LHT00SU1 Virtual Oscilloscope SKU:412961

From Geekworm Wiki
Jump to navigation Jump to search

LHT00SU1 Virtual Oscilloscope sku:412961
LHT00SU1 Virtual Oscilloscope sku:412961
LHT00SU1 Virtual Oscilloscope sku:412961


  • Dual input oscilloscope (single, 16Msps, 3MHz bandwidth)
  • 8-channel logic analyzer
  • Data Logger
  • Dual channel voltmeter
  • Mixed signal oscilloscopes and logic analyzer
  • Frequency meter
  • Remote controller
  • PWM controller
  • Frequency generator
  • I2C controller
  • Pulse / edge counter
  • 8 digital channel + 1 analog channel logic analyzer, support for multiple protocols

Analog parameters

  • Number of input channels: 2 channel
  • Sampling channel: 1 channel
  • The maximum sampling frequency: 16MHz
  • The maximum analog bandwidth: 3MHz
  • Input voltage range: -10V to + 10V
  • Sensitivity: 78mV
  • Maximum vertical resolution: 256 level

Digital parameters

  • Number of channels: 8
  • Input voltage: 0V-5.3V
  • Input Low level: <0.8V
  • Input high level: >1.4V
  • Supported protocols: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2

The communication interface parameters:

USB parameters: USB2.0 high-speed 480Mbps

System requirements

  • Supported operating systems Win2000 / XP / Vista / WIN7 (32bit)
  • Celeron 4 2.0G or Pentium 4 1.8G higher processor
  • Need USB2.0 high speed interface, does not support full speed USB2.0 or USB1.1
  • Memory Requirements 128M or more
  • Need 2G or more hard disk
  • You need to install Framework 3.5 SP1

Note: If your system is WINDOWS XP, please check whether your computer has ".NET 3.5 SP1" this component, if not, go to the Microsoft website to download and install.

Driver Download

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Anonymous user #3

54 months ago
Score 0++
Is there any way to make any of the lines outputs eg for outputting SPI/I2C

Anonymous user #2

56 months ago
Score 0++
lht00su1 virtual driver

Anonymous user #1

64 months ago
Score 0++

for English edition of the USBee AX software you can download a copy https://usbe...om/download/

Also www.archive.org is useful for obtaining the final versions from archived copies of www.usbee.com

Sigroks pulseview can work with this too but only when using its zadig tools driver. Can set one USB socket on PC to USBee driver and another for zadig WinUSB driver to get the best of both worlds.


64 months ago
Score 0++