Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 22:32, 14 August 2023 81.14.205.62 talk posted a new comment on X703 (What does "NOT supports software safe shutdown" exactly mean? How do I shut down the raspberry then? Is it only possible with the blue button? Oder can I use "sudo shutdown now" command via shell?)
  • 16:23, 14 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Thanks for your feedback. We will also replace it with a better fan soon. Regards.)
  • 12:21, 14 August 2023 Walker talk contribs posted a new comment on GDC (Hello, we haven't sold this product for a long time, can you provide your order number? Then you can send it to our email: '''support@geekworm.com ''')
  • 07:55, 14 August 2023 76.226.71.35 talk posted a new comment on GDC (Can the mini-PCIe be converted to M.2 M-Key? if yes, how? All I can find are adapters for the reverse direction.)
  • 01:00, 13 August 2023 94.252.2.118 talk posted a new comment on PiKVM-A3 (I replaced the original fan with a Noctua NF-A4X10-FLX 5V I had lying around. Admittedly, I had to cut the original fan cable and 'MacGyver' the header connector to the Noctua fan (which I also had to shorten). One thing to note -> since I put a 40mm fan inside a 30mm fan opening, it does not fit completely, however, there is just barely enough space to jam the new fan firmly in place over part of the opening, which gives it enough airflow. Results: Cooler temps, low noise, no vibration.)
  • 00:44, 13 August 2023 94.252.2.118 talk posted a new comment on PiKVM-A3 (Replying to my orignal post - I don't believe it is possible to have the wake-up feature. I looked up the RTC chip online and it just doesn't have the wakealarm functionality built in the hardware (though if someone somehow pulls it off, by all means, please explain it here) The PiKVM v3 HAT has a different RTC chip, which supports this feature, but for the price diff, it's not worth it for me, given that we even have support for all major features, incl. audio. Hence, I recommend changing th...)
  • 02:28, 12 August 2023 76.135.126.21 talk posted a new comment on PiKVM-A3 (Any update on this issue? Is is possible to get wakeup support with the X630-A3 and ds1307 RTC?)
  • 16:20, 11 August 2023 Walker talk contribs posted a new comment on X728 (Hello, X728 we have designed a shell, you can buy it directly: https://www.aliexpress.com/item/3256804044629965.html?gatewayAdapt=4itemAdapt ''' ''')
  • 16:06, 11 August 2023 Walker talk contribs posted a new comment on X735 Software (Hello, you can contact us via our email: '''support@geekworm.com ''' we will do our best to solve your problem)
  • 16:05, 11 August 2023 Walker talk contribs deleted comment #3909 on X735 Software
  • 16:04, 11 August 2023 Walker talk contribs posted a new comment on X735 Software (Hello, you can contact us via our email: support@geekworm.com , we will do our best to solve your problem)
  • 11:58, 11 August 2023 78.35.96.156 talk posted a new comment on XScript (I forgot to mention that my Raspbian is set to german locale. We are using a comma as decimal separator (e.g. 40,4 insteda of 40.4 °C. I think this causes the error, right? Stony)
  • 04:39, 11 August 2023 78.35.96.156 talk posted a new comment on XScript (Hi, I'm using Raspbian GNU/Linux 10 (buster))
  • 00:31, 11 August 2023 73.240.5.34 talk posted a new comment on X728 (Hello, another user who wishes to design a custom enclosure, who requests a STEP model file to reference the dimensions and component placement.)
  • 18:10, 10 August 2023 Harry talk contribs posted a new comment on XScript (Hi, Stony Thanks for your feedback. Want to know what OS you are using? Is it the official system of Raspberry Pi? We recommend that you reply to us via email '''support@geekworm.com''')
  • 17:57, 10 August 2023 Harry talk contribs posted a new comment on X650 (Yes, you are right.We wrote a comma missing, thanks for the correction. And we correct it in wiki.)
  • 17:48, 10 August 2023 89.220.239.145 talk posted a new comment on X735 Software (hello, I had the x735 v2 worked on my raspbarry whit twister and it worked fine. i could rean the fan, safe shutdown worked to. Now i have a new sd in it whit ubuntu 23.04 and i have some problems. i program everthing as was standing above for ubuntu server. what i'm doing wrond. when ubuntu start only thing what is does is spinning but no controll or reading. it looks like he missing some files or directory. here some of my issues. pi@pi-desktop:~$ sudo apt-get install -y wiringpi python py...)
  • 04:48, 10 August 2023 78.35.96.156 talk posted a new comment on XScript (Hi, I successfully installed the X-Script on my Naspi and it works perfectly! But I see countless entries in the daemon.log every 5 seconds: x-c1-fan.sh[483]: /usr/local/bin/x-c1-fan.sh: Zeile 184: printf: 38.46: Ungültige Zahl. "Ungültige Zahl" means "invalid number". Line 184 is: " printf -v CUR_TEMP %0.0f "$TEMP" # Convert float to int" Do you know what causes this and how to fix this? Thanks a lot! Stony)
  • 04:43, 10 August 2023 95.115.31.50 talk posted a new comment on X650 (Shouldn't it be dtoverlay=i2c-rtc,ds1307 instead of dtoverlay=i2c-rtcds1307?)
  • 10:23, 9 August 2023 Walker talk contribs posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello, if you don't want to use battery power supply, it depends on the voltage of the device you connect, if it is 3.3V, you can choose to connect to VIN 3.3V and GND (you can also connect to VIN 5V and GND), if it is If it is 5V, it can only be connected to VIN 5V and GND (cannot be connected to VIN 3.3V), you can refer to the following figure: 500px|none|ESP32-Board)
  • 20:03, 8 August 2023 103.121.17.22 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (if im not using battery or usb which pin for the supply ?)
  • 17:59, 8 August 2023 Harry talk contribs posted a new comment on X883 (Sorry No matching case now. Dimensions source file (DXF): File:X883-V1.2-DWG.dxf)
  • 17:59, 8 August 2023 Harry talk contribs deleted comment #3893 on X883
  • 17:56, 8 August 2023 Harry talk contribs deleted comment #3897 on X950 software
  • 17:54, 8 August 2023 Harry talk contribs posted a new comment on X950 software (for the picoreplayer the correct hardware is the '''Audiophonics ISabre Q2M''' hw:CARD=DAC,DEV=0 - I-Sabre Q2M DAC, I-Sabre Q2M DAC i-sabre-codec-i2c.1-0048-0 Thanks to Ignace Sannen)
  • 17:46, 8 August 2023 Harry talk contribs posted a new comment on X680 (You can also make your own ATX control cable, in fact, it is a normal Ethernet cable, and the requirements must be 568B line sequence File:RJ75-568B.png)
  • 17:40, 8 August 2023 Harry talk contribs posted a new comment on X680 (Hi, RJ45 head 568B line sequence. In fact, the connection method of the general network cable is 568B)
  • 17:10, 8 August 2023 2.136.192.159 talk posted a new comment on X703 (Where can I find the schematic of this product?)
  • 19:23, 7 August 2023 Walker talk contribs posted a new comment on X883 (Hello, there is currently no shell available for the X883 board, you can refer to the size drawing of the X883 to 3D print it yourself 700px|none|X883 Size)
  • 05:00, 7 August 2023 85.233.56.167 talk posted a new comment on X883 (Hi, is there a case available? To buy or to 3d print ?) Tags: Mobile web edit, Mobile edit
  • 02:56, 7 August 2023 23.118.44.211 talk posted a new comment on X950 software (Using piCorePlayer 8.2.0 64-bit, and don't get any sound. I tried "RPi DAC (last choice)" as "Anonymous 2" suggested, but still no sound. My old HiFiBerry DAC+ works fine with the same installation. The hardware seems nice though.)
  • 14:10, 4 August 2023 Harry talk contribs deleted comment #3879 on PiKVM-A3
  • 14:09, 4 August 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (You can google Raid mode or refer to Raid Instruction)
  • 14:08, 4 August 2023 Harry talk contribs deleted comment #3889 on NASPi Gemini 2.5
  • 14:08, 4 August 2023 Harry talk contribs posted a new comment on NASPi Gemini 2.5 (You can google 'PM')
  • 10:18, 4 August 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (How to Configure RAID Setting)
  • 10:15, 4 August 2023 Walker talk contribs posted a new comment on NASPi Gemini 2.5 (Switch to PM mode, and the two hard disks run independently, so that two hard disks can be recognized. If you select the RAID0/RAID1 mode., only one hard disk can be recognized. Please refer to here for specific operations: https://wiki.geekworm.com/How_to_Configure_RAID_Setting''' ''')
  • 17:16, 3 August 2023 125.168.77.114 talk posted a new comment on NASPi Gemini 2.5 (In the RAID configuration legend printed on the board, what is "PM"?)
  • 14:06, 3 August 2023 Harry talk contribs posted a new comment on X450/X5500 Software Configuration (for the picoreplayer the correct hardware is the Audiophonics ISabre Q2M)
  • 11:54, 3 August 2023 Walker talk contribs posted a new comment on X306 (Please email to support@geekworm.com, we will try our best to solve your problem)
  • 11:49, 3 August 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, if you need an I2S audio cable in the future, you can buy it here: https://www.aliexpress.us/item/3256805721728180.html?gatewayAdapt=glo2usa4itemAdapt''' ''' You don't have to buy the X630-A2 audio HAT)
  • 11:44, 3 August 2023 Walker talk contribs posted a new comment on PiKVM-A3 (Hello, you can buy I2S audio cable here ： https://www.aliexpress.us/item/3256805721728180.html?gatewayAdapt=glo2usa4itemAdapt''' ''')
  • 10:17, 3 August 2023 Harry talk contribs posted a new comment on P165 (Hi， #The thread length is 0.45mm for M2.5 screw.Basically, you can buy any M2.5, just pay attention to the length #The standoff depend on the height of your hat.)
  • 10:16, 3 August 2023 Harry talk contribs deleted comment #3880 on P165
  • 10:12, 3 August 2023 Harry talk contribs posted a new comment on P165 (Hi, #The thread length is 0.4mm for M2.5 screw. #The standoff depend on the height of your hat.)
  • 10:05, 3 August 2023 Harry talk contribs posted a new comment on PiKVM-A3 (Please email to support@geekworm.com, it is too expensive to buy an x630-A2 on AMZ just for one I2S cable)
  • 10:04, 3 August 2023 Harry talk contribs deleted comment #3846 on PiKVM-A3
  • 05:49, 3 August 2023 37.201.240.80 talk posted a new comment on X306 (How is the IN-to-SYS pass-through path, to pass the input voltage to the system, implemented and how can I configure and access it?)
  • 22:16, 2 August 2023 189.207.62.48 talk posted a new comment on PiKVM-A3 (Buy the X630-A2 audio HAT from amaz)
  • 22:15, 2 August 2023 189.207.62.48 talk posted a new comment on PiKVM-A3 (I tried the I2S audio cable from X630-A2 audio HAT and it worked on my X630-A3 setup.)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"