Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 05:30, 28 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (I have to ad dtparam=i2c_arm=on dtparam=i2c1=on in config.txt i2c activated in raspi-conf)
  • 05:11, 28 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (root@raspberrypi:/home/pi# python2 x750ups.py ****************** Traceback (most recent call last): File "x750ups.py", line 31, in <module> print "Voltage:%5.2fV" % readVoltage(bus) File "x750ups.py", line 11, in readVoltage read = bus.read_word_data(address, 2) IOError: [Errno 110] Connection timed out and: sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
  • 02:19, 28 January 2021 196.188.243.168 talk posted a new comment on HDMI TO CSI-2 (Should I unplug the cable after connecting) Tags: Mobile web edit, Mobile edit
  • 20:57, 27 January 2021 24.137.145.128 talk posted a new comment on LVDS Adapter (How do I close the motherboard signal spreading function and turn it on the FREERUN fixed frequency function?)
  • 18:51, 27 January 2021 46.34.228.79 talk posted a new comment on X20 HiFi (hi, how to switch between USB TO I2S / SPDIF / Coaxial ?)
  • 10:25, 26 January 2021 108.30.122.153 talk posted a new comment on HDMI TO CSI-2 (I'm trying to use the HDMI card with OctoPi and a GoPro Hero3 but getting this error: pi@octopi:~ $ raspivid -p -f The driver for the TC358743 HDMI to CSI2 chip you are using is NOT supported. They were written for a demo purposes only, and are in the firmware on an as-is basis and therefore requests for support or changes will not be acted on. mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera co...)
  • 03:00, 26 January 2021 109.86.19.109 talk posted a new comment on X835 (What OS should I use to make x835 work? Right now I'm using ubuntu serve 20.10 and cannot see any storage devices connected to my rpi 4. I was using lsblk and sudo fdisk -l to check)
  • 03:37, 25 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (Hey, it seems, the volt percentage command doesn't work. This is my cli output: root@raspberrypi:/home/pi# python x750ups.py File "x750ups.py", line 30 print "******************" ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print("******************")? please help)
  • 03:30, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Can someone provide a working RetroPie image for the Pi Zero W with the MZP280V00BR screen? Using auto-install script I run into the gpios_property error and don't know if it is fixable.)
  • 03:06, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (This is on Raspbian 9 stretch with kernel 4.14)
  • 03:02, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Running the autoinstall script gives me FATAL ERROR "Unrecognized check name gpios_property" in the end. Touch function works after running the acript, but display output does not work. How to fix?)
  • 01:25, 24 January 2021 131.147.76.85 talk posted a new comment on X829 (I connected an SSD in a usap compatible case to the USB port on my X829, but it won't connect via USB3.0(5G). The SSD connected USB2 (480M). I checked with lsusb command, but USB port on X829 is USB2, not USB3.0. Is my X829 broken? Please help me to confirm this.)
  • 01:12, 24 January 2021 131.147.76.85 talk posted a new comment on X735 (What does "safe shutdown" mean? I checked syslog, but the Linux shutdown sequence is not executed and the power turns off suddenly. Please let me know in what sense it is "safe". Thank you for your time.)
  • 00:23, 24 January 2021 79.159.194.99 talk posted a new comment on X725 (The X725 board does not start the RPi 4 when the power is restored (via micro usb) if the 18650 cells are mounted. However, if the cells are not present, it does switch on the RPi. Is there any way to get this auto on with the cells connected? I already have the pin header for "AUTO-ON" shorted.)
  • 11:58, 23 January 2021 35.134.21.24 talk posted a new comment on X728 (Im experiencing an issue with starting up this UPS.I have tried charging my batteries with an efest battery pack charger and in the hat itself but when i try to power on the board it shuts down within 3 seconds. I have followed the troubleshooting tips above but i have yet to fin a problem. The Power light turns on and the 5v power led does as well, but then they both shut off. Id like to assume my board isnt broken and my batteries work, so is there a schema or effective way to test points w...)
  • 09:16, 23 January 2021 137.175.181.46 talk posted a new comment on P173 (Awesome product that keeps temperature way down! Easy to install and assemble! Your product rocks!!!)
  • 16:41, 22 January 2021 Cindy talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi, yes, this screen is for Raspberry Pi Zero /W use.)
  • 16:39, 22 January 2021 Cindy talk contribs posted a new comment on X708-A1 (Hi friend, Yes, of course. You can use less than 8 batteries.)
  • 16:37, 22 January 2021 Cindy talk contribs posted a new comment on X862 (Hello friend, Do you try to format the SSD before use? Could you please attach your order number and some more details to contact us at support@geekworm.com? We will help you with this. Best regards, Cindy/Geekworm)
  • 16:27, 22 January 2021 Cindy talk contribs posted a new comment on X750 (Hi friend, Really sorry, there is no design case for X750, also X750 is not compatible with the X857-C1 case, please understand.)
  • 16:26, 22 January 2021 Cindy talk contribs posted a new comment on X829 (Hi friend, Could you please let us know your order number? Would you mind tell us why you need to know if it is the latest version? Thanks!)
  • 03:20, 21 January 2021 91.65.122.71 talk posted a new comment on X750 (Awesome finding! Looks like it is working like you wrote. Now I can show a corresponding icon in the display and/or add a LED as charging indicator.)
  • 19:11, 20 January 2021 131.147.76.85 talk posted a new comment on X829 (Add following to "/var/lib/smartmontools/drivedb/drivedb.h" ------------------------------------------------------------ { "USB: ; ASMedia", "0x174c:0x0829", "", "", "-d sat" },)
  • 17:00, 20 January 2021 131.147.76.85 talk posted a new comment on X829 (sudo smartctl -i -d sat /dev/sdX)
  • 06:54, 20 January 2021 2.230.84.207 talk posted a new comment on X705 (I used 2 Samsung 30Q batteries. Headless rasberry with only hostap (wifi access point) and Huawei E169 3G dongle lasts 7h without power adapter.)
  • 18:07, 19 January 2021 110.54.247.19 talk posted a new comment on X750 (What is the casing for X750? Is it compatible with casing X857-C1?)
  • 15:11, 19 January 2021 195.206.183.62 talk posted a new comment on X829 (how to access smartctl information. I keep getting "unknown usb bridge".)
  • 17:14, 18 January 2021 82.75.181.168 talk posted a new comment on X728-Software (Hi Pmsr, the Voltage you see is coming from the batteries. It is a very usefull indication of the quality of them. 4.2V is the fully charged value. 3.7V is the steady value over a relative long periode without charging.)
  • 03:01, 18 January 2021 37.73.93.230 talk posted a new comment on X725 (The same problem) Tags: Mobile web edit, Mobile edit
  • 14:05, 15 January 2021 96.29.128.102 talk posted a new comment on HDMI TO CSI-2 (Can you send the raspberry pi output to the camera? I tried this and am getting errors even though video 0 is showing up. I am using a raspberry pi 4 with two hdmi outputs so I am sending one back into the camera. I know this sounds wierd but I have a reason to do this. I was just wondering if anyone else has tried it and got it to work.)
  • 05:59, 15 January 2021 68.32.77.220 talk posted a new comment on Does the X825/X855 support USB boot (Is USB Boot available under Ubuntu Server 20.10?)
  • 22:34, 14 January 2021 60.64.31.51 talk posted a new comment on X862 (Bought in 2021 and does not work with functioning SSD. I was using previously M2 to USB adapter with the same SSD and it works. X862 does not work and now I am trying to find a solution with the good folks on raspberrypi.org forums.. Maybe quirks need to be applied)
  • 22:29, 13 January 2021 151.18.28.211 talk posted a new comment on X705 (Hi, i see in the instructions that is raccomanded NOT to use the USB power output of this HAT to power the raspberry. Why? It does provide 2.5A, that should be enough..) Tags: Mobile web edit, Mobile edit
  • 03:23, 13 January 2021 31.18.190.64 talk posted a new comment on X708-A1 (Does the X708-A1 work with less than 8 Batterys?)
  • 02:15, 13 January 2021 80.104.52.65 talk posted a new comment on X825 (for all boards produced before July 1st 2020, is it possible to have retrofit with new board (to gain for UASP support)?)
  • 01:32, 13 January 2021 131.147.76.85 talk posted a new comment on X829 (Is my x829 a later version? (JMS583 IC version?) Below is the result of lsusb. $ lsusb Bus 002 Device 004: ID 174c:0829 ASMedia Technology Inc. Bus 002 Device 003: ID 174c:0829 ASMedia Technology Inc. Bus 002 Device 002: ID 05e3:0620 Genesys Logic, Inc. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0511:083f N'Able (DataBook) Technologies, Inc. Bus 001 Device 005: ID 0bc2:3322 Seagate RSS LLC SRD0NF2 [Expansion Desktop Drive] Bus 001 Device 006: ID...)
  • 17:08, 12 January 2021 71.195.218.225 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Same thing happens to me on PI 4)
  • 17:05, 12 January 2021 71.195.218.225 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (This does not work on a Raspberry Pi 4)
  • 04:30, 10 January 2021 95.10.235.125 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Is there any unused GPIO pins on version C?)
  • 17:49, 8 January 2021 Cindy talk contribs posted a new comment on X872 (Hi friend, Could you please use a usb3.0 A Male to A-Male Data cable to replace the USB connector to test?)
  • 17:47, 8 January 2021 Cindy talk contribs posted a new comment on X705 (Hi, the flat 18650 batteries is more easy to pulg in.)
  • 04:07, 8 January 2021 2.230.82.36 talk posted a new comment on X705 (Hello, which shape of 18650 battery is needed? i understand it should be WITHOUT BUILT-IN PROTECTION CIRCUIT, but i see there are 18650 batteries that are flat or with buttons or flaps on the edge. Which one is good? Thanks)
  • 23:44, 7 January 2021 196.3.50.247 talk posted a new comment on X870 (Hello Cindy, thank you - I have spotted this - so it might be a good option. Thank you ! Ralf)
  • 20:13, 7 January 2021 217.120.219.24 talk posted a new comment on X872 (Hi, I am using a X872 V1.1 in combination with a Kingston A2000 1TB NVM drive on a Pi4 8GB. For a while the conbination worked fine but after two weeks or so the PI did not boot after a power off. It look that the connection is not stable sometimes the drive shows up in an lsusb and some time it's not. Any tips?)
  • 18:38, 7 January 2021 Cindy talk contribs posted a new comment on X728-hardware (Hi friend, The pin out is the same with Raspberry Pi 4, please refer to raspberry PI 4 PIN OUT,thanks!)
  • 18:37, 7 January 2021 Cindy talk contribs posted a new comment on X870 (Hi friend, Really sorry, the case for X870 has been disconinued, maybe you can use a HAT size acryic case: https://geekworm.com/products/raspberry-pi-universal-stackable-hat-size-acrylic-case)
  • 06:55, 7 January 2021 71.120.11.239 talk posted a new comment on X710 (On the XH2.54 power input header, which pin should be DC-in and which should be ground? Same for the barrel connector?) Tags: Mobile web edit, Mobile edit
  • 05:39, 7 January 2021 87.157.255.66 talk posted a new comment on X870 (Hello, good evening, I have a X870 board attached to a Raspberry Pi 4B, not using any power management board, can you recommend a suitable case ? ( I also would need to have access to the camera connector ) Thanks Ralf)
  • 01:01, 7 January 2021 83.81.183.238 talk posted a new comment on X728-hardware (Hi, I have the 728 for some time now and it is a great board. Now I want to connect an extension to the 40 pin GPIO pins on top, but there is no print on the component side of the unit. So, looking from above, which prin is pin 1?)
  • 00:07, 6 January 2021 212.159.109.130 talk posted a new comment on USB 16x2 RGB LCD (Can anyone solve this error Traceback (most recent call last): File "/usr/local/bin/mpdlcd", line 7, in <module> from mpdlcd import cli File "/usr/local/lib/python2.7/dist-packages/mpdlcd/cli.py", line 5, in <module> import configparser ImportError: No module named configparser)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"