Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 09:08, 16 February 2021 83.81.183.238 talk posted a new comment on X829 (I have bought a complete set containing the X829 and the UPS_U100_V12 on AliExpress in stead of the X708. The UPS_U100_V12 however does not fit on the raspberry pi because the spacers delivered with it are too long! Is it compatible anyway?)
  • 06:18, 15 February 2021 70.44.166.106 talk posted a new comment on X765 (Is it possible to use this in conjunction with the X735 power management board to allow use of the momentary power switch?)
  • 05:01, 14 February 2021 70.39.111.203 talk posted a new comment on X400 V3.0 (Also - is there an Amazon link for a power supply that is recommended for this?)
  • 05:00, 14 February 2021 70.39.111.203 talk posted a new comment on X400 V3.0 (I have things all wired up, as far as I can tell, but the Pi does not seem to be getting any power? I've removed the power jumper. The light turns blue on the power button when I press it. The power supply I am using is output 6v, 2amps. Should that work?)
  • 05:04, 12 February 2021 97.113.140.29 talk posted a new comment on X728 (Tired your suggestion, but no success. I even drained both batteries completely and the tried again. Oddly, that worked at first, but once the batteries got charged up to a certain point, the x728 shut down the RPi. I have no idea what's going on, but no one from Geekworm is responding on their dedicated forum. I'm not inclined to purchase any more of their products.)
  • 02:38, 12 February 2021 31.18.131.59 talk posted a new comment on X750 (Please help me on this issue, still not working)
  • 22:20, 11 February 2021 88.116.29.118 talk posted a new comment on X705 (I have got 2 pieces X705 and I am having the same issue with both of them: 1. Start-status: - X705 is correctly connected to my PI3 B+ - External power supply is connected to X705 over Micro USB power input, X705's power LED is ON. - 2 18650 batteries are in X705, X705 is charging them - 1 battery indicator LED is permanently ON, the second one is flashing, the others are OFF. - My PI3 B+ is working normal, after having the external power supply off and on X705 is doing its job, i.e. my PI i...)
  • 22:09, 11 February 2021 87.19.206.239 talk posted a new comment on X728 (I have an issue with the RTC clock and can’t find a solution. I tried to install a brand new OS from the official Raspbian Buster Lite, and did a clean install of the x728.sh script from github. The error code at startup of raspberry is: [ 22.027235] rc.local[621]: hwckock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Invalid argument [FAILED] Failed to start /etc/rc.local Compatibility See ‘systemctl status rc-local.service’ for details. I think the problem goes around “hwc...) Tags: Mobile web edit, Mobile edit
  • 21:07, 11 February 2021 71.67.124.118 talk posted a new comment on X825 (Love the mechanical drawing. There is a very important piece of information missing. Including this would be very much appreciated. The vertical 2 and 4 pin connectors are all from the same family. Please provide manufacturer and family or series number so that we can locate the mating connectors and socket pins. Thank you!)
  • 18:12, 10 February 2021 82.6.0.80 talk posted a new comment on X728-Software (Adding the below to my config turns the x728 off after shutdown dtoverlay=gpio-poweroff,gpiopin=13)
  • 17:35, 10 February 2021 82.6.0.80 talk posted a new comment on X728 (For anyone wondering. setting GPIO 13 as out and high will turn off the x728. Would be really helpful to have that listed here as not everyone can install the soft as lifted in this wiki. I am using it on a pi running android.)
  • 01:43, 10 February 2021 82.6.0.80 talk posted a new comment on X728-Software (How do you turn the UPS off after an hour with no power? I've set up my PI to shutdown after an hour with no power reading GPIO6 but I cant get it to turn the UPS off. This means when I apply power again nothing happens as the UPS or PI never actually shutdown.)
  • 01:54, 9 February 2021 177.9.19.148 talk posted a new comment on 2.2 LCD (Thank you for this great guide. I managed to make the display work, but I'm still trying to get the buttons to work. After all the installation procedures, when I try to run any of the Python scripts like (rpi-2.2TFT-kbrd.py, for example), I get an error: Traceback (most recent call last): File "/home/pi/Downloads/Python-keys/rpi-2.2TFT-jstk.py", line 26, in <module> import RPi.GPIO as GPIO RuntimeError: This module can only be run on a Raspberry Pi! What is going on?)
  • 23:29, 8 February 2021 5.95.134.144 talk posted a new comment on X728-Software (I need to be able to shutdown the whole rig (RPi4 and x728) from a script. Is that possible?)
  • 23:33, 7 February 2021 95.90.215.5 talk posted a new comment on X728 (had the same problem, the Raspberry starts briefly and switches off again. After trying for a long time, it worked again using the following procedure. 1. Disconnect the X728 from the Raspberry and remove the batteries 2. Put the X728 back on the Raspberry 3. Insert the batteries (Raspberry must not start, it did it for me every now and then, then start all over again) 3. USB-C charger on connect the X728 4. Switch on X728. Since then everything has been working normally again. Hope it h...) Tags: Mobile web edit, Mobile edit
  • 23:19, 7 February 2021 95.90.215.5 talk posted a new comment on X728 (I found a solution for everyone who wants to shut down the Raspberry Pi and the X728 via a Python script. - import subprocess - subprocess.call(["sudo", "/usr/local/bin/x728softsd.sh"]) so it should work.) Tags: Mobile web edit, Mobile edit
  • 17:33, 5 February 2021 47.247.5.0 talk posted a new comment on Raspi UPS HAT Board (This is mind blowing information. thanks for sharing this precious information with us,)
  • 07:04, 5 February 2021 97.113.140.29 talk posted a new comment on X728 (I installed and used an x728 hat on an RPi4 a few months ago, and it worked great. Unfortunately, I had to do a complete reinstall of the operating system on that Pi, and when I went to reinstall the x728... I can't get it to work. When I try to boot it up (by applying power from the power brick via the usb-c port on the x728), I can see the red and green lights on the RPi start to flash as they would during startup, but then it simply shuts down after about three seconds. This happens every...)
  • 01:27, 5 February 2021 107.128.86.125 talk posted a new comment on LVDS Adapter (Why are there 2 LVDS inputs? Is there some way to plug 2 different LVDS signals in and have a switch to change the output?)
  • 23:30, 2 February 2021 2.230.84.207 talk posted a new comment on X705 (My 705 hat worked fine for 2 weeks, but after that sometimes (when load connected) it start a loop and reports suddenly battery <25%: switches off, start, switch off, start.. at 10-60sec intervals. If i set the autostart mode to off, it just turn off, and when i press the button it starts and power down after 10-60 seconds. If i detach all loads, it stays on, and slowly get charged. Then it works again. tried different loads (usb cam, raspberry, phone), 3 different batteries, 2 different pow...)
  • 22:48, 2 February 2021 31.18.131.59 talk posted a new comment on X750 (Got the same issue after reinstall. It worked at first though, but after installing a couple of things this error comes again.)
  • 09:24, 2 February 2021 210.2.53.195 talk posted a new comment on X829 (I use X829, X735 and Pi4. It has SSD 128GB and 2.5" 4TB HDD, and I connect 5V 5A SMPS power adapter to X735. When I copy large size file to 4TB HDD, Pi intermittently hang and no response, I have to do hard reset. Other experts suggestion is that maybe this problem is from insufficient power. Can I use another power supply to connect X829 and disconnect power connector between X829 and X735, is it no problem?)
  • 00:52, 2 February 2021 84.203.113.89 talk posted a new comment on P173 (Great product for anyone requiring passive cooling. One of the only passive cooling solutions with 4 point cooling pillars including the USB controller. USB controller gets hot on the pi4 so that is a major plus. Scalpel or sharp blade recommended for separating the plastic covers either side of the thermal pads. Well engineered case, fits really well. I would buy another)
  • 22:53, 1 February 2021 31.12.59.80 talk posted a new comment on X728 (Hello, on my x728 the RTC clock works, but does not continue to run when it is switched off. The Raspberry 4 has the time from the last shutdown after switching on. The fake hwclock has been uninstalled. Already had another x728 and there was no problem. Can someone help?)
  • 19:15, 31 January 2021 31.18.131.59 talk posted a new comment on X750 (Hey, it seems, the volt percentage command doesn't work. This is my cli output (Tried on 2 different devices with 2 x750-a): root@raspberrypi:/home/pi# python x750ups.py File "x750ups.py", line 30 print "******************" ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print("******************")? please help. oot@raspberrypi:/home/pi# python2 x750ups.py Traceback (most recent call last): File "x750ups.py", line 31, in <module> print "Voltage:%5.2fV" % readVoltage(bu...)
  • 13:59, 30 January 2021 12.232.133.130 talk posted a new comment on HDMI TO CSI-2 (It says above the OctoPi is not supported.)
  • 05:05, 30 January 2021 178.116.221.26 talk posted a new comment on Robot Expansion Board (Hi, is it possible to run a 12v stepper motor at the same time as a 6v servo? Or would the servo be 'killed' if I supply 12v to the board?)
  • 16:41, 28 January 2021 156.146.47.75 talk posted a new comment on X828 Case (when if ever is this going to be back in stock?)
  • 09:50, 28 January 2021 118.217.176.39 talk posted a new comment on LVDS Adapter (Hello, I'm trying to LVDS to HDMI signal converting. the driving board have LVDS single 4 channel. But S.LH1080P board May support the single 8 channel. Is it possible to connect LVDS single 4 channel to S.LH1080P board?)
  • 05:46, 28 January 2021 151.82.49.48 talk posted a new comment on X705 (Hi, does anybody knows about a case for raspberry pi 3b+X705? Can't find any.)
  • 05:33, 28 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (Sorry, please delete the old posts. I've put all in one comment: Hey, it seems, the volt percentage command doesn't work. This is my cli output: root@raspberrypi:/home/pi# python x750ups.py File "x750ups.py", line 30 print "******************" ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print("******************")? please help. oot@raspberrypi:/home/pi# python2 x750ups.py Traceback (most recent call last): File "x750ups.py", line 31, in <module> print "Voltage:%5...)
  • 05:30, 28 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (I have to ad dtparam=i2c_arm=on dtparam=i2c1=on in config.txt i2c activated in raspi-conf)
  • 05:11, 28 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (root@raspberrypi:/home/pi# python2 x750ups.py ****************** Traceback (most recent call last): File "x750ups.py", line 31, in <module> print "Voltage:%5.2fV" % readVoltage(bus) File "x750ups.py", line 11, in readVoltage read = bus.read_word_data(address, 2) IOError: [Errno 110] Connection timed out and: sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
  • 02:19, 28 January 2021 196.188.243.168 talk posted a new comment on HDMI TO CSI-2 (Should I unplug the cable after connecting) Tags: Mobile web edit, Mobile edit
  • 20:57, 27 January 2021 24.137.145.128 talk posted a new comment on LVDS Adapter (How do I close the motherboard signal spreading function and turn it on the FREERUN fixed frequency function?)
  • 18:51, 27 January 2021 46.34.228.79 talk posted a new comment on X20 HiFi (hi, how to switch between USB TO I2S / SPDIF / Coaxial ?)
  • 10:25, 26 January 2021 108.30.122.153 talk posted a new comment on HDMI TO CSI-2 (I'm trying to use the HDMI card with OctoPi and a GoPro Hero3 but getting this error: pi@octopi:~ $ raspivid -p -f The driver for the TC358743 HDMI to CSI2 chip you are using is NOT supported. They were written for a demo purposes only, and are in the firmware on an as-is basis and therefore requests for support or changes will not be acted on. mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera co...)
  • 03:00, 26 January 2021 109.86.19.109 talk posted a new comment on X835 (What OS should I use to make x835 work? Right now I'm using ubuntu serve 20.10 and cannot see any storage devices connected to my rpi 4. I was using lsblk and sudo fdisk -l to check)
  • 03:37, 25 January 2021 31.18.149.217 talk posted a new comment on X750 Sofrware (Hey, it seems, the volt percentage command doesn't work. This is my cli output: root@raspberrypi:/home/pi# python x750ups.py File "x750ups.py", line 30 print "******************" ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print("******************")? please help)
  • 03:30, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Can someone provide a working RetroPie image for the Pi Zero W with the MZP280V00BR screen? Using auto-install script I run into the gpios_property error and don't know if it is fixable.)
  • 03:06, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (This is on Raspbian 9 stretch with kernel 4.14)
  • 03:02, 24 January 2021 84.142.241.116 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Running the autoinstall script gives me FATAL ERROR "Unrecognized check name gpios_property" in the end. Touch function works after running the acript, but display output does not work. How to fix?)
  • 01:25, 24 January 2021 131.147.76.85 talk posted a new comment on X829 (I connected an SSD in a usap compatible case to the USB port on my X829, but it won't connect via USB3.0(5G). The SSD connected USB2 (480M). I checked with lsusb command, but USB port on X829 is USB2, not USB3.0. Is my X829 broken? Please help me to confirm this.)
  • 01:12, 24 January 2021 131.147.76.85 talk posted a new comment on X735 (What does "safe shutdown" mean? I checked syslog, but the Linux shutdown sequence is not executed and the power turns off suddenly. Please let me know in what sense it is "safe". Thank you for your time.)
  • 00:23, 24 January 2021 79.159.194.99 talk posted a new comment on X725 (The X725 board does not start the RPi 4 when the power is restored (via micro usb) if the 18650 cells are mounted. However, if the cells are not present, it does switch on the RPi. Is there any way to get this auto on with the cells connected? I already have the pin header for "AUTO-ON" shorted.)
  • 11:58, 23 January 2021 35.134.21.24 talk posted a new comment on X728 (Im experiencing an issue with starting up this UPS.I have tried charging my batteries with an efest battery pack charger and in the hat itself but when i try to power on the board it shuts down within 3 seconds. I have followed the troubleshooting tips above but i have yet to fin a problem. The Power light turns on and the 5v power led does as well, but then they both shut off. Id like to assume my board isnt broken and my batteries work, so is there a schema or effective way to test points w...)
  • 09:16, 23 January 2021 137.175.181.46 talk posted a new comment on P173 (Awesome product that keeps temperature way down! Easy to install and assemble! Your product rocks!!!)
  • 16:41, 22 January 2021 Cindy talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi, yes, this screen is for Raspberry Pi Zero /W use.)
  • 16:39, 22 January 2021 Cindy talk contribs posted a new comment on X708-A1 (Hi friend, Yes, of course. You can use less than 8 batteries.)
  • 16:37, 22 January 2021 Cindy talk contribs posted a new comment on X862 (Hello friend, Do you try to format the SSD before use? Could you please attach your order number and some more details to contact us at support@geekworm.com? We will help you with this. Best regards, Cindy/Geekworm)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"