Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 10:54, 7 December 2022 Lisa talk contribs performed unknown action "comments/add" on X729 (Hi，There is no METAL CASE for X729.)
• 10:54, 7 December 2022 Lisa talk contribs performed unknown action "comments/delete" on X729
• 10:48, 7 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (The operating system is Raspberry PI OS, not UPS. If you upgrade it, reinstall the UPS script to test.)
• 10:43, 7 December 2022 Lisa talk contribs performed unknown action "comments/add" on X729 (NOTE:lthe 2pin red and black wire of X708-A1/X728-A2 is wrong in polarity with X729 BAT XH2.54 port.)
• 16:55, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728-hardware (Hi,1/Please unplug the batteries, leave it for a few minutes and then test again; 2/Have you upgraded the OS? If you have upgraded the OS, it is recommended to UNINTALL first and then reinstall.)
• 16:52, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 script *[https://wiki.geekworm.com/File:X728_SAFE_SHUTDOWN.png])
• 16:49, 6 December 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:48, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 scriptFile:X728 SAFE SHUTDOWN.png)
• 16:46, 6 December 2022 Lisa talk contribs performed unknown action "comments/delete" on X728
• 16:45, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Yes，you can refer V2.1 scriptX728 SAFE SHUTDOWN.png)
• 16:45, 6 December 2022 Lisa talk contribs created page File:X728 SAFE SHUTDOWN.png
• 16:45, 6 December 2022 Lisa talk contribs uploaded File:X728 SAFE SHUTDOWN.png
• 15:59, 6 December 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (please refer toX728-hardware#Pins and GPIO used)
• 09:42, 5 December 2022 Lisa talk contribs performed unknown action "comments/add" on X729 (Hi，There is no METAL CASE for X829.)
• 18:16, 3 December 2022 Lisa talk contribs performed unknown action "comments/add" on X825 V2.0 (If you want to use it with Pi3, don't need to remove the pogo pins, you can use a 2pin cable to power the Raspberry Pi, but you can't use the USB3.0 connector, only can use a USB3.0 cable.)
• 15:03, 30 November 2022 Lisa talk contribs performed unknown action "comments/add" on X735 Hardware (If X735+Raspberry Pi is used together, the fan will spin after the script runs.)
• 15:01, 30 November 2022 Lisa talk contribs performed unknown action "comments/add" on X857-C3 (X735 V2.5 has two switch interfaces, momentary switch and Latching switch. Please check that the correct interface is connected. If it still doesn't work, please contact us ： support@geekworm.com)
• 15:27, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (There are many open source systems for linux. Sorry,we have not tested all of them.)
• 15:09, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on X735 Hardware (1/Have you used the AUTO ON function? 2/Please check that the wiring of the switch is correct.)
• 15:02, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on X857-C3 (Please check if the wiring is correct? blue wire for‘+ ’；white wire for‘-’)
• 12:42, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on X729 (yes，X729 compatible with P165-A/B，but you need a 40 pin Female Header and longer Spacers to fix it)
• 12:38, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on PiKVM-A3 (Yes，you need a TF card. It is recommended that you learn more about PiKVM before considering purchasing it.)
• 12:31, 28 November 2022 Lisa talk contribs performed unknown action "comments/add" on X729 (Yes， it supports X708-A1 battery holder via（BAT: XH2.54 Port to External Battery）. But please pay attention to the correct wiring method, if it is reversed, it will burn the X729.)
• 10:19, 24 November 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini (Sorry, no sample scripts for OLED here. You can program it yourself.)
• 18:53, 23 November 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini (Hi，This depends on the script you programmed.You can also refer here：How to enable OLED display)
• 18:18, 22 November 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (Hi，The X-C1's PWM fan does not support reading speed. It only has three wires (3 pins), and the X735 fan has 4 wires.)
• 15:27, 22 November 2022 Lisa talk contribs performed unknown action "comments/add" on P173 (Hi，You can cut it off if you want, but please be careful when using tools.)
• 15:24, 22 November 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini (Hi，X882 board can install a 0.96 inch OLED Shield， but the metal case cannot be used unless you lead it out with a Dupont wire.)
• 10:38, 17 November 2022 Lisa talk contribs performed unknown action "comments/add" on X728 (Hi，The x728 supports the connection of a 4pin momentary switch, but the safe shutdown function requires an installation script to be realized. Please refer to here for the switch：X728-hardware#Connector for External Power Switch)
• 10:43, 7 November 2022 Lisa talk contribs performed unknown action "comments/add" on P165 (Hi, We haven't tested it, but the HiFiBerry case may not support P165; Maybe you can use P165 without that case.)
• 10:12, 7 November 2022 Lisa talk contribs performed unknown action "comments/add" on X-C1 Software (Hi， Sorry, it doesn't support Home Assitant yet.)
• 11:09, 4 November 2022 Lisa talk contribs performed unknown action "comments/add" on CM4 to CM3 Adapter (Hello， The Raspberry PI logo shows that it can be displayed. There should be a configuration problem. CM3 has only one video output interface, while Raspberry PI CM4 has two output interfaces. There should be a problem with the configuration of the system desktop display. Please check the configuration. Or try reinstalling with the official system to test it out.)
• 10:18, 4 November 2022 Lisa talk contribs performed unknown action "comments/add" on X880 (Hi，It depends on the system you use. Maybe you can find the answer on google.Thanks~)
• 17:32, 1 November 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi Gemini (You can use 4TB HDD,and NASPi Gemini support Max 16mm thickness 2.5" HDD/SSD; The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，so you can choose the SSD/HDD according to your requirement.)
• 10:17, 1 November 2022 Lisa talk contribs performed unknown action "comments/add" on X735 V2.1 Hardware (Hi, please refer X735#Document --for Version 2.1 or more low version, and please uninstall the X735 script and install it again.)
• 17:59, 31 October 2022 Lisa talk contribs performed unknown action "comments/add" on X735 (Hi， please refer to X735 V2.1 Hardware---remove both 'L-SW'&‘Auto On’ Jumpers when using momentary switch)
• 11:59, 31 October 2022 Lisa talk contribs performed unknown action "comments/add" on X825 V2.0 ([barrel connector]--DC 5V Power IN of X825 board? If you power the X825 alone, it is theoretically possible.)
• 11:10, 31 October 2022 Lisa talk contribs performed unknown action "comments/add" on X862 V2.0 (Hi， X862 board does not support disabled LEDs; You can cover it with black tape)
• 10:48, 31 October 2022 Lisa talk contribs performed unknown action "comments/add" on X735 (Hi， please refer to X735 Hardware x735 v2.5 Pin Header instraction)
• 10:49, 28 October 2022 Lisa talk contribs performed unknown action "comments/add" on X825 V2.0 (Hi，Pi4 powers X825 board via test pin. If you isolate the test pins, x825+ SSDS will fail to obtain sufficient power or will fail to identify the ssd.)
• 09:43, 26 October 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi (Hi, Thanks for your feedback. The NASPi's fan is also a silent fan. We think it is the case that there are not enough ventilation holes, we will increase the fan holes in the next version to improve this problem.)
• 14:40, 24 October 2022 Lisa talk contribs performed unknown action "comments/add" on X735 (Sorry，This setting is not supported at this time.)
• 15:40, 21 October 2022 Lisa talk contribs performed unknown action "comments/add" on X862 V2.0 (Hi， Yes，you can use the USB 3.0 A-Male to A-Male Data cable.)
• 10:06, 20 October 2022 Lisa talk contribs performed unknown action "comments/add" on NASPi (Hi， Yes， you can contact it to 5V OUT with a 2pin cable.)
• 16:37, 17 October 2022 Lisa talk contribs performed unknown action "comments/add" on X880 (Hi， Yes， you can use the CLEAR RAID mode (PM, factory default setup) and not format the hdds.Plese back up your data to avoid unexpected situations.Thanks.)
• 15:18, 17 October 2022 Lisa talk contribs performed unknown action "comments/add" on X708-Hardware (Hi， amazon.de/gp/product/B07KCCLGXJ----Operating voltage 12 Volts； X708 UPS output is 5V)
• 11:28, 14 October 2022 Lisa talk contribs performed unknown action "comments/add" on X708-Software (Hi Please check whether the positive and negative poles of the battery are correctly installed, if you use 18650 batteries. Replace other batteries to test.)
• 11:16, 14 October 2022 Lisa talk contribs performed unknown action "comments/add" on X708-Hardware (Hi， Please refer toX708-Software)
• 11:13, 14 October 2022 Lisa talk contribs performed unknown action "comments/add" on X708-Hardware (Hello， The [external power switch connector] on the board only support a momentary switch.)
• 09:47, 11 October 2022 Lisa talk contribs performed unknown action "comments/add" on X708 (Hi， There is no a case for Pi4 + X825 V2.0 + X708 + 18650 bateery holder yet. But we will be pruducing a matching Case for it in the near future.)