Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
  • 23:12, 25 December 2024 79.50.95.16 talk posted a new comment on How to enable I2C (Just in case, if i2cdetect is not present on your system, you can install it via "sudo apt install i2c-tools")
  • 16:09, 25 December 2024 68.203.241.82 talk posted a new comment on X1201 (i dont have the UPS, would the pi5 fit inside on its own?)
  • 10:25, 24 December 2024 Lisa talk contribs posted a new comment on X882 (Hello,Dual SATA 2.5" HDD / SSD expansion board for RPi5, Please refer to X1007)
  • 10:22, 24 December 2024 Lisa talk contribs posted a new comment on X180 (Hi,X180 has been discontinued.)
  • 07:10, 24 December 2024 195.240.107.204 talk posted a new comment on X180 (Is it still manufacured? Where can I buy it?)
  • 01:58, 24 December 2024 94.191.138.0 talk posted a new comment on X882 (What about pi5?) Tags: Mobile web edit, Mobile edit
  • 18:30, 23 December 2024 Lisa talk contribs posted a new comment on GEEKWORM NAS Family (Which product are you using? [4010 3Pin PWM fan] is 5V;)
  • 16:03, 23 December 2024 Lisa talk contribs posted a new comment on X1003 (Sorry for the inconvenience, X1003 has been updated to white FFC cable, maybe Amazon warehouse still has some stock with yellow cable, if you need white FFC cable, please email us <support@geekworm.com> （note your order NO. please） ; And thanks for your feedback, glad you share your solution with us here.)
  • 15:35, 23 December 2024 Lisa talk contribs posted a new comment on X708-Hardware ([❾ How to programming to get ASD function on V1.2 version] is just an example. You can insert a command to implement ASD function when installing the scriptX708-script.)
  • 15:31, 23 December 2024 Lisa talk contribs posted a new comment on X708-Hardware (ASD fundtion is removed on V1.2 version,but you can achieve this function through software programming. please refer to：❾ How to programming to get ASD function on V1.2 version)
  • 02:39, 22 December 2024 24.17.155.221 talk posted a new comment on X1003 (I have the X1003 v1.3 on an 8GB pi 5. Latest pi firmware (Dec 2024 date). 256GB nvme from amazon that lspci shows as: KIOXIA Corporation NVMe SSD Controller BG5 (DRAM-less). The setup is very sensitive to the pcie cable used and pcie speed set in config.txt on the pi. My x1003 came only with the short gold/kapton color cable that (I think) has a ground plane on one side and the ground pins connected with vias to the ground plane. Look very closely at the cable to identify the vias....)
  • 23:58, 21 December 2024 45.84.137.156 talk posted a new comment on X708-Hardware (Hello, I don't understand where and how this code below will be inserted for this ASD fonction operate. Please tell me Thank's !)
  • 19:53, 21 December 2024 194.32.230.170 talk posted a new comment on GEEKWORM NAS Family (Hello! What voltage does "4010 3Pin PWM fan" require? Is there a possibility to use 12V PC case 3pin fan instead?)
  • 12:14, 18 December 2024 Harry talk contribs posted a new comment on How to Configure RAID Setting (To be safe, back up your data, install a new HDD, reconfigure RAID, and restore data from backup)
  • 12:02, 18 December 2024 Harry talk contribs posted a new comment on How to Configure RAID Setting (Refer to [https://forum.radxa.com/t/setting-up-hardware-raid-with-quad-sata-hat-jms561-controller/5863 Setting up HARDWARE RAID with QUAD SATA-HAT (jms561 controller)])
  • 12:02, 18 December 2024 Harry talk contribs deleted comment #5385 on How to Configure RAID Setting
  • 12:02, 18 December 2024 Harry talk contribs posted a new comment on How to Configure RAID Setting (Refer to https://forum.radxa.com/t/setting-up-hardware-raid-with-quad-sata-hat-jms561-controller/5863)
  • 04:53, 18 December 2024 79.155.124.212 talk posted a new comment on How to Configure RAID Setting (In case of a failure of one of the HDDs, should I absolutely use the NASPi to read the data, or can I extract the disk and connect it to my computer with a SATA-USB adapter to read the data from there? In other words, does the controller only perform the copying and verification, or does it also add metadata and other elements to the data structure, making it impossible to read from my other machine?) Tags: Mobile web edit, Mobile edit
  • 10:27, 17 December 2024 Lisa talk contribs deleted comment #5382 on X862 V2.0
  • 10:27, 17 December 2024 Lisa talk contribs posted a new comment on X862 V2.0 (Can you please provide the logistics installation diagram and screenshots of the running command errors by the email.support@geekworm.com；pleas tell us your order No. support@geekworm.com)
  • 10:26, 17 December 2024 Lisa talk contribs posted a new comment on X862 V2.0 (Can you please provide the logistics installation diagram and screenshots of the running command errors by the email.support@geekworm.com；pleas tell us your order No. support@geekworm.com)
  • 10:26, 17 December 2024 Lisa talk contribs deleted comment #5381 on X862 V2.0
  • 10:26, 17 December 2024 Lisa talk contribs posted a new comment on X862 V2.0 (Hi，Can you please provide the logistics installation diagram and screenshots of the running command errors by the email.support@geekworm.com)
  • 07:37, 17 December 2024 80.121.104.45 talk posted a new comment on X862 V2.0 (Just bought the X862 and it does not boot from SSD. Bootloader reports error reading FAT. Same SSD with same content boots instantly when using a external USB/NGFF adapter (ASMT105x chipset). Running PI4 with no other USB device connected, WIFI is turned off.)
  • 09:22, 12 December 2024 136.226.234.185 talk posted a new comment on X1300 Software (need to convert from bgr to rgb)
  • 00:33, 12 December 2024 188.27.43.60 talk posted a new comment on X825 V2.0 (Well, this was supposed to be a high-quality PS, and other PSs of the same type work OK, but I guess each lot has its black sheep.)
  • 19:21, 11 December 2024 217.88.244.114 talk posted a new comment on X1001 (Patriot P310 and P320 are working for me. The P300 seems to exist in different versions with different controllers. One with a black circuit board and a Phison E13T controller, and one with a blue board and a SMI 2263XT controller.)
  • 00:20, 11 December 2024 157.143.60.196 talk posted a new comment on X1001 (Anybody tested it with Patriot P300 SSD ? Thank you !)
  • 11:59, 10 December 2024 Harry talk contribs deleted comment #5339 on X306
  • 10:20, 10 December 2024 Lisa talk contribs posted a new comment on X825 V2.0 (It is recommended that you replace a high-quality power supply and test it. a low-quality power supply will damage the expansion board.)
  • 10:16, 10 December 2024 Lisa talk contribs posted a new comment on How to read the battery capacity via I2C on X750&725 (please refer to [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1202 Software]----3.0 Reading UPS status)
  • 10:14, 10 December 2024 Lisa talk contribs deleted comment #5373 on How to read the battery capacity via I2C on X750&725
  • 10:14, 10 December 2024 Lisa talk contribs posted a new comment on How to read the battery capacity via I2C on X750&725 (please refer to X1202#X1202 Software)
  • 05:50, 10 December 2024 188.27.43.60 talk posted a new comment on X825 V2.0 (It seems the problem was actually the power supply, which stopped working correctly.)
  • 23:55, 9 December 2024 85.49.241.51 talk posted a new comment on How to read the battery capacity via I2C on X750&725 (@Lisa, Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (MAX 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection)
  • 18:38, 9 December 2024 Lisa talk contribs posted a new comment on X728-script (Hi，Which version are you using? please check if the script was installed successfully? Software safe shutdown command: x728off DON'T run the 'shutdown' linux command to shut down. You can verify the safety switch through the onboard switch, press and hold the switch for 3 seconds, then the blue LED will flash slowly and the shutdown is going then all LEDs will be off until the device is completely powered off. If the problem still does not appear after checking the above steps, please co...)
  • 18:18, 9 December 2024 Harry talk contribs posted a new comment on X735-script (Hello, which os version? Bookworm or Bullseye? Please email to us at support@geekworm.com)
  • 18:18, 9 December 2024 Harry talk contribs deleted comment #5368 on X735-script
  • 18:18, 9 December 2024 Harry talk contribs posted a new comment on X735-script (Hello, which os version? Bookworm or Bullseye? Please emeil to us at support@geekworm.com)
  • 18:06, 9 December 2024 Lisa talk contribs posted a new comment on How to read the battery capacity via I2C on X750&725 (Hi，The x725 & X750 are no longer in production and we have not tested them with the RPi5. Which UPS HAT are you using?)
  • 17:43, 9 December 2024 Lisa talk contribs posted a new comment on X825 V2.0 (Hi,Where is the noise coming from? Can you please send a video by email? and please tell us your order number.<support@geekworm.com>)
  • 08:22, 9 December 2024 195.192.96.124 talk posted a new comment on X728-script (@Lisa it does, i found a way to reprogramm "x728-v2.x-plsd-gpiod.py" and save it in "sudo cp -f ./x728-v2.x-plsd-gpiod.py /usr/local/bin/" #!/usr/bin/env python import gpiod import time import subprocess # Define the chip and lines chipname = "gpiochip0" # Please use gpiochip0 if using Raspberry Pi 4/3 hardware # chipname = "gpiochip4" # Please use gpiochip4 if using Raspberry Pi 5 hardware line_offset = 6 out_line_offset = 26 # Open the GPIO chip chip = gpiod.Chip(chipname) # Get the...)
  • 05:23, 9 December 2024 77.12.183.126 talk posted a new comment on X735-script (Tried to install the script on a fresh and fully updated installation of Raspberry OS Lite (64-bit) on a Raspberry Pi 3 Model B+. I followed the steps above until command: sudo ./install-pwr-service.sh The system then notifies with: "Start installing the power management service... Created symlink /etc/systemd/system/multi-user.target.wants/x735-pwr.service → /lib/systemd/system/x735-pwr.service. Power management service installed" BUT in the second thereafter the system shuts down with...)
  • 18:03, 8 December 2024 85.49.241.51 talk posted a new comment on How to read the battery capacity via I2C on X750&725 (having issues on rpi5: ``` > sudo bash x750.sh sed: can't read /etc/rc.local: No such file or directory sed: can't read /etc/rc.local: No such file or directory sed: can't read /etc/rc.local: No such file or directory sed: can't read /etc/rc.local: No such file or directory x750.sh: line 123: /home/pi/x750ups.py: No such file or directory chmod: cannot access '/home/ozelen/x750ups.py': No such file or directory ``` in the first place I had problem with running `sudo apt-get install python-sm...)
  • 01:52, 8 December 2024 80.40.187.228 talk posted a new comment on X728-script (Hi, followed install on a Pi4 with Bookworm. All seems to work until you test the soft shut down. It says shutting down in 2 seconds but doesn’t shutdown. Any ideas what to do to fix this or how to problem solve? Thanks) Tags: Mobile web edit, Mobile edit
  • 22:25, 7 December 2024 188.27.43.60 talk posted a new comment on X825 V2.0 (Hello, I have been using a board for a while and now it started making a very high pitch noise. Is it still safe to operate the board?)
  • 18:05, 6 December 2024 Lisa talk contribs posted a new comment on X1015 (Hi,Generally speaking, it should not be a power supply problem. You can try another FFC cable to test. and if you use a metal case, it will also have some impact on the WiFi.)
  • 10:47, 6 December 2024 Lisa talk contribs posted a new comment on KVM-A3 (Hi，Please send installation pictures or videos via email, and please tell us your order number. support@geekworm.com)
  • 09:42, 6 December 2024 Lisa talk contribs posted a new comment on X1001 (It is recommended that you re-flash the OS. Generally speaking, re-flash the OS can solve all problems.)
  • 03:01, 6 December 2024 46.138.90.235 talk posted a new comment on X1015 (My WiFi on raspi-5 just freezes and breaks when I try to mkfs on NVMe drive (MZ-V8V1T0). I am using the official 5V/5A adapter. Is this a power issue in the X1015?)
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"