X822

Overview

The new member of the Raspberry Pi storage expansion board family - X822 (Dual 2.5" SATA HDD/SSD Shield ) is coming.

Ideal storage solution for Raspberry Pi - Dual 2.5" SATA HDD/SSD Shield
Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
Supports 2 HDD or 2 SSD or HDD+SSD working at the same time
Supports operating system installation and booting from your HDD/SSD
Provides additional 2 USB ports for Raspberry Pi
Powers the Raspberry Pi via on-board XH2.54 connector - Only one power adapter required
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
Integrated USB 3.1 Gen 1 Hub Controller
USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
Specially-made USB3.0 jumper to connect with Raspberry Pi - no additional cables needed
LED blue indicator indicates drive status
Fully compatible with X735 for intelligent and safe power management
PCB Size: 165mm x 108mm

[NOTE]

USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
2.5" SATA HDD/SSD not included
As with all SSDs, new media must be formatted before use
Performance depends on host system, workload, and SSD media used
SSDs use exceptionally high performance storage media that will run hot when under load
Older SSD drives with less efficient flash media may not perform as well as newer drives

Power supply: 5.1Vdc +/-5% , 4A (Require high quality power supply!!!)

No matching case now