N508

N508-V3 Orange Pi 5 Plus Case

N508-V3 Packing List

N508 heat sink

How to Connect Fan

N508-V2 Orange Pi 5 Plus Case

N508-V2 Orange Pi 5 Plus Case

N508-V1 Orange Pi 5 Plus Case

N508-V1 Orange Pi 5 Plus Case

N508-V1 Orange Pi 5 Plus Case

N508-V1 Orange Pi 5 Plus Case

Orange Pi 5 Plus with snap-on radiator

Updation

• On January 8th, 2024, N508-V2 is updated to N508-V3.

The height of the case has been reduced from 43.8mm to 37.8mm, as the snap-on radiator has been replaced with aluminium heatsink with a maximum height of 10mm.

• On August 1st 2023, N508-V1 is updated to N508-V2.

N508-V1 does not reserve the antennas holes; N508-V2 reserves 2 antenna holes, also solved the problem of inaccurate hole position of N508-V1.

Overview

This is the Orange Pi 5 Plus metal case which compatible with Orange Pi 5 Plus 4GB/8GB/16GB, the model is N508. It reserves all the interfaces for the Orange Pi 5 Plus motherboard. For good heat dissipation, it can use 4010 5V active cooling fan and a 10mm passive aluminum heatsink at the same time.

Model	Material	Compatible with	NVMe SSD Support
N515	Iron	Orange Pi 5 Pro / Orange Pi 5 Max	Yes, support to mount 2280 length SSD inside the case for Orange Pi 5 Pro
N510	Iron	Orange Pi 3B v1.1 only, NOT Orange Pi 3B v2.1	Yes.
N508	Iron	Orange Pi 5 Plus	Yes.
N507	Aluminum Alloy	Orange Pi 5/5B	Yes, BUT NOT support to fix 2280 SSD to Case.
N506	Iron	Orange Pi 5/5B	Yes, support to mount 2280 length SSD inside the case for Orange Pi 5.
N505	Iron	Orange Pi 5/5B	Yes, BUT NOT support to fix 2280 SSD to Case.
N502	Iron	Orange Pi Zero 3	No.
N500	Iron	Orange Pi Zero 2	No.

Features

• Model: N508
• Compatible with Orange Pi 5 Plus 4GB/8GB/16GB
• High quality metal material with surface galvanized process
• All ports and slots of the case can match with Orange Pi 5 Plus
• Equipped with 5V 4010 cooling fan for active cooling
• With a 10mm thickness aluminum heatsink for passive cooling
• Case Dimensions:108*80.8*43.8 mm/ 4.25*3.18*1.72inch
• With 75mm distance mounting hole, you can hang it on the wall or somewhere you want.

Packing List

• 1x N508 metal case for orange pi 5 plus
• 1x 4010 5V cooling fan
• 1x 10mm aluminum heatsink
• 1x Screws Pack

User Manual

Please pay attenttion!!!

Installation Steps

Installation Video

Geekworm N508 Installation Guide: https://youtu.be/LkfAG6QMKko

Geekworm Orange Pi 5 Plus Heatsink Installation Guide: https://youtu.be/fUrbUVHNIck

Thanks for the video from leepspvideo! https://youtu.be/CfIWyWxPaC0

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

3 months ago

Score 0

I've managed to fit 1mm copper SSD heatsink, but it leaves no room for the mounting holes, so the case can't be hung and the heatsink makes the case bent a little out. When the SSD is loaded, the heatsink gets really hot. What SSD heatsink model is supposed to be used with this case?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

3 months ago

Score 0

Hi,Sorry, there is no space for a heatsink of the SSD in the case.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

6 months ago

Score 0

Another big problem of the case is that the antenna holes are not in the base, but on the lid. The antenna cords cannot be easily detached and they are short and fragile. It makes it difficult to disassemble the case and keep it with the detached lid. Would be nice to see the holes on the other side in the next version of the case.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

6 months ago

Score 0

I would suggest not moving the holes, but make this side part of the base and the opposite side part of the lid.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

7 months ago

Score 0

How much room does it have for SSD heatsink?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

7 months ago

Score 0

Hello,The copper spacers fixing the bottom of motherboard are M2.5*7+6, so the height from the motherboard to the bottom of the case is 7mm. Theoretically, the thickness of SSD+Heatsink cannot exceed 7mm.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

6 months ago

Score 0

It is only 1.5mm between the SSD and the case bottom side. With 0.5mm thermal pads it gives only about 1mm room which is technically not enough to fit in anything. The only way to avoid SSD overheating is to significantly low down the rates. Hopefully it will be better designed in the next version of the case.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

18 months ago

Score 0

Why wasn't the fan designed to take advantage of the 5V fan header adjacent to the RTC Connector?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Walker

17 months ago

Score 0

Thank you for your suggestion, but our current fan design is directly plugged into the GPIO

Permalink