.57 talk posted a new comment on X708 (can I use this on the new RPI5? Volts and Amps wise, it seems to be able to support it. can anyone confirm this?)
• 17:54, 30 October 2023 Walker talk contribs posted a new comment on C779-Software (Hello, you can refer to the official information https://forums.raspberrypi.com//viewtopic.php?f=38&t=281972''' ''')
• 14:56, 30 October 2023 73.185.60.160 talk posted a new comment on C779-Software (the code to save video on gstreamer is no longer functional, it saves as a 0byte file.)
• 10:41, 30 October 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, now only the KVM-A3 comes with that length of USB Cable and Ethernet Cables.You can buy a longer cable yourself, but please note that ATX Conrol cable， It must be 568B line sequence, 700px|none|ATX Conrol cable)
• 10:20, 30 October 2023 82.2.61.221 talk posted a new comment on X708-Software (Hello, is there any way to setup the x708off to be operable using a webserver specifically a php lightttpd server (raspap) I want to integrate it with raspap so I can turn my pi off using the webservice of raspap and not need to ssh to give the x708off command)
• 03:34, 30 October 2023 130.180.66.238 talk posted a new comment on PiKVM-A3 (Do you have longer USB Cable (USB without Power for KVM) and longer Ethernet Cables (for ATX power control) in your Shop?)
• 10:29, 24 October 2023 Walker talk contribs posted a new comment on NESPi Pro (Sorry, not at the moment)
• 18:46, 23 October 2023 108.185.70.237 talk posted a new comment on NESPi Pro (Does anybody know of a script to use so I can power up the case using the power button?) Tags: Mobile web edit, Mobile edit
• 09:51, 23 October 2023 Walker talk contribs posted a new comment on How to Configure RAID Setting (Hello, can you provide your order number, then you can contact us via our email: '''support@geekworm.com ' we will do our best to solve your problem)
• 21:26, 20 October 2023 76.90.108.245 talk posted a new comment on How to Configure RAID Setting (Every time I try and set the raid0 for my drives and then check with Lsusb, It’ll be fine. Then check with Lsblk and it’ll only show /dev/sda but it won’t have /dev/sda1. And if I try and use fdisk I keep getting input/output error.) Tags: Mobile web edit, Mobile edit
• 18:59, 20 October 2023 Walker talk contribs posted a new comment on NESPi Pro (Hello, this is not necessary, if you do not install an RTC battery, it can also be used, but the RTC module cannot be used)
• 14:35, 20 October 2023 108.185.70.237 talk posted a new comment on NESPi Pro (Is the battery necessary?) Tags: Mobile web edit, Mobile edit
• 14:29, 19 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, 1. First you need to determine if there is a problem with the script installation of the fan </pre> 2. If the script is ok, could you describe it in more detail about the problem </pre> 3. you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（You will need to provide your order number）)
• 14:28, 19 October 2023 Walker talk contribs deleted comment #4084 on NASPi Gemini 2.5
• 14:28, 19 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, 1. First you need to determine if there is a problem with the script installation of the fan 2. If the script is ok, could you describe it in more detail about the problem 3. you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（You will need to provide your order number）)
• 10:21, 19 October 2023 186.79.209.158 talk posted a new comment on NASPi Gemini 2.5 (Hi, i just turn on the genemi like in the tutorial, but the fan start spinning, but the stop like a second later. any help?)
• 16:12, 17 October 2023 Walker talk contribs posted a new comment on NASPi CM4-M2 (Hello. This content is the design details of the product, we have no way of knowing)
• 04:30, 17 October 2023 82.68.20.62 talk posted a new comment on NASPi CM4-M2 (Is there any documentation available for the GPIOs used by this board. Specifically, I would like to know the functions of the GPIOs related to power management. As far as I can tell, it's something along these lines: GPIO17 [OUT, active high] - Set to indicated OS boot complete? GPIO27 [OUT, active high] - Request power off. GPIO4 [IN, active high] - Shutdown requested. It seems like GPIO17 needs to be set for GPIO4 to have any function. GPIO27 seems to have different behaviour depending o...)
• 10:29, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (When sending the email, please provide your order number by the way)
• 10:28, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, you can contact us via our email: '''support@geekworm.com ''' You can describe your problem as clearly as possible, and then we will help you as much as possible, (but because of the compatibility of this LVDS board, sometimes we have no way to judge))
• 10:28, 16 October 2023 Walker talk contribs deleted comment #4078 on LVDS Adapter
• 10:28, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, you can contact us via our email: '''support@geekworm.com ''' You can describe your problem as clearly as possible, and then we will help you as much as possible, (but because of the compatibility of this LVDS board, sometimes we have no way to judge))
• 10:23, 16 October 2023 Walker talk contribs posted a new comment on C296 (Hello, thermal paste is only used between the copper sheet and the heatsink, relatively speaking, the heat dissipation effect of using copper sheet is better than the use of thermal money)

(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)