Comments log

This is a log of comments.

(newest | oldest) View (newer 250 | older 250) (20 | 50 | 100 | 250 | 500)

14:43, 26 February 2024 Harry talk contribs posted a new comment on X728 (There may be those who prefer the old ways)
14:41, 26 February 2024 Harry talk contribs posted a new comment on X876 (X876 is not compatible with PI 5. You can refer to X1001)
00:19, 26 February 2024 73.176.32.190 talk posted a new comment on X1002 (I had to drill out the holes in the standoffs on the board to get the screws through the raspi and the X1002...used the brass nuts to secure the screws on the X1002 side. Worked and X1002 functions.)
12:33, 23 February 2024 45.46.196.207 talk posted a new comment on X729 (One of the features is "Measure both output voltage and current draw over I2C with high precision". Could you provide sample?)
16:49, 22 February 2024 103.193.138.118 talk posted a new comment on X1201 (What happens if power is applied to the USB-C of the Raspi? Documentation says not to do it, but what happens if you do anyway? I'd like to use the USB-C port as a device port, but not if there's a risk I'll burn out the X1201 or the Pi if I plug the wrong thing in...)
08:38, 22 February 2024 110.93.11.249 talk posted a new comment on P580 (Purchased the X1002 NVMe bottom board shield and the compatible P580 case. The case is okay, but there is no button for the RPi5's on off button, just a cutaway on the case. This means that I will have to insert an object into the cutaway to reach to button, which is a few mm back from the outside wall of the case. Geekworm, a simple button would make the case a lot nicer. Other than that, no complaints.)
19:51, 20 February 2024 91.90.116.8 talk posted a new comment on LVDS Adapter (Hello, I have two video inputs that I need to swith and send to LCD. I want to use hdmi switch 2 in 1 out. The problem is that one inpout is going via HDMI, second is LVDS RGB 1ch 6-bit. Is it possible to convert my LVDS to HDMI with your board?)
17:59, 20 February 2024 139.30.157.71 talk posted a new comment on X728 (How about someone replaces the Links to X728-Software to X728-script, which actually works and is maintained.)
02:49, 20 February 2024 65.33.163.151 talk posted a new comment on X876 (Are the X876 pogo pins compatible with the RPi 5B. Dave)
08:02, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
07:34, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
00:54, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (16.54 i mean(rpi is 1mm height))
00:53, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (after a quick check(don't wanna disassemble it), the total height with rpi installed is 25.54mm(w/ 0.02mm precision) approximately, the lower plate is 8mm, so i guess the upper plate is 17.54mm)
15:51, 17 February 2024 45.46.196.207 talk posted a new comment on X729 (any problems with using it on a raspberry pi 5?)
08:20, 17 February 2024 50.52.101.217 talk posted a new comment on X1003 (Using a solidigm P41 plus 2230 1TB drive. Typing this comment with it as the boot drive on my Raspberry Pi 5. Followed directions on the wiki here. Had to reboot twice before it worked. Very fast.)
01:16, 16 February 2024 98.195.211.0 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I used a hot air station to unsolder and solder it into place)
11:27, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (Got my X1003 working with my rpi5 using a "with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD", and cloned the boot microSD to it using my Gerling's rpi-clone script. The RPI5 doesn't want to boot from the NVMe even tho the 6 was added to the boot order line in the eeprom and the PCIE_PROBE=1 is in ther.)
10:14, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (UPDATE!! RETURNED the KINGSPEC nvme. It was making it so that the X1003 had NO LIGHTS illuminated. Replaced it with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD from amazon [WORKS even tho it has Phison E19 controller]. It arrived today, i put it in the X1003 and i had lights. I added the 6 to the end of the boot order in the eeprom. Device showed up. I ran the rpi-clone script (geerling's from his git). It went through all the glorious cloning motions. Now i'm just working on getting the rpi...)
04:33, 15 February 2024 74.203.198.222 talk posted a new comment on X1003 (CL1-3D128-Q11 NVMe SSSTC 128GB is working great, although it is small. Never seen a pi run so fast.)
02:58, 15 February 2024 188.77.122.153 talk posted a new comment on X1003 (Yo he probado con un KingSpec M.2 NVMe 512 GB 2242 y reconoce la unidad, las luces permanecen encendidas, copia la SD al SSD sin problemas, pero luego no arranca desde el PCIe. ¿alguna solución?)
03:18, 14 February 2024 77.136.66.21 talk posted a new comment on X1003 (Works well with SSD SK Hynix BC711 512go 2242) Tags: Mobile web edit, Mobile edit
19:56, 13 February 2024 207.173.135.189 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 ([SOLVED] Errors booting from NVME with X1002 base and Crucial T500 Gen4 NVMe. Symptoms: Either: 1. *Extremely long* boot times (~240 seconds) with pcieport and nvme errors in dmesg including: [ 4.230345] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 4.230359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 4.230362] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 [ 4.230366...)
13:48, 12 February 2024 175.143.167.98 talk posted a new comment on X630 (Does the X630-A2 audio board work with PiKVM V2 DIY (using X630 and X630-C1 case)? Is any additional configuration required like on PiKVM-A3 or should this just work with pikvm without additional configuration?)
13:30, 12 February 2024 45.46.196.207 talk posted a new comment on X729-Software (Is there any information and demo script on the current/voltage/power monitor data from address 40?)
10:05, 12 February 2024 76.158.60.16 talk posted a new comment on M400 (Don't purchase this product. Run This documentation is useless. They don't even show a picture of how to connect the ribbon cable.)
23:36, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Found it in the FAQ in the main page: A: The X1000 does not reserve the nut column to fix the 2230/2242/2260 SSD. Based on our test, you can secure the 2230/2242/2260 SSD using an M2*6mm screw and 2pcs M2 nuts. Place one M2 nut under the SSD, then use the M2*6mm screw and the other M2 nut to fasten the SSD.)
23:09, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Also need standoff for 2242 size ssd. It appears that the 2280 standoff is permanently mounted to the X1001.)
13:32, 11 February 2024 83.239.24.170 talk posted a new comment on X-C1 Software (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
13:32, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
13:31, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Work with debian?)
03:51, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (I mean 2230 or 2242)
03:50, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (How to fix a 2240 nvme ssh.. there is a hole but no fix for the screw)
21:31, 10 February 2024 185.228.19.78 talk posted a new comment on X1002 (Would this support the Coral M.2 Accelerator B+M key, aka Edge TPU?) Tags: Mobile web edit, Mobile edit
21:20, 10 February 2024 185.228.19.78 talk posted a new comment on PiKVM-A3 (Any plans to update the KVM-A3 case for Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
21:10, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (More specifically, an updated P165-B for rpi5?) Tags: Mobile web edit, Mobile edit
21:07, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (Any plans to release a version of this for the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
21:05, 10 February 2024 185.228.19.78 talk posted a new comment on P122 (What is the height of the top heatsink piece? And bottom heatsink piece? I assume I could use either/or?) Tags: Mobile web edit, Mobile edit
20:25, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (Same here, I get about 60MB/sec. Not what I would expect from PCIe. In my old case with USB bridge I get more than 110 MB/sec with the same drive.) Tags: Mobile web edit, Mobile edit
20:24, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (It works, but performance is awful. I have double the speed on my RPi4 in Argon40 NVME case and that is only using USB bridge and not PCIe. I'm deeply disappointed by the X1001...) Tags: Mobile web edit, Mobile edit
14:00, 10 February 2024 50.37.95.233 talk posted a new comment on X1001 Hardware (Can you please post the correct mounting screw size for 2242 ssd?) Tags: Mobile web edit, Mobile edit
12:45, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (Which Phison controller is the problem? E21 or E13? Or BOTH??)
12:33, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (does NOT work with KINGSPEC NX 2230 512GB -- this PCIe m-keyed m.2 nvme makes the lights on the X1003 go out.)
06:37, 10 February 2024 47.152.127.211 talk posted a new comment on X-UPS1 (Can you post example usage of the PH2.0 signal cable connector and the external momentary switch connector.)
05:41, 10 February 2024 108.193.152.114 talk posted a new comment on X1001 (I'm able to crimp my own JST-to-DuPont cables. Could I just power the X1001 via the GPIO pins with such a cable?)
00:44, 10 February 2024 188.250.82.104 talk posted a new comment on X882 (Hello, how can I use the power button on the board? Do I have to connect the power to the board? Because it is currently being powered by the Pi4) Tags: Mobile web edit, Mobile edit
23:13, 9 February 2024 82.220.82.107 talk posted a new comment on X1002 (Same here: those 4 standoffs have been implemented as M2. That will no longer fit the screws and / or the 4 5mm feet. In my delivery it says X1002 V1.1 - maybe te problem is in all deliveries with V1.1 ??)
07:05, 9 February 2024 98.168.105.253 talk posted a new comment on X708-A1 (Is there a drawing or 3d model for this board? I need to 3d print a custom case for it. Thanks!!)
05:24, 9 February 2024 96.88.172.9 talk posted a new comment on X630 (How long will this product be in production/be supported?)
10:52, 8 February 2024 108.238.59.28 talk posted a new comment on H508 (Can I purchase the H508 copper pad? Just need the copper pad.)
10:37, 8 February 2024 98.60.21.52 talk posted a new comment on X1002 (Just received my unit and the M2.5x10mm screws do not fit in the X1002--it seems like the integrated standoffs were tapped incorrectly. The screws fit fine in the M2.5x5mm gold standoffs. Anybody else have this issue--am I crazy? I've done many M2.5 projects.)
13:46, 7 February 2024 38.45.128.198 talk posted a new comment on X1003 (Lexar SSD Play 1TB showed up, successfully configured as the only disk and booted from it. Using test script from "Benchmark ssd on linux: How to measure the same things as crystaldiskmark does in windows" on Unix StackExchange. Results: Sequential Q32T1 Read: 407MB/s [ 12 IOPS] Sequential Q32T1 Write: 407MB/s [ 12 IOPS] 4KB Q8T8 Read: 397MB/s [ 99319 IOPS] 4KB Q8T8 Write: 394MB/s [ 98554 IOPS] 4KB Q32T1 Read: 392MB/s [ 98225 IOPS] 4KB Q32T1 Write: 367MB/s [ 91838 IOPS] 4KB...)
08:32, 6 February 2024 47.220.145.84 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (How do you change the nut from the 2242 position to the 2230 position?)
05:24, 6 February 2024 93.226.210.72 talk posted a new comment on X1003 (Transcend MTE400S 1 TB NVMe PCIe Gen3 x4 M.2 2242 (TS1TMTE400S) seems not to be compatible. First installation tests succsessfully. Image copy worked, but lot of error messages while booting. Raspi freezes after boot. Booting with an usb nvme-adapter was successfull. No errors.)
02:59, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (oha ... flushed a new eeprom and VOILA now it works :-))
02:31, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (hi from vienna, i have no luck till now withj the x1002: * first i had a WD black 770 and read that this is on the incompatible list * returned it and ordered a crucial t500 1TB nvme ssd but still there is NO reaction (no blue light, nothing reported in lspci,..) looks like the x1002 is not found / connected / or ist just plain dead * did the edits as described above in boot/config.txt * no success any advice please cheerz)
19:23, 5 February 2024 45.89.242.200 talk posted a new comment on X1004 (Will the Coral M2 card run on this current firmware?) Tags: Mobile web edit, Mobile edit
11:40, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive PCIE 2 Category Test Result HDParm Disk Read 419.51 MB/sec HDParm Cached Disk Read 412.94 MB/sec DD Disk Write 284 MB/s FIO 4k random read 106113 IOPS (424455 KB/s) FIO...)
08:17, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive also works)
04:38, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (However I do not see #36 light up. What did I miss ? -> If #36 is missed, check if all jumper pins align. -> Unscrew the screws and re-align the Pi. -> Push down on the Pi so you can feel the pogo pins bounce. -> While holding down the Pi, tighten the screws.)
03:29, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (I enabled i2c and rebooted the machine. Battery is charging. $ sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
01:42, 5 February 2024 108.238.59.28 talk posted a new comment on H508 (Yes. I want just the H508 copper pad.) Tags: Mobile web edit, Mobile edit
18:56, 4 February 2024 94.209.37.161 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (While following the instructions I noticed the following messages in dmesg: pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 pcieport 0000:00:00.0: [12] Timeout I am running the latest eeprom CURRENT: Fri 5 Jan 15:57:40 UTC 2024 (1704470260) LATEST: Fri 5 Jan 15:57:40 UTC 2024 (17044702...)
11:04, 4 February 2024 Walker talk contribs posted a new comment on H508 (Just need the H508 Copper Pad?)
07:03, 4 February 2024 172.58.102.215 talk posted a new comment on X1200 (Can Raspberry Pi 5 be powered thru the XH2.54 2-pin 5V Out connector only?)
10:37, 3 February 2024 108.238.59.28 talk posted a new comment on H508 (Where can I buy just this item?)
10:22, 3 February 2024 Walker talk contribs posted a new comment on X735-script (May I ask which version of X735 you are using?Can you provide your order number easily? You can contact us by email: '''support@geekworm.com ''')
00:10, 3 February 2024 202.184.232.23 talk posted a new comment on X735-script (Hi, I've followed through the instructions but even after keying in the command "sudo systemctl start x735-fan" the pwm fan is not turning on. Please help)
21:04, 2 February 2024 131.147.76.85 talk posted a new comment on X1003 (Did you develop it using only HV2000?)
21:03, 2 February 2024 131.147.76.85 talk posted a new comment on X1003 (It seems that gekworm does not have the recommended SSD.)
15:16, 2 February 2024 Walker talk contribs posted a new comment on P580 (Hi,The P580 will be available for sale on Amazon shortly, you can buy it on Amazon)
15:15, 2 February 2024 Walker talk contribs posted a new comment on P394 (Hi, I'm sorry for the inconvenience, the Raspberry Pi 5 motherboard is just the right size to fit in, there shouldn't be any problems, can you provide us with some pictures?)
15:11, 2 February 2024 Walker talk contribs posted a new comment on X1003 (Lexar Play 1TB NVME or HV2000 NVME SSD)
15:08, 2 February 2024 Walker talk contribs posted a new comment on X1002 (Thanks for sharing!)
14:25, 2 February 2024 162.231.24.243 talk posted a new comment on P580 (Amazon carrying P579 for HatDrive Top mount. No P580 offering on Amazon. Ordering X1002 would have liked to get the P580 as well. 10-18 days shipping from geekworm.com - unfavorable. Too much time passing means crushed or mangled product on delivery, if no delay. Rocky, aka anonymous #3)
14:03, 2 February 2024 162.231.24.243 talk posted a new comment on P580 (Amazing similarity between this and very recently assemblage of Orange Pi 5+, with Active Heatsink and, Case. It's case ID is N580. Assembly of this case with X1002 NVMe Board will be a relief,from that struggle.)
13:06, 2 February 2024 104.28.48.215 talk posted a new comment on P394 (Total crap. The 2nd layer is supposed to be sized to let the Raspberry Pi 5 board to fix inside it. It’s too narrow. I would have to file it larger in order to use this.) Tags: Mobile web edit, Mobile edit
06:15, 2 February 2024 173.52.114.153 talk posted a new comment on X1003 (what do the leds mean? i have 2 blue ones, but i cant see the nvme)
05:49, 2 February 2024 173.52.114.153 talk posted a new comment on X1003 (Can you suggest a compatible m2? apparently the one that i bought is not compatible.)
04:04, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Whoops. Replied to wrong post. But in answer to your question...Yes, the X1002 supports 3.0, though Pi doesn't officially support more than 2.0. Its a matter of trying your SSD at 3.0 and seeing if its stable. Personally, I wouldn't risk it.)
04:01, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted. Blue light now on on X1002 and drive recognised by Pi.)
04:00, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Found a solution to my XPG SSD not installing... From terminal I ran: sudo rpi-eeprom-config -e Added PCIE_PROBE=1 to the end of the file, saved file, rebooted. Blue light now on on X1002 and drive recognised by Pi.)
03:46, 2 February 2024 154.56.240.46 talk posted a new comment on X1002 (Pi nub here. Just installed one of these with an XPG SX8200 Pro 1TB SSD and it doesn't seem to work. Amended config.txt OK. What should I be seeing with lspci, or what other way can I check its installed ok?)
13:31, 1 February 2024 38.45.128.198 talk posted a new comment on X1003 (With Corsair M600 1TB: nvme0n1 showed up in my lsblk, but with a size of 1 MB. Doesn't appear to be compatible. I see now that it has a Phison E21T controller, along with almost every other SSD I can find. I'll try the Lexar Play 1TB the other commenter successfully used.)
10:08, 1 February 2024 Walker talk contribs posted a new comment on X1002 (Hi, we haven't tested this SSD, but according to buyers' feedback, the X1002 is compatible with Samsung 970 evo m.e nvme)
10:07, 1 February 2024 Walker talk contribs posted a new comment on X1001 (Thanks for sharing!)
10:05, 1 February 2024 Walker talk contribs posted a new comment on NASPi CM4-M2 (OK, thank you for your interest in our products)
10:03, 1 February 2024 Walker talk contribs posted a new comment on P580 (Hello may I ask what country you are in? It's available in the US right now, and will be available in Europe soon!)
04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Does this support PCIe 3.0?) Tags: Mobile web edit, Mobile edit
04:22, 1 February 2024 219.250.26.174 talk posted a new comment on X1002 (Samsung PM981A will work with this?) Tags: Mobile web edit, Mobile edit
22:47, 31 January 2024 69.27.21.151 talk posted a new comment on X1001 (First attempt failed. Had to use the Raspberry Pi eeprom fix and retry. Solution: Make eeprom changes after copying the OS to the SSD. First try would not boot from SD if no OS existed on SSD.)
20:47, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (It is all working now. I had inserted the SSD upside-down.)
20:32, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (By the way I am using this SATA SSD, Western Digital Blue SA510 1TB M.2 2280 SATA III SSD (WDS100T3B0B))
19:37, 31 January 2024 131.147.76.85 talk posted a new comment on X1003 (Are there any SSDs that have been tested by gekworm? I would like to know that.)
19:13, 31 January 2024 1.159.18.193 talk posted a new comment on NASPi CM4-M2 (Hi, I am using both slots with 1Tb SSDs. The NVME SSD is working but the system does not see the SATA SSD. Is there a special process to set this up? Are there cli commands to debug this? Here are a few dumps. kaza007@pinas:~ $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.1G 0 disk ├─mmcblk0p1 179:1 0 256M 0 part /boot └─mmcblk0p2 179:2 0 28.9G 0 part / mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk nvme0n1...)
15:21, 31 January 2024 172.58.208.221 talk posted a new comment on P580 (When will Amazon have this item in stock?)
11:17, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (Using a RPI 5 with Geekworm X1003 and a Lexar Play 1TB NVME m.2 SSD Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
11:13, 31 January 2024 71.121.201.60 talk posted a new comment on X1003 (With Lexar Play 1TB NVME m.2 2230 ssd: Raspberry Pi Diagnostics - version 0.13 Tue Jan 30 22:11:17 2024 Test : SD Card Speed Test Run 1 prepare-file;0;0;720175;1406 seq-write;0;0;753287;1471 rand-4k-write;0;0;520126;130031 rand-4k-read;263196;65799;0;0 Sequential write speed 753287 KB/sec (target 10000) - PASS Random write speed 130031 IOPS (target 500) - PASS Random read speed 65799 IOPS (target 1500) - PASS Test PASS)
10:18, 31 January 2024 Harry talk contribs posted a new comment on How to update eeprom firmware (Hi, <pre> sudo apt update sudo apt upgrade sudo rpi-eeprom-update -a </pre> 1. above commad will update the bootloader to the last versin; 2. Run the '''lspci''' to check the ssd controler manufator. and the '''Phison ''' controler is incompatible.)
10:15, 31 January 2024 Harry talk contribs deleted comment #4346 on How to update eeprom firmware
10:03, 31 January 2024 Walker talk contribs posted a new comment on X1003 (We are now also collecting feedback from our buyers in order to provide it to other buyers)
10:01, 31 January 2024 Walker talk contribs posted a new comment on X1003 (Hi, according to buyer feedback, the Lexar Play M.2 2230 NVMe 1TB SSD is compatible with the X1003)
00:29, 31 January 2024 71.237.126.49 talk posted a new comment on Raspberry Pi 5 Model B (Your site does not allow me to register. I am reporting POSITIVE information/news. I have purchased an rpi5, your nvme shield X1000 v1.5, AND a Sabrent Rocket Nano NVME PCIe Gen3x4 M2 2242 SSD (512 GB). It uses a PHISON PS5013 E13 NVME controller (rev 01). IT WORKS GREAT using dtparam=pci_ex1 (have not tried speeding it up). Hope this info is useful for your database. I noted that you had problems with Phison controllers in the past. Regards, Rick rstiphout@live.com)
22:04, 30 January 2024 131.147.76.85 talk posted a new comment on X1003 (Can you tell us which SSDs you have confirmed to be working properly?)
11:19, 30 January 2024 Harry talk contribs posted a new comment on X1002 (800px)
11:18, 30 January 2024 Harry talk contribs deleted comment #4292 on X1002
11:16, 30 January 2024 Harry talk contribs deleted comment #4267 on X1002
11:15, 30 January 2024 Harry talk contribs deleted comment #4259 on X1002
11:02, 30 January 2024 Walker talk contribs posted a new comment on X306 (Thank you for your trust in our products!)
10:59, 30 January 2024 Walker talk contribs posted a new comment on X1201 (Yes, the x1201 is connected to the Raspberry Pi via pogo pins, no additional wires are needed!)
10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: <pre> sudo rpi-eeprom-config --edit </pre> Add PCIE_PROBE=1 line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
10:51, 30 January 2024 Harry talk contribs deleted comment #4348 on NVMe SSD boot with the Raspberry Pi 5
10:51, 30 January 2024 Harry talk contribs deleted comment #4321 on NVMe SSD boot with the Raspberry Pi 5
10:51, 30 January 2024 Harry talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks. Run command: sudo rpi-eeprom-config --edit Add '''PCIE_PROBE=1''' line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot)
10:12, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I reinserted the zif cable and now the WD_Black SN770 shows up on my desktop. However, I don't believe the test is using that drive, it is still terribly slow, like 60 MB/sec. So I think it is using the microSD.)
09:53, 30 January 2024 Walker talk contribs posted a new comment on How to update eeprom firmware (X1003, you can refer to it here:https://wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5 Hope it can help you)
09:50, 30 January 2024 162.221.219.52 talk posted a new comment on X1001 (I thought maybe I had just the wrong SSD, but I spent some more money and bought a WD_Black SN770 and though the test in both PCIE 2 and 3 modes give an answer, they are terribly slow and I suspect it is running the test on the microSD card and not the SSD. I don't think this is working at all.)
09:47, 30 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hello, X728 V2.5 is not applicable to Raspberry Pi 5, please refer to UPS series products for Raspberry Pi 5 X1200 X1201 X1202)
09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
09:43, 30 January 2024 Walker talk contribs posted a new comment on X728-Software (Please refer to our new script on the X728:X728-script)
09:39, 30 January 2024 Walker talk contribs posted a new comment on P579 (Metal cases generally have some degree of impact on WiFi and Bluetooth)
05:45, 30 January 2024 207.173.135.189 talk posted a new comment on P579 (To what extent does this P579 case reduce WiFi and Bluetooth signal strength?)
21:18, 29 January 2024 77.20.74.142 talk posted a new comment on X728-Software (Can the raspberry still be safely restarted with `sudo reboot`?)
11:51, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（By the way, provide your order number）)
11:49, 29 January 2024 Walker talk contribs posted a new comment on X1003 (Yes, only comes with 2242 fixing screws, if you need to install 2230, you need to prepare your own tools.)
11:49, 29 January 2024 68.61.201.10 talk posted a new comment on X728-Software (Why would it randomly stop shutting down fully? I've tried this firmware and countless others. 2 that use to work. x728off doesnt work.)
11:48, 29 January 2024 Walker talk contribs posted a new comment on P580 (The distance between the X1002 and the bottom of the enclosure is 6mm, so it is recommended that you choose an NVMe cooler that is smaller than 6mm.)
03:58, 29 January 2024 64.135.211.168 talk posted a new comment on X1003 (Is there some reason this should fail to work when using the raspberry pi imager UBUNTU image? i've followed all of the directions i can find here and on the internet and nothing works.)
01:45, 29 January 2024 90.191.18.190 talk posted a new comment on X306 (I was hesitant to buy this product because of some of the comments but I am glad I bought it. It is exactly what I need. I had a spare battery lying around without use, so I needed a UPS hat. The USB hub was a great extra. But, many comments here and reddit posts complained about USB hub not working. I had an impression that it is not working for everyone. But I can confirm, it is working for me. lsusb detects my usb drives (sandisk cruzer blade) and I can mount them. So if you needed a confi...)
18:24, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (Got it. No need for spacers, or wires. Connects directly to pogo pins on the pi when screwed on.)
18:01, 28 January 2024 77.167.188.242 talk posted a new comment on X1201 (How do you connect the UPS HAT to the raspberry pi? Only screws and spaces are included...)
12:11, 28 January 2024 64.135.211.168 talk posted a new comment on How to update eeprom firmware (sudo lsblk isn't showing the X1003 or the 2230 m-keyed m.2 nvme 512GB kingspec storage i added. neither is sudo lspci. i added the required lines to my raspberry pi 5b /boot/firmware/config.txt file and rebooted. EEPROM claims to be at the latest accordin to sudo rpi-eeprom-update -a . Pretty disappointed. Everything was VERy carefully installed. BOOTLOADER: up to date CURRENT: Mon Sep 25 10:44:03 UTC 2023 (1695638643) LATEST: Mon Sep 25 10:44:03 UTC 2023 (1695638643) RELE...)
11:11, 28 January 2024 64.135.211.168 talk posted a new comment on X1003 (it only comes with the ability to mount a 2242. there is no not supplied for 2230.) Tags: Mobile web edit, Mobile edit
04:39, 28 January 2024 84.52.56.212 talk posted a new comment on X728-hardware (Hi, Can you please clarify if the X728 V2.5 complies with the new Raspberry Pi 5 HW platform and the latest 64 bits OS Debian version: 12 (bookworm)? Can the scripts be used and installed at the same way? Thanks, Artur)
21:40, 27 January 2024 157.97.134.12 talk posted a new comment on P580 (What NVMe heatsink height will fit in this case?) Tags: Mobile web edit, Mobile edit
20:13, 27 January 2024 Nahumb talk contribs posted a new comment on X1001 (Hello, Can you please provide any 3D model file of the X1001? Thank you, Nahum Budin.)
20:11, 27 January 2024 Nahumb talk contribs posted a new comment on X1201 (Hello, Can you please provide any 3D model file of the X1201? Thank you, Nahum Budin.)
17:06, 27 January 2024 Walker talk contribs posted a new comment on X1003 (Thanks for sharing.)
12:30, 27 January 2024 Walker talk contribs posted a new comment on P579 (Hi, this P579 case is compatible with the official Raspberry Pi Active Cooler , X1000 X1001 X1003 comes with FFC Cable)
12:29, 27 January 2024 Walker talk contribs deleted comment #4322 on P579
12:28, 27 January 2024 Walker talk contribs posted a new comment on P579 (Hi, this P579 case is compatible with the official Raspberry Pi Active Cooler ,X1000 X1001 X1002 X1003 comes with FFC Cable)
12:22, 27 January 2024 Walker talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thank you very much, we're sure it will help others!)
12:20, 27 January 2024 Walker talk contribs posted a new comment on X735 (X735 V3.0 have the auto on jumper)
12:20, 27 January 2024 Walker talk contribs deleted comment #4319 on X735
12:20, 27 January 2024 Walker talk contribs posted a new comment on X735 (X735 V3.0 have the auto on)
09:19, 27 January 2024 71.121.201.60 talk posted a new comment on X1003 (Currently using with a Lexar Play M.2 2230 NVMe 1TB SSD. Works perfectly, boots Raspberry Pi OS with no issues. Running Gen 3 speed set in config.txt. Used 3M double-sided tape to hold SSD to X1003 adapter.)
07:15, 27 January 2024 24.47.197.145 talk posted a new comment on P579 (What about the cable and the heat sink?) Tags: Mobile web edit, Mobile edit
06:46, 27 January 2024 77.172.124.17 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (If the nvme is not recognised after adding dtparam=pciex1 to config.txt, add PCIE_PROBE=1 to the eeprom. That made my pi see the nvme.)
18:38, 26 January 2024 84.165.56.4 talk posted a new comment on X735 (does the X735 V3 also have a auo poweron jumper?)
18:27, 26 January 2024 Walker talk contribs posted a new comment on NASPi CM4-M2 (The 2 pins right above the OTG are AON (auto power-on), you can use the jumper cap to realize his function.)
01:00, 26 January 2024 99.40.7.152 talk posted a new comment on NASPi CM4-M2 (What purpose does the AA pin-pair on the front right of the board, immediately above the OTG pin-pair, serve?)
10:56, 25 January 2024 Walker talk contribs posted a new comment on X1001 (Hello, you can contact our technical support at '''support@geekworm.com ''' , By the way, provide your order number)
10:51, 25 January 2024 Walker talk contribs posted a new comment on X728 (Hello, we can't provide this, and we also need to remind you that X728 can't be used on Raspberry Pi 5, about UPS for Raspberry Pi 5 please refer to: X1200 X1201 X1202)
10:47, 25 January 2024 Walker talk contribs posted a new comment on X1001 (Thank you very much for your advice, we are sure it will help others!)
10:45, 25 January 2024 Walker talk contribs posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Thanks a lot for the advice.)
10:31, 25 January 2024 Walker talk contribs posted a new comment on X1003 (Hi, X1003's recommended drives , in general, are compatible, only some types of drives are not compatible, please refer to '''Important Notes ''', we are currently collecting feedback from buyers as well.)
10:24, 25 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hello, X728 V2.3 is not applicable to Raspberry Pi 5, please refer to UPS series products for Raspberry Pi 5: X1200 X1201 X1202)
09:23, 25 January 2024 65.78.155.208 talk posted a new comment on PiKVM-A3 (Can relevant product dimensions be provided so I can design my own 3d printed case for this product?)
08:59, 25 January 2024 68.55.76.208 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Not listed here but should be - you should also add the following line under the BOOT_ORDER line when configuring the eeprom: PCIE_PROBE=1 My Raspberry Pi 5 would see the NVMe SSD, but would not boot from it without this line. Using an SK Hynix PC601 256GB NVMe SSD)
01:01, 25 January 2024 46.116.2.227 talk posted a new comment on X728-hardware (Hi, Can you please clarify if the X728 V2.3 complies with the new Raspberry Pi 5 HW platform and the latest 64 bits OS Debian version: 12 (bookworm)? Can the scripts be used and installed at the same way? Thanks, Nahum Budin.)
00:50, 25 January 2024 136.62.159.27 talk posted a new comment on X1003 (Can you add a list of recommended drives that are known good?) Tags: Mobile web edit, Mobile edit
22:57, 24 January 2024 99.242.62.166 talk posted a new comment on X1001 (This doesn't look right. morey@rpi5:~ $ dd if=/dev/zero of=./Testingfile bs=100M count=10 oflag=direct dd if=./Testingfile of=/dev/zero bs=100M count=10 oflag=dsync 10+0 records in 10+0 records out 1048576000 bytes (1.0 GB, 1000 MiB) copied, 2.72273 s, 385 MB/s 10+0 records in 10+0 records out 1048576000 bytes (1.0 GB, 1000 MiB) copied, 2.61485 s, 401 MB/s Any ideas on what is wrong?)
12:22, 24 January 2024 174.84.18.78 talk posted a new comment on X728 (Please provide the STP file / CAD / measurement diagram so we can build a rear plate that accommodates both the PI4/5 and the UPS power connector. I do realize you already have your own case. Ours is completely different so we need the measurements. Thank you!)
05:09, 24 January 2024 184.179.162.35 talk posted a new comment on X1001 (Since the Pi passed the Gen 3 test, I went back and enabled the gen 3 (dtparam=pciex1_gen=3) in the config.txt file. Rebooted and it now mounts the SSD. Hope this helps.)
04:59, 24 January 2024 184.179.162.35 talk posted a new comment on X1001 (Same here. Get results for the speed test, but unable to mount SSD. WD_Black SN770 (Sandisk controller))
10:44, 23 January 2024 Walker talk contribs posted a new comment on X728 (Hi, can't use X728 on Raspberry Pi 5 ，The Raspberry Pi 5 has a dedicated UPS board.)
03:37, 23 January 2024 82.136.115.110 talk posted a new comment on X1002 (I also have Kingston NV2 on X1002. No problems)
23:10, 22 January 2024 5.203.151.99 talk posted a new comment on X728 (Hi, can i use x728 with pi5? I have 2 hats and i want to know.) Tags: Mobile web edit, Mobile edit
15:17, 22 January 2024 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Hi, X822 we don't sell it anymore, there is not enough space inside the Naspi Gemini 2.5 case to fit the UPS HAT, about the UPS board for Raspberry Pi 4, you can refer to the x703 X728 X708 X729)
15:05, 22 January 2024 Walker talk contribs posted a new comment on U100 (Hi, the product U100 is no longer available, can you provide me with your order number?)
15:02, 22 January 2024 Walker talk contribs posted a new comment on X728 (Hi, Raspberry Pi 5 UPS series, please refer to the X1200 X1201 X1202)
14:59, 22 January 2024 Walker talk contribs posted a new comment on X1002 ({{NVMe SSD Incompatibility List}})
14:58, 22 January 2024 Walker talk contribs posted a new comment on X1002 (Hi, since we can't test all SSD models, we've only tested which SSDs may be incompatible at this time!)
14:54, 22 January 2024 Walker talk contribs posted a new comment on P122 (Hi, we understand what you mean, you are talking about programming through scripts to realize the control of fan speed through GPIOs, but we haven't tested it so far.)
07:00, 22 January 2024 217.229.145.164 talk posted a new comment on NASPi Gemini 2.5 (As the question of Anonymous user #9 10 months ago is still not answered, I also ask: Is there a compatible UPS HAT or module with X822 and relative Naspi Gemini 2.5 case?)
00:42, 22 January 2024 162.221.219.52 talk posted a new comment on X1001 (It says that New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. But does not give instructions or links as to how to do that. I have installed a 1TB drive and gotten it to give me the speeds using the test, but it doesn't show up as a drive to choose. The drive is a crucial PD PCIe 3.0 NVMe M.2 SSD)
18:30, 21 January 2024 46.147.215.89 talk posted a new comment on U100 (Hello. The U100 board has SCL, SDA, PRE_ON_OFF, POW_OFF and IO_FAN outputs. Describe what they are for and how to use them.)
02:49, 21 January 2024 5.203.151.99 talk posted a new comment on X728 (Any news from Pi5 and x728?) Tags: Mobile web edit, Mobile edit
07:38, 20 January 2024 136.38.104.187 talk posted a new comment on X1002 (is the fikwotfsn501 pro its a pci gen3x4 compatable)
20:10, 19 January 2024 49.215.90.190 talk posted a new comment on P122 (for example, i can make a script that reads the temperature of the processor or other chips. if the temperature is over 40°C, the fan activates by providing 3.3V, and as the temperature rises, the voltage rises to 5V max as well when it reaches 60°C (or if dynamic voltage control is not possible, i can replace the temperature rising part to 3.3V static))
20:04, 19 January 2024 49.215.90.190 talk posted a new comment on P122 (i see. I understand it as "the speed is controlled by voltage". so i think maybe i can make it active cooling with auto fan speed control with script that controls GPIO which can control the voltage in a range of 0V、3.3V~(/)5V? just a assumption. i'm wondering if it's prohibited to do so.)
18:34, 19 January 2024 Walker talk contribs posted a new comment on P122 (Please note the connection of the fan 500px|How to connect)
18:28, 19 January 2024 Walker talk contribs posted a new comment on X728-script (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem（By the way, provide your order number）)
18:25, 19 January 2024 Walker talk contribs posted a new comment on P122 (Hello, this P122 version with fan is to control the fan via GPIO.)
18:23, 19 January 2024 Walker talk contribs posted a new comment on P122 (Hi, this doesn't really matter much, shield or the chip are both viable)
13:28, 19 January 2024 120.127.182.112 talk posted a new comment on P122 (Oh and, is it ok if i use GPIO to control the fan so i can make it active cooling? wondering if it's possible. I'm currently thinking use GPIO direct control, use a transistor, or a relay+transistor)
13:24, 19 January 2024 120.127.182.112 talk posted a new comment on P122 (hi, i also own this case. i'm wondering if, my thermal tape happens to have one side double-side-taped, should i attach the glued part to the shield or the chip? thx!)
21:42, 18 January 2024 98.235.40.60 talk posted a new comment on X728-script (Version 2.5)
15:36, 18 January 2024 147.161.229.99 talk posted a new comment on PiKVM-A8 (Hello together is the fan directly connected to 5V or is there a way to enable or disable the fan. The original fan started making noises, since it is only needed when accessing the KVM it would make sense to make it switchable.)
14:53, 18 January 2024 Walker talk contribs posted a new comment on X1001 Hardware (Hi, we will collect feedback from our customers,, as ssd is currently of many types, and we will also organize information on compatible SSD models.)
11:15, 18 January 2024 Walker talk contribs posted a new comment on X735-script (Hi, X735 V3.0 after installing the script, it is controlling the RPM by temperature, this default temperature will be reflected in the script, you can check the script)
10:58, 18 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, which version of x728 are you using?)
07:09, 18 January 2024 98.235.40.60 talk posted a new comment on X728-script (Can anybody help?)
06:41, 18 January 2024 173.88.121.145 talk posted a new comment on X1001 Hardware (Can you please post what NVMe SSD are valid. Listing only not valid does not help.)
17:26, 17 January 2024 78.42.75.101 talk posted a new comment on X735-script (Hi, have the same issue like user #7: just received everything including the X735 v3.0 I installed umbrel latest version 0.5.4 I used the script (that installed with no errors) the fan starts after reboot for 4 seconds and then stops. CPU Temp. is 54°C. What temp. the fan should run? Need help. Do you have any suggestion?)
11:58, 17 January 2024 Walker talk contribs posted a new comment on PiKVM (Hi, which product are you talking about? KVM-A4?)
11:56, 17 January 2024 Walker talk contribs posted a new comment on X1002 (Thanks for the detailed explanation, this will help others! We also recently tested some NVMe m.2 SSD {{NVMe SSD Incompatibility List}})
11:51, 17 January 2024 Walker talk contribs posted a new comment on X400 V3.0 (Hello, Could you please provide us with your order number? then you can contact us via our email: '''support@geekworm.com ''')
05:19, 17 January 2024 62.85.13.240 talk posted a new comment on X1002 (Kingston NV2 M.2 1TB works fine for me. Not sure what "Gen" is it. Received today X1002 and migrated everything on SSD and made it bootable without an issue. If you are struggled with driver not recognized in "lspci" check if you made everything right in "/boot/configuration.txt" by enabling PCIe port.)
04:54, 17 January 2024 49.37.243.69 talk posted a new comment on PiKVM (Can I stack another HAT on top, like IQaudio DAC. Which pins does the hdmi audio and oled use ?) Tags: Mobile web edit, Mobile edit
15:26, 16 January 2024 37.33.156.26 talk posted a new comment on X1002 (Confirmed kingston NV2 not work in X1002. Usually nvme works 3.3v 2.8A but Kingston NV2 may take more amps.) Tags: Mobile web edit, Mobile edit
02:06, 16 January 2024 187.209.92.61 talk posted a new comment on X400 V3.0 (q1. The speakers has no sound? I plug my headphones to listen music, and now the speakers has no sound? The amp Jumper is open.) Tags: Mobile web edit, Mobile edit
23:34, 15 January 2024 223.16.119.5 talk posted a new comment on X652 (how to connect to the local monitor?)
10:56, 15 January 2024 Walker talk contribs posted a new comment on T201 (Hi, Jetson Orin Nano 8gb There are currently no products with similar features to the T201)
10:48, 15 January 2024 Walker talk contribs posted a new comment on X1002 (Hi, it's generally Supports 2230/2242/2260/2280 NVMe M2 SSDs. and generally there are no compatibility issues)
19:24, 14 January 2024 37.33.20.129 talk posted a new comment on X1002 (Does X1002 support: Kingston NV2 M.2 NVMe Gen 4 1TB)
18:49, 14 January 2024 86.158.39.181 talk posted a new comment on T201 (Awesome, do you make this for Jetson Orin Nano 8gb?)
04:02, 14 January 2024 98.235.40.60 talk posted a new comment on X728-script (The battery indicator lights do not light up. If I remove the batteries, then plug in the AC power, all 4 will light up, then the 100% light will blink a couple of times, then all lights will go out.)
12:02, 12 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, please see our FAQ: https://wiki.geekworm.com/X728-script#FAQ)
12:01, 12 January 2024 Walker talk contribs deleted comment #4254 on X728-script
12:01, 12 January 2024 Walker talk contribs posted a new comment on X728-script (Hi, please refer to our FAQ: https://wiki.geekworm.com/index.php?title=X728-script&action=edit&section=13''' '''')
09:56, 12 January 2024 98.235.40.60 talk posted a new comment on X728-script (When I get to the part where you are supposed to check and review the i2c address, the x278 doesn't show up. If I skip that step, and try to clone the script github asks for a username and password.)
10:46, 11 January 2024 Walker talk contribs posted a new comment on P165 (Hi, the P165-B is for the Raspberry Pi 4B, the one that comes with it has thermal pads that are just right for the CPU and RAM, I don't know what's wrong with it, can you provide us with some pictures please? Can send to email at '''support@geekworm.com '''(by the way provide your order number))
01:39, 11 January 2024 93.41.237.150 talk posted a new comment on XScript (I wrote to support because after setting up the power service the Raspberry is stuck in a boot loop. According to support this is normal while the X-c1 hardware is not connected to the Raspberry. I think that this is a HUGE PROBLEM since the Raspberry becomes unusable if it's separated from the hardware or if the hardware should fail. I advise everyone to STAY AWAY from this script and possibly from the product: since the raspberry is stuck it's no longer possible to access it.)
01:34, 11 January 2024 37.201.213.47 talk posted a new comment on P165 (The P165-B cannot be installed on my Raspberry Pi 4 Model B because the block for the RAM is to thick even without the thermal pad. The heatsink sits on the RAM and wobbles in all directions) Tags: Mobile web edit, Mobile edit
17:55, 10 January 2024 Walker talk contribs posted a new comment on X735-script (Hi, we have tested Umbrel OS, if the pwm fan script is installed without errors, the fan is working fine, could you please provide us with more information? (e.g. video, your procedure), you can contact our tech support at '''support@geekworm.com ''''(by the way provide us your order number))
17:14, 10 January 2024 Walker talk contribs posted a new comment on X-UPS1 (Pls use high quality batteries from PANPASONIC, Toshiba, etc. Do not use the battery with built-in protection circuit. 700px)
09:08, 10 January 2024 68.205.83.233 talk posted a new comment on X735-script (Hi, just received everything including the X735 v3.0 I installed umbrel latest version 0.5.4 I used the script (that installed with no errors) but the fan are not running at all. Do you have any suggestion?) Tags: Mobile web edit, Mobile edit
05:31, 10 January 2024 109.250.130.185 talk posted a new comment on XScript (Same here. I installed the scripts on a Raspberry Pi 4B with DietPi (which is Debian under the hood). Fan script is working well, but the shutdown script only prints the downtime info and does nothing afterwards. Need some assistance here.)
14:32, 9 January 2024 107.192.107.159 talk posted a new comment on X-UPS1 (Hello, button top of flat top 18650? Protection circuit? For US users, it's be helpful to link to batteries on imrbatteries.com, as they specify many details like that.) Tags: Mobile web edit, Mobile edit
10:23, 9 January 2024 68.226.119.5 talk posted a new comment on X728 (I too would appreciate a 10-30 vdc input on the 5521 jack. It's easy to provide that range and let the x728 drop it to 5.1 +/-5%. It's much harder to build up an external 5.1 v 4 amp ps. I'd happily pay extra for that feature.)
17:53, 8 January 2024 Walker talk contribs posted a new comment on X728 (We just did a simple test, by unplugging or plugging in the USB-C port, the X728 V2.5 is able to restore the power , it is not clear what the exact cause of your situation, you can contact our technical support at '''support@geekworm.com ''' ,If possible, you can provide a video of your operation, so that we can more clearly understand the causes of the problem.(By the way, provide your order number))
11:05, 8 January 2024 Walker talk contribs posted a new comment on C296 (thank you)
22:15, 6 January 2024 86.38.74.3 talk posted a new comment on X728 (Hello, we looking for solution to softshutdown RPI4B when power fails and boot again when power restores in factory - over 100pcs. Can x728 achieve this function? Purchased one x728v2.5 for tests - installed exactly as instructed here but it behaves strange. Shoulddown action is ok, but when power restores it does no boot. If power removed and restored once again - RPI starts as expeted. Does anybody know what is that? Any cjances to resolve this? AUTO_ON jumper installed. Shutdown is done b...)
13:45, 5 January 2024 47.17.236.33 talk posted a new comment on C296 (The Heatsink feet are 0.090" off the surface of the heatsink. the Pi Zero 2017 has CPU about 0.050 and the copper pad was 0.030 think.. so a film of Heatsink compound of 0.005 per side will do it. THe Bluetooth was super tiny, and only 0.010 off the board. so i doubled up the thicker heat sink compound and let it rip. if it overheats, I'll slip in some copper strip between.)
11:00, 4 January 2024 Walker talk contribs posted a new comment on X735 (Hi, we haven't tested x735 on Raspberry Pi 5 yet, it should not work!)
10:55, 4 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hi, sorry, this belongs to the content of product design, this we have no way to provide)
10:55, 4 January 2024 Walker talk contribs deleted comment #4237 on X728-hardware
10:55, 4 January 2024 Walker talk contribs posted a new comment on X728-hardware (Hi, I'm sorry, this belongs to the content of product design, this we have no way to provide)
10:49, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com ''')
10:49, 4 January 2024 Walker talk contribs deleted comment #4235 on X950 software
10:49, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com ''')
10:48, 4 January 2024 Walker talk contribs deleted comment #4234 on X950 software
10:48, 4 January 2024 Walker talk contribs posted a new comment on X950 software (Hello, please provide your order number, then you can contact our technical support at : '''support@geekworm.com '''')
10:45, 4 January 2024 58.11.52.17 talk posted a new comment on X950 software (I found that "IQaudIO DAC" works.)
07:22, 4 January 2024 68.50.12.65 talk posted a new comment on X735 (Will X735 v3.0 work with raspberry pi 5?)
23:03, 3 January 2024 109.43.240.199 talk posted a new comment on X728-hardware (Can you please provide details what each GPIO does (instead of just writing "Power Management")? I could figure out from some forum posts, that when GPIO12 goes low, the x728 should power down with some delay. In my case this is not working. The aim is to power down the Raspberry safely via "poweroff" and then cut the power. Again details to the funciton of the GPIOs would be great. Like for example "Pulling GPIO26 high for 2s cuts the power". Otherwise its guesswork from the scripts.)
21:58, 3 January 2024 58.11.52.17 talk posted a new comment on X950 software (On piCorePlayer 8.2.0 64-bit, I don't get any sound. I tried both "Audiophonics ISabre Q2M" and "RPi DAC")
18:13, 3 January 2024 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, KVM-A3 with 2.5x20, P165-B height of 11MM, normally, with 2.5 * 9 + 5 or 2.5 * 9 + 6 are feasible!)
15:39, 3 January 2024 27.116.208.36 talk posted a new comment on PiKVM-A3 (Just thought I'd confirm for anyone interested that the Raspberry Pi 4 11mm embedded heatsink (P165-B) is compatible with the KVM-A3 Kit using four 2.5x9+6 standoffs instead of the 2.5x20 standoffs included in the KVM-A3 Kit. The fan doesn't get in the way and everything fits perfectly.)
14:38, 2 January 2024 Walker talk contribs posted a new comment on X735-script (Hello, please provide your order number, then you can send it to our email: '''support@geekworm.com ''', we will solve the problem for you!)
14:38, 2 January 2024 Walker talk contribs deleted comment #4226 on X735-script
14:38, 2 January 2024 Walker talk contribs posted a new comment on X735-script (Hello, please provide your order number, then you can send an email to our email: '''support@geekworm.com '''')
14:33, 2 January 2024 Walker talk contribs posted a new comment on LVDS Adapter (It is not recommend to use with 4K TV as it may have some compability problem)
09:57, 2 January 2024 76.178.139.135 talk posted a new comment on LVDS Adapter (Anonymous User #25 asked why there were two LVDS inputs on some boards. I don't think of them as both inputs, they're just two sets of pins. I use the second set as an "output" to make sure that my LVDS signal still works by running it to a monitor.)
03:43, 31 December 2023 73.48.160.119 talk posted a new comment on X735-script (fan still not working. ran this on a new x735 v3.0)
04:49, 30 December 2023 89.24.40.197 talk posted a new comment on LVDS Adapter (Hello, it wil function with tv tcl 4k with mainboard 2x 30 pin? Thanks) Tags: Mobile web edit, Mobile edit
16:35, 29 December 2023 Harry talk contribs posted a new comment on X729 (not compatible with orange pi shield)
16:13, 28 December 2023 Walker talk contribs deleted comment #4219 on P511
16:12, 28 December 2023 Walker talk contribs posted a new comment on P511 (Hello, the thickness of the P511 thermal pad is about 0.9 mm, and the heat dissipation of the ethernet transceiver is relatively low, so it is generally not considered.)
16:07, 28 December 2023 Walker talk contribs deleted comment #4154 on P511

(newest | oldest) View (newer 250 | older 250) (20 | 50 | 100 | 250 | 500)

Comments log

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

In other languages

WIKI