Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 00:36, 5 April 2024 78.193.210.122 talk posted a new comment on X306 (Is there a gpio pin that tells the raspberry if ups working on battery or power line (as in the x728 hat)?)
  • 16:35, 4 April 2024 86.26.156.109 talk posted a new comment on P173 (Please explain how to use the square copper plate (it is not shown in the above images)? I imagine it fits onto the silver cpu with thermal grease on both sides. However, do we still use the blue thermal pad or not and if we do which side of the copper does the thermal pad go?)
  • 15:09, 3 April 2024 Lisa talk contribs posted a new comment on X1202 (Hi,The usual 18650 batteries can be used, but please use high quality batteries.)
  • 14:56, 3 April 2024 Lisa talk contribs posted a new comment on X1003 (Hello，@Anonymous user #17 ；please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ and Try the following test it： 1/Run the lspci andlsblk command to check the NVMe SSD is recognized. 2/Add PCIE_PROBE=1 to the eeprom, (Run sudo rpi-eeprom-config --edit command, then add this line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot) 3/Update the bootloader firmware to the last verson, refer to How to update eeprom firmware, this is very important!!!And finally b...)
  • 14:44, 3 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello,Partition and format the new ssd, you can find more information on Google.)
  • 14:35, 3 April 2024 Lisa talk contribs posted a new comment on P580 (Hi,We have sent X1001 to the Amazon warehouse, but it may take some time for the warehouse to receive it. If you want to buy the X1002+P580; you can purchase this kit here.https://www.aliexpress.com/item/3256806322304169.html)
  • 12:21, 3 April 2024 Harry talk contribs posted a new comment on X735 Software (<span class="tb_red"><big>This tutorial is deprecated, see X735-script</big></span>)
  • 12:09, 3 April 2024 Harry talk contribs posted a new comment on X1200 (Simple control of charging via GPIO16: <pre>pinctrl set 16 op dh</pre> - stops charging <pre>pinctrl set 16 op dl</pre> - starts charging default is charging mode)
  • 12:07, 3 April 2024 Lisa talk contribs posted a new comment on LVDS Adapter (not support I2S signals input)
  • 12:04, 3 April 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hello,Answered your question hereXScript)
  • 21:53, 2 April 2024 185.65.135.156 talk posted a new comment on P580 (Been trying to buy the P580 and X1002 on Amazon. There is none of them in Amazon Sweden. Could instead buy the P579 (available on Amazon Sweden) but X1001 is not available.)
  • 01:57, 2 April 2024 99.64.244.60 talk posted a new comment on X1001 (Im installing a x1001 with a samsung ssd 980. Can you point me to instructions for partitioning & formatting on the x1001? Or should I mount it on USB and try to partition/format there?)
  • 01:50, 2 April 2024 171.60.170.59 talk posted a new comment on XScript (Create an alias yourself by running these two commands: echo "alias xoff='sudo /usr/local/bin/xSoft.sh 0 27'" >> ~/.bashrc source ~/.bashrc)
  • 01:30, 2 April 2024 192.150.10.203 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Bought X1002 & WD Green SN350 2TB Works just fine without any configuration. The only configuration change to enable PCI_gen3: # PCIe Gen3 dtparam=pciex1_gen=3 within: sudo nano /boot/firmware/config.txt # PCIe Gen3 dtparam=pciex1_gen=3 $ sudo lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0000:01:00.0 Non-Volatile memory controller: Sandisk Corp WD PC SN540 / Green SN350 NVMe SSD 1 TB (DRAM-less) 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidia...)
  • 00:42, 2 April 2024 192.77.184.26 talk posted a new comment on X1202 (Manual says "Note: the voltage range must be 3.00~4.10vdc." 18650's can go down to 2.5V per cell. Can the minimum be 2.5-2.7V or is 3.0V min a hardware limitation?)
  • 09:59, 1 April 2024 Harry talk contribs posted a new comment on X882 (Need more detail)
  • 09:57, 1 April 2024 103.192.225.113 talk posted a new comment on X882 (Can't power X882 from pi 4.)
  • 02:33, 1 April 2024 62.4.45.252 talk posted a new comment on X735-script (I have the same problem Traceback (most recent call last): File "/home/pi/x735-script/read_fan_speed.py", line 29, in <module> GPIO.add_event_detect(TACH, GPIO.FALLING, fell) RuntimeError: Failed to add edge detection)
  • 00:55, 1 April 2024 147.12.237.78 talk posted a new comment on X735-script (me too, need help)
  • 00:54, 1 April 2024 147.12.237.78 talk posted a new comment on X735 Software (I cant get it working on umbrelOS 1.0 for Raspberry Pi4 Please help)
  • 21:34, 31 March 2024 91.165.240.102 talk posted a new comment on X1003 (Hi, I confirm that Transcend PCIe SSD Gen3 x4 with MTE400S controller (I have with the 256Gb version), didnt't work. First of all, you have to push dtparam=pciex1_gen=3 in the config.txt configuration file. All other value (as dtparam=pciex1 or dtparam=pciex1_gen=2) can works, but with a very slow boot, a very slow login, and all commands are also very slow (it can takes several minutes !). In second hand, if you can boot and play with your RPi5, I always experienced an I/O error with this...)
  • 15:10, 30 March 2024 87.123.246.243 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Any chance, we can get support to make the MZDPI-display work with bookworm on a Pi Zero? -Thanks in advance!)
  • 14:18, 30 March 2024 24.108.66.145 talk posted a new comment on LVDS2 (I have a atgames legends ultimate. I can not get this to work . I only get flashing d1. I have tried checking the line sequence. HELP) Tags: Mobile web edit, Mobile edit
  • 13:05, 30 March 2024 47.229.60.33 talk posted a new comment on X1201 (Can the ups be powered by a power bank, while using the raspberry pi 5? Will it have any negative impact on performance as well?) Tags: Mobile web edit, Mobile edit
  • 20:19, 29 March 2024 160.86.98.146 talk posted a new comment on LVDS Adapter (I want to input I2S signals.)
  • 10:55, 29 March 2024 27.131.134.23 talk posted a new comment on X1200 (Yes, that will work temporarily, but you should likely be using 'pinctrl set 16 pu' to stop charging and 'pinctrl set 16 pd' to start charging.)
  • 09:10, 29 March 2024 167.60.109.45 talk posted a new comment on NASPi Gemini 2.5 (I'm having problems with the "xoff" command not working to shut down my computer. Could anyone solve it after updating the kernel?)
  • 21:33, 28 March 2024 212.154.53.198 talk posted a new comment on XScript (I have installed retropi to my pi4. Run sudo update and sudo upgrade first and then installed xscript. Fan controll works but xoff command doesnt work. Says command not found. Rebooted multiple times. I have to force close with power button. What can i do?)
  • 14:01, 28 March 2024 75.176.7.223 talk posted a new comment on X1200 (For anyone else looking for the method to control the charging: "pinctrl set 16 op dl" will ENABLE charging the 18650 cells. "pinctrl set 16 op dh" will DISABLE charging the 18650 cells.)
  • 13:57, 28 March 2024 24.32.12.59 talk posted a new comment on M400 (FFC Cables Blue Side faces the Brown Connectors. The Leads are on the Beige Side. So it will be Blue Side Faces Brown and White Facing Beige.)
  • 12:05, 28 March 2024 Lisa talk contribs deleted comment #4576 on X1003
  • 12:05, 28 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,Thanks for your feedback.We have contacted you via this email[m0gwai@arcor.de])
  • 12:03, 28 March 2024 Lisa talk contribs posted a new comment on X1200 (Hello,please refer toX1200 Hardware---Raspberry Pi GPIO used)
  • 11:45, 28 March 2024 Lisa talk contribs posted a new comment on P165 (Hi,thanks for your feedback.Are both fans failing? could you please let us know Where did you buy it and the order NO.? our email[support@geekworm.com])
  • 11:25, 28 March 2024 Lisa talk contribs posted a new comment on P165 (Hello,We will consider upgrading P165 to support Pi5. Now we have a pure copper heatsink,please refer to H502;)
  • 12:09, 27 March 2024 98.97.83.55 talk posted a new comment on P165 (I have purchased two of the P165-A's for my RPi4B's they worked perfectly for about three weeks, then the bearings on the fan failed and the fans make loud shriek/whine noises and turn much slower. :-( I hope you plan on finding a better component vendor for future versions.)
  • 12:06, 27 March 2024 167.56.84.197 talk posted a new comment on NASPi (The "xoff" command has stopped working from the terminal. Any solution?)
  • 05:55, 27 March 2024 64.89.255.201 talk posted a new comment on X306 (I see a lot of people knocking this board, i just want to say it's working great for me, I put virtual here server on a pi zero WH and it works amazingly. I can take my portable usb hub out to the garage and plug my laser cutter into it, then go back to my office and burn for a couple hours only using half battery or so. I didn't do anything special.)
  • 02:52, 27 March 2024 75.176.7.223 talk posted a new comment on X1200 (It mentions above that "Battery charging control can be managed via GPIO". I cannot find any information on how to do this, does anyone have information about this? It would be nice if I could stop charging the cells at a configurable percentage.)
  • 04:29, 26 March 2024 95.223.226.235 talk posted a new comment on X1003 (the config of the pcie controler might be bad, as I can read there: [ 1.692983] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: [ 1.700455] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] [ 1.710004] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 [ 1.718762] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 [ 1.727519] brcm-pcie 1000110000.pcie: IB MEM 0x0000...)
  • 04:09, 26 March 2024 95.223.226.235 talk posted a new comment on X1003 (I bought the pi5 with a pimoroni base board, and a samsung 980 Pro 1 TB and it does NOT work! I found out that it musst be the pimoroni board, I tried out the Nvme ssd works on my pc without, and there it works. I read at the logs,that the boad tried to log on st the pie, but then it does not. m0gwai@liquid-server:~ $ lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge m0gwai@liquid-se...)
  • 00:36, 26 March 2024 Harry talk contribs posted a new comment on X735-script (Refer to https://github.com/geekworm-com/x729-script/blob/main/sample/plsd-gpiod.py Please use ```libgpiod``` library and don't use RPi.GPIO anymore. https://github.com/raspberrypi/linux/issues/6037)
  • 00:34, 26 March 2024 Harry talk contribs deleted comment #4560 on X735-script
  • 00:34, 26 March 2024 Harry talk contribs deleted comment #4559 on X735-script
  • 18:54, 25 March 2024 Lisa talk contribs posted a new comment on X650 (yes.)
  • 17:36, 25 March 2024 Lisa talk contribs posted a new comment on X1200 (There is no need to do this as the Pi5 can be powered via the pogo pins.)
  • 17:34, 25 March 2024 Lisa talk contribs posted a new comment on X1200 (Not support Pi4, because it power Pi5 via [pogo pin], you can use X-UPS1 or X703)
  • 17:14, 25 March 2024 Lisa talk contribs posted a new comment on X1001 (Please try to remove [dtparam=pciex1_gen=3])
  • 17:05, 25 March 2024 Lisa talk contribs posted a new comment on X-C1 Software (The script is not tested VMware ESXI ARM operating system. To make the 3pin PWM cooling fan running, please remove/pull out the yellow cable if you use X-C1 V1.3 version. Remove the jumper cap on "Fan FS" PIN of X-C1 V2.0 to let the fan running at full speed.)
  • 17:00, 25 March 2024 Lisa talk contribs posted a new comment on C790 (the same with Raspberry Pi4)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"