GEEKWORM NAS Family

From Geekworm Wiki
Jump to navigation Jump to search

Raspberry pi 5 NAS Storage

Raspberry pi 5 NVMe

Geekworm PCIe to NVME Sets:

After the release of the Raspberry Pi AI Kit, we tested four PIPs: X1001, X1004, X1011, and M901. X1001, X1004, and M901 all support the hailo-8 ai ​​accelerator, but X1011 does not.

It should be noted that X1004 uses ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.

Our tentative conclusions are as follows:

  • If you need to use hailo-8 ai accelerator with high performance, it is recommended to use X1015/X1002/X1003/M901/ the official M.2 HAT+ etc. When choosing these PIP boards, you should focus on whether there is a conflict between the camera cable and the PIP board installation, and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
  • If you don't care about the high performance brought by PCIe 3.0, then you can consider using X1004, so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
Model Compatible with Position NVMe M2 SSD Length Support Matching Case Matching Cooler Support NVMe Boot Support PCIe 3.0 Support Hailo-8 AI Accelerator
X1000 Raspberry Pi 5 Top 2230/2242 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Not tested
X1001 Raspberry Pi 5 Top 2230/2242/2260/2280 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Yes
X1002 Raspberry Pi 5 Bottom 2230/2242/2260/2280 P580 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Not tested
X1003 Raspberry Pi 5 Top 2230/2242 P579 / P425 Official Cooler / H501 Only Yes - Not tested
X1004 Raspberry Pi 5 Top Dual ssd: 2280 P579-V2 Official Cooler / Argon THRML Cooler / H505/H501 Yes (Requires EEPROM 2024/05/17 version and above) NO Yes
X1015 Raspberry Pi 5 Top 2230/2242/2260/2280 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Yes
X1005 Raspberry Pi 5 Bottom Dual ssd: 2230/2242/2260/2280 No matching case yet Official Cooler / Argon THRML Cooler / H505/H501 Yes (Requires EEPROM 2024/05/17 version and above) NO Yes
X1011 Raspberry Pi 5 Bottom 4 ssds: 2230/2242/2260/2280 X1011-C1 Official Cooler / Argon THRML Cooler / H505/H501 Yes (eeprom 2024/05/17 and later VER) NO NO
M901 Raspberry Pi 5 Top 2230/2242/2260/2280 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Yes
Q100 Raspberry Pi 5 Top 2242 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Not tested
Q200 Raspberry Pi 5 Top Dual ssd: 2280 P579 Official Cooler / Argon THRML Cooler / H505/H501 NO - Not tested
M300 Raspberry Pi 5 Top 2230/2242 P579 Official Cooler / Argon THRML Cooler / H505/H501 Yes - Not tested
M400 Raspberry Pi 5 Top 2230/2242/2280 P579 Official Cooler/ Argon THRML Cooler / H505/H501 Yes - Not tested

Raspberry pi 5 SATA

Raspberry pi 5 SATA Series

Model Matching Case Matching Cooler Supported SSD lengths Mounting Position Support NVMe Boot
X1100 X1100-C1 Official Cooler / Official Cooler / Argon THRML Cooler / H505 / H501 2.5" SATA HDD / SSD Bottom Yes
X1006 NO Case yet Official Cooler / Official Cooler / Argon THRML Cooler / H505 / H501 2.5" SATA HDD + M.2 SATA Key-B 2280 SSD Bottom NO
X1007 NO Case yet Official Cooler / Official Cooler / Argon THRML Cooler / H505 / H501 Dual SATA 2.5" HDD / SSD Bottom NO
X1008 NO Case yet Official Cooler / Official Cooler / Argon THRML Cooler / H505 / H501 2.5" SATA HDD / SSD + 3.5" SATA HDD Shield Bottom NO
X1009 NO Case yet Official Cooler /Official Cooler / Argon THRML Cooler / H505 / H501 5PCS 2.5" SATA HDD / SSD /3.5" SATA HDD Top NO

NASPi Storage series

Please enter the following correspond user manual and installation video page according to the NASPi product you purchased.
Model Compatible with Supported HDD Installation Video
NASPi Raspberry Pi 4B 2.5 inch HDD/SSD (1pcs) Please refer to NASPi Installation Video
NASPi Lite Raspberry Pi 4B 2.5 inch HDD/SSD (1pcs) Please refer to NASPi Lite Installation Video
NASPi Gemini 2.5 Raspberry Pi 4B 2.5 inch HDD/SSD (2pcs) Please refer to NASPi Gemini 2.5 Installation Video
NASPi Gemini 3.5 Raspberry Pi 4B 3.5 inch HDD/SSD (2pcs) Please refer to NASPi Gemini 3.5 Installation Video
NASPi CM4-M2 Raspberry Pi CM4 M.2 SATA & M.2 NVMe(2pcs) Please refer to NASPi CM4-M2 Installation Video
NASPi CM4-2.5 Raspberry Pi CM4 2.5" SATA3/SATA2/SATA (1pcs) Please refer to NASPi CM4-2.5 Installation Video

Raspberry pi 4 NAS Storage

for 2.5" sata

Product Name NASPi NASPi Lite NASPi Gemini 2.5 V2.0 X825 V2.0 X825 V1.5 X825v X880 X883 X828(Stackable) X829(Dual SATA)
Compatible with raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4/ 3B+/ 3B/ 2B/ B+ raspberry pi 4
Socket 2.5" sata HDD/SSD 2.5" sata HDD/SSD 2.5" sata HDD/SSD 2.5" sata HDD/SSD 2.5" sata HDD/SSD 2.5" sata HDD/SSD 2.5" /3.5" sata HDD/SSD 2.5" sata HDD/SSD one or multiple 2.5" sata HDD/SSD by stack the X828 Dual 2.5" sata HDD/SSD
Number of SSD/HDD Supported 1 pcs 1 pcs 1 or 2 pcs 1 pcs 1 pcs 1 pcs 1 or 2 pcs 1 or 2 pcs 1+ pcs 2 pcs
Power Requirement USB C 5Vdc +/-5% , ≥4A

USB C 5Vdc +/-5% , ≥4A

DC 6-18V +/-5% , ≥4A

  • DC 5V/≥4A -5.5x2.1mm jack
  • USB C 5Vdc +/-5% , ≥4A
  • DC 5V/≥4A - 5.5x2.1mm jack
  • USB C 5Vdc +/-5% , ≥4A

USB C 5Vdc +/-5% , ≥4A

12Vdc +/-5% , ≥3A - 5.5x2.1mm jack

DC 5V/≥4A - 5.5x2.1mm jack

  • DC 5V/≥4A - 5.5x2.5mm jack
  • 1pc power supply for every 3pcs X828

DC 5V/≥4A - 5.5x2.5mm jack

Matching Case
  • Already with a NUC stylc case
  • with a 4010 PWM fan
  • Already with a NUC style case
  • with a 4010 ordinary fan
  • Already with a case
  • with a 4010 PWM fan
  • Model: X825-C8
  • With a power switch button
  • with a 4010 ordinary fan
  • For Pi 4 + X825 V2.0 + X735
  • Model: X825-C6
  • With a power switch button
  • with a 4010 ordinary fan
  • For Pi 4 + X825 V1.5 + X735
  • Model: X825-C8
  • With a power switch button
  • with a 4010 ordinary fan
  • For Pi 4 + X825v + X735
  • Model: X880-C1
  • with a 4010 ordinary fan

No matching case

  • Model: [X828-C1]
  • With a power switch button
  • with a 4010 ordinary fan
  • Model: X829-C1
  • With a power switch button
  • with a 6010 ordinary fan
Extra Cooling Solution Recommended / / / X735 X735 X735 Horizontal ICE Tower Fan X735/X708 X735 X735/X708
Installation Video

Click to play

Click to play

Click to play

Click to play

Click to play

Click to play

/

Click to play

Differences
  • NASPi & NASPi Lite are both NUC-style aluminum case, supporting 1 SSD/HDD; NASPi Gemini is a metal case, supporting 1 or 2pcs SSDs/HDDs working at the same time, NASPi Gemini support RAID
  • NASPi & NASPi Gemini support 2 micro HDMI sockets; NASPi Lite support 1 full size HDMI socket;
  • NASPi and NASPi Gemini support Safe Shutdown, PWM Fan; NASPi Lite does not support Sfe Shutdown and PWM Fan
  • Functions of X825 V2.0 & X825 V1.5 & X825v are the same
  • X825 V2.0 is updated from X825 V1.5,add 4 test pins to achieve which implified power supply and installation
  • X825v powered via raspberry pi or X735, not from the on-board DC socket of X825v; X825 V1.5 & X825 V2.0 powered via raspberry pi or X735 or on-board DC socket
  • Both X880 & X883 support 1 or 2pcs SSD/HDD working at the same time
  • X880 supports 2.5 inch and 3.5 inch;X883 only supports 2.5 inch
  • X880 require 12V PSU, while X883 require 5V PSU
  • X883 is more compact than X880, SSD/HDD can be directly inserted on both sides of the X883 board, while the X880 needs two other boards to carry the SSD/HDD.

off-production

for 3.5" sata

Product Name X832 V1.0 X832 V1.2 X880 NASPi Gemini 3.5 X885 X835 (stackable)
Compatible with raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4/ 3B+/ 3B/ 2B/ B+
Socket 3.5" sata HDD 3.5" sata HDD 2.5" /3.5" sata HDD/SSD Dual 3.5" sata HDD Dual 3.5" sata HDD one or multiple 3.5" HDD by stack the X835
Number of SSD/HDD Supported 1 pcs 1 pcs 2 pcs 2 pcs 2 pcs 1+ pcs
Power Requirement
  • 12Vdc +/-5% , ≥3A - 5.5x2.1mm jack
  • Power via X832 DC 12V In socket
  • 12Vdc +/-5% , ≥3A - 5.5x2.1mm jack
  • Power via X832 DC 12V In socket

12Vdc +/-5% , ≥3A - 5.5x2.1mm jack

12Vdc +/-5% , ≥3A - 5.5x2.1mm jack

12Vdc +/-5% , ≥5A - 5.5x2.1mm jack

  • 12Vdc +/-5% , ≥3A - 5.5x2.5mm jack
  • Power via X835 DC 12V In socket
Matching Case
  • Model: X835-C1
  • With a power switch button
  • with a 4010 ordinary fan
  • For Pi 4 + X832 V1.0 + X735
  • Model: X832-C1
  • With a power switch button
  • with a 4010 ordinary fan
  • For Pi 4 + X832 V1.2 + X735
  • Model: X880-C1
  • with a 4010 ordinary fan
  • Already with a case
  • with a 4010 PWM fan

Refer to NASPi Gemini 3.5 for the kit of X885 with Case and PWM Fan

  • Model: X835-C1
  • With a power switch button
  • with a 4010 ordinary fan
  • This case is only compatible with 1pc X835, not compatible with 2 or more X835
Extra Cooling Solution Recommended X735 X735 Horizontal ICE Tower Fan / / X735
Installation Video / Click to play Click to play https://youtu.be/iifa9cTGqFM / Click to play
Differences
  • X832 V1.0 and X832 V2.0 only support one HDD.
  • X880 / X885 / NASPi Gemini 3.5 supports 1 or 2 HDDs to be used at the same time;
  • X835 supports stacking to use one or multiple HDDs at the same time;
  • X832 V2.0 updated from V1.0, adding 4 test pins, which simplifies power supply and installation, and the DC jack is also changed from 5525 to 5521
  • X885 is the single board, NASPi Gemini 3.5 is composed of X885 single board + Case + 4010 3Pin PWM fan;
  • X835 compatible with raspberry pi 4/ 3B+/ 3B/ 2B/ B+, X832 V1.0 / X832 V1.2 / X880/X885/NASPi Gemini 3.5 only compatible with raspberry pi 4

for mSATA, NVMe, M.2 Key-B NGFF

Product Name X857 V2.0 X862 V2.0 X863 X876
Compatible with raspberry pi 4 raspberry pi 4 raspberry pi 4 raspberry pi 4
Socket mSATA SSD M.2 Key-B NGFF SSD 2280 M.2 Key-B NGFF SSD 2280 M.2 Key-M NVMe 2280
Number of SSD/HDD Supported 1 pcs 1 pcs 1 pcs 1 pcs
Power Requirement USB C 5Vdc +/-5% , ≥4A USB C 5Vdc +/-5% , ≥4A USB C 5Vdc +/-5% , ≥4A USB C 5Vdc +/-5% , ≥4A
Matching Case
  • Model: X857-C3
  • With 4010 cooling fan
  • With a power switch button(must connect to X735 / X708)
  • Model: X857-C3
  • With 4010 cooling fan
  • With a power switch button(must connect to X735 / X708)
Extra Cooling Solution Recommended X735/X708 X735/X708 X732 X732
Installation Video Click to play Click to play Click to play Click to play

Raspberry pi 3 NAS Storage

Raspberry pi 3 NAS Storage Family
Item 2.5" SATA SSD/HDD 3.5" SATA HDD mSATA SSD NVMe M.2 SSD NGFF M.2 SSD
Product Name X820 X821 X822(Dual SATA) X830 X850 X852(Dual mSATA) X870 X860 X851
Compatible with raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board raspberry pi 3B+/ 3B raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board raspberry pi 3B+/ 3B/ 2B/ B+ raspberry pi 3B+/ 3B/ 2B/ B+ raspberry pi 3B+/ 3B/ 2B/ B+ raspberry pi 3B+/ 3B/ 2B/ B+ raspberry pi 3B+/ 3B
Interface/Socket 2.5" sata HDD/SSD 2.5" sata HDD/SSD Dual 2.5" sata HDD/SSD 3.5" sata HDD mSATA SSD Dual mSATA SSD M.2 NVMe SSD 2280, 2260, 2242, 2230 M.2 NGFF 2280/2260/2242/2230 M.2 NGFF 2280
Power Requirement DC 5V/≥4A - 5.5x2.1mm jack USB C 5Vdc +/-5% , ≥4A DC 5V/≥4A - 5.5x2.5mm jack DC 12V/≥3A - 5.5x2.5mm jack Powered via Pi's USB port DC 5V/≥4A - 5.5x2.5mm jack Powered via Pi's USB port Powered via Pi's USB port Powered via Pi's USB port
Matching Case
  • Model: X820 Case
  • For X820 + X735+pi 3B+/ 3B/ 2B/ B+/ ROCK64
  • With Power Switch
  • With Cooling Fan
No Matching Case
  • Model: X830 Case
  • For X830 + pi 3B+/ 3B/ 2B/ B+/ ROCK64
  • With Power Switch
  • With Cooling Fan
- No Matching Case - - -
PCB Size 10.7 x 8.5 cm 10.7 x 8.5 cm 16.5 x 10.8 cm 15.5x11.8 cm 8.5 x 5.6 cm 9.9 x 8.6 cm 8.5 x 5.6 cm 8.5 x 5.6 cm 82x87mm/3.22x3.42inch
Installation Video Click to play - - - - - - - -

Nvidia Jetson Nano Storage

Nvidia Jetson Nano Storage Family
Item 2.5" SATA SSD/HDD mSATA SSD NVMe M.2 SSD M.2 NGFF SSD
Product Name T300 T130 T100 T150
Compatible with Nvidia Jetson Nano A02/ B01 Nvidia Jetson Nano A02/ B01 Nvidia Jetson Nano A02/ B01 Nvidia Jetson Nano A02/ B01
Interface/Socket 2.5" sata HDD/SSD mSATA SSD M.2 NVMe SSD 2280, 2260, 2242, 2230 M.2 NVMe SSD 2280, 2260, 2242, 2230 (Only only 2280 holes are already threaded.)
Power Requirement DC 5V/≥4A - 5.5x2.1mm jack DC 5V/≥4A - 5.5x2.5mm jack DC 5V/≥4A - 5.5x2.5mm jack Powered via Jetson Nano
Matching Case
  • Model: T300 Case
  • For T300 + Jetson Nano A02/ B01
  • With Power Switch
  • With Reset Switch
  • Support Cooling Fan Installation(Not supplied)
-
  • Model: T100 Case
  • For T100 + Jetson Nano A02/ B01
  • With Power Switch
  • With Reset Switch
  • Support Cooling Fan Installation(Not supplied)

No matching case

PCB Size 12.3 x 7.9 cm 8.5 x 5.6 cm 10 x 8 cm 10 x 8 cm
Installation Video - - Click to play -
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.