Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 16:07, 28 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is 0.9 mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
  • 17:10, 27 December 2023 93.41.237.150 talk posted a new comment on XScript (I have the same problem: RaspberryOS 64bit on Raspi4B 4Gb, wrote a mail to support. The last step is somehow wrong: it shuts down the Raspberry immedately and is then stuck in a boot loop.)
  • 10:15, 26 December 2023 Walker talk contribs posted a new comment on X728 (Hi, currently, the Raspberry Pi 5 related products are under design, please wait for the update of our next products (we haven't tested X728 on Raspberry Pi 5))
  • 19:28, 25 December 2023 5.203.156.160 talk posted a new comment on X728 (Hello, can i use x728 with Pi 5?) Tags: Mobile web edit, Mobile edit
  • 11:19, 25 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at ： '''support@geekworm.com ''')
  • 11:18, 25 December 2023 Walker talk contribs deleted comment #4214 on X728-script
  • 11:18, 25 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, my answer may not be so professional, please understand, if possible, I hope you contact our technical support at :'''support@geekworm.com '''')
  • 11:14, 25 December 2023 Walker talk contribs posted a new comment on P394 (Hi, we have now changed the design and added a key button)
  • 11:13, 25 December 2023 Walker talk contribs posted a new comment on P394 (Hi, the design principle of this acrylic case is like this, using 9 layers of acrylic stacked on top of each other, if you don't like this kind of design, you can consider our Pi 5 metal case: [https://www.aliexpress.us/item/3256806091879071.html?gatewayAdapt=glo2usa4itemAdapt''' ''' P573])
  • 20:15, 23 December 2023 94.110.204.43 talk posted a new comment on P394 (It all feels compressed when mounted. The power buttonhole was not present. Had the original cooler installed before mounting, which went fine. The design has to be revised as it is not a decent fit for the Pi5.)
  • 00:40, 23 December 2023 154.6.90.21 talk posted a new comment on X728-script (So what is the expected result on a v2.5 when shorting both "Auto ON" and "CHG EN"? I'm trying to understand the appropriate hardware configuration on a v2.5 to get it to auto start and auto charge without programming. I would agree that it would be reasonable to expect the v2.5 to be able to meet the requirement. Your answer seems to be dodging the actual question.)
  • 22:46, 22 December 2023 94.31.90.222 talk posted a new comment on P394 (This thing makes no sense at all. I need a case to protect the device and I don't want to disassemble essential parts (active cooler) every time I change something. Also, the Pi does not have a reasonable hold in the case - it is only held in place by pressure. Totally useless and pointless.)
  • 10:49, 22 December 2023 Walker talk contribs posted a new comment on DACPi (Hi, we haven't tested this one.)
  • 10:47, 22 December 2023 Walker talk contribs posted a new comment on X728-script (x728 v2.5 just in x728 v2.3 based on the addition of Adds battery charging control via GPIO16, other features are not changed, if your X728 V2.3, can work properly, hit your expected results, it is reasonable to say that the X728 V2.5 can also meet the requirements!)
  • 10:39, 22 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hi, we have received your email and have replied to you in the email)
  • 08:31, 22 December 2023 151.50.14.15 talk posted a new comment on DACPi (Filter PSU board can be added?)
  • 01:13, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I was able to program around the firmware issue by removing the short for the "CHG EN" and adding a function to my python script that started charging when capacity dropped below 97% and stopped charging when capacity was at 100% or greater. Just wondering why I was forced to do that when according to the documentation, I should have been able to do it from the hardware side.)
  • 00:02, 22 December 2023 154.6.90.21 talk posted a new comment on X728-script (I'm attempting to configure an X728 v2.5 to automatically charge the battery and start the Raspberry Pi automatically when power is restored. I have shorted both the "Auto ON" and "CHG EN" and then with the unit powered off, I remove the batteries and then replace them. The result is that everything works as expected the first time power is restored, the Pi starts automatically and the battery is charging. On subsequent attempts, there is an immediate flicker on the Pi but it doesn't actua...)
  • 02:27, 21 December 2023 173.173.26.249 talk posted a new comment on PiKVM-A3 (I could use some help/advice with my PiKVM setup. I've read through the Pinned topics here and PiKVM / GeekWorm Wikis but I could be missing something so please forgive me. Hardware: - GeekWorm KVM-A3 Kit - Raspberry Pi 4B 4GB - HP Pavilion 14-v062us laptop With the laptop off, I connected my PiKVM system (HDMI and OTG USB port) to the target (my laptop) and turned the PI on. Next I turned the laptop on. I'm having two issues: 1.) H.264 / WebRTC - This option doesn't seem to work at all. I...)
  • 15:07, 20 December 2023 Walker talk contribs posted a new comment on T201 (Hello, regarding this python script, if possible, you can contact our technical support at '''support@geekworm.com ''')
  • 10:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (This is a working python script for soft shutdown sensing Pin 7 for power disconnect using Jetson GPIO. Power both the Jetson DC port and the T201 hat DC port with the same DC source and it will power on when power is connected. #!/usr/bin/env python3 import Jetson.GPIO as GPIO import time import os import subprocess # Use board pin numbering GPIO.setmode(GPIO.BOARD) # Pin to monitor for power loss POWER_LOSS_PIN = 7 # Set up the GPIO pin as input GPIO.setup(POWER_LOSS_PIN, GPIO.IN) def...)
  • 02:39, 20 December 2023 69.62.198.249 talk posted a new comment on T201 (is there developer documentation for this device? I need to know how to interface with this device when developing a soft shutdown program on power source disconnect. Pin definitions? Acceptable software and commands? Any program snippets that might help are appreciated.)
  • 10:22, 19 December 2023 Walker talk contribs posted a new comment on T201 (Hi, t201 support is button control power on/off, this Jetson Nano image you mentioned comes with Ubuntu "18.04.6 LTS (Bionic Beaver)", we haven't tested it, if it's possible, you can test it and test it.)
  • 07:52, 19 December 2023 69.62.198.249 talk posted a new comment on T201 (Is there a software shutdown when the power gets disconnected? I want it to also power down the T201 so it is not using up the battery when off. I am seeing software solutions for Raspberry Pi UPS versions but not this one. Jetson Nano image comes with Ubuntu "18.04.6 LTS (Bionic Beaver)". I could maybe run a python program as a systemd service?)
  • 10:18, 18 December 2023 Walker talk contribs posted a new comment on XScript (Hello. Normally. NASPi Gemini 2.5 is Compatible with all Raspberry Pi operating systems, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 10:12, 18 December 2023 Walker talk contribs posted a new comment on X708 (Hi, when using the X708, please use a 3.7V lithium polymer battery, or a battery with sufficient discharge capacity, otherwise the X708 will automatically cut off when used at high loads.)
  • 02:10, 17 December 2023 186.205.4.236 talk posted a new comment on X708 (Hello, I would like to ask a question, please: On the x728 model, if the power supply is turned off and the battery voltage drops below 3.0, the Raspberry will shut down. However, if the power supply returns and the battery voltage is higher than 2.6, the Raspberry does not auto power on. Does this behavior also occur with the x708 model? Thanks in advance!)
  • 21:57, 15 December 2023 76.90.108.245 talk posted a new comment on XScript (Hey, using NASPi Gemini 2.5 dual ssd expansion, I recently decided to start back from scratch and test a different OS instead of omv. The fan script was working fine before and so was xoff. I reformatted everything, put Ubuntu server on it and created script according to instructions. Can doesn’t appear to work now anymore and running xoff it starts counting down to shutdown but it doesn’t shut it down. Also, power button on the unit doesn’t reboot or shutdown the unit either, only force shu...) Tags: Mobile web edit, Mobile edit
  • 17:13, 13 December 2023 Walker talk contribs posted a new comment on X728 (Hello, X715 can be used with X728, of course, you still need to install the X715 software, the two together, will not interfere with their respective functions)
  • 17:01, 13 December 2023 Walker talk contribs posted a new comment on P173 (Hi, it's about 1mm thick)
  • 00:30, 13 December 2023 50.4.28.24 talk posted a new comment on X728 (When using with the X715 do you still install the X715 software? Will the latching switch input for bootup and shutdown control still work?)
  • 22:12, 12 December 2023 95.238.133.97 talk posted a new comment on P173 (Hello, can you please tell me the thickness of the Thermal Pad for the CPU ? I broke it and I need to replace it... (unfortunately I bought the case on Amazon and they only gave 1 set of pads) Thank you!) Tags: Mobile web edit, Mobile edit
  • 12:33, 11 December 2023 Walker talk contribs posted a new comment on X630-A3 (Ok, thanks for sharing and the advice, I think this will definitely help others!)
  • 12:31, 11 December 2023 Walker talk contribs posted a new comment on X825 (Hello, the general hard disk has certain requirements on the power supply, X825 uses a 5V 4A power supply, if in the insertion of a USB3.0 hard disk, it may cause insufficient power supply situation)
  • 02:39, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I finally fixed the issue like this: I plugged a regular screen on the computer i will use with kvm, and checked the sound works properly. This computer runs debian As root I used 'hw-probe -all" to extract the edid you can then find the edid here : EDID=/root/HW_PROBE/LATEST/hw.info/logs/edid then I created the hex file using edid-decode $EDID | grep '^[0-9,a-f][0-9,a-f] ' > edid_new.hex Transfer the file on the kvm, plug the screen cable on the kvm and tested it with: kvmd-edidconf...)
  • 02:00, 10 December 2023 94.32.245.7 talk posted a new comment on XScript (I had the same error. I'm italian too and we use the comma as separator for decimals. The solution is to modify x-c1-fan.sh file. I have done as follow: 1) Type in terminal cd ~/xscript sudo nano x-c1-fan-sh 2) Modify function get_temp { RAW_TEMP="$(cat /sys/class/thermal/thermal_zone0/temp)" TEMP="$(awk -v temp="$RAW_TEMP" 'BEGIN { printf "%0.2f", temp / 1000; exit(0) }')" echo "$TEMP" } with this function get_temp { RAW_TEMP="$(cat /sys/cl...)
  • 00:14, 10 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Hello, finally I managed to have sound with X630-A3 V1.3 and X630 v1.3 with the extra cable, changing the client Operating Sytem. I probably need to do something on Linux Client OS to emit sound, on the pikvm screen Thank you)
  • 09:07, 9 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (I reinstalled from scratch, followed carefully the instructions But with X630-A3 V1.3 and X630 v1.3 and the cable between still no sound In the wiki it it said that the only change on X630 v1.5 is the DIP switch removal, but it's also something about 'Fixed HDMI back powering issue.' should I upgrade to X630-A3 V1.6 or/and X630 v1.5 ? I tried in the former install to tweak EDID, but which one would you recommend? I'm sure my MotherBoard is able to emit sound on HDMI I red that both CSI a...)
  • 16:41, 8 December 2023 203.74.156.61 talk posted a new comment on X825 (Can I plug SSD in X825, then I plug another USB3.0 HDD in pi4b? Is the power enough?)
  • 11:56, 8 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, if you would like to investigate using this code on the Raspberry Pi 5, you can send an e-mail to our technical support（ '''support@geekworm.com '''）, and we would be happy to start a conversation with you about the Raspberry Pi 5 product.)
  • 11:48, 8 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, there should be a boost module, because this product has not been sold for a long time, and some information about the product can not be provided)
  • 08:34, 8 December 2023 24.80.232.170 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hi Walker, thanks for the reply. Does the board have DC to DC boost? I don't see there is boost. If no, how come 18650 battery powered could output 5V? Thank you)
  • 21:14, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The PWM signal is not at 25 kHz as it should using PWMLED)
  • 21:12, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (Seems to work with this code: #!/usr/bin/python from gpiozero import PWMLED import time try: servo = 13 fan = PWMLED(servo) while(1): #get CPU temp file = open("/sys/class/thermal/thermal_zone0/temp") temp = float(file.read()) / 1000.00 temp = float('%.2f' % temp) file.close() if(temp > 35): fan.value = 0.4 if(temp > 40): fan.value = 0.5 if(temp > 50):...)
  • 17:26, 7 December 2023 Walker talk contribs posted a new comment on X715 Software (Hi, because this HAT is compatible with Raspberry Pi 4B/ 3B+/3B, it hasn't been tested on Raspberry Pi 5 yet, if it is used on Raspberry Pi 5, there may be some problems, products related to Raspberry Pi 5 are being designed, please pay attention to our product updates!)
  • 11:50, 7 December 2023 50.4.166.201 talk posted a new comment on X715 Software (The hat works well with a Raspberry Pi 5 but I can not control the fan using PWM. I currently have it running as on-off with the gpiod library. Any advice on how to use PWM on the Raspberry Pi 5? Thank you for your help)
  • 10:55, 7 December 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, now the kvm-a3 version are support I2S, in the X630-A3 board with I2S interface, at the same time the KVM-A3 set comes with the I2S cable inside!)
  • 10:53, 7 December 2023 Walker talk contribs posted a new comment on X630 (X630-A3 board with I2S interface and with I2S cable)
  • 10:51, 7 December 2023 Walker talk contribs posted a new comment on X630-A3 (Hi, X630-A3 versions now support i2s,X630-A3 with I2S interface on board, capable of audio functions)
  • 10:46, 7 December 2023 Walker talk contribs posted a new comment on X876 (Hi, it is x 4, but we haven't tested the Intel Optane H10 SSD.)
  • 08:23, 7 December 2023 92.157.81.159 talk posted a new comment on PiKVM-A3 (Can you give an example of a working /boot/config.txt with I2S cable for X630-A3 + X630, what are the minimal required version of X630-A3 + X630 ?)
  • 02:05, 7 December 2023 92.157.81.159 talk posted a new comment on X630 (Which combination of X630 X630-A3 version is able of I2S audio adding the extra I2S cable ?)
  • 22:55, 6 December 2023 92.157.81.159 talk posted a new comment on X630-A3 (Which version is compatible with i2s sound ? Does sound works with X630-A3 V1.3 and X630 v1.3 ?)
  • 18:46, 6 December 2023 Walker talk contribs posted a new comment on X680 (Hi, can you provide your order number? Because all the products are tested and shipped, normally there is no problem, if possible, we hope you can send a test video to us, you can contact us via our email: '''support@geekworm.com ''')
  • 10:26, 6 December 2023 98.255.192.88 talk posted a new comment on X680 (Just received my X680 and INPUT1 HDMI doesn't work at all. If I move the same HDMI cable to another INPUT 2, 3 or 4, I can see video there so I know for a fact this is a hardware defect. I sent a support message just a little bit ago. Let's see how good their support is.)
  • 02:27, 6 December 2023 199.73.48.162 talk posted a new comment on X876 (How many PCIe lanes are on the M.2 slot? x4? If it is x4, can it be configured to be bifurcated, x2x2 to support an Intel Optane H10 SSD (x2 to Optane, x2 to QLC)?)
  • 10:59, 5 December 2023 Walker talk contribs posted a new comment on X728-script (Hello, have you encountered any unresolved issues?)
  • 10:24, 5 December 2023 Walker talk contribs posted a new comment on X650 (Thank you for your suggestion)
  • 04:40, 5 December 2023 23.83.91.176 talk posted a new comment on X728-script (Still no legit firmware? Absolute garbage of a product.)
  • 03:03, 5 December 2023 98.255.192.88 talk posted a new comment on X650 (I like the idea of having the GPIO 14, 15, and GND pins available so that you can connect serial UART cable to those pins and have serial console to the pikvm.)
  • 14:44, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (If powered by an 18650 battery, the VIN 5V pin also outputs 5V)
  • 14:36, 4 December 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, can you provide your order number? Because this product has been discontinued a long time ago)
  • 14:29, 4 December 2023 Walker talk contribs posted a new comment on LVDS2 (Hi, we only have 30PIN LVDS to HDMI adapter boards.)
  • 01:35, 4 December 2023 80.90.95.42 talk posted a new comment on LVDS2 (Hello i have 10 pin with wire lvds but i want to convert it to hdmi i want to know if there is any conversion board fot this kind of signal) Tags: Mobile web edit, Mobile edit
  • 13:43, 3 December 2023 24.80.232.170 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, when this board is powered by 18650, the VIN 5V pin cannot output 5V? The VIN 5V output only works when USB is plugged)
  • 11:24, 1 December 2023 Walker talk contribs posted a new comment on XScript (Hello, you can contact us via our email: '''support@geekworm.com ''' ,Describe your problem more clearly, By the way, provide your order number, In this way, we can better solve your problem)
  • 10:32, 1 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is 0.1mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
  • 07:39, 1 December 2023 108.18.214.172 talk posted a new comment on XScript (i also want to add that i have to reflash my sdcard. using ubuntu 22.04.3lts)
  • 07:27, 1 December 2023 108.18.214.172 talk posted a new comment on XScript (after complete this step, "Create the x-c1-pwr service". my screen just goes black. this happened about 5 times. driving me nuts.)
  • 01:14, 1 December 2023 2.80.214.35 talk posted a new comment on P511 (Three questions: Thermal Conductivity of the pads and their thickness? Why isn't there an heatsink for the ethernet transceiver? Is it possible to add a 4-5mm pad to the ethernet transceiver so it contacts with the heatsink all the way to the top of the case?)
  • 14:13, 30 November 2023 Walker talk contribs posted a new comment on P394 (Yes ,You're absolutely right.)
  • 09:51, 30 November 2023 Walker talk contribs posted a new comment on P394 (Hello, this acrylic case is compatible with the Raspberry Pi 5 active cooler, it is possible to install it in, you can refer to the installation guide)
  • 03:25, 30 November 2023 173.17.184.3 talk posted a new comment on P394 (This case CAN be used if you have already installed a PI Active cooler on your PI 5. HOWEVER, you are going to need to take the active cooler off. You'll need to use pliers to pinch the fasteners while pulling on them slightly. There is little issue with doing this. Be careful not to damage your thermal pads when removing, placing the spacer, or adding them back.)
  • 16:31, 29 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hi you can refer to it: X728 , X728 V2.5 Compared to X728 V2.1, X728 V2.5 only adds a few features, but nothing else has changed.)
  • 16:30, 29 November 2023 Walker talk contribs deleted comment #4146 on X728-hardware
  • 16:30, 29 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hi you can refer to it: https://wiki.geekworm.com/X728''' ''' X728 V2.5 Compared to X728 V2.1, X728 V2.5 only adds a few features, but nothing else has changed.)
  • 16:20, 29 November 2023 Walker talk contribs posted a new comment on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
  • 16:20, 29 November 2023 Walker talk contribs deleted comment #4144 on LVDS2
  • 16:20, 29 November 2023 Walker talk contribs posted a new comment on LVDS2 (Because it is the DIY product, so sometimes there may be the compatibility problem.There's no way to guarantee that.)
  • 11:42, 29 November 2023 47.180.217.125 talk posted a new comment on X728-hardware (I have a couple V2.1 and a couple V2.5. Hooked up to my electronics and RPi I am pulling about 6amps out. The V2.1 powers it for an hour, but the V2.5 shuts down in a couple minutes. Do they use a different setting for "over-discharge" battery voltages or something? I can't find V2.1 boards for sale anymore, so is the discharge level "hackable" on the V2.5?)
  • 17:57, 28 November 2023 159.146.47.151 talk posted a new comment on LVDS2 (hello my LM238WF2-SSK1 model screen is broken Can I plug the 30pin lvds cable coming to this screen to this board and get the image on another monitor from hdmi output)
  • 10:55, 28 November 2023 Walker talk contribs posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Hello, this product has been out of stock for a long time, can you provide us with your order number?)
  • 09:50, 28 November 2023 172.59.80.61 talk posted a new comment on P394 (This case can NOT be used if you're already installed a Pi Active cooler on your Pi 5.) Tags: Mobile web edit, Mobile edit
  • 04:56, 28 November 2023 73.162.65.105 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Ok, I figured it out. -------------------------- Get library + example file -------------------------- Arduino IDE >> Tools >> Library Manager >> SSD1306 >> Install Arduino IDE >> File >> Examples >> Adafruit SSD1306 >> ssd1306_128x64_i2c --------------------- alter definitions: --------------------- // on this board the address is not 0xDC, it is 0x3C #define SCREEN_ADDRESS 0x3C --------------------- alter setup function: --------------------- void setup() { // // EXISTING_CODE...)
  • 04:13, 28 November 2023 73.162.65.105 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (I have also come across one of these and want to get the display working. Is there a github repo showing an example of the display code that works?)
  • 15:50, 27 November 2023 Harry talk contribs posted a new comment on X400 (Yes, volumio is getting closed; Please try to download the v2.8.82 from the above link. URL：https://pan.baidu.com/s/14vwZ4F_68THCNtjSKeHBAw?pwd=0rpj Extract code：0rpj (PS: The link above is only reserved for 365 days) BTW, you could try the IQaudio DAC+ or IQaudio DAC options on the VILUMIO 3, they actually use the same decoder chip as the X400! Regards)
  • 15:41, 27 November 2023 Harry talk contribs posted a new comment on X735 Software (Hello, this script is updated to X735-script)
  • 15:41, 27 November 2023 Harry talk contribs posted a new comment on X735 Software (Hello, this script is updated to X735-script)
  • 15:22, 27 November 2023 Walker talk contribs posted a new comment on XScript (Hi, we haven't tested it on home assistant, there's no way to help you with that.)
  • 22:20, 26 November 2023 84.146.151.175 talk posted a new comment on X735 Software (And for the future better run the scripts and any software for your hardware after a delay maybe 1 or 2 minutes, because then you have a chance to uninstall the script when the system is not running after installation of your software)
  • 22:17, 26 November 2023 84.146.151.175 talk posted a new comment on X735 Software (After Installation of the Script on Raspbian, the linux system will not start correctly. When the script want to start the cooler, the RaspberryPi shut down. I checked the power and I dont find a problem. You cant login to the system top uninstall the script, so I have to start from the scratch. I don't use the script now, the cooler ist not running now. Please check your scripts ans provide a running system)
  • 19:26, 26 November 2023 176.33.68.229 talk posted a new comment on X400 (Hello, volumio is not running new versions. Is there a link to get volumio os 2.44 from you. Volumio is not as helpful as it used to be. Now it supports the companies it cooperates with. So we're stuck with the x400. I need your help.)
  • 19:26, 26 November 2023 176.33.68.229 talk posted a new comment on X400 (Merhaba, volumio yeni versiyonları çalıştırmıyor. Volumio os 2.44 sizden temin edebileceğimiz link var mı. Volumio eskisi gibi yardımcı değil. Artık işbirliği yaptığı firmaları desteklemektedir. O yüzden x400 ile ortada kaldık. Yardımınız gerek...)
  • 09:01, 26 November 2023 24.46.14.199 talk posted a new comment on XScript (How do I configure it with home assistant?) Tags: Mobile web edit, Mobile edit
  • 17:40, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, this X729 is for raspberry pi, we have not tested it on orange pi)
  • 17:39, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, this X729 is for raspberry pi, we have not tested it on orange pi)
  • 17:38, 24 November 2023 Walker talk contribs deleted comment #4126 on X729
  • 17:38, 24 November 2023 Walker talk contribs posted a new comment on X729 (Hello, similar products related to Raspberry Pi 5 are currently being designed. Please follow our WIKI and our products will be updated in the future)
  • 17:31, 24 November 2023 194.184.204.206 talk posted a new comment on NASPi (Hi, do you have any information about compatibility (I mean the necessary scripts) with OS Moode audio? Thanks)
  • 07:15, 24 November 2023 45.233.117.70 talk posted a new comment on X729 (Hi, is it compatible with orange pi 5b PLUS?)
  • 07:04, 24 November 2023 45.233.117.70 talk posted a new comment on X729 (Hi, is it compatible with orange pi 5b?)
  • 18:52, 22 November 2023 Harry talk contribs posted a new comment on How to enable I2C (Hello. This is not normal. UU indicates that the device is used in the driver. Wondering if you used other external I2C devices? Can you also upload a physical connection diagram to us? Or contact us at support@geekworm.com)
  • 18:52, 22 November 2023 Harry talk contribs deleted comment #4121 on How to enable I2C
  • 18:51, 22 November 2023 103.192.227.82 talk posted a new comment on How to enable I2C (Hello. This is not normal. UU indicates that the device is used in the driver. Wondering if you used other external I2C devices? Can you also upload a physical connection diagram to us?)
  • 07:10, 22 November 2023 68.226.119.5 talk posted a new comment on How to enable I2C (on my setup, when i run sudo i2cdetect -y 1 at address 68 it shows "UU" which I assume means unavailable. Is that normal for X728 v2.5?)
  • 18:02, 17 November 2023 Walker talk contribs posted a new comment on WEMOS ESP8266 D1 R2 V2.1 (Hello, we are no longer selling this product, but we would like to remind you that 9-24V power input. Please pay attention to the voltage setting, otherwise the board may burn out)
  • 13:08, 17 November 2023 169.0.249.12 talk posted a new comment on WEMOS ESP8266 D1 R2 V2.1 (The SDA616 voltage regulator is rated at 3.3V to 16V input - if you've given it 24V then it's toast...)
  • 12:16, 15 November 2023 Walker talk contribs posted a new comment on AMPi (Sorry for the unclear description. We have made modifications to the image. Please refer to the following figure for the speaker connection settings 500px|none|AMPi)
  • 12:15, 15 November 2023 Walker talk contribs deleted comment #4116 on AMPi
  • 12:15, 15 November 2023 Walker talk contribs posted a new comment on AMPi (Sorry for the unclear description. We have made modifications to the image. Please refer to the following figure for the speaker connection settings 700px|none|AMPi)
  • 11:14, 13 November 2023 Walker talk contribs posted a new comment on AMPi (Hello, we are sorry that there is currently no installation video for this AMPi. Have you seen the installation guide image? Are there any areas where we cannot describe clearly? We will continue to improve)
  • 10:40, 13 November 2023 Walker talk contribs posted a new comment on X735 (Hello, could you please provide your order number? you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 17:09, 12 November 2023 37.66.215.229 talk posted a new comment on X882 (Hello, just to keep you updated: I was able to find another product to plug my SSDs in RAID. It works fine. The disks are really close together, but the box have its own power supply. So I guess my problem was power supply and not FEM.)
  • 11:27, 12 November 2023 68.2.181.4 talk posted a new comment on AMPi (These are the most difficult to figure out and least intuitive instructions I have seen. First there are more parts then you need so you can get confused as to which part goes where. Second, there are not enough pictures to show the screw and spacer locations on the bottom of the board. Third, how about an installation video. I had to go to Amazon and watch a video about another board and case installation to try and figure some things out. I was expecting some pictures of the bottom and...)
  • 18:23, 10 November 2023 Walker talk contribs posted a new comment on X630-A3 (Hello, this fan is 2PIN and cannot control the fan speed)
  • 08:13, 10 November 2023 174.214.50.102 talk posted a new comment on X735 (hello. i have the x735 v2.1 installed on a rpi 3b. I installed the appropriate x730 script from the github repo as per instructions for the v2.1 hat. everything works great for a few shutdowns/reboots but, and i have tried this five times now, after a few reboots the root fs becomes locked and im greeted with a notification that the fs is corrupt and has been locked by root and system becomes unbootable. currently im using it with out the script just fir the cooling fan but it would be great...) Tags: Mobile web edit, Mobile edit
  • 04:15, 10 November 2023 85.216.54.101 talk posted a new comment on X630-A3 (Is it possible to control the fan and/or switch it off?)
  • 12:16, 8 November 2023 Walker talk contribs deleted comment #3644 on LVDS Adapter
  • 12:16, 8 November 2023 Walker talk contribs posted a new comment on LVDS Adapter (LVDS board working with 6bit single, the picture will become abnormal, and the screen will be blurred)
  • 10:05, 7 November 2023 Walker talk contribs posted a new comment on X715 (Hello, these two cannot be used together,)
  • 07:12, 7 November 2023 73.22.109.101 talk posted a new comment on X715 (Can I combine this with x708UPS hat? Are there any special precautions I would need to make?)
  • 12:21, 6 November 2023 Walker talk contribs posted a new comment on GDC (Thank you for your interest in our products)
  • 22:25, 4 November 2023 94.31.80.42 talk posted a new comment on GDC (Auf W541 von LENOVO mit E-MU1820 und mit GFORCE GTX1060Ti (ASUS Version) erfolgreich getestet :-))
  • 17:08, 2 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hello, you can refer here:[https://wiki.geekworm.com/X728-script#How_to_Use_GPIO16_to_control_battery_charging''' ''' How_to_Use_GPIO16_to_control_battery])
  • 17:08, 2 November 2023 Walker talk contribs deleted comment #4102 on X728-hardware
  • 17:08, 2 November 2023 Walker talk contribs posted a new comment on X728-hardware (Hello, you can refer here: [https://wiki.geekworm.com/X728-script#How_to_Use_GPIO16_to_control_battery_charging''' ''' How_to_Use_GPIO16_to_control_battery])
  • 14:06, 2 November 2023 68.51.90.40 talk posted a new comment on X728-hardware (I see that there is now a V2.5 on here with a GPIO to control battery charging. Does this mean you can control whether the batteries are enabled via software now? If so, that brings a whole new realm of possibilities with combining other power supply hats and using one of these as a dedicated fallback, if I'm understanding correctly.)
  • 10:25, 1 November 2023 Walker talk contribs posted a new comment on Raspberry pi 4 can't find 5ghz wifi (Thanks)
  • 10:23, 1 November 2023 Walker talk contribs posted a new comment on X708 (Hello, whether the X708 can be used on the Raspberry Pi 5, we have not tested it, and we are currently accelerating the design of Raspberry Pi 5 related products, which are expected to be on the shelves of our store soon, please pay attention to our product updates)
  • 05:21, 1 November 2023 151.34.233.251 talk posted a new comment on Raspberry pi 4 can't find 5ghz wifi (worked! changing to china worked for me for channel 149 sent from my xiaomi/redmi phone hotspot! :D)
  • 11:55, 31 October 2023 86.174.101.57 talk posted a new comment on X708 (can I use this on the new RPI5? Volts and Amps wise, it seems to be able to support it. can anyone confirm this?)
  • 17:54, 30 October 2023 Walker talk contribs posted a new comment on C779-Software (Hello, you can refer to the official information https://forums.raspberrypi.com//viewtopic.php?f=38&t=281972''' ''')
  • 14:56, 30 October 2023 73.185.60.160 talk posted a new comment on C779-Software (the code to save video on gstreamer is no longer functional, it saves as a 0byte file.)
  • 10:41, 30 October 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, now only the KVM-A3 comes with that length of USB Cable and Ethernet Cables.You can buy a longer cable yourself, but please note that ATX Conrol cable， It must be 568B line sequence, 700px|none|ATX Conrol cable)
  • 10:20, 30 October 2023 82.2.61.221 talk posted a new comment on X708-Software (Hello, is there any way to setup the x708off to be operable using a webserver specifically a php lightttpd server (raspap) I want to integrate it with raspap so I can turn my pi off using the webservice of raspap and not need to ssh to give the x708off command)
  • 03:34, 30 October 2023 130.180.66.238 talk posted a new comment on PiKVM-A3 (Do you have longer USB Cable (USB without Power for KVM) and longer Ethernet Cables (for ATX power control) in your Shop?)
  • 10:29, 24 October 2023 Walker talk contribs posted a new comment on NESPi Pro (Sorry, not at the moment)
  • 18:46, 23 October 2023 108.185.70.237 talk posted a new comment on NESPi Pro (Does anybody know of a script to use so I can power up the case using the power button?) Tags: Mobile web edit, Mobile edit
  • 09:51, 23 October 2023 Walker talk contribs posted a new comment on How to Configure RAID Setting (Hello, can you provide your order number, then you can contact us via our email: '''support@geekworm.com ' we will do our best to solve your problem)
  • 21:26, 20 October 2023 76.90.108.245 talk posted a new comment on How to Configure RAID Setting (Every time I try and set the raid0 for my drives and then check with Lsusb, It’ll be fine. Then check with Lsblk and it’ll only show /dev/sda but it won’t have /dev/sda1. And if I try and use fdisk I keep getting input/output error.) Tags: Mobile web edit, Mobile edit
  • 18:59, 20 October 2023 Walker talk contribs posted a new comment on NESPi Pro (Hello, this is not necessary, if you do not install an RTC battery, it can also be used, but the RTC module cannot be used)
  • 14:35, 20 October 2023 108.185.70.237 talk posted a new comment on NESPi Pro (Is the battery necessary?) Tags: Mobile web edit, Mobile edit
  • 14:29, 19 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, 1. First you need to determine if there is a problem with the script installation of the fan </pre> 2. If the script is ok, could you describe it in more detail about the problem </pre> 3. you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（You will need to provide your order number）)
  • 14:28, 19 October 2023 Walker talk contribs deleted comment #4084 on NASPi Gemini 2.5
  • 14:28, 19 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, 1. First you need to determine if there is a problem with the script installation of the fan 2. If the script is ok, could you describe it in more detail about the problem 3. you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（You will need to provide your order number）)
  • 10:21, 19 October 2023 186.79.209.158 talk posted a new comment on NASPi Gemini 2.5 (Hi, i just turn on the genemi like in the tutorial, but the fan start spinning, but the stop like a second later. any help?)
  • 16:12, 17 October 2023 Walker talk contribs posted a new comment on NASPi CM4-M2 (Hello. This content is the design details of the product, we have no way of knowing)
  • 04:30, 17 October 2023 82.68.20.62 talk posted a new comment on NASPi CM4-M2 (Is there any documentation available for the GPIOs used by this board. Specifically, I would like to know the functions of the GPIOs related to power management. As far as I can tell, it's something along these lines: GPIO17 [OUT, active high] - Set to indicated OS boot complete? GPIO27 [OUT, active high] - Request power off. GPIO4 [IN, active high] - Shutdown requested. It seems like GPIO17 needs to be set for GPIO4 to have any function. GPIO27 seems to have different behaviour depending o...)
  • 10:29, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (When sending the email, please provide your order number by the way)
  • 10:28, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, you can contact us via our email: '''support@geekworm.com ''' You can describe your problem as clearly as possible, and then we will help you as much as possible, (but because of the compatibility of this LVDS board, sometimes we have no way to judge))
  • 10:28, 16 October 2023 Walker talk contribs deleted comment #4078 on LVDS Adapter
  • 10:28, 16 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, you can contact us via our email: '''support@geekworm.com ''' You can describe your problem as clearly as possible, and then we will help you as much as possible, (but because of the compatibility of this LVDS board, sometimes we have no way to judge))
  • 10:23, 16 October 2023 Walker talk contribs posted a new comment on C296 (Hello, thermal paste is only used between the copper sheet and the heatsink, relatively speaking, the heat dissipation effect of using copper sheet is better than the use of thermal money)
  • 23:17, 13 October 2023 165.225.21.39 talk posted a new comment on LVDS Adapter (Sorry I don't know how to attached a photo and it seems that I can't add also in my comment a link to my picture How I can do?)
  • 23:13, 13 October 2023 165.225.21.39 talk posted a new comment on LVDS Adapter (Please find a photo of my board which come from an GPS Wipnav RNEG system for a Peugeot 308)
  • 19:08, 13 October 2023 79.193.105.217 talk posted a new comment on C296 (Was thermal paste also used between the cpu and the copper plate or only between the copper plate and the heat sink? Do you have data on the differences between the use of the copper plate and the thermal pad?)
  • 15:37, 13 October 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, because the LVDS board is compatible, we have no way to tell whether the MAX9209 is available. Can you provide a photo?)
  • 17:28, 12 October 2023 165.225.21.39 talk posted a new comment on LVDS Adapter (Hello, I ordered a V1.5 board that I would like to adapt to a driver board MAX9209 VESA std 800x600p with 3 data line (18bits). Should it work? How to know if the MAX9202 is at least a V59 grade (I didn't see anything regarding this point in the datasheet) Should I leave the 4th line O3+/- of the V1.5 board free without any modification? Thanks in advance for your help)
  • 10:08, 11 October 2023 Walker talk contribs posted a new comment on X882 (Hello, if you still have this problem after testing the HDD, please contact us in time and we will handle it for you and solve the problem.)
  • 19:40, 10 October 2023 195.220.58.237 talk posted a new comment on X882 (Hello, My order was n°TB-22-7566 I didn't try HDDs yet, i need to borrow some to try.)
  • 09:31, 10 October 2023 Walker talk contribs posted a new comment on X876 (Hello, X876 is generally used with X732, Via Type-C port of Raspberry Pi 4 or X732), we have not tested this atx power supply, but please be careful not to use inferior power supply.)
  • 20:55, 9 October 2023 37.209.212.76 talk posted a new comment on X876 (i want to use a atx power supply, can i use the x715 to power raspi 4 along wirh the x876?)
  • 18:03, 9 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, we recommend that you put it on microSD)
  • 17:30, 9 October 2023 Harry talk contribs posted a new comment on X728-script (Hi, Refer to X708#Working_principle,)
  • 17:24, 9 October 2023 Walker talk contribs posted a new comment on PiKVM-A8 (Hello, we have not tested PIKVM-A8 and X876 used together. You can refer to [https://wiki.geekworm.com/X652''' ''' X652], This product may meet your needs.)
  • 17:14, 9 October 2023 Walker talk contribs posted a new comment on C296 (Hello, we have not tested on orangepi Zero 2W)
  • 17:10, 9 October 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, can you provide your order number? Because this product has been discontinued a long time ago)
  • 17:07, 9 October 2023 Walker talk contribs posted a new comment on X876 (Hello, sorry, X876 and X735 currently do not have matching shells.)
  • 17:02, 9 October 2023 Walker talk contribs posted a new comment on PiKVM-A8 (you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 17:00, 9 October 2023 Walker talk contribs posted a new comment on PiKVM-A8 (Hello, PKVM-A8 supports audio in hardware, but we have not tested it in software. Although there is an audio interface on x630-A8, the current product list does not come with a matching audio cable.)
  • 16:54, 9 October 2023 Walker talk contribs posted a new comment on X882 (Hello, have you tried HDD? The problem you mentioned may also be caused by SSD EMC interference is relatively large, not necessarily caused by the power supply. By the way, can you provide your order number?)
  • 11:12, 9 October 2023 Walker talk contribs deleted comment #4058 on XScript
  • 11:12, 9 October 2023 Walker talk contribs posted a new comment on XScript (Thank you for your attention to our products, we will continue to update our products)
  • 11:11, 9 October 2023 Walker talk contribs posted a new comment on XScript (Thank you for your attention to our products)
  • 10:27, 9 October 2023 104.2.184.162 talk posted a new comment on PiKVM-A8 (INFO --- => [ERR] [src/audio.c:_pcm_thread:190] == ustreamer/audio -- Fatal: Can't capture PCM f> Oct 09 04:46:51 pikvm kvmd-janus[522]: kvmd.apps.janus.runner INFO --- => == ustreamer/audio -- Pipeline closed Oct 09 04:46:52 pikvm kvmd-janus[522]: kvmd.apps.janus.runner INFO --- => == ustreamer/audio -- Detected host audio Oct 09 04:46:52 pikvm kvmd-janus[522]: kvmd.apps.janus.runner INFO --- => == ustreamer/audio -- Pipeline configured on...)
  • 10:26, 9 October 2023 104.2.184.162 talk posted a new comment on PiKVM-A8 (Is audio over hdmi supported on this model? It is supported by pikvm, and everything looks right but sound doesn't come through. I checked the Janus journal file and noted a repeating pattern of the following: INFO --- => [ERR] [src/audio.c:_pcm_thread:190] == ustreamer/audio -- Fatal: Can't capture PCM f> Oct 09 04:46:51 pikvm kvmd-janus[522]: kvmd.apps.janus.runner INFO --- => == ustreamer/audio -- Pipeline closed Oct 09 04:46:52 pikvm kvmd-janus[522]: kvmd.apps.janus.ru...)
  • 08:17, 9 October 2023 67.60.180.62 talk posted a new comment on C296 (I am curious if this heatsink would work with the orangepi Zero 2W?)
  • 01:19, 8 October 2023 186.79.208.33 talk posted a new comment on NASPi Gemini 2.5 (I want to use this NasPi as a big NAS for mi Plex media server, what do you recommend? install the OS in the microSD card or in one of the HDD?)
  • 20:56, 7 October 2023 89.254.170.185 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hi, here is huge (-) in DC-DC inverter part, diodes and boost IC heating is to high, hot to touch, large ammount of energy going to heat.)
  • 20:07, 7 October 2023 84.115.220.69 talk posted a new comment on X728-script (Software safe shutdown command is not safe! It does look like it only cuts power to the pi without a correct shutdown. Noticed it only after dataloss...)
  • 16:37, 7 October 2023 86.165.158.26 talk posted a new comment on X876 (I have the X735 3.0 and the X876. I know this case doesn't accommodate the X735. Is there case that will fit the X735 3.0, RPI 4B and the X876?) Tags: Mobile web edit, Mobile edit
  • 20:29, 6 October 2023 217.180.196.235 talk posted a new comment on PiKVM-A8 (Is there a way to use the NVME X876 module with the KVM-A8 kit?)
  • 17:54, 6 October 2023 195.220.58.237 talk posted a new comment on X882 (Yes, I understand that you cannot input 5V on the 2.0 board, that was not my question. You are basically telling me that after buying a 50$ V1.3 board that is not working as intended (plus a power supply, shipping and taxes), I should either buy new HDDs or a new 2.0 board. I'm not really thrilled by this idea, and my goal was to know if there was a way to modify the 1.3 board to help solve the issue (I have access to some equipment and could for exemple build a power supply). I understand...)
  • 16:53, 6 October 2023 83.239.24.170 talk posted a new comment on XScript (small refactoring of fan-rpi.py #!/usr/bin/python3 # DON'T use pigpiod library on Nov. 24 2022 by Harry Huang #import pigpio import RPi.GPIO as IO import time import subprocess import logging servo = 18 logging.basicConfig(format='%(message)s', level=logging.DEBUG) IO.setwarnings(False) IO.setmode (IO.BCM) IO.setup(servo,IO.OUT) fan = IO.PWM(servo,2000) fan.start(0) def get_temp(): output = subprocess.run(['cat', '/sys/class/thermal/thermal_zone0/temp'], capture_output=True) temp_...)
  • 16:52, 6 October 2023 83.239.24.170 talk posted a new comment on XScript (Hi all! I was started fan on Debian! Use fan-rpi.py python script instead shell. Also I add iomem=relaxed in /boot/firmware/cmdline.txt.)
  • 12:08, 6 October 2023 Walker talk contribs posted a new comment on How to View/Partition/Format/Mount HDD/SSD (Hello, can you provide your order number? Then you can contact us via our email: '''support@geekworm.com ''' and describe your problem accurately to our technical staff, we will do our best to solve your problem)
  • 12:08, 6 October 2023 Walker talk contribs deleted comment #4044 on How to View/Partition/Format/Mount HDD/SSD
  • 12:07, 6 October 2023 Walker talk contribs posted a new comment on How to View/Partition/Format/Mount HDD/SSD (Hello, can you provide your order number? Then you can contact us via our email: '''support@geekworm.com ''' and describe your problem accurately to our technical staff, we will do our best to solve your problem)
  • 12:07, 6 October 2023 Walker talk contribs deleted comment #4043 on How to View/Partition/Format/Mount HDD/SSD
  • 12:07, 6 October 2023 Walker talk contribs posted a new comment on How to View/Partition/Format/Mount HDD/SSD (Hello, can you provide your order number, and then you can contact us via our email: '''support@geekworm.com ''' and accurately describe your problem to our technical staff, we will do our best to solve your problem)
  • 12:02, 6 October 2023 Walker talk contribs posted a new comment on X882 (1. First of all, x882 v2.0 cannot use 5V input, because dual hard drives usually require relatively large voltages, and 5V will cause insufficient power supply. 2. your mean by ‘replicate’ may not be able to solve this problem. This is more complicated. We have reported the problem you previously reported to the manufacturer. In addition to the problem you mentioned may be caused by insufficient power supply of the V1.3 version (when transferring large files), there is another possibility t...)
  • 03:43, 6 October 2023 91.66.9.56 talk posted a new comment on How to View/Partition/Format/Mount HDD/SSD (im using EXT4 on ubuntu server)
  • 00:24, 6 October 2023 91.66.9.56 talk posted a new comment on How to View/Partition/Format/Mount HDD/SSD (every time I boot the HDD is not mounted and I have to manually mount. What can I do to make it automatically mount first thing before any other process accesses it? do something in /etc/fstab ? Thanks in advance, great product!)
  • 20:32, 5 October 2023 195.220.58.237 talk posted a new comment on X882 (Thank you for your answer. You may understand that i'm not really keen to buy another board, and the 1.3 is not usable as it is whith this power input problem. On the 2.0, there seems to be components around the DC input that may be used to regulate the power from the 6-18V jack to the components requirements. I may be able to "replicate" this part of the board, but for this what would be the output specifications? Are the SSD still powered with 5V on within the 2.0 board?)
  • 18:10, 5 October 2023 Walker talk contribs posted a new comment on X-UPS1 (Hello, it’s not possible. It can only display a range and cannot read specific values in python.)
  • 17:21, 5 October 2023 Walker talk contribs posted a new comment on X735-script (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 17:17, 5 October 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, it’s not possible. This is designed for Raspberry Pi 4B. Please follow us. After Raspberry Pi 5 is released, we have plans to upgrade the product in the future.)
  • 17:09, 5 October 2023 Walker talk contribs posted a new comment on X882 (Hello, the problem you are talking about may be caused by the power supply, because dual hard drives have relatively high power requirements. The initial version 1.3 used a 5V 4A power input. Later we upgraded to version 2.0, which used a 12V 5A power input. Power supply, the current version 2.0 has solved the problem of insufficient power supply (tip: version 1.3 cannot be directly connected to 12V, because it will burn the board))
  • 17:02, 5 October 2023 Walker talk contribs posted a new comment on X728-script (Hello, we tested with ubuntu, can you explain your problem in detail via email? , you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 16:52, 5 October 2023 Walker talk contribs posted a new comment on X882 (Hello, after the Raspberry Pi 5 is released, we will also upgrade the product. Please follow us. If you have good suggestions, we are also willing to listen.)
  • 16:31, 5 October 2023 Walker talk contribs posted a new comment on XScript (Hello, NASPi Gemini 3.5 is an Ideal storage solution specially designed for Raspberry Pi 4B. OS that has been tested: Raspbian, DietPi, Manjaro, Ubuntu, myNode, Umbrel, Volumio, RetroPie, Twister. Currently we have not tested it on debian.)
  • 16:23, 5 October 2023 Walker talk contribs posted a new comment on X-UPS1 (Hello, Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50%, 75% and 100%. Only these ranges can be displayed.)
  • 20:49, 4 October 2023 185.128.30.33 talk posted a new comment on X882 (Do you think you will bring out an "Raspberry Pi 5" upgrade kit? Or do I have to buy a new gemini built for Pi5?)
  • 23:53, 1 October 2023 37.66.215.229 talk posted a new comment on X882 (Some precision: when I said "SSD are disconnecting": the Pi works well, and i got a message on raspbian specifying that the disks unmounted. when I reboot the pi, the drives are mounted back.)
  • 23:43, 1 October 2023 37.66.215.229 talk posted a new comment on X882 (Hello, I've got the version 1.3. I tried several settings but always got troubles when i try to upload a large amount of files: the SSD are disconnecting. When i tried using seafile, this issue corrupted the database and i lost all the data. Now i'm only using Samba and at least the issue only stop the current upload and don't destroy previous data. My question is: may it be related to the DC 5V power supply? I'm using a 5V10A supply, but maybe something is limited on the board? How could...)
  • 21:18, 30 September 2023 93.42.89.38 talk posted a new comment on NASPi Gemini 2.5 (Can Raspberry 5 be installed?) Tags: Mobile web edit, Mobile edit
  • 17:49, 30 September 2023 188.170.196.61 talk posted a new comment on XScript (What is about gemini 3.5? Power script does not work with RPi 4B and debian.) Tags: Mobile web edit, Mobile edit
  • 17:46, 30 September 2023 88.9.129.199 talk posted a new comment on X-UPS1 (Is it possible to read the voltage and capacity in python?)
  • 17:40, 30 September 2023 88.9.129.199 talk posted a new comment on X-UPS1 (GPIO pin layout?)
  • 02:40, 30 September 2023 76.100.173.193 talk posted a new comment on X728-script (It says it was tested with ubuntu, but it does not work with ubuntu, the system does not have the sys/class/gpio folder in its filesystem.)
  • 12:31, 29 September 2023 70.114.163.10 talk posted a new comment on X735-script (I was wondering if it was possible to remove the reboot option in the script. I want to only have safe shutdown and force shutdown. what lines should I change in the script? thank you)
  • 12:16, 29 September 2023 71.238.20.147 talk posted a new comment on X735-script (You'll have to excuse the newbie if this is a dumb question, but.... entered everything correctly, and everything on the x735 works, except when powered by 12v input system will not come up from shutdown. Button held 2-3 sec causes blue light to flicker, but that's all. Via USB-C, everything works as it should. Thoughts?)
  • 18:00, 28 September 2023 Walker talk contribs posted a new comment on NASPi CM4-M2 (Hello, they can be used together)
  • 16:01, 28 September 2023 85.73.187.148 talk posted a new comment on NASPi CM4-M2 (Hello @Geekworm, is it possible to use both ssd slots together??)
  • 14:19, 27 September 2023 Walker talk contribs posted a new comment on LVDS2 (Hello, we recommend that you buy a new LVDS2, I'm sorry)
  • 10:16, 27 September 2023 Walker talk contribs posted a new comment on P173 (Hello, we are using Japanese Shin-Etsu 7921 thermal grease. We have not tested other types of silicone grease.)
  • 02:13, 27 September 2023 195.29.186.242 talk posted a new comment on P173 (Is Arctic AC mx-4 ok for this?)
  • 18:07, 26 September 2023 141.136.192.77 talk posted a new comment on P173 (Which grease to use with copper plate?)
  • 18:03, 26 September 2023 84.199.122.154 talk posted a new comment on LVDS2 (What is the name of component U1 or can you direct me to a datasheet? I applied a too high voltage and it blew up. I want to have a look to replace it.)
  • 10:27, 26 September 2023 Walker talk contribs posted a new comment on X729-Software (Hello, first of all, to run the X729 fan or OLED, you need to run some instructions. For details, you can refer here: [https://wiki.geekworm.com/X729-Software#4._Setting_up_the_PWM_cooling_fan''' ''' fan] [https://wiki.geekworm.com/How_to_enable_OLED_display''' ''' OLED])
  • 10:11, 26 September 2023 Walker talk contribs posted a new comment on NASPi Gemini 3.5 (Hello, you can refer here: https://wiki.geekworm.com/How_to_Configure_RAID_Setting''' ''' Disconnect power supply, and choose your Raid setting, insert or remove jumper by the following jumper instruction: For RAID0 setting, Both A and B jumpers need to be shorted For RAID1 setting, Only the B jumper needs to be shorted For PM setting, No jumpers need to be shorted 700px|none|How to Configure RAID)
  • 00:20, 26 September 2023 192.55.2.36 talk posted a new comment on NASPi Gemini 3.5 (Can you point me to instructions on the power mode switch for the Gemini 3.5? I cannot locate it.)
  • 18:14, 25 September 2023 14.45.239.176 talk posted a new comment on X729-Software (i use raspberry pi4 (OMV) with x729 but not (fan & oled )working. how to run on booting?)
  • 11:38, 25 September 2023 Walker talk contribs posted a new comment on X825 V2.0 (Hello, through the DC 5V power supply port, the X825 board is first powered, and then the PI 4 is powered through the X825. You can refer to the picture below: 700px|none|How-to-Power)
  • 07:21, 23 September 2023 188.148.168.20 talk posted a new comment on X825 V2.0 (When connecting through the 5v dc connector, does that connector power both the sata drive and the Pi4 seprately, or does it power the Pi 4 and then the Pi 4 powers the sata drive through USB?)
  • 11:09, 22 September 2023 Walker talk contribs posted a new comment on LVDS2 (Hello, LVDS2 supports I2S 2-Channel)
  • 10:39, 22 September 2023 Harry talk contribs posted a new comment on DAC II (Hi, Try to select '''R-PIDAC''' in volumio3)
  • 10:03, 22 September 2023 Walker talk contribs posted a new comment on LVDS Adapter (In addition, the resolution must be the VESA standard, and the driver board should be at least V59 grade, or the driver board is not available.)
  • 10:00, 22 September 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, this LVDS board is compatible. If there is no HDMI output, it may also be caused by compatibility.)
  • 18:07, 21 September 2023 91.89.130.224 talk posted a new comment on DAC II (I have the same problem that I can't find Aoide DAC II in Volumio 3. When I try with Volumio 2 images from the list I always get the message 'This board requires newer software'. I'm also using a RPi4B.)
  • 17:48, 21 September 2023 202.232.38.130 talk posted a new comment on LVDS2 (Hello, I want to input 3ch I2S signals. Is the input specification of the I2C terminal of this product 1ch?)
  • 11:18, 21 September 2023 73.94.194.27 talk posted a new comment on LVDS Adapter (Hello. I am trying to get output from an industrial machine control that has an LCD panel. I have the v20 board and LVDS2 board but I cannot get either to work. No HDMI output. Any chance this will work with an industrial device or does it have to be a generic driver board? Also, if only 3.3v is being supplied by the driver how should 5v be supplied? Do you have to cut wires?)
  • 09:41, 21 September 2023 Harry talk contribs posted a new comment on NASPi CM4-M2 (Hi, the pwm fan control pin is GPIO18)
  • 00:50, 21 September 2023 87.123.242.79 talk posted a new comment on NASPi CM4-M2 (I'd like to know what are the GPIO Pins of the 3-Pin Fan socket?)
  • 12:19, 19 September 2023 Walker talk contribs posted a new comment on X-UPS1 (Hello, usually between 0-50 degrees)
  • 12:03, 19 September 2023 Walker talk contribs posted a new comment on X708 ("Anonymous user #27", you can contact us via our email: support@geekworm.com we will do our best to solve your problem)
  • 11:59, 19 September 2023 Walker talk contribs posted a new comment on X728 (Thank you for your suggestion, we will take your suggestions into account. Please pay attention to our products if they are updated in the future.)
  • 09:50, 19 September 2023 118.103.93.114 talk posted a new comment on X-UPS1 (Please tell me the operating temperature range and storage temperature range.)
  • 07:16, 19 September 2023 186.84.89.31 talk posted a new comment on X708 (Hello, I need the same. Did they finally help you? Could you help me? I have a Li ion battery in very good condition and at 1% capacity it can work for hours. The capacity reading is wrong.)
  • 23:42, 18 September 2023 5.20.159.89 talk posted a new comment on X728 (It would be a perfect UPS if there was some sort of thermal monitoring present (mainly for safety: stop charging and low and high temp). Please consider adding temperature sensors for batteries in your next board revision.)
  • 12:03, 15 September 2023 Walker talk contribs posted a new comment on XScript (Hello, you can contact us via our email: '''support@geekworm.com ''' ((Please provide your order number)) we will do our best to solve your problem)
  • 09:23, 15 September 2023 Walker talk contribs posted a new comment on PiKVM-A8 (Hello, KVM-A8 only supports Raspberry Pi 4B and does not support orange pi 4 compute module.)
  • 15:41, 14 September 2023 46.232.121.123 talk posted a new comment on XScript (pi@raspberrypi:~/xscript $ sudo systemctl status x-c1-fan.service ● x-c1-fan.service - Daemon to monitor and control fan speed Loaded: loaded (/lib/systemd/system/x-c1-fan.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2023-09-14 07:29:03 BST; 58min ago Main PID: 461 (bash) Tasks: 2 (limit: 1599) CPU: 18.604s CGroup: /system.slice/x-c1-fan.service ├─ 461 bash /usr/local/bin/x-c1-fan.sh └─41092 sleep 5 Se...)
  • 15:38, 14 September 2023 46.232.121.123 talk posted a new comment on XScript (Hi NASPi Gemini 3.5 with Raspberry Pi 64bit Lite, fan not working : ()
  • 14:34, 14 September 2023 91.196.69.102 talk posted a new comment on PiKVM-A8 (Anyone know if this device will work with an orange pi 4 compute module? It is far more cost effective.)
  • 10:40, 14 September 2023 Walker talk contribs posted a new comment on P373 (Hello, there are two solutions for cooling Option 1: Use a blue thermal pad， Option 2: Do not use the blue thermal pad. You can use copper pad and silicone grease to dissipate heat You can refer to the picture below： 700px|none|Two solutions for cooling)
  • 10:39, 14 September 2023 Walker talk contribs posted a new comment on P232 (Hello, there are two solutions for cooling Option 1: Use a blue thermal pad Option 2: Do not use the blue thermal pad. You can use copper pad and silicone grease to dissipate heat You can refer to the picture below 700px|none|Two solutions for cooling)
  • 10:36, 14 September 2023 Walker talk contribs deleted comment #3985 on P232
  • 10:35, 14 September 2023 Walker talk contribs posted a new comment on P232 (Hello, there are two solutions for cooling 1. Use a blue thermal pad 2. If you don’t want to use the blue thermal pad. Copper sheets and silicone grease can be used You can refer to the picture below 700px|none|Two solutions for cooling)
  • 07:55, 14 September 2023 99.8.154.37 talk posted a new comment on P373 (In what situation should the copper pad be used instead of the large blue thermal pad?)
  • 07:52, 14 September 2023 99.8.154.37 talk posted a new comment on P232 (Question: Pardon me for being a bit dense, but, in what situation should the copper pad be used instead of the large blue thermal pad? I assume they aren't intended to be used together.)
  • 17:31, 12 September 2023 Walker talk contribs posted a new comment on X735-script (Hello, X735 can implement shutdown command. For details, you can refer here: [https://wiki.geekworm.com/X735-script#Prepair_software_shutdown_script''' '''software shutdown script ])
  • 17:27, 12 September 2023 Walker talk contribs deleted comment #3981 on X735-script
  • 17:22, 12 September 2023 Walker talk contribs posted a new comment on X735-script (Hello, X735 can use the shutdown command. For details, you can refer to here: ===Prepair software shutdown script=== sudo cp -f ./x735-softsd.sh /usr/local/bin/ <pre> Create a alias <code>x735off</code> command to execute the software shutdown <pre> echo "alias x735off='sudo /usr/local/bin/x735-softsd.sh'" >> ~/.bashrc source ~/.bashrc </pre> Then you can run <code>x735off</code> to execute software shutdown.)
  • 17:22, 12 September 2023 Walker talk contribs deleted comment #3980 on X735-script
  • 17:21, 12 September 2023 Walker talk contribs posted a new comment on X735-script (Hello, X735 can use the shutdown command. For details, you can refer to here: ===Prepair software shutdown script=== sudo cp -f ./x735-softsd.sh /usr/local/bin/ Create a alias <code>x735off</code> command to execute the software shutdown <pre> echo "alias x735off='sudo /usr/local/bin/x735-softsd.sh'" >> ~/.bashrc source ~/.bashrc </pre> Then you can run <code>x735off</code> to execute software shutdown.)
  • 17:19, 12 September 2023 Walker talk contribs deleted comment #3979 on X735-script
  • 17:18, 12 September 2023 Walker talk contribs posted a new comment on X735-script (Hello, X735 can use the shutdown command. For details, you can refer to here: ===Prepair software shutdown script=== </pre> sudo cp -f ./x735-softsd.sh /usr/local/bin/ Create a alias <code>x735off</code> command to execute the software shutdown <pre> echo "alias x735off='sudo /usr/local/bin/x735-softsd.sh'" >> ~/.bashrc source ~/.bashrc </pre> Then you can run <code>x735off</code> to execute software shutdown.)
  • 17:15, 12 September 2023 Walker talk contribs deleted comment #3978 on X735-script
  • 17:14, 12 September 2023 Walker talk contribs posted a new comment on X735-script (Hello, X735 can use the shutdown command. For details, you can refer to here: ===Prepair software shutdown script=== sudo cp -f ./x735-softsd.sh /usr/local/bin/ Create a alias <code>x735off</code> command to execute the software shutdown <pre> echo "alias x735off='sudo /usr/local/bin/x735-softsd.sh'" >> ~/.bashrc source ~/.bashrc </pre> Then you can run <code>x735off</code> to execute software shutdown.)
  • 17:14, 12 September 2023 Walker talk contribs deleted comment #3977 on X735-script
  • 17:14, 12 September 2023 Walker talk contribs posted a new comment on X735-script (你好,X735是可以实现使用关机命令的，具体的您可以参考这里： ===Prepair software shutdown script=== sudo cp -f ./x735-softsd.sh /usr/local/bin/ Create a alias <code>x735off</code> command to execute the software shutdown <pre> echo "alias x735off='sudo /usr/local/bin/x735-softsd.sh'" >> ~/.bashrc source ~/.bashrc </pre> Then you can run <code>x735off</code> to execute software shutdown.)
  • 12:09, 12 September 2023 99.236.210.86 talk posted a new comment on X735-script (This is going to sound dumb but I know it states that you cant use the shutdown command but is the reboot command still safe to use.)
  • 18:33, 11 September 2023 Harry talk contribs posted a new comment on XScript (Hi, When you turn on the power again, please increase the interval time, for example, wait for about one minute and then try again.)
  • 04:41, 9 September 2023 217.122.138.25 talk posted a new comment on XScript (For three days, autopower on worked normally. Now i shutdown the unit with script, i remove energy, put it back again, but the unit is not poweron automatically. I have to press the button. Do you have any advice?)
  • 18:07, 8 September 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, PWM fans can be purchased here: https://www.aliexpress.us/item/3256804024882036.html?gatewayAdapt=glo2usa4itemAdapt)
  • 16:05, 8 September 2023 89.115.62.4 talk posted a new comment on NASPi Gemini 2.5 (I need to buy a new fan for my Naspi Gemini 2.5. Where can I find a fan?)
  • 10:12, 8 September 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, those three heatsink are given as a gift, they are used to cool the Raspberry Pi 4B motherboard (it can be directly attached to the CPU, RAM, and USB management chip of the Raspberry Pi 4B))
  • 22:53, 7 September 2023 74.83.90.226 talk posted a new comment on PiKVM-A3 (The kit I bought on Amazon came with 3 heatsinks, but it doens't show in the instructions here or the linked video where to put them. Can you attach an image showing where to stick them on please?)
  • 10:10, 7 September 2023 Walker talk contribs posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Hello, we have not sold this product a long time ago, when did you buy it? Can you provide your order number?)
  • 03:20, 7 September 2023 87.166.18.52 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Picture labels misleading, or is there a ESP32 also with identically looking picture as the ESP8266?) Tags: Mobile web edit, Mobile edit
  • 10:59, 4 September 2023 Walker talk contribs posted a new comment on PiKVM-A8 (Hello, KVM-A8 may be different from KVM-A3 in terms of chip and composition. So the cost of KVM-A8 is higher)
  • 16:02, 1 September 2023 213.244.207.66 talk posted a new comment on PiKVM-A8 (Yes, I can see that - the A8 is the one I'd prefer. But it has less cables, no case, one less PCB, so it's cheaper for you to make... but it's 20% more expensive to buy! It's made me not want to buy it)
  • 11:10, 1 September 2023 Walker talk contribs posted a new comment on LVDS Adapter (LVDS Cable can be purchased here; https://www.aliexpress.us/item/2255801103184720.html?gatewayAdapt=glo2usa4itemAdapt''' ''')
  • 10:46, 1 September 2023 Walker talk contribs posted a new comment on LVDS Adapter (Hello, we recommend you to buy a new LVDS cable)
  • 10:02, 1 September 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, the LED behind the power button currently cannot be turned off. You can try other physical methods to reduce its brightness. For example, you can use black tape (or some other dark-colored objects) to cover the LED light.)
  • 18:01, 31 August 2023 188.24.137.39 talk posted a new comment on LVDS Adapter (I broke the LVDS cable and I have to re pin the end that goes into the board. What is the part number for the 30 pin connector and pins/terminals?)
  • 15:14, 31 August 2023 78.131.51.244 talk posted a new comment on NASPi Gemini 2.5 (Is there any way to completely switch off, or at least lower the brightness of the led behind the power button? It shines the whole room in the night...)
  • 10:08, 31 August 2023 Walker talk contribs posted a new comment on PiKVM-A8 (KVM-8 is designed for user convenience, it is directly inserted into the computer case as a PCI card. So, you can put a computer into your computer. It does not require additional cables and is more convenient to users)
  • 09:55, 31 August 2023 Walker talk contribs posted a new comment on P232 (Thank you very much for your feedback, we will try our best to improve our products)
  • 09:52, 31 August 2023 Walker talk contribs posted a new comment on X832 (Hello, X832 supports Raspberry Pi 4 Model B)
  • 03:33, 31 August 2023 213.244.207.66 talk posted a new comment on PiKVM-A8 (Why is the A8 so much more than the A3? It has less parts and no case!)
  • 19:31, 30 August 2023 82.37.237.222 talk posted a new comment on P232 (Hello. The quality of this case is amazing, with a perfect fit for my Rpi 4. The package even comes with spare screw and spare thermal tapes. Perfect value for money. Many thanks Tony (UK))
  • 18:16, 30 August 2023 151.56.11.11 talk posted a new comment on X832 (is it compatible with raspberry pi 3?)
  • 15:43, 30 August 2023 Walker talk contribs posted a new comment on PiKVM (Hello, could you please provide your order number? Then you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 18:14, 29 August 2023 182.76.37.66 talk posted a new comment on PiKVM (I want to integrate camera module to pikvm os. Can you help me with the command lines.)
  • 11:55, 28 August 2023 Harry talk contribs posted a new comment on X729-hardware (Hi, what specifications has "external battery"? (2-li-io cells in order or in parallel?) ==Normal 18650 battery will "external battery" be loaded via WideDC? with 3.000mA? ==Of course, the external battery is charged also via wide range DC. will "external battery" be checked for status (full, 50%, almost empty) and then reported via script? ==Of course. is it possible to build an external battery myself? or are ic chips needed to ...do some stuff "inside" the "external battery"? ==N...)
  • 11:55, 28 August 2023 Harry talk contribs deleted comment #3951 on X729-hardware
  • 11:55, 28 August 2023 14.153.1.188 talk posted a new comment on X729-hardware (Hi, what specifications has "external battery"? (2-li-io cells in order or in parallel?) ==Normal 18650 battery will "external battery" be loaded via WideDC? with 3.000mA? ==Of course, the external battery is charged also via wide range DC. will "external battery" be checked for status (full, 50%, almost empty) and then reported via script? ==Of course. is it possible to build an external battery myself? or are ic chips needed to ...do some stuff "inside" the "external battery"? ==N...)
  • 11:31, 28 August 2023 Walker talk contribs posted a new comment on X729-hardware (Hello, X729 can connect an external battery through the 4 positions in the figure, and the battery structure is parallel connection 500px|none|Interface)
  • 11:19, 28 August 2023 Walker talk contribs posted a new comment on X728 (Hello, the maximum support of x728 is 5V, and the voltage of 12V cannot be used)
  • 11:12, 28 August 2023 Walker talk contribs posted a new comment on X885-software (ok thank you very much)
  • 03:42, 28 August 2023 84.52.228.93 talk posted a new comment on X728 (can the unit handle 12V input on the USB C port?)
  • 02:55, 27 August 2023 70.15.36.24 talk posted a new comment on How to enable I2C (I'm trying to add this to homeassistant os for the rpi. Any suggestions? It's not systems. I'd really like for a backUPS unit to be on my smart home brain.)
  • 23:40, 26 August 2023 193.124.150.112 talk posted a new comment on X729-hardware (How is it possible to connect a external battery? what specifications has "external battery"? (2-li-io cells in order or in parallel?) will "external battery" be loaded via WideDC? with 3.000mA? will "external battery" be checked for status (full, 50%, almost empty) and then reported via script? is it possible to build an external battery myself? or are ic chips needed to ...do some stuff "inside" the "external battery"? looking forward for a reply! simon)
  • 22:04, 25 August 2023 182.55.85.254 talk posted a new comment on X885-software (12V 2.5A adaptor works for me. It will consume 30W instead of 60W.)
  • 10:46, 24 August 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, can you provide your order number? This product has not been sold for a long time)
  • 01:40, 24 August 2023 94.224.110.103 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (I would like to monitor charge current and battery voltage. Do you have a schematic of the board? So i can see where to take my measurements.) Tags: Mobile web edit, Mobile edit
  • 14:31, 23 August 2023 Walker talk contribs posted a new comment on X885-software (It is recommended to use our 12V 5A 60W high quality power supply: thumb|none| Our power supply can be purchased here: [https://www.aliexpress.us/item/2251832783446935.html?gatewayAdapt=glo2usa4itemAdapt ''' ''' 12V 5A Power Supply])
  • 14:30, 23 August 2023 Walker talk contribs deleted comment #3940 on X885-software
  • 14:30, 23 August 2023 Walker talk contribs posted a new comment on X885-software (It is recommended to use our 12V 5A 60W high quality power supply: thumb|none|PSU60 Our power supply can be purchased here: [https://www.aliexpress.us/item/2251832783446935.html?gatewayAdapt=glo2usa4itemAdapt ''' ''' 12V 5A Power Supply])
  • 00:27, 23 August 2023 182.55.85.254 talk posted a new comment on X885-software (The py script is missing the KeyboardInterrupt. Hence you are getting this error. You can modify the script, else just ignore.)
  • 00:25, 23 August 2023 182.55.85.254 talk posted a new comment on X885-software (I had the same issue. The issue was with insufficient power. HDD draws more power, hence you need to match the power requirement.)
  • 13:04, 22 August 2023 Harry talk contribs posted a new comment on XScript (Hi, Try to run the command： sudo systemctl status x-c1-fan.service)
  • 20:59, 21 August 2023 86.181.70.234 talk posted a new comment on XScript (Hi, Is there anyway to report on the fan speed through he script? I can see that the fan is running and I'd like to see the Pi Temp and Fan speed? Thanks Richard)
  • 12:00, 21 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Must be 568B line sequence)
  • 11:59, 21 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Refer to File:RJ45-PINOUT.png File:RJ75-568B.png)
  • 11:59, 21 August 2023 Harry talk contribs deleted comment #3933 on PiKVM-A3
  • 11:58, 21 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Refer to [[File::RJ45-PINOUT.png]] and File:RJ75-568B.png)
  • 11:01, 21 August 2023 Walker talk contribs posted a new comment on XScript (Hello, what product did you purchase? If you encounter a problem that is difficult to solve, you can contact us by email: '''support@geekworm.com ''' and describe your problem clearly, we will try our best to solve your problem, thank you)
  • 10:54, 21 August 2023 Walker talk contribs posted a new comment on C779 (Hello, C779 supports 720p50\720p60\1080i50\1080p25)
  • 02:52, 20 August 2023 79.47.134.22 talk posted a new comment on XScript (Line 184 is: " printf -v CUR_TEMP %0.0f "$TEMP" # Convert float to int" Return invalid Number in daemon service. S.O raspberrypi 6.1.29-v8+ #1652 SMP PREEMPT Wed May 24 14:46:55 BST 2023 aarch64 locale: LANG=it_IT.UTF-8 LANGUAGE=it_IT.UTF-8 LC_CTYPE="it_IT.UTF-8" LC_NUMERIC="it_IT.UTF-8" LC_TIME="it_IT.UTF-8" LC_COLLATE="it_IT.UTF-8" LC_MONETARY="it_IT.UTF-8" LC_MESSAGES="it_IT.UTF-8" LC_PAPER="it_IT.UTF-8" LC_NAME="it_IT.UTF-8" LC_ADDRESS="it_IT.UTF-8" LC_TELEPHONE="it_IT.UTF-8" LC_MEASUREM...) Tags: Mobile web edit, Mobile edit
  • 16:40, 19 August 2023 51.158.237.153 talk posted a new comment on C779 (hello im using this module for gopro7 but i have alot of lag and latency in recorded video and streaming.what should i do?)
  • 18:26, 18 August 2023 77.250.130.133 talk posted a new comment on PiKVM-A3 (For the ATX Control I'd like to make my own cable with RJ45 on one and and pin connectors on the other end (skipping the case module). Could you please let me know which RJ45 pin connects to which ATX pin?)
  • 15:38, 18 August 2023 88.130.219.187 talk posted a new comment on C779 (Does it accept low resolutions like 640x240?)
  • 15:02, 18 August 2023 Harry talk contribs posted a new comment on XScript (Hi. I reply to you via email. About '''FAN FS''', refer to picture: 800px)
  • 14:54, 18 August 2023 Harry talk contribs deleted comment #3925 on XScript
  • 14:54, 18 August 2023 Harry talk contribs deleted comment #3923 on XScript
  • 14:54, 18 August 2023 Harry talk contribs posted a new comment on XScript (Hi, You can refer to File:IMG_3713-compare-NEW.jpg)
  • 14:53, 18 August 2023 Harry talk contribs deleted comment #3924 on XScript
  • 14:53, 18 August 2023 Harry talk contribs posted a new comment on XScript (Hi, You can refer to File:File:IMG_3713-compare-NEW.jpg)
  • 19:17, 17 August 2023 93.210.255.43 talk posted a new comment on XScript (What does "Add FAN FS jumper to control the PWM fan; Because we found that there are some beginners who don't know how to install the script to make the PWM fan run, or the installation script doesn't support 3rd party OS, at this time, you just need to remove the FAN FS jumper, the PWM fan will run at full speed." mean? How can I remove the FAN FS jumper?)
  • 19:15, 17 August 2023 93.210.255.43 talk posted a new comment on XScript (Hi Harry, thanks for your fast reply. I bought Naspi V2.0 2,5 Inch for Raspberry Pi 4. I completed the assembly of the product hardware and my Raspberry Pi 4 ist running. I used the Linux distribution "RaspiBlitz". Currently I am downloading BTC Blockchain and the Raspberry is at 84 degrees Celsius.. so I really would like to get the fan running.. I dont understand anythiung from this tutorial and I dont think this is straight forward for beginners.. Hope that clarifies my situation. DK101)
  • 17:46, 17 August 2023 Harry talk contribs posted a new comment on XScript (Hi, First of all, I don't know exactly what product you bought. But before the script installation, you can complete the assembly of the product hardware by watching the video or installation guide, and then download the OS, flash the OS and other operations. Then complete the installation of the script with this tutorial. This tutorial is relatively simple, I'm sorry I don't know how I can help you. Harry / Geekworm Team)
  • 16:35, 17 August 2023 93.210.255.43 talk posted a new comment on XScript (Hey there, Im a total noob regarding such stuff... the tutorial above just leaves me with a lot of questions :D I run RaspiBlitz OS and trying to figure out how to activate the fan.. any advise? Regards DK101)
  • 11:21, 15 August 2023 Walker talk contribs posted a new comment on X703 (''NOT supports software safe shutdown'' means that the function of safe shutdown cannot be realized by inputting commands or other operations. At present, the shutdown function can be realized through the blue button on the X703)
  • 22:32, 14 August 2023 81.14.205.62 talk posted a new comment on X703 (What does "NOT supports software safe shutdown" exactly mean? How do I shut down the raspberry then? Is it only possible with the blue button? Oder can I use "sudo shutdown now" command via shell?)
  • 16:23, 14 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Thanks for your feedback. We will also replace it with a better fan soon. Regards.)
  • 12:21, 14 August 2023 Walker talk contribs posted a new comment on GDC (Hello, we haven't sold this product for a long time, can you provide your order number? Then you can send it to our email: '''support@geekworm.com ''')
  • 07:55, 14 August 2023 76.226.71.35 talk posted a new comment on GDC (Can the mini-PCIe be converted to M.2 M-Key? if yes, how? All I can find are adapters for the reverse direction.)
  • 01:00, 13 August 2023 94.252.2.118 talk posted a new comment on PiKVM-A3 (I replaced the original fan with a Noctua NF-A4X10-FLX 5V I had lying around. Admittedly, I had to cut the original fan cable and 'MacGyver' the header connector to the Noctua fan (which I also had to shorten). One thing to note -> since I put a 40mm fan inside a 30mm fan opening, it does not fit completely, however, there is just barely enough space to jam the new fan firmly in place over part of the opening, which gives it enough airflow. Results: Cooler temps, low noise, no vibration.)
  • 00:44, 13 August 2023 94.252.2.118 talk posted a new comment on PiKVM-A3 (Replying to my orignal post - I don't believe it is possible to have the wake-up feature. I looked up the RTC chip online and it just doesn't have the wakealarm functionality built in the hardware (though if someone somehow pulls it off, by all means, please explain it here) The PiKVM v3 HAT has a different RTC chip, which supports this feature, but for the price diff, it's not worth it for me, given that we even have support for all major features, incl. audio. Hence, I recommend changing th...)
  • 02:28, 12 August 2023 76.135.126.21 talk posted a new comment on PiKVM-A3 (Any update on this issue? Is is possible to get wakeup support with the X630-A3 and ds1307 RTC?)
  • 16:20, 11 August 2023 Walker talk contribs posted a new comment on X728 (Hello, X728 we have designed a shell, you can buy it directly: https://www.aliexpress.com/item/3256804044629965.html?gatewayAdapt=4itemAdapt ''' ''')
  • 16:06, 11 August 2023 Walker talk contribs posted a new comment on X735 Software (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 16:05, 11 August 2023 Walker talk contribs deleted comment #3909 on X735 Software
  • 16:04, 11 August 2023 Walker talk contribs posted a new comment on X735 Software (Hello, you can contact us via our email: support@geekworm.com , we will do our best to solve your problem)
  • 11:58, 11 August 2023 78.35.96.156 talk posted a new comment on XScript (I forgot to mention that my Raspbian is set to german locale. We are using a comma as decimal separator (e.g. 40,4 insteda of 40.4 °C. I think this causes the error, right? Stony)
  • 04:39, 11 August 2023 78.35.96.156 talk posted a new comment on XScript (Hi, I'm using Raspbian GNU/Linux 10 (buster))
  • 00:31, 11 August 2023 73.240.5.34 talk posted a new comment on X728 (Hello, another user who wishes to design a custom enclosure, who requests a STEP model file to reference the dimensions and component placement.)
  • 18:10, 10 August 2023 Harry talk contribs posted a new comment on XScript (Hi, Stony Thanks for your feedback. Want to know what OS you are using? Is it the official system of Raspberry Pi? We recommend that you reply to us via email '''support@geekworm.com''')
  • 17:57, 10 August 2023 Harry talk contribs posted a new comment on X650 (Yes, you are right.We wrote a comma missing, thanks for the correction. And we correct it in wiki.)
  • 17:48, 10 August 2023 89.220.239.145 talk posted a new comment on X735 Software (hello, I had the x735 v2 worked on my raspbarry whit twister and it worked fine. i could rean the fan, safe shutdown worked to. Now i have a new sd in it whit ubuntu 23.04 and i have some problems. i program everthing as was standing above for ubuntu server. what i'm doing wrond. when ubuntu start only thing what is does is spinning but no controll or reading. it looks like he missing some files or directory. here some of my issues. pi@pi-desktop:~$ sudo apt-get install -y wiringpi python py...)
  • 04:48, 10 August 2023 78.35.96.156 talk posted a new comment on XScript (Hi, I successfully installed the X-Script on my Naspi and it works perfectly! But I see countless entries in the daemon.log every 5 seconds: x-c1-fan.sh[483]: /usr/local/bin/x-c1-fan.sh: Zeile 184: printf: 38.46: Ungültige Zahl. "Ungültige Zahl" means "invalid number". Line 184 is: " printf -v CUR_TEMP %0.0f "$TEMP" # Convert float to int" Do you know what causes this and how to fix this? Thanks a lot! Stony)
  • 04:43, 10 August 2023 95.115.31.50 talk posted a new comment on X650 (Shouldn't it be dtoverlay=i2c-rtc,ds1307 instead of dtoverlay=i2c-rtcds1307?)
  • 10:23, 9 August 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, if you don't want to use battery power supply, it depends on the voltage of the device you connect, if it is 3.3V, you can choose to connect to VIN 3.3V and GND (you can also connect to VIN 5V and GND), if it is If it is 5V, it can only be connected to VIN 5V and GND (cannot be connected to VIN 3.3V), you can refer to the following figure: 500px|none|ESP32-Board)
  • 20:03, 8 August 2023 103.121.17.22 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (if im not using battery or usb which pin for the supply ?)
  • 17:59, 8 August 2023 Harry talk contribs posted a new comment on X883 (Sorry No matching case now. Dimensions source file (DXF): File:X883-V1.2-DWG.dxf)
  • 17:59, 8 August 2023 Harry talk contribs deleted comment #3893 on X883
  • 17:56, 8 August 2023 Harry talk contribs deleted comment #3897 on X950 software
  • 17:54, 8 August 2023 Harry talk contribs posted a new comment on X950 software (for the picoreplayer the correct hardware is the '''Audiophonics ISabre Q2M''' hw:CARD=DAC,DEV=0 - I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0 Thanks to Ignace Sannen)
  • 17:46, 8 August 2023 Harry talk contribs posted a new comment on X680 (You can also make your own ATX control cable, in fact, it is a normal Ethernet cable, and the requirements must be 568B line sequence File:RJ75-568B.png)
  • 17:40, 8 August 2023 Harry talk contribs posted a new comment on X680 (Hi, RJ45 head 568B line sequence. In fact, the connection method of the general network cable is 568B)
  • 17:10, 8 August 2023 2.136.192.159 talk posted a new comment on X703 (Where can I find the schematic of this product?)
  • 19:23, 7 August 2023 Walker talk contribs posted a new comment on X883 (Hello, there is currently no shell available for the X883 board, you can refer to the size drawing of the X883 to 3D print it yourself 700px|none|X883 Size)
  • 05:00, 7 August 2023 85.233.56.167 talk posted a new comment on X883 (Hi, is there a case available? To buy or to 3d print ?) Tags: Mobile web edit, Mobile edit
  • 02:56, 7 August 2023 23.118.44.211 talk posted a new comment on X950 software (Using piCorePlayer 8.2.0 64-bit, and don't get any sound. I tried "RPi DAC (last choice)" as "Anonymous 2" suggested, but still no sound. My old HiFiBerry DAC+ works fine with the same installation. The hardware seems nice though.)
  • 14:10, 4 August 2023 Harry talk contribs deleted comment #3879 on PiKVM-A3
  • 14:09, 4 August 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (You can google Raid mode or refer to Raid Instruction)
  • 14:08, 4 August 2023 Harry talk contribs deleted comment #3889 on NASPi Gemini 2.5
  • 14:08, 4 August 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (You can google 'PM')
  • 10:18, 4 August 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (How to Configure RAID Setting)
  • 10:15, 4 August 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Switch to PM mode, and the two hard disks run independently, so that two hard disks can be recognized. If you select the RAID0/RAID1 mode., only one hard disk can be recognized. Please refer to here for specific operations: https://wiki.geekworm.com/How_to_Configure_RAID_Setting''' ''')
  • 17:16, 3 August 2023 125.168.77.114 talk posted a new comment on NASPi Gemini 2.5 (In the RAID configuration legend printed on the board, what is "PM"?)
  • 14:06, 3 August 2023 Harry talk contribs posted a new comment on X450/X5500 Software Configuration (for the picoreplayer the correct hardware is the Audiophonics ISabre Q2M)
  • 11:54, 3 August 2023 Walker talk contribs posted a new comment on X306 (Please email to support@geekworm.com, we will try our best to solve your problem)
  • 11:49, 3 August 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, if you need an I2S audio cable in the future, you can buy it here: https://www.aliexpress.us/item/3256805721728180.html?gatewayAdapt=glo2usa4itemAdapt''' ''' You don't have to buy the X630-A2 audio HAT)
  • 11:44, 3 August 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, you can buy I2S audio cable here ： https://www.aliexpress.us/item/3256805721728180.html?gatewayAdapt=glo2usa4itemAdapt''' ''')
  • 10:17, 3 August 2023 Harry talk contribs posted a new comment on P165 (Hi， #The thread length is 0.45mm for M2.5 screw.Basically, you can buy any M2.5, just pay attention to the length #The standoff depend on the height of your hat.)
  • 10:16, 3 August 2023 Harry talk contribs deleted comment #3880 on P165
  • 10:12, 3 August 2023 Harry talk contribs posted a new comment on P165 (Hi, #The thread length is 0.4mm for M2.5 screw. #The standoff depend on the height of your hat.)
  • 10:05, 3 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Please email to support@geekworm.com, it is too expensive to buy an x630-A2 on AMZ just for one I2S cable)
  • 10:04, 3 August 2023 Harry talk contribs deleted comment #3846 on PiKVM-A3
  • 05:49, 3 August 2023 37.201.240.80 talk posted a new comment on X306 (How is the IN-to-SYS pass-through path, to pass the input voltage to the system, implemented and how can I configure and access it?)
  • 22:16, 2 August 2023 189.207.62.48 talk posted a new comment on PiKVM-A3 (Buy the X630-A2 audio HAT from amaz)
  • 22:15, 2 August 2023 189.207.62.48 talk posted a new comment on PiKVM-A3 (I tried the I2S audio cable from X630-A2 audio HAT and it worked on my X630-A3 setup.)
  • 11:48, 2 August 2023 202.169.117.18 talk posted a new comment on P165 (Hello, for P165-b What is the thread length of provided M2.5 screws? And which standoff do you recommend for mounting HAT on top?)
  • 11:29, 2 August 2023 Harry talk contribs posted a new comment on T208-hardware (Hi, Please provide more detail via email to Support@geekworm.com)
  • 10:49, 2 August 2023 Walker talk contribs posted a new comment on P165 (Hello, first of all, P165-B supports the installation of a 30 * 30mm fan using KM3 * 14mm screws P165-A, supports the installation of 25 * 25mm fans, using PM2.5x10mm screws)
  • 17:23, 1 August 2023 1.241.20.20 talk posted a new comment on T208-hardware (Hello, I bought two sets of T208 V2.0 and connected with Jetson Nano. When I unplug power plug, both T208 and Jetson nano switched off immediately without power loss detection in both case of FON short and open, while T208 V1.2 which I bought last year works well. Please let me know how I can check the PLD status or anything I misunderstood.)
  • 15:07, 1 August 2023 24.19.12.152 talk posted a new comment on PiKVM-A8 (This was kind of driving me nuts, too. The diagram doesn't really show the polarity. To add what Anonymous user #2 said for anyone who comes here looking for the same thing we were. The top row is positive, and the bottom row is negative.)
  • 12:26, 1 August 2023 172.56.232.126 talk posted a new comment on P165 (I'm referring to the P165-B heat sink.)
  • 12:26, 1 August 2023 172.56.232.126 talk posted a new comment on P165 (There are holes drilled to mount a 25 mm fan. What type of screw should I use for those holes?)
  • 23:22, 31 July 2023 Harry talk contribs posted a new comment on X306 (The USB port of the X306 is a downstream port, which is the same as the USB port of a computer. It can be connected to a mouse, keyboard, and USB disk. Let's take an example, your computer's USB is connected to your laptop, and what do you wish you could do? Do you want to be able to visit the hard disk of the laptop on the computer? Of course, this is not supported.)
  • 23:17, 31 July 2023 Harry talk contribs posted a new comment on X708 (Please provice more details via email to support@geekworm.com)
  • 23:17, 31 July 2023 Harry talk contribs posted a new comment on X708 (Please provice more details via email to support@geekworm.com)
  • 23:10, 31 July 2023 156.245.136.101 talk posted a new comment on X735-script (sudo cp -f ./x735-softsd.sh /usr/local/bin/ Do you sure that you run this line command? You should run '''x735off''' NOT '''x735-softsd.sh''', or you can run '''sudo x735-softsd.sh''' Please read the tutorial carefully.)
  • 12:27, 31 July 2023 Walker talk contribs posted a new comment on X729 (Hello, at present, X729 still uses 6-24 power adapter with DC5521 jack, if there is a plan to use USB-C 5V input in the future, we will update the information in time)
  • 12:18, 31 July 2023 Walker talk contribs posted a new comment on X825 V2.0 (YES,LED blue indicator indicates drive status)
  • 01:39, 31 July 2023 95.42.221.169 talk posted a new comment on X729 (I like the fact that the X729 combines 18650 holder and fan in this flat package that is compattible with both Pi3 and Pi4. But is there a planned model/revision that has USB-C 5V input similar to the X708/x735?)
  • 06:21, 30 July 2023 24.194.131.167 talk posted a new comment on X735-script (After I type x735off I get sudo: /usr/local/bin/x735-softsd.sh: command not found If I navigate to /usr/local/bin/ and type x735-softsd.sh I get a few permission denied errors.)
  • 13:25, 29 July 2023 23.241.179.84 talk posted a new comment on X825 V2.0 (If the Blue HDD light does not come on, does that mean that my HDD did not connect properly?)
  • 23:43, 27 July 2023 175.116.49.141 talk posted a new comment on X708 (4p power switch connected to x708 board and in use. It keeps trying to reboot repeatedly even when the power is weak when the power is turned on. Is there a way to stop trying to reboot when the battery is low power?)
  • 19:22, 27 July 2023 85.158.3.165 talk posted a new comment on X306 (I am having the same issue, no data on the usb ports, it just turn it on but no data, I cannot see the hub on lsusb, I can see this is a known issue a lot of post here with the same issue...)
  • 10:24, 27 July 2023 Walker talk contribs posted a new comment on X306 (Hello, 4 blue LEDs on the X306 board indicate battery charging and discharging levels of 25%, 50%, 75% and 100%, read the battery voltage through the Raspberry Pi, we have not tested it, it should not be possible)
  • 10:13, 27 July 2023 Walker talk contribs posted a new comment on X-UPS1 (You can refer to the size chart here: 500px|none|X-UPS1-size)
  • 10:13, 27 July 2023 Walker talk contribs deleted comment #3855 on X-UPS1
  • 10:11, 27 July 2023 Walker talk contribs posted a new comment on X-UPS1 (You can refer to the size chart here: 500px|none|X-UPS1-size)
  • 10:08, 27 July 2023 Walker talk contribs deleted comment #3854 on X-UPS1
  • 10:07, 27 July 2023 Walker talk contribs posted a new comment on X-UPS1 (You can see the size chart here: File:X-ups1-acce-size.jpg)
  • 05:06, 27 July 2023 140.99.188.38 talk posted a new comment on X-UPS1 (Can you PLEASE just post the physical dimensions. The DXF file does not self-calibrate. It's really weird you don't just have the dimensions on the product description.)
  • 20:24, 26 July 2023 37.201.195.60 talk posted a new comment on X306 (Hi, is it possible to read the battery voltage using the Raspberry Pi?)
  • 19:48, 26 July 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, Refer to How to Configure RAID Setting, and we rewrite this guide today. Please strictly follow the steps of the above tutorial. Please send us the result of '''lsusb''' and '''lsblk''' command if you still get some errors.)
  • 19:48, 26 July 2023 Harry talk contribs deleted comment #3850 on NASPi Gemini 2.5
  • 19:48, 26 July 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, Refer to How to Configure RAID Setting, and we rewrite this guide today. Please strictly follow the steps of the above tutorial. Please send us the result of '''lsusb''' and '''lsblk''' command if you still get some errors.)
  • 19:45, 26 July 2023 Harry talk contribs deleted comment #3849 on NASPi Gemini 2.5
  • 19:45, 26 July 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, Refer to How to Configure RAID Setting, and we rewrite this guide today.)
  • 16:29, 26 July 2023 Walker talk contribs deleted comment #3848 on NASPi Gemini 2.5
  • 16:29, 26 July 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Features)
  • 11:10, 26 July 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (It is recommended that you re-select the RAID1 mode after replacing the faulty disk)
  • 10:51, 26 July 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Although X630-A3 currently includes I2S Audio. But PiKVM OS does not support I2S, if PiKVM OS supports I2S in the future. We will also provide this line in the packing list later)
  • 23:38, 25 July 2023 Harry talk contribs posted a new comment on PiKVM-A8 (You are welcome ^_^)
  • 21:06, 25 July 2023 219.165.222.129 talk posted a new comment on PiKVM-A8 (Harry, thanks for your reply. I was writing vaguely. I was understanding the polarity of the LEDs on the case. I couldn't figure out which pin of the "TO PANEL" connector on the X630-A8 board should have positive polarity. But it resolved. I looked at the packing list. The polarity was written on the silk on the side that was hidden after assembly. Thank you.)
  • 19:05, 25 July 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Hi, the RTC clip is different with ofical pikvm. <pre> rw sudo nano /boot/config.txt #Then change the line: dtoverlay=i2c-rtc,pcf8563 to dtoverlay=i2c-rtc,ds1307 #Test RTC #Display the current time of the Raspberry Pi date #Write the time of Raspberry Pi to DS1307 reboot before next step sudo hwclock -w #Read the time of DS1307 sudo hwclock -r ro </pre>)
  • 18:42, 25 July 2023 Harry talk contribs posted a new comment on PiKVM-A8 (What is the polarity of the "TO PANEL" connector? Answer: The end of the cable from the PANEL will have an identifier Is the pin on the side closest to the board positive or negative? Answer: This depends on your computer motherboard, please refer to your motherboard manual, you can find your motherboard manual on the Internet)
  • 18:37, 25 July 2023 Abby talk contribs posted a new comment on NASPi CM4-M2 (Hi, Please refer to: https://wiki.geekworm.com/File:X515-IMG-5896-6Pin-Headers.jpg Regards, Abby / Geekworm)
  • 18:35, 25 July 2023 37.30.12.1 talk posted a new comment on NASPi Gemini 2.5 (I've got disk failure in RAID1 and I know which disk to replace. Do I have to do something else except of replacing failed disk or the RAID1 will restore itself automatically?)
  • 15:51, 25 July 2023 Harry talk contribs posted a new comment on XScript (Hi, New add #Uninstall secton. But I still recommend you to use the new script. The higher temperature may just be your illusion.)
  • 16:15, 24 July 2023 Harry talk contribs deleted comment #2900 on NASPi Gemini 2.5
  • 16:14, 24 July 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (Refer to How to enable OLED display)
  • 16:12, 24 July 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, we updated the installation script: XScript)
  • 16:12, 22 July 2023 89.0.119.63 talk posted a new comment on XScript (Hi, how to uninstall this X-Script? Because the temperature now is higher than with the older X-C1-script I used before. Thanks! Achim)
  • 13:52, 22 July 2023 219.165.222.129 talk posted a new comment on PiKVM-A8 (Hello, What is the polarity of the "TO PANEL" connector? Is the pin on the side closest to the board positive or negative? Sorry if I missed the description. Thanks in advance.) Tags: Mobile web edit, Mobile edit
  • 11:26, 22 July 2023 99.51.191.9 talk posted a new comment on PiKVM-A3 (Audio isn't working. Is the I2S cable released? How can I get one?)
  • 01:21, 22 July 2023 89.205.128.94 talk posted a new comment on NASPi CM4-M2 (i would laso like to know if it is possible to power the nass intrrnally so i can have my own 5v supply which i will use to powersome pcie peripherals) Tags: Mobile web edit, Mobile edit
  • 01:11, 22 July 2023 89.205.128.94 talk posted a new comment on NASPi CM4-M2 (I would like to know what the 6 pin header next to the front usb port does. I was guesing/hoping it was for i2c spi and/or uart but i couldnt find anything about it. If this is the case i would also like to know what the pinout of this header is.) Tags: Mobile web edit, Mobile edit
  • 16:44, 19 July 2023 37.170.87.133 talk posted a new comment on X708 (Hi, in the python battery code : def readVoltage(self): address = 0x36 read = self._bus.read_word_data(address, 2) swapped = struct.unpack("<H", struct.pack(">H", read))[0] self.voltage = swapped * 1.25 / 1000 / 16 return self.voltage def readCapacity(self): address = 0x36 read = self._bus.read_word_data(address, 4) swapped = struct.unpack("<H", struct.pack(">H", read))[0] self.capacity = swapped / 256 if...)
  • 09:33, 19 July 2023 159.196.171.123 talk posted a new comment on X-C1 Software (Question: The fan isn't running, likely it's not hot enough, how can I test it is working correctly without waiting until it is hot enough?)
  • 04:46, 19 July 2023 93.81.26.252 talk posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (good manual, tnxalot)
  • 17:36, 17 July 2023 Walker talk contribs posted a new comment on X950 software (Hello, may I ask what problem you encountered? Can you provide your order number? The information on the webpage is of course useful. If you encounter a problem that cannot be solved, you can send an email to us (support@geekworm.com), and you can describe your problem in detail. It is of course best if you can provide a video. We will also try our best to solve the problem for you)
  • 17:28, 17 July 2023 Walker talk contribs posted a new comment on 2.4G wireless Gamepad (Hello, we have stopped selling this product for a long time, and the information of this product is no longer available)
  • 17:19, 17 July 2023 Walker talk contribs posted a new comment on PiKVM-A8 (Hello, we don't know what kind of interface inside the Asus motherboard, this may be related to the type of computer)
  • 16:57, 17 July 2023 Walker talk contribs posted a new comment on X-C1 Software (Hello, we have not tested Home As sistant OS, only some other systems have been tested, you can browse here for details: https://wiki.geekworm.com/XScript)
  • 16:51, 17 July 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, we have updated the RTC instructions. For details, you can check How to enable RTC in the FAQ. Can you try it and see if it works? If it still doesn't work, you can send email to us (support@geekworm.com))
  • 16:32, 17 July 2023 176.126.228.179 talk posted a new comment on X950 software (Would it have been useful to include a link to this webpage on the included paperwork? Even the video on the website - the info doesnt work.)
  • 14:47, 17 July 2023 67.187.26.120 talk posted a new comment on PiKVM-A3 (I tried the RTC instructions above but they didn't seem to work. Please help. [root@pikvm kvmd-webterm]# rw [kvmd-webterm@pikvm ~]$ grep Clock -A 2 /boot/config.txt # Clock #dtoverlay=i2c-rtc,pcf8563 dtoverlay=i2c-rtc,ds1307 [root@pikvm kvmd-webterm]# date Mon Jul 17 09:42:47 MSK 2023 [root@pikvm kvmd-webterm]# hwclock -w hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method.)
  • 04:46, 16 July 2023 174.170.237.57 talk posted a new comment on X306 (Is there a way to interface with the UPS from Linux on the raspberry pi? I would like to use NUT to automatically shutdown the system when the battery reaches a certain percentage)
  • 22:59, 14 July 2023 82.123.46.36 talk posted a new comment on X-C1 Software (Doesn't work under Home Assistant OS on a Raspberry Pi... fan running at fuul speed ans thus very noisy.)
  • 11:09, 14 July 2023 138.199.54.40 talk posted a new comment on PiKVM-A8 (Hello, In your example with the Asus motherboard the connections with the power switch and the reset switch are reversed. Why?)
  • 03:50, 14 July 2023 94.203.203.100 talk posted a new comment on 2.4G wireless Gamepad (hello, Can I outreach the main company that produces these Kind of gamepads ?) Tags: Mobile web edit, Mobile edit
  • 11:08, 12 July 2023 72.90.255.109 talk posted a new comment on X306 (Hi, I'm also having the same problem with the USB ports, none of them are working. They are powering things, but no data goes through. I have confirmed the pogo pins are making contact, and have tried using a USB hub on the pi alone, without the UPS, and the hub works fine, so there's something wrong with this UPS. Does it need a ferrite ring? Would love to solve this issue! Thanks, Evan)
  • 11:38, 11 July 2023 Walker talk contribs posted a new comment on P88 (Hello, the 2.5 mm thick thermal pad will be very soft after tearing off the surface film, you can squeeze it, it will be in contact with the shell, and then the heat dissipation effect will be better)
  • 11:20, 11 July 2023 Walker talk contribs posted a new comment on PiKVM (you can refer to this https://wiki.geekworm.com/PiKVM-A4#FAQ)
  • 11:18, 11 July 2023 Walker talk contribs deleted comment #3814 on PiKVM
  • 11:18, 11 July 2023 Walker talk contribs posted a new comment on PiKVM ({PiKVM-A4#FAQ})
  • 11:08, 11 July 2023 Walker talk contribs posted a new comment on X728-hardware (Hello, we have not tested X728 and PI4 and Mini ATX PSU II assembled together, this may need to be tried by yourself)
  • 10:42, 11 July 2023 Walker talk contribs posted a new comment on X703 (Thank you very much, when using the power supply or battery, we must pay attention to the relevant precautions)
  • 10:28, 11 July 2023 Walker talk contribs posted a new comment on N508 (Thank you for your suggestion, but our current fan design is directly plugged into the GPIO)
  • 10:10, 11 July 2023 Walker talk contribs posted a new comment on PiKVM-A3 (The fan of X630-A3 does not support speed adjustment)
  • 21:47, 9 July 2023 62.212.95.35 talk posted a new comment on NASPi Gemini 2.5 (How exactly does the power button work? It seems that gpio pin 4 does not immediately correspond to button presses (edge raising & falling) as it seems to be buffered to facilitate the long press hard shutdown? Is there maybe a schema how the power button, pin 4 and the power led work together?)
  • 05:55, 9 July 2023 81.143.10.214 talk posted a new comment on P88 (The 2.5mm thick thermal pad was too thick to fit in position A _ the 1mm pad fitted fine and was in contact with the chip and the case.)
  • 00:59, 9 July 2023 75.74.77.189 talk posted a new comment on X450/X5500 Software Configuration (Hello, I selected iqaudio-DAC for the piCore Player but it does not work. When I do aplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1:...)
  • 15:57, 7 July 2023 91.65.17.105 talk posted a new comment on X715 (Can you please provide example for how to use X715 together with X728 (UPS) to achieve 6~60V wide voltage input. I see two options: 1. Stack Raspberry, X715 & X728. - Power in to X715. X715 will power Raspberry directly. - Power cable from X715 to X728. For X728 to charge batteries. 2. Stack Raspberry & X728. X715 separate. - Power in to X715. Fan function not usable as it is not stacked on Raspberry. - Power cable from X715 to X728. X728 charge batteries and provide power to Raspb...)
  • 18:47, 5 July 2023 81.97.209.55 talk posted a new comment on PiKVM (the generic pi2w image is missing i2c-dev & turning it on so add them. -------- cd /etc/modules-load.d/ more kvmd.conf rw nano kvmd.conf dwc2 libcomposite tc358743 i2c-dev cd /boot nano config.txt dtparam=i2c_arm=on systemctl enable --now kvmd-oled kvmd-oled-reboot kvmd-oled-shutdown ro reboot ---------)
  • 16:48, 5 July 2023 81.97.209.55 talk posted a new comment on PiKVM (I just want to know how to make the PiKVM-A4 LCD display work where are the geekworm scrips to do that)
  • 22:46, 3 July 2023 103.43.78.119 talk posted a new comment on Raspi UPS HAT Board (it seems if you short out power switch and dual power connected then it works the way ups does, soon as power is applied battery get charge and pi is up and running then power goes out pi continue running on battery until battery dies, add voltage divider for 5v input power to any GPIO pin to detect power outage. it works the way my needs.)
  • 10:49, 3 July 2023 68.51.90.40 talk posted a new comment on X728-hardware (I just purchased the Mini ATX PSU II - Desktop ATX Power Supply raspberry pi HAT. I currently have the X728 V2.3 on my Pi 4B. How do I stack these units together so I can use ATX power and fallback to the X728 when ATX loses power? I expect maybe needing to do some coding to make them work together software side, but will I be able to use this combination as expected?)
  • 15:37, 1 July 2023 175.116.49.141 talk posted a new comment on X708-Software (x708, x862 (NGFF, WD SA510), two 18650 batteries, and a metal pushbutton switch latching are in use. 1. If this package device is left unused, the battery will be completely discharged. The power switch does not operate when the adapter is connected to the x802 boarder. So when I remove the power cord of the battery holder from the x708 boarder and reconnect it, it charges and works. However, the software does not boot. A Linux file system error and a disk error of M.2 NGFF on this x862 bo...)
  • 19:41, 30 June 2023 77.22.139.218 talk posted a new comment on Properly Mount USB Storage on Raspberry Pi (There is an automounting issue using the AON funtion on the board. I am currently working on this issue to figure out what is the problem.)
  • 18:29, 29 June 2023 Walker talk contribs posted a new comment on P165 (Hello, the metal casing may have a little impact on the WIFI signal, but it will not be very big, and the situation you mentioned should not happen)
  • 12:26, 29 June 2023 148.75.141.239 talk posted a new comment on X703 (Definitely heed the warnings about using the USB-C input on the PI or changing headers while plugged in or having batteries in it. One of mine started smoking immediately. Pull the batteries and everything seems ok now. Just set it up and don't touch it after. Get your pi setup first and add this last.)
  • 11:00, 29 June 2023 73.137.100.242 talk posted a new comment on N508 (Why wasn't the fan designed to take advantage of the 5V fan header adjacent to the RTC Connector?)
  • 05:49, 28 June 2023 74.104.125.221 talk posted a new comment on 3.5 LCD B (1.is it possible to get rid of the lag on the display. This lag is not present on the monitor mirroring the display. 2. how do I solve the issue of the raspbian GUi being cut off)
  • 00:08, 28 June 2023 184.177.166.35 talk posted a new comment on PiKVM-A3 (Can I control the rotation speed of the Fan by X630-A3 or Raspberry Pi 4? It is too noisy now and I want it to be OFF or low speed when temperature is low.)
  • 00:07, 28 June 2023 184.177.166.35 talk posted a new comment on PiKVM-A3 (Ca i control the rotation speed of the Fan by X630-A3 or Raspberry Pi 4? It is too noisy now and i want it to be off or low speed when temperature is low.)
  • 00:50, 27 June 2023 62.99.24.149 talk posted a new comment on P165 (Hi. I spreaded thermal grease evenly on processor, ram and usb chips. I see you put a lot of it! I have some trouble with wifi on Libreelec distro. In the same room as router it randomly loses connection. Is there interference with bluetooth? Is it possible that the case blocks the wifi antenna and lose a bit of signal?)
  • 18:08, 26 June 2023 Harry talk contribs posted a new comment on X680 ('''A note about this kit listing:''' *1. X630-A5 is only suitable for devices with ATX CONTROL such as desktops, servers, etc. *2. If you are using a device that supports ATX CONTROL, we recommend that you purchase X630-A5 and network cable kit; *3. X630-A5 is installed inside the ATX CONTROL device, one X630-A5 only supports one device; X680 supports simultaneous control of 4 devices *4. ATX CONTROL can support remote startup, shutdown, restart and other functions *5. You need to buy the ap...)
  • 18:07, 26 June 2023 Harry talk contribs deleted comment #3791 on X680
  • 17:19, 26 June 2023 Harry talk contribs deleted comment #3790 on X680
  • 17:15, 26 June 2023 Harry talk contribs posted a new comment on X680 (Thansk for your advise. We will add X630-A5 anc ATX cable. 800px)
  • 16:21, 26 June 2023 Harry talk contribs posted a new comment on X680 (You are right, you need to bring your own network cable (568B) and X630-A5)
  • 12:27, 26 June 2023 Walker talk contribs posted a new comment on X732 (Hello, Button Switch has been marked on the picture on the right side of the WIKI page)
  • 06:37, 26 June 2023 104.184.113.47 talk posted a new comment on X680 (I am also interested in the pinout for the RJ45 ATX power control)
  • 16:22, 24 June 2023 193.56.104.165 talk posted a new comment on X732 (where will get the power button)
  • 18:31, 21 June 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, it is not a PWM fan, this fan is directly connected to the board of X630-A3)
  • 18:22, 21 June 2023 Walker talk contribs posted a new comment on PiKVM (Does not support V4, only supports V3)
  • 18:14, 21 June 2023 Walker talk contribs posted a new comment on 3.5 LCD B (thanks for your advice)
  • 06:30, 21 June 2023 163.114.132.6 talk posted a new comment on PiKVM-A3 (Is Fan is PWM controlled by some GPIO? (GPIO12) Or it us just connected to +5V directly?)
  • 04:54, 21 June 2023 85.216.54.101 talk posted a new comment on PiKVM (I just came across your product: you seem to support PiKVM V3 platform only? Is there support for V4 also?)
  • 22:47, 20 June 2023 130.209.204.234 talk posted a new comment on X728-Software (Hello, is there a way to power off x728 by pulling one of the GPIOs high or low? Thanks.)
  • 07:27, 20 June 2023 76.79.164.20 talk posted a new comment on 3.5 LCD B (It would be nice to be able to toggle quickly between HDMI and 3.5" screen. As it is, running ./LCD35-show runs a long script requiring download of files, etc. It would be nice if LCD35-show would detect if it had already been run and just quickly reconfigure. But then, it would be nice if a reboot wasn't necessary too.)
  • 06:28, 20 June 2023 76.79.164.20 talk posted a new comment on 3.5 LCD B (Just set the system up and in my case the HDMI output is not disabled as indicated in the sentence above just before the FAQ section. It mirrors the content of the LCD display.)
  • 06:27, 20 June 2023 79.214.241.144 talk posted a new comment on X306 (Hi, What about the jumper? I guess if I want to use power switch I have to set it next and in parallel to the USB-Port?) Tags: Mobile web edit, Mobile edit
  • 17:00, 19 June 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hi, PIKVM-A3 needs to be connected to Raspberry Pi 4)
  • 16:57, 19 June 2023 Walker talk contribs posted a new comment on P165 (Hello, it cannot be powered directly by USB. The interface of the fan is 2pin. It needs to be connected to the GPIO of the Raspberry Pi.)
  • 16:52, 19 June 2023 Walker talk contribs posted a new comment on N300 (the dimensions between holes for pads : 7.7*5cm)
  • 16:47, 19 June 2023 Walker talk contribs posted a new comment on Armor Case B (Hello, the size of this fan is 25*25*7mm, our store currently does not sell fans individually)
  • 16:39, 19 June 2023 Walker talk contribs posted a new comment on X635 (You can refer to this :https://wiki.geekworm.com/PD3005G-3A)
  • 16:38, 19 June 2023 Walker talk contribs deleted comment #3772 on X635
  • 16:38, 19 June 2023 Walker talk contribs posted a new comment on X635 (You can refer to this 【PD3005G-3A】)
  • 16:34, 19 June 2023 Walker talk contribs posted a new comment on Raspberry pi 4 can't find 5ghz wifi (You're welcome)
  • 02:30, 18 June 2023 76.106.40.190 talk posted a new comment on X-C1 Software (Hello, would this fan script work to control the 3-pin version of the Noctua NF-A4x10 5V fan?)
  • 01:08, 17 June 2023 97.126.31.135 talk posted a new comment on X680 (> "four RJ45 ports for ATX power control" This kit does not come with the ATX power control cables... So what is the pinout for the RJ45s if I want to build my own?)
  • 10:03, 16 June 2023 79.184.56.240 talk posted a new comment on P165 (Is it possible to power the fan from the USB port? Could you publish the correct wiring?)
  • 18:41, 15 June 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hello, the built-in fan of NASPi Gemini is a PWM 4010 fan. If you find it noisy, you can lower the fan speed. Of course, you can also buy a fan with better quietness. Of course, if you don’t want to install a fan, you can You can use a heat sink with strong heat dissipation, but pay attention to the height between the Raspberry Pi and the shell,)
  • 18:31, 15 June 2023 Walker talk contribs posted a new comment on Raspberry Pi 4 Model B (thanks for your advice)
  • 15:53, 15 June 2023 134.238.128.187 talk posted a new comment on N300 (Hi, can you please provide the dimensions between holes for pads?)
  • 11:39, 14 June 2023 Harry talk contribs posted a new comment on How to enable I2C (This tutorial has been very clear, but raspberry pi OS is constantly updated, so there will be small differences on the latest version. what should we do?)
  • 01:56, 12 June 2023 176.144.226.33 talk posted a new comment on PiKVM-A3 (Is it possible to connect to the kvm from an android smartphone?)
  • 19:18, 11 June 2023 80.224.195.190 talk posted a new comment on Armor Case B (Hi, I'm a owner of this case, and one year later, fans started to do some annoying noise, and I need to replace them. Where I can find others fans with the same specs?)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"