From Geekworm Wiki
Jump to navigation Jump to search



This is a acrylic case for Raspberry Pi 5 8GB / 4GB. It also compatible with Raspberry Pi 5 active cooler to provide good heat dissipation.If you don't want to use the Raspberry Pi 5 official Active Cooler, you can also install 3010 or 4010 fan on the top layer.

9-Layers acrylic structure holds your Pi board firmly in place, and don't worry about WLAN. This Raspberry Pi 5 case is made of acrylic, which provides a clear glossy finish and easy to check the working status of Raspberry Pi.



  • Model: P394
  • Material: Acrylic
  • Easy access to all ports of Raspberry Pi 5
  • Compatible with Raspberry Pi 5 Official active cooler
  • Size: 92*67*25mm / 3.62 * 2.64 * 0.98
  • Weight: 68g

Packing List

  • 1 x Acrylic case,
  • 4 x screws,
  • 4 x nuts,

Note: NOT include Raspberry Pi 5 motherboard or Raspberry Pi active cooler.

User Manual


Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Anonymous user #2

8 days ago
Score 0++
This case CAN be used if you have already installed a PI Active cooler on your PI 5. HOWEVER, you are going to need to take the active cooler off. You'll need to use pliers to pinch the fasteners while pulling on them slightly. There is little issue with doing this. Be careful not to damage your thermal pads when removing, placing the spacer, or adding them back.


8 days ago
Score 0++
Yes ,You're absolutely right.

Anonymous user #1

10 days ago
Score 0++
This case can NOT be used if you're already installed a Pi Active cooler on your Pi 5.


8 days ago
Score 0++
Hello, this acrylic case is compatible with the Raspberry Pi 5 active cooler, it is possible to install it in, you can refer to the installation guide