This is a Geekworm deisgn metal case with latching power control switch and super mute 4010 cooling fan for Raspberry Pi 4 , X835/X832 and X735, it is a perfect choice for raspberry pi nas storage DIY user.
- 1. The power control switch in X835 metal case is latching switch.
- 2. The Raspberry Pi 4 Model B, X835 3.5" SATA board, 3.5" SATA HDD, X735 power management board are all not included in the packing list.
- 3. X835 metal case only support install 1 piece X835 expansion board with X735 board, please note X835 metal case is not support X830.
- Power switch with beautiful LED indicator to control the power of X835 and the Raspberry pi 4 Model B
- Support super mute cooling fan provides good heat dissipation;
- Reserved Side Slot(Interface) for GPIO/FFC Cable
- Reserved Slot for X735 DC power Port, microusb port and Type-C Power Port
- When use with X735 board, the power supply should be connected to X835 DC 12V IN port NOT X735.
- The PWR ON jumper must be removed (not short) when use with X735 power management board.
- VESA mount: 100mm
- Case Size(Installation): 17X10.5X8 (cm) / 6.69 x 4.13 x 3.15 (inch);
- High quality metal material with surface galvanized process;
- Equipped with 4010 big cooling fan in X828 case; But if use with X735 board, there is no need to use the cooling fan inside X835 case.
Installation video for Raspberry Pi 4 + X835/X832 + X735: https://youtu.be/8jdNf4sYQkQ Video:
- 1x X835 metal case
- 1x power control switch
- 1x cooling fan
- 1x Installation screws pack
The X835-C1 case has been discontinued, we open source the 3D drawings file(.std format) File:X835-C1.zip
Installation video for Raspberry Pi 4 + X835/X832 + X735 V2.1: https://youtu.be/8jdNf4sYQkQ