Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 06:11, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (for me UASP is supported. Use command "lshw -class disk -class storage" and watch for line "driver=uas")
  • 06:10, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (on my board is a ASMEDIA ASM1153E)
  • 06:00, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (The head of the provided screws is a little to big for mounting the SSD on the adapter.)
  • 05:58, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (for me UASP is supported. use command "lshw -class disk -class storage" and watch for line "driver=uas")
  • 05:56, 20 December 2020 46.142.160.220 talk posted a new comment on Does the X825/X855 support USB boot (In the meantime USB boot is working and productive on RasPi4.)
  • 05:14, 20 December 2020 24.5.10.142 talk posted a new comment on X350 (Rather than using the supplied USB connector can we use a wired USB-to-USB connector?)
  • 16:38, 19 December 2020 109.252.70.46 talk posted a new comment on X725 (Cant use x725! After 24 h it starts to discharge batterys - but power is connected. Why? Is it a bug or function?)
  • 07:09, 19 December 2020 2.28.133.166 talk posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (it does not work)
  • 17:17, 15 December 2020 Xiali talk contribs posted a new comment on P173 (Hi dear ,the additional thermal tapes is gift(Backups) ,you can ignore them if you don't need them.By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 16:15, 11 December 2020 109.89.64.140 talk posted a new comment on P173 (I bought this package. This is not correct , I got 8 little thermal tapes instead of 3. But you must put only one in each location (4))
  • 15:38, 10 December 2020 Xiali talk contribs posted a new comment on X708-Software (Hi dear ,X708 will cut off the power after the system is shut down, you need to install the script first,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:12, 10 December 2020 Xiali talk contribs posted a new comment on X728 (It should be caused by the HDMI input resolution higher than 1080p25fps (the resolution supported by the Raspberry Pi is 1080p25fps)，By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 00:49, 10 December 2020 66.193.168.10 talk posted a new comment on X728 (Never mind, one of the TPS61088 Synchronous Boost Converters had a cold solder joint. I was able to flex the board and make the problem come and go. When I reflowed solder to and around the converter the problems went away. Unfortunately due to the quality of construction I will not be able to use it for my intended purpose. Bummer!)
  • 00:21, 10 December 2020 66.193.168.10 talk posted a new comment on X728 (Mine seems to be defective, it's outputting 13.4v and the 5v out led flashes regardless of the condition. it seems to charge ok. I was planning on using this in an embedded application with an rpi 4b but I now have concerns about reliability. Anything to try?)
  • 21:05, 9 December 2020 87.10.53.207 talk posted a new comment on X735 (Hi, I have raspberri pi 4 whit Ubuntu 20.04. Could you explain step by step the procedure you did for ubuntu mate 20.04 (also describe in your original language)? Will it also work on Ubuntu 20.04? Grazie Best Regards Nicola)
  • 18:07, 9 December 2020 103.214.222.222 talk posted a new comment on X708-Software (Hi. Is there a way to increase the delay between when "poweroff" of the RPI starts and the X708 drops power? This would allow to add a longer delay so that the OS is completely shutdown?)
  • 00:35, 9 December 2020 75.20.188.14 talk posted a new comment on RPi UPSPack (pi@raspberrypi:~ $ sudo python3 /home/pi/UPSPACK_V3/UPS_GUI_py/UPS_GUI_demo.py Traceback (most recent call last): File "/home/pi/UPSPACK_V3/UPS_GUI_py/UPS_GUI_demo.py", line 69, in <module> window = tk.Tk() File "/usr/lib/python3.7/tkinter/__init__.py", line 2023, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) _tkinter.TclError: no display name and no $DISPLAY environment variable)
  • 00:35, 9 December 2020 75.20.188.14 talk posted a new comment on RPi UPSPack (pi@raspberrypi:~ $ sudo python3 /home/pi/UPSPACK_V3/UPS_GUI_py/UPS_GUI_demo.py Traceback (most recent call last): File "/home/pi/UPSPACK_V3/UPS_GUI_py/UPS_GUI_demo.py", line 69, in <module> window = tk.Tk() File "/usr/lib/python3.7/tkinter/__init__.py", line 2023, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) _tkinter.TclError: no display name and no $DISPLAY environment variable)
  • 14:36, 8 December 2020 Abby talk contribs posted a new comment on P165 (Hi there, 1. We test the P165-B heatsink with X765/ X760 PoE. And also use the PoE four connectors for test. X765: https://raspberrypiwiki.com/X765 X760: https://raspberrypiwiki.com/X760 2. Could you please kindly provide the detail date of the "official POE hat"? It is better to attached some pictures, and we will do some test. Thanks in advance. Our Email: info@geekworm.com Regards, Geekworm Team)
  • 03:08, 8 December 2020 96.85.232.37 talk posted a new comment on X728-hardware (RPi 3B+: The X728 appears to be operating properly, including providing 5V to Pins 2 and 4. But when I plug the X728 into my RPi 3B+, the 5V pins immediately drop to 3.2V and the Pi will not boot. Any suggestions?)
  • 17:29, 7 December 2020 Xiali talk contribs posted a new comment on HDMI TO CSI-2 (Hi dear ,Yes ,it supports audio passthrough,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 16:21, 7 December 2020 52.56.99.60 talk posted a new comment on HDMI TO CSI-2 (Does this support audio passthrough?)
  • 15:43, 7 December 2020 Xiali talk contribs posted a new comment on X735 (Hi dear ,thanks for your effort,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:42, 7 December 2020 Xiali talk contribs posted a new comment on X825 (Hi dear ,The X825-C7 case is good ,and it is recommended to use the X728 instead of X725,by the way, There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 23:10, 6 December 2020 Heinemann talk contribs posted a new comment on X735 (For the RPi4, the software can also be installed under the operating system ubuntu-Mate-20.04.1 Beta2 64-bit from Paspberry.org for the Geekworm / Suptronics module X735 x730.sh the software can be installed functionally with a small trick. Some preparations are necessary for this: 1.) A full-upgrade of the system must be performed via the terminal. 2.) install wiringpi 3.) Install synaptic gpio-zero (to search under python3) 4.) In the root folder to open the directory /etc with administrat...)
  • 23:06, 6 December 2020 83.154.37.247 talk posted a new comment on UPS3 (Given that : - We use I2C to track the charging status and detect a power failure - We set the AUTO UPS switch to ON 1 - We detect a power failure 2 - Battery is now used and everything is alright 3 - We decide to shut down the RPi 4 - During the shutdown phasis, the power is back Q : What happens at 4? I think that actually, the RPi will just keep on shutting down normally but never powers ON again until a new power failure + power recovery cycle occurs. Which would be quite a problem...)
  • 04:37, 5 December 2020 181.238.219.145 talk posted a new comment on X825 (If using X825 + X725, wich case do you recommend?)
  • 11:50, 4 December 2020 Xiali talk contribs posted a new comment on X825 (Hi dear ,yes you can try with a 2-pin power switch,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 11:41, 4 December 2020 Xiali talk contribs posted a new comment on X829 (Hi dear ,sorry we don't get your point well ,but i think as long as the model of the product is correct, it doesn’t matter which country it is made in.by the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 11:39, 4 December 2020 Xiali talk contribs posted a new comment on X708 (Hi dear ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 05:10, 4 December 2020 84.17.60.217 talk posted a new comment on X708 (thx for the quick answer, i have ordered one locally keep up the good work at geekworm with hats and support)
  • 13:54, 3 December 2020 162.251.173.232 talk posted a new comment on X829 (X829 is it possible to buy one of these not made in China?)
  • 17:37, 1 December 2020 Xiali talk contribs posted a new comment on X708-Hardware (Hi dear ,please refer to X708-Software)
  • 17:37, 1 December 2020 Xiali talk contribs deleted comment #1228 on X708-Hardware
  • 17:37, 1 December 2020 Xiali talk contribs posted a new comment on X708-Hardware (Hi dear ,please refer to this url X708-Software)
  • 17:18, 1 December 2020 Xiali talk contribs posted a new comment on X708 (Hi dear ,tks for your message , 1.It doesn't matter whether the battery has a protection circuit or not, the most important thing is that the size of the battery can fit the battery holder. 2.It can fit the N300 case? 3. I2C address can not changeable? 4.There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 17:16, 1 December 2020 Xiali talk contribs posted a new comment on X708 (Hi dear ,The X708 can turn on/off fan from software but cann't control fan speed,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 17:05, 1 December 2020 Xiali talk contribs posted a new comment on X708 (It doesn't matter whether the battery has a protection circuit or not, the most important thing is that the size of the battery can fit the battery holder.)
  • 17:03, 1 December 2020 Xiali talk contribs posted a new comment on X708 (Hi dear , sorry for the mistakes ,In fact ,It doesn't matter whether the battery has a protection circuit or not, the most important thing is that the size of the battery can fit the battery holder.)
  • 15:45, 1 December 2020 37.163.69.245 talk posted a new comment on RPi UPSPack (The issue was solved? I've the same problem with RPI 3b+. Charger on but afterpp1 day and half... all shutdown with the battery empty :-() Tags: Mobile web edit, Mobile edit
  • 04:32, 1 December 2020 89.249.73.214 talk posted a new comment on X708 (correction: those 65.3 flat tops are all WITHOUT pcm)
  • 04:31, 1 December 2020 89.249.73.214 talk posted a new comment on X708 (The battery picture is wrong, it states to use battery with buildin pcm or pcb (protection circuit module/board) but the battery may not be longer the 65,3... the 67mm are the only ones with pcm / pcb, that whats the button on top is for. there are no batterys with pcm/pcb at the length of 65,3. those are all with pcb/pcm)
  • 23:42, 30 November 2020 95.45.79.181 talk posted a new comment on X708-Hardware (I would be interested to understand how to modify my set-up so that the fan comes under a GIPO pin as it is running constantly and that is painful on my poor ears)
  • 03:54, 30 November 2020 83.55.230.174 talk posted a new comment on Raspi UPS HAT Board (Some days ago, microswitch break out. I received new microswitch and soldered again. But,it continues without working. I tested and microswitch is well. Any solution, please? Before, I was very happy with Raspi UPS Hat. Worked very well, but now, I'm unable to switch off.)
  • 23:02, 29 November 2020 76.118.174.7 talk posted a new comment on X825 (Is there any ability or option to use this kit with a 2-pin power switch instead of 4-pin?)
  • 01:05, 29 November 2020 174.59.146.248 talk posted a new comment on X400 (Are the RCA jacks output or input for the X400 V3.0 DAC+AMP?)
  • 22:03, 28 November 2020 79.148.93.174 talk posted a new comment on P165 (You specify that P165B supports POE and actually you can access to the four connectors for this purpose. But it is NOT compatible with "official POE hat" from raspberry. Simply there is no enough place for the components of this PoE hat. I wish I knew it before. Which PoE hat is compatible with P165B?)
  • 21:49, 28 November 2020 218.231.162.164 talk posted a new comment on T300 (Please let me know hole layout?)
  • 16:43, 27 November 2020 185.211.162.186 talk posted a new comment on Raspi UPS HAT Board (This HAT board is completely USELESS as UPS: when you switch the main power off (simulating a black out), the battery starts discharging (ok), but when you switch the main power on again (e.g. black out is over), the battery keeps on discharging. For a correct recharge of the battery after the main power returns, you have to: 1 - safely shutdown the Raspberry 2 - manually switch off the UPS HAT button 3 - manually switch on the UPS HAT button In practice, the man must be in the loop each time...)
  • 12:17, 27 November 2020 Xiali talk contribs posted a new comment on X829 (Hi dear ,pls refer to this url: Does the X825/X855 support USB boot By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"