X450/X5500 Software Configuration

From Geekworm Wiki
Jump to navigation Jump to search

Raspbian Stretch

The following operation is in the config.txt file

REMOVE THE DRIVER FOR THE ONBOARD SOUND

sudo nano /boot/config.txt 

#Remove the line or add the '#' at the begin of this line;
#dtparam=audio=on

CONFIGURE DEVICE TREE OVERLAY FILE

#Add the following line at the end of config.txt file;
dtoverlay=hifiberry-dac

#Save config.txt file(Ctrl-x then Y), then reboot raspberry pi
sudo reboot

Volumio (Version: 2.118)

Select the“PLAYBACK OPTIONS”menu, Turn on "I2S DAC" and select "Hifiberry DAC" under“DAC Model.” Then reboot and you are done.

Volumio

Moode Audio Player (Version: 3.1)

Simply select the“Configure”menu, select "Audio" under "configuration settings", then select "HiFiBerry DAC" under “I2S audio device", Finally click “SET”and reboot.

Moode

OSMC (Version: 20170210)

1. Select My OSMC and enter "Pi Config".

OSMC-1

2. Select "Hardware Support" and choose your "hifiberry-dac-overlay" in the Soundcard Overlay parameter.

OSMC-2

3. Restart your Raspberry Pi.

OSMC-3

4. Select "Settings".

OSMC-4

5. Select "System".

OSMC-5

6. Select "Audio output" and set the Audio output device parameter to ALSA: Default (snd_rpi_hifiberry_dac Analog)

OSMC-6

7. Done!

Picoreplayer

for the picoreplayer the correct hardware is the Audiophonics ISabre Q2M

hw:CARD=DAC,DEV=0 - I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0

Thanks to Ignace Sannen


Return to X5500 X450

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #2

15 months ago
Score 0++

Hello, I selected iqaudio-DAC for the piCore Player but it does not work. When I do aplay -l

        • List of PLAYBACK Hardware Devices ****

card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3

The X450 is not listed. And the error log is below

[12:51:06.827281] stream_init:454 init stream [12:51:06.837874] output_init_alsa:936 init output [12:51:06.838013] output_init_alsa:976 requested alsa_buffer: 80 alsa_period: 4 format: any mmap: 1 [12:51:06.843483] ALSA _snd_pcm_hw_open:1829 Invalid value for card [12:51:06.843553] test_open:281 playback open error: No such device

[12:51:06.843585] output_init_common:401 unable to open output device: hw:CARD=IQaudIODAC

Harry

14 months ago
Score 0++
for the picoreplayer the correct hardware is the Audiophonics ISabre Q2M

Anonymous user #1

29 months ago
Score 0++

hi, what are the settings in PicorePlayer?

Thx!

Lisa

29 months ago
Score 0++

Hi,

Q:Which DAC model do I set with piCoreplayer?

A:Plase choose the iqaudio-DAC .