X708

X708 V2.0 UPS HAT

X708 V1.2 UPS HAT(Sold Out)

X708 V1.0 UPS HAT(Sold Out)

X708 V2.0/V1.2/V1.0 UPS HAT

X708 V2.0/V1.2/V1.0 Battery

X708+X728-A2

Foreword

Note:

The x708 has been sold out and there is no plan to produce it for the time being. You can use the X728, which can completely replace the X708

If you want to purchase in bulk, please contact us at info@geekworm.com

NOTE: The X708 UPS DOES NOT support Raspberry Pi 5 hardware

Why did X708 come out？

Although we provide a compelete raspberry pi NAS solution with NAS shield(X825/X857/X829/X835 etc.),X735 and matching metal case, but we still have received many feedbacks that want to support UPS, so we have to respond to this request.

Our original intention of designing X708 is to match with NAS shell (such as X829-C1, X857-C3 or X857-C1, X825-C7) to provide a raspberry pi NAS solution with UPS function. In order to save space, we must separate the battery from the UPS expansion board when designing . This is also the biggest difference between X708 and X728;

Safety Instructions and Warnings

You must read these safety instructions and warnings before charging your batteries.

Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
Do not mix and use old batteries and new batteries, or batteries with different brand names.
Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X708 on the wood material or carpet and unattended.
Must keep the X708 away from children.
Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/

Update History

X708 V2.0 is released

x708 v2.0 is release on April 2022.

Update:

Added protection circuit and alarm function when the battery is reversely connected (RESERVED will be on)
Supports the control of two fan speeds
Solved the problem that the old version can't charge when the battery is exhausted
Improved AUTO ON function
Added battery over-discharge function
Improved power path management function: when external AC power is supplied, the AC PSU supplies power to the UPS shield and also charges the battery.

X708 V1.2(off-production)

Update:

Remove the ASD function but you can achieve this function through software programming. Please refer to X708-Software
New added GPIO16 to control fan speed, HIGH=>fast fan speed, LOW=>slow fan speed; refer to X708-Hardware
Added voltage surge protection circuit

Overview

The X708 is an advanced uninterruptible power supply expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides 5.1V Max. 8000mA Power Backup for even the most demanding Raspberry Pi set ups, intelligent and safe power management, safe shutdown，AC power loss/ power adapter failure detection , auto power-on, full poweroff from software, and a cooling fan.

The X708 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X708 can also be used with the X825/X828/X829 (2.5" HDD/SSD Shield) and X857/X862/X872(MSATA/M.2 SSD shield) for safe data backup.

There is a 8-cell 18650 battery holder X708-A1 for X708, please refer to X708-A1.

Some key features:

Excellent UPS function such as Power Loss Detection(PLD), Automatic Safe Shutdown(ASD), Auto Power On(AON) etc., DC 5V Max. 6A output;
With cooling fan, no extra cooling solution.
HAT size. Separate the battery from the expansion board, which can save a lot of space, which will bring more flexibility.
Reserved two kind battery port (XH2.54 and PH2.0), supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery, No capacity limit, only request 3.7V lithium battery (No include lithium battery)

Working principle

The GPIO13 is used to control the power button, It goes high for 3 seconds that means the power switch is pressed and held for 3 seconds. then the X708 will issue a pulse to inform the system to implement safeshutdown via GPIO5, and will monitor the GPIO12, once shutdown process is implemented, GPIO 12 will go to low and will be recognized by the X708, then the X708 will wait for 7-8seconds then fully cut off power.

Firstly you have to get the script for power management well installed and run at boot. You can use the onboard power switch to verify , press and hold for 3 seconds, the blue LED will flash slowly and the shutdown is going then all LEDs will be off. once this works, then you can use the GPIO13 control.

The hardware and its firmware are verified. if you have a DMM, you can use it mesuare the GPIO voltage which will be helpful to understand above.

Features

FOR USE WITH	Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B
Operating System	Raspbian Stretch Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
KEY FEATURES	Smart and powerful Uninterruptible Power Supply (UPS) Provides continuous operations for up to 10~30hours (depending on battery type and qty used) Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups Supports 2A/3A fast battery charging Integrated over current protection and over voltage protection Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c) Integrated 10-A fully-integrated synchronous boost converter Intelligent automatic charging and discharging Operate in both charge mode and boost mode to allow full system management and battery power mgt Integrated IN-to-SYS pass-through path to pass the input voltage to the system Advanced system power-path management avoids batteries frequent charging and discharging Advanced system power-path management allows 3A fast charging and powering Raspberry Pi at the same time On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% Batteries attach via PH2.0-2P or XH2.54-2P Intelligent and safe power management Equipped with momentary button for easy power control Press the button to turn on Press the button and hold for 1~2seconds to reboot Press the button and hold for 3~7seconds to implement safe shutdown Press the button and hold for >8seconds to force shutdown Supports safe shutdown and full poweroff from software On-board blue LED shows the status of power on, reboot and shutdown AC power loss or power adapter failure detection (LED and GPIO indication) Optional to enable Auto power on when power applied or restored Automatic safe shutdown when battery low (voltage <3.0V) Ultra-low standby power consumption to maximize battery life Integrated cooling fan that allows the heat from your Raspberry Pi to dissipate! Completely solve the overheating problem of your Raspberry Pi Efficient drop temp of Raspberry Pi CPU Misc Powers the Raspberry Pi via the 40-pin header - no additional cabling required Standard Raspberry Pi extension interface, compatible with other expansion boards DC power jack (5.5*2.5mm) and Type-C socket convenient for power input On-board PH2.0 connector allows to connect external power switch and DIY your perfect case On-board XH2.54 power output connector allows to power other devices
SPECIFICATION	Power supply via Type-C socket: 5Vdc ±5%, ≥3A; Via DC power jack: 5Vdc ±5%, ≥4A UPS output : 5.1V ±5% Max. 6A UPS charging current: 1.8~2.2A / 2.3~3.2A Terminal Battery Voltage : 4.24V Recharge Threshold : 4.1V Battery: 3.7 Lithium Battery
NOTES	Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket. Do not use the battery with built-in protection circuit.

How to Power

Power via DC5521 Jack of X708, 5.1Vdc +/-5% , ≥4A (DC5525 Jack is compatible with DC5521, also support 5V PSU with DC5525 Jack)
Power via USB Type-C port of X708, 5.1Vdc +/-5% , ≥3A (Geekworm Type-C 5V 4A 20W power supply is recommended.）

X728-C1

X728-C1 is a metal case for X708 / X735 or X728 V2.2 / V2.1 / V2.0.

Installation Video: https://youtu.be/QOG30LXb6ds

for X735/X708/X728 V2.x/
with metal switch
active cool
application
dimension
x728-c1 Accessories
with GPIO hole

Packing List

1 x X708 Expansion Board
8 x M2.5 *5mm Screws
4 x M2.5 *12+6mm Spacers
4 x M2.5 *12mm Spacers
2 x Jumper link Pitch 2.54mm

User Manual

Installation Video

Installation Video for Raspberry Pi 4+X825 V1.5+X708/U100/X735+X825-C7 Case: https://youtu.be/kKIPf4AsiYY

Installation video for Raspberry Pi 4+X857 V1.2/X862 V1.0/X872 V1.1+X708/U100+X857-C1 Case: https://youtu.be/HGPpfDbfyxM

Software & Hardware Guide

X708-script: This script is required to install to enable safe shutdown function.
X708-Hardware: Provides some hardware parameter information
AutoCAD Drawing Interchange Format file: File:X708-PCB-V1.0.zip

FAQ

Q1: What battery is recommended for X708?

A:

Pls use high quality batteries from PANPASONIC, Toshiba, etc.
Lithium battery need to meet following 2 conditions: 1. Working voltage: 3.6V-3.7V; 2. Maximum voltage after full: 4.2V
Do not use the battery with built-in protection circuit

Q2: What type connector to request for lithium battery?

A: X708 provides two type battery connectors: PH2.0-2P and XH2.54-2P, you can connect two battery at the same time, BUT please use the same model batteries, also please pay attention that the polarity of the XH2.54 and PH2.0 connectors is different.

Q3: Is there a corresponding UPS NAS solution for 3.5-inch hard drives?

A: Sorry, There is no UPS NAS solution for 3.5-inch hard drive because the 3.5-inch hdd request 12V voltage, so we have no plans to support this demand for the time being. BUT you can refer to X835//X832, and they can solve some of your needs, they need external power supply.

Q4: How to restart the pi board when AC Power supply is connected?

A: Please enable 'AUTO POWER ON' or 'AUTO ON' function if you want restart when the AC Power supply is reapplied.

Q6: About auto shutdown, found your board will auto shutdown.

A: Please check if enable the ASD function (shorted the ASD header), if you enable the ASD function, please sure your oeration is right: first, place the battery into the battery holder, insert the jumper to ASD header after 3 second,this is very important!!

Q7: Does the X708 support to use without any battery installed?

A: Yes, it is ok to use the X708 without battery, but please note that do not use low quality power supply.

Q8: Why the X708 does not work normally?

A: Please make sure you have install the script before use, please refer to X708-Software

Q9:If "AON" is shorted, can you use a latching power switch to turn the x708 on/off, or is it on all the time, regardless of the switch?

A:Sorry, this is not supported.

Q10:Does the X708 support to use the latching switch?

A:No, the X708 does not support to connect latching switch, only support momentary switch.

Q11: What is the fan type of the X708?

A: It is szie 3010 cooling fan with PH2.0-2P connector.

Q12: Can you use the X708 with a poe hat to provide the power?

A: No, not suggest to use like this.

Q13: Why does the X708 power off automatically?

A: Please use 3.7V lithium polymer battery without protection board, or battery with enough discharge capacity, or the X708 will power off automatically when use with high load. Refer to video test: https://youtu.be/Saco6rJm4ZQ

Enable comment auto-refresher

Anonymous user #31

2 months ago

Score 0

Hello everybody

I use a UPS X708 from two year ago to control a Raspberry and OpenCPN. From the last navigation, the UPS has a rare working. Normally when the power supply disappear, the OpenCPN close by a deamon then 5sec later the Ups shutdown the raspberry ans stop all. But from a week, when the PS dissappear, the OpenCPN stop, the Raspberry shutdonx, but Bleu LED flash three time for +/- 10 sec, then the raspi reboot with the PS always off ? I have try different way, manually shutdown raspi then the UPS, but problem still. If when UPS and Raspi ON, I press the pushbutton for 3 sec, raspberry shutdown immediately. Any body a idea why ??

Thank you

Permalink | Reply

Anonymous user #30

5 months ago

Score 0

Hi, the auto on after power failure is not working consistently. To power on sometimes I need to unplug the USB C power cable and re-plug.

Please note that I have consistently: 1) Waited a few minutes after the battery indicator light is off - a long as 5 minutes, there is no way the USB plug is still providing power. 2) USB plug is disconnected from mains.

Thanks in advance

Permalink | Reply

Lisa

5 months ago

Score 0

Hi,Could you please tell us your order number by email [info@geekworm.com]? Thanks.

X708

Contents

Foreword

Why did X708 come out？

Safety Instructions and Warnings

Update History

X708 V2.0 is released

X708 V1.2(off-production)

Overview

Working principle

Features

How to Power

X728-C1

Packing List

User Manual

Installation Video

Software & Hardware Guide

FAQ