Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 15:34, 3 December 2021 Abby talk contribs posted a new comment on C235 (Hi, Thanks for your message. 1. The main heat is from CPU, and the heat dissipation of other components is very small, so it is not necessary to put a heat sink on all the components. 2. If the heat dissipation is not achieve, pls check whether the heatsink had touched CPU. Due to production deviation, a few heatsink may have errors and need to use 2 heat sink pads. If you encounter this problem, please use 2pcs thermal pads and stack them on the CPU of the CM4 module. 3. Pls remember to...)
  • 14:52, 3 December 2021 Abby talk contribs posted a new comment on C235 (Hi， The heatsink now equipped with 2pcs thermal pads. If you encounter this problem, please use 2pcs thermal pads and stack them on the CPU of the CM4 module. Pls remember to remove the protective film. Did you get the thermal pads? Please contact the customer service of the corresponding website and the customer service will help you. Regards, Abby / Geekworm)
  • 07:27, 3 December 2021 154.3.40.6 talk posted a new comment on X708-Software (Hello, I installed the x708 software as indicated, on a Raspberry Pi 4. I got the following error, after the following command. Is there any way to fix this? Thanks pi@rachel:~ $ python x708bat.py ****************** Traceback (most recent call last): File "x708bat.py", line 25, in <module> print ("Voltage:%5.2fV" % readVoltage(bus)) File "x708bat.py", line 9, in readVoltage read = bus.read_word_data(address, 2) IOError: [Errno 121] Remote I/O error)
  • 07:03, 3 December 2021 31.19.64.4 talk posted a new comment on X728-Software (How to force a shutdown after power disconnect for example after 5 minutes?)
  • 02:38, 3 December 2021 176.67.86.153 talk posted a new comment on C235 (This heat sink seems not to be suitable for raspberry CM4 modules, because it is not designed to cool all hot components! Namely, your heat sink has touch only to 2 of 4 components that can get very hot. The 2 not cooled ones will break within a short time with your heat sink!!!)
  • 05:52, 2 December 2021 192.173.161.216 talk posted a new comment on X728 (*WARNING* This hardware is not yet supported by BULLSEYE released 10/30/21. python packages needed to drive the software are not available at this time. Do not upgrade to BULLSEYE until you are certain all python packages are updated.)
  • 00:09, 2 December 2021 185.47.105.172 talk posted a new comment on X735 V2.5 Software (Many thanks, all working OK for me - very pleased with the case.)
  • 16:02, 1 December 2021 178.254.120.19 talk posted a new comment on X-C1 Software (Hi, @user#28: Did you try the Unbuntu scripts proposed here in this Wiki on your Home Assistant PI? Was this not working? I just bought this board also. I am setting up this board fright now, and was looking at this WiKi to now implement the Temperature monitoring on this XC-1 board to have the fan monitor the temperature. I think this board is perfekt for any Smarthome solution based on Raspberry PI ...)
  • 14:38, 1 December 2021 71.125.44.25 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (When will this be available again?)
  • 14:32, 1 December 2021 68.227.235.171 talk posted a new comment on UPS3 (If I supply a fixed, constant 12V to the USB-C connector will this cause any battery over charging or more wasted power/heat in the UPS3 board? Is there an advantage of 5V versus 12V power in?)
  • 11:18, 30 November 2021 Lisa talk contribs posted a new comment on X735 V2.5 Software (Hi，You don't need to install 'python-smbus' in the new version, please ignore it. But it's needed to install'python-smbus' in the previous version, so we keep it.)
  • 11:11, 30 November 2021 Harry talk contribs posted a new comment on X708-Software (I have just modify the install.sh for the python 3 because of print function. You can update the install.sh, run the command 'git pull', then run './uninstall.sh' to uninstall, then reinstall it.)
  • 11:04, 30 November 2021 Harry talk contribs posted a new comment on X708-Software (The syntax of print in python2 and python3 is different, so there will be this error, you can run the following command: python2 x708bat.py or python x708bat.py)
  • 10:59, 30 November 2021 Harry talk contribs posted a new comment on X735 V2.5 Software (Please ignore the message.)
  • 16:11, 29 November 2021 Lisa talk contribs posted a new comment on T208-Software (Hi，please send us some pictures， email 【support@geekworm.com】，and please . tell us your order NO.)
  • 15:48, 29 November 2021 Lisa talk contribs posted a new comment on X829 (Hi，X829-C1 metal case has been discontinued)
  • 12:53, 29 November 2021 69.139.34.149 talk posted a new comment on T208-Software (Not working Traceback (most recent call last): File "Pld.py", line 13, in <module> GPIO.add_event_detect(4, GPIO.BOTH, callback=my_callback) File "/usr/lib/python2.7/dist-packages/Jetson/GPIO/gpio.py", line 500, in add_event_detect raise RuntimeError("You must setup() the GPIO channel as an input " RuntimeError: You must setup() the GPIO channel as an input first fixme)
  • 07:20, 28 November 2021 46.33.143.84 talk posted a new comment on X735 V2.5 Software (I am trying to install on the latest version of Raspbian - Bullseye - getting an error on the first line of the install 'sudo apt-get install -y python-smbus python' Reading package lists... Done Building dependency tree... Done Reading state information... Done Note, selecting 'python-is-python2' instead of 'python' Package python-smbus is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another so...)
  • 21:17, 27 November 2021 84.112.8.15 talk posted a new comment on X708-Software (There are some problems in the python code with the actully raspberry pi os (raspbian). If i want to use ``` sudo python3 x708bat.py ``` The system calls: ``` File "/home/pi/x708bat.py", line 24 print "******************" ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print("******************")? ``` If I change it to print(*******) i had the follow error: ``` File "/home/pi/x708bat.py", line 25 print "Voltage:%5.2fV" % readVoltage(bus)...)
  • 17:36, 26 November 2021 90.30.212.255 talk posted a new comment on X829 (Which case can be used to pack this kit ?)
  • 22:06, 25 November 2021 124.217.188.126 talk posted a new comment on X708-Hardware (Hi. I have just purchased x708v1.2. How do i get on ASD function? The Step 9 is not detailed enough and i need a step-by-step solution. Where do i put the code? In Terminal? How do you have the script run automatically after starting up?)
  • 19:00, 25 November 2021 168.0.109.241 talk posted a new comment on X708-Software (sudo raspi-config select "3 Interface Options" and hit enter select "P5 I2C" and hit enter then go to finish and reboot.)
  • 18:09, 25 November 2021 168.0.109.241 talk posted a new comment on X708-Software (I have the same issue. Geekworm team, please help us " $ sudo python x708bat.py Traceback (most recent call last): File "x708bat.py", line 21, in <module> bus = smbus.SMBus(1) # 0 = /dev/i2c-0 (port I2C0), 1 = /dev/i2c-1 (port I2C1) IOError: [Errno 2] No such file or directory ")
  • 12:17, 24 November 2021 Lisa talk contribs posted a new comment on X883 (Hi，Thank you for your feedback, we are also collecting more user needs, and will consider the development of supporting Metal Case.)
  • 12:13, 24 November 2021 Lisa talk contribs posted a new comment on Armor Case B (Hi，It's not anodized， if you want a anodized case，please refer N300)
  • 12:02, 24 November 2021 Lisa talk contribs posted a new comment on X703 (That's what the UPS expansion board does, but only if the 18650 battery is available.)
  • 05:56, 24 November 2021 46.98.189.186 talk posted a new comment on X708-Software (just replace to input() for python3)
  • 00:48, 24 November 2021 76.67.37.95 talk posted a new comment on Armor Case B (is the case painted or anodized?)
  • 22:18, 23 November 2021 172.58.221.112 talk posted a new comment on X883 (Please release a case for this board or bring back the C1 for the older board! It's the only thing stopping me from buying all of the parts from you for the nas/set-top computer I'm working on. My requirements are: dual ssd, power management board w/ Uninterrupted Power Supply & button operated safe shutdown support, and a really good fan (preferably an Ice Tower style cooling system) to keep it all cool. You guys have 90% of the parts I need, the only thing missing is a case to keep it all s...) Tags: Mobile web edit, Mobile edit
  • 02:41, 23 November 2021 71.224.214.127 talk posted a new comment on X703 (If mains power from charging adapter disappears, for example because of a power outage, will X703 take over powering the Raspberry PI without shutdown/reboot?)
  • 14:15, 22 November 2021 Lisa talk contribs posted a new comment on X708 (Hello，No，X708 Terminal Battery Voltage : 4.24V; please refer：FAQ 4: Which lithium battery can be used:)
  • 16:35, 20 November 2021 112.207.134.196 talk posted a new comment on X708 (Hello, I have this and currently using 18650 lithium-ion 3.7v cells. Is it possible to use 18650 3.2v lifepo4 cells?)
  • 15:16, 20 November 2021 31.16.4.44 talk posted a new comment on X-C1 Software (Hi. Amy update on a possible Home Assistant support?) Tags: Mobile web edit, Mobile edit
  • 04:12, 20 November 2021 74.69.252.57 talk posted a new comment on Robot Expansion Board (Yes. However you would need either analog to digital converter with a voltage module. I’m yet to build one myself, I have the parts but in theory that’s how I see it working on the pi. Hope helps you in anyway. :)) Tags: Mobile web edit, Mobile edit
  • 14:23, 18 November 2021 Lisa talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (If you don’t have an oscilloscope, or you can try to use a multimeter to measure the voltage for a simple judgment)
  • 12:35, 18 November 2021 Lisa talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi， It is best to have an oscilloscope to view the waveform. But please make sure that the system settings are correct first, that is the 【config.txt file】)
  • 04:55, 18 November 2021 216.170.240.213 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi, I've run through what broken instructions I was able to find and the screen backlight comes on, but no display. I've looked through the comments and noticed an answer asking "check the pins 3, 5, 27, and 28 of the header." What am I looking for? What should they show? Do they need to be remapped?)
  • 11:53, 17 November 2021 Lisa talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello，It may not be a hardware problem.The screen is 65k colors, may be a color conversion problem.)
  • 10:47, 17 November 2021 Lisa talk contribs posted a new comment on T208 (Hi，T208 can work with 1/2/3/4/5/6 18650 lithium Ion batteries.It's depends on the load.And not support RTC function .)
  • 10:38, 17 November 2021 Lisa talk contribs posted a new comment on T300-C3 (Hi，Because of the renewal of the motherboard design, we had to cancel the TF interface. Please refer to FAQ. hope to get your understanding.)
  • 04:10, 17 November 2021 65.188.91.140 talk posted a new comment on T208 (How many batteries are *required?" I see slots for 6. It isn't clear that if it is 6 groups of one, 3 groups of 2, 2 groups of 3, 1 group of 6. I only need about 30s of full-power backup, enough to flush all file caches.)
  • 02:43, 17 November 2021 65.188.91.140 talk posted a new comment on T300-C3 (Other cases have an extension board for the TF card, but having 2 spring-loaded latches makes using them a real pain.)
  • 02:08, 17 November 2021 65.188.91.140 talk posted a new comment on T208 (RTC = real-time clock on the Jetson Nano)
  • 00:02, 17 November 2021 96.45.232.208 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi yes I had the blue tint on my screen so I set the GPIO as stated above and that got rid of the blue tint but now my color scheme seems to be off I watch video on my pi and it shows on like peoples faces like light green tint but the neck and other parts seem to render normal skin color also noticed some other colors are off. Ive checked all the solder points and are all solid. Is it a gpio or dpi or overlay possibly?)
  • 23:39, 16 November 2021 65.188.91.140 talk posted a new comment on T208 (Does this UPS power the RTC in the off state? My end-users would love that!)
  • 15:24, 16 November 2021 Lisa talk contribs posted a new comment on X825-C8 (Hi，Does the switch not work? Please check the wiring of the switch is correct first.please refer PSW19)
  • 15:20, 16 November 2021 Lisa talk contribs posted a new comment on X728 (Hi，1/for the BEEPING: X728 V2.1 add a buzzer controlled by CPIO 20; please plug in the power supply to the X728 without raspberry pi , and turn it on to check if it is still calling; if not, please check GPIO 20 is occupied. 2/[AC fail led is blinking]: We need to troubleshoot whether it is a line problem. Could you send us a video to check it? <support@geekworm.com> and please tell us your order NO.)
  • 04:38, 16 November 2021 173.14.57.145 talk posted a new comment on X825-C8 (Well I like this case and am using the option 1 configuration. My issue is when I want to shut it down the OS does not turn off the rest of the hardware and I have to unplug it to make the on switch work. I am running Kali on it if that makes any difference.)
  • 21:16, 15 November 2021 51.6.181.168 talk posted a new comment on X728 (Hi, my AC fail led is blinking while my usbc is connected to the x782 V2.1. Any reason? Also another x782 V2.1. is just continuously beeping while the batteries are connected. Why is that?)
  • 16:58, 15 November 2021 Lisa talk contribs posted a new comment on X-C1 Software (Hello，please send us 【Pop Os】link and let us try to test. Because there are too many operating systems for the Raspberry Pi, we cannot provide installation scripts for all systems, so we strongly recommend buying the NASPi Lite version if you are using a third-party system.)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"