Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 09:39, 10 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi, could you please send us some test videos？and tell us your order number,please send to <support@geekworm.com>；thanks~)
• 11:17, 9 February 2022 Lisa talk contribs performed unknown action "comments/add" on X708 (Hi， The x708 can charge the batteries in power off state.And the battery indicator flashes to show the charging status. Please check whether the power supply is connected to the x708 and whether the power supply is in poor contact.)
• 11:01, 9 February 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello, 1/ X728 V2.1 add a buzzer controlled by CPIO 20; please plug in the power supply to the X728 without raspberry pi , and turn it on to check if it is still calling; if not, please check GPIO 20 is occupied. Raspberry Pi Tutorial: How to Use a Buzzer: please refer to :X728-Software#FAQ)
• 10:50, 9 February 2022 Lisa talk contribs performed unknown action "comments/add" on X735 V2.5 Software (Hello, Sorry,we have not tested it on openmediavault yet, please try to test it on RASPBIAN.)
• 15:00, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on X735 V2.5 Hardware (Hello， pin#38(GPIO20) for power management.please refer to [Pins and GPIO used] above. X735 cannot share PIN with other devices, otherwise power management will not work properly.)
• 14:56, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on X703 (Hello， X703 not support reading battery voltage and percentage.)
• 14:30, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (Hello, Could you please tell us more details？ What is the error message when installing the script?)
• 14:19, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi (Hello, Please refer X-C1 Software)
• 14:18, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi (Hi， PWM fans require proper scripting to work. Please refer hereX-C1 Software)
• 14:13, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 power off guide (Hello， Yes, you can measure whether the gpio6 is really a logic 1 according to the configured driver. Delayed shutdown function: please try to implement through software.)
• 11:23, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on X883 (Hello，friend Could you please tell us more details， and send some test pictures or videos？send to 【support@geekworm.com】； Thanks.)
• 11:18, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on X883 (Hello， There is no matching case yet.)
• 11:17, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on 2.8 inch Touch Screen for Pi zero (Hello， Realy sorry, we are not sure yet. Geekworm)
• 11:14, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 (Hello， Sorry， It is not supported.)
• 11:09, 8 February 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 (Hello， Auto ON is a hardware function and not affect system updates. Please refresh the system and try again.Thanks.)
• 12:26, 27 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-Software (Hi， please try to use 【sudo apt-get -y install python3-smbus i2c-tools】and test it.)
• 11:37, 25 January 2022 Lisa talk contribs performed unknown action "comments/add" on X862 V2.0 (Hi！ Yes，X862 support that)
• 11:34, 25 January 2022 Lisa talk contribs performed unknown action "comments/add" on X883 (Hello， X883 is equivalent to connecting 2 HDDs to the USB port of Raspberry Pi, does not support RAID1)
• 09:45, 24 January 2022 Lisa talk contribs performed unknown action "comments/add" on X765 (Hi， X765 be powered via Ethernet; X765 powers the Raspberry Pi via GPIO; Raspberry Pi powers X862 via USB connector)
• 18:03, 22 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， Yes, you can use batteries with a protection circuit, but please pay attention to the battery size requirements--X728-hardware#18650 battery dimension. However, many batteries with protection circuits are too large to be installed. To avoid this problem, we require the use of batteries without protection circuits. And please use quality 18650 batteries, inferior batteries will damage the ups board.)
• 15:24, 22 January 2022 Lisa talk contribs performed unknown action "comments/add" on X862 V2.0 (Hi， X765 POE hat compatible with X862. you can use itX765)
• 10:22, 21 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hello You mean that RPI is not powered off, but x728 is still running? This doesn't happen because the Raspberry Pi is powered off via the x728.)
• 10:02, 21 January 2022 Lisa talk contribs performed unknown action "comments/add" on X880 (Hi Sorry，there are currently no power management boards or PWM fan that support x880.)
• 11:21, 20 January 2022 Lisa talk contribs performed unknown action "comments/add" on X880 (Hi, 12V OUT -- depends on the power supply you use; 5V OUT -- total output is 5A (shared with motherboard and HDD))
• 11:15, 20 January 2022 Lisa talk contribs performed unknown action "comments/add" on X862 V2.0 (Hi, X873 board is supports M.2 NVMe SSD , but X873 has been discontinued. X862 board ONLY support M.2 NGFF SSD Key-B 2280 length.)
• 18:15, 19 January 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (Hi，Sorry, it is not supported yet)
• 18:13, 19 January 2022 Lisa talk contribs performed unknown action "comments/add" on 2.4 LCD (Hi， Thanks for your feedback, we will be selling the 2.4 inch screen without case at the Geekworm store. Best regards)
• 12:39, 18 January 2022 Lisa talk contribs performed unknown action "comments/add" on X708-Software (Hi, The script command we provide is 'x708off'----editable; 'poweroff' is a kernel command.)
• 11:07, 18 January 2022 Lisa talk contribs performed unknown action "comments/add" on X950 software (Hi, We saw that you also left a message hereDACPi, and replied to you.)
• 11:05, 18 January 2022 Lisa talk contribs performed unknown action "comments/add" on DACPi (Hi, Where did you buy the DACPi? could you please tell us your order number，Thanks. you can also contact us by [support@geekworm.com])
• 10:18, 18 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi, 1.The new version cancels the ASD(Auto shutdown) jumper, you can achieve a safe shutdown through software.please referX728-Software. 2.[when the external power is restored while RPi is still under Battery power]--The external power supply powers both the battery and Raspberry Pi.)
• 14:57, 17 January 2022 Lisa talk contribs performed unknown action "comments/add" on X715 Software (Hi， could you please tell us more details. such as what OS are you using? Does it work with Pi 4? Would you mind telling us the order number?)
• 10:03, 17 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi， Please refer to the two pictures at the top right of X728. Thanks~)
• 09:58, 17 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728-Software (Hi， The version code is marked on the front of the x728 UPS board, please check your X728 board. Thanks.)
• 09:54, 17 January 2022 Lisa talk contribs performed unknown action "comments/add" on LVDS Adapter (Hi， It should work in theory, but we haven't tested this chip, you can try to test it.Thank you.)
• 17:29, 14 January 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 (Hello， For you questions 1/2/3）you need to turn off the power by the switch. 4) Please refer to 'AUTO ON' function)
• 14:27, 13 January 2022 Lisa talk contribs performed unknown action "comments/add" on LVDS Adapter (Hello, What chip is your LVDS output? There are some LVDS output by the adapter chip, although it is a general resolution, but after conversion, the clock signal or impedance may increase, and it will not be displayed. Please refer to the VESA protocol (LVDS Adapter#Document VESA-Timing-New )to adjust the screen parameters.)
• 09:39, 10 January 2022 Lisa talk contribs performed unknown action "comments/add" on X735 (Hello， Could you please tell us more details, what system are you using? Please reboot after successfully installing the software.)
• 11:16, 6 January 2022 Lisa talk contribs performed unknown action "comments/add" on X829 (Hello， we have not tested x829 + raspberry pi 400 Keyboard； It can be used together in theory,you can test it if you have a x829 board. But the x829 board has been discontinued, please refer to its upgraded version x883. Best regards)
• 11:09, 6 January 2022 Lisa talk contribs performed unknown action "comments/delete" on X829
• 11:04, 6 January 2022 Lisa talk contribs performed unknown action "comments/add" on X829 (Hello，Sorry, we have not tested x829 + raspberry pi 400 Keyboard)
• 16:10, 5 January 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 (Hello， Please refer the above script of [User Manual] , please try another network source to reinstall and test.)
• 15:21, 5 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello， It's 5V output, directly connected to the Raspberry Pi 40-pin header--pin 2,pin 4 ；output current is shared, and X728-A1 has no set limit.)
• 15:14, 5 January 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 09:49, 5 January 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hello，It depends on your power supply or batteries.)
• 18:22, 4 January 2022 Lisa talk contribs created page File:IMG-0233-4Pin Function Header.jpg
• 18:22, 4 January 2022 Lisa talk contribs uploaded File:IMG-0233-4Pin Function Header.jpg
• 15:18, 3 January 2022 Lisa talk contribs performed unknown action "comments/add" on X735 V2.5 Software (Hello， Please try to refresh the system, reinstall and test it again.)
• 15:15, 3 January 2022 Lisa talk contribs performed unknown action "comments/add" on UPS3 (Hello， sorry，I don't understand what you need.Could you please tell us more details？ For UPS 3 GPIO PIN and instructions, please refer to the picture and the content above.)
• 12:41, 31 December 2021 Lisa talk contribs performed unknown action "comments/add" on X825 (Hello， For no hard drive detected-- could you please tell us more details, send some installation and test pictures？<support@geekworm.com> And please tell us the order number，Thanks！)