Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 12:02, 17 July 2020 Cindy talk contribs posted a new comment on X835 (Hi friend, The standoffs for X835 to stack just added recently, if you do not have, please contact us to get some.)
  • 11:55, 17 July 2020 Cindy talk contribs posted a new comment on X835 (Hi friend, Sorry the X835 is not compatible with X728.)
  • 11:52, 17 July 2020 Cindy talk contribs posted a new comment on X728 (Hi friend, Sorry, X728 is not compatible with X835, as the X835 requires 12V power supply.)
  • 11:39, 17 July 2020 Cindy talk contribs posted a new comment on X829 (Sorry, no, X829 is not stackable.)
  • 22:15, 15 July 2020 83.81.183.238 talk posted a new comment on X728-hardware (One more question: why can't I use protected 18650 batteries? They are more safe, aren't they?)
  • 22:14, 15 July 2020 83.81.183.238 talk posted a new comment on X728-hardware (I bought the X825/X735 set with case and power supply a short time ago and now want to replace the X735 by the X728. Is this possible? It will not fit in the case anymore though and the cooling fan will be gone, so what is the best solution to avoid overheating?)
  • 22:56, 13 July 2020 112.134.175.122 talk posted a new comment on X829 (Can you stack two or more X829s together (similar to X828)?)
  • 00:29, 13 July 2020 99.149.124.207 talk posted a new comment on Raspi UPS HAT Board (my serial terminal does not work when i power it through the Raspi UPS HAT Board? if i pull the power supply from Raspi UPS HAT Board and put on RPi board, the serial terminal works again. Is there something that interferes with serial pins (RXD,TXD) when Raspi UPS HAT Board is powered up?)
  • 08:47, 11 July 2020 ONiLX talk contribs posted a new comment on CM IO Board (How do I read the battery level using the board?) Tags: Mobile web edit, Mobile edit
  • 07:48, 11 July 2020 Gtejias talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi.. after a lot of search over the internet, I still can't manage to solve the blue/yellow screen problem... tried any of the advices mentioned, but no one works!!! Has anyone done it NOT entering terminal to write sudo raspi.. everytime?)
  • 21:41, 10 July 2020 62.64.201.180 talk posted a new comment on X829-C1 (Do you have any plans to supply a case that will take a thicker drive on HDD2? Most drives over 2Tb are around 15mm, perhaps even one that would support 15mm drives on both HDD1 & 2 to allow for larger NAS to be built? Thx)
  • 20:36, 8 July 2020 91.84.191.182 talk posted a new comment on X735 (I have the x735 v2.1 working on a Pi 4B running Buster. However it doesn’t work when I plug a HiFiBerry DAC + Pro due to conflicts with GPIO. The Pi system just halts after the DAC kicks in from the script /etc/x730pwr.sh HiFiBerry states the GPIO18 the sound interface in hardwired on the Pi so it can’t be mapped onto another pin. GPIO18 is only used for software shut down $ x730off that I’m not going to use Reference script /usr/local/bin/x730shutdown.sh I have re mapped the GPIO4 and 17...)
  • 22:26, 7 July 2020 Natalka1122 talk contribs posted a new comment on X835 (Is it compatible with X728? https://raspberrypiwiki.com/X728 When stacked, does it support software RAID? I want to make all my data safe in case of powerloss.)
  • 22:26, 7 July 2020 Natalka1122 talk contribs posted a new comment on X728 (Is it compatible with X835? https://raspberrypiwiki.com/X835 If so, how it should be powered?)
  • 05:59, 7 July 2020 Bartoszkobak talk contribs posted a new comment on T200 (Thank you for the code. When i run the code the battery voltage slowly drops from 4.22v to 4.17 whilst in a loop but power is supplied via the dc jack (5V 4A). When i unplug and plug in the power again the voltage goes back to 4.22V. Could anybody possible assist? Thank you)
  • 14:46, 5 July 2020 154.120.100.133 talk posted a new comment on X857 (Hello, does this device have support for UASP)
  • 04:16, 5 July 2020 Wouterlet talk contribs posted a new comment on Raspi UPS HAT Board (I followed your manual but get stuck on the last part: sudo python example.py This gives me the error: Unable to open I2C device: No such file or directory I enabled I2C copied example.py and raspiupshat.so into /home/pi/wiringpi and started the command from there One thing is that I used this link to copy, because yours was unavailable: git clone https://github.com/wiringpi/wiringpi Can you help me with this?)
  • 21:03, 1 July 2020 66.57.116.3 talk posted a new comment on X728-hardware (How could one write a script to trigger the x728off code to run in the event of a Power Loss Detection)
  • 20:48, 1 July 2020 193.24.32.58 talk posted a new comment on UPS3 (Looks primising, will test it! How to configure (limit) charging current to 1A ?)
  • 14:12, 1 July 2020 87.104.16.13 talk posted a new comment on X825 (Hi! It seems that board X825 v. 1.5 Doesnt support the TRIM command is that the case ? Brian)
  • 22:29, 30 June 2020 45.89.175.126 talk posted a new comment on X872 (Hi! The transfer rate between the NVMe SSD and the RPi 4 will be limited by the USB3.0 gen.1 connection, rated at 5Gbits/sec. Is this correct? Thanks)
  • 21:23, 30 June 2020 91.84.191.182 talk posted a new comment on X735 (Before using the X735 v2.1 I plunged it into a working Pi4B. Using the momentary power button(external one and nothing so used the PCB button), no jumpers connected, no PSU connected to the Pi, it behaves like this:- 1 Pressing power button Pi powered up, fan and lights on X735 on Pi good. 2 Pressing the power button 1 to 2 secs nothing, no flashing LED's and no action. 3 Pressing the power button 3 to 4 secs all powered off Pi and X735 as if I had pulled the plug and no flashing LEDs I don'...)
  • 16:40, 30 June 2020 Cindy talk contribs posted a new comment on X829 (Hello sir, The 2.5" SSD/HDD capacity is no limit, but SSD thickness is limited by the standoffs height.HDD1 thickness Max 11mm, HDD2 thickness Max 12mm.)
  • 03:16, 29 June 2020 193.28.61.1 talk posted a new comment on X829 (What height of 2.5 Inch disks does it support?)
  • 10:08, 28 June 2020 Harry talk contribs posted a new comment on Wireless USB adapter (Thanks.)
  • 20:21, 27 June 2020 94.210.102.112 talk posted a new comment on X735 (After installing the Raspberry Pi 4B in the enclosure with X735 and 2 X828 and this script the raspberry with buster 4.19.118-v7l+ does not respond anymore to the sudo reboot command. Instead it does a halt, at least it seams that way. Before the Pi 4B responded normally. The sudo poweroff works normally, but I need a reboot from remote.)
  • 17:52, 27 June 2020 Danperryy talk contribs posted a new comment on Raspberry Pi DIDO Board (I can not comprehend how you would not publish a schematic of at least the I/O interface pins of the DIDO board. Are there clamping didoes to both rails? What are the values of the input resistors? What to the open collector outputs look like? What current will the outputs drive? What is the max vcc on the output pins? I won't buy another Geekworm product.)
  • 15:09, 26 June 2020 Harry talk contribs posted a new comment on T200 (Please refer to T200_software)
  • 15:09, 26 June 2020 Harry talk contribs posted a new comment on T200 (Please refer to T200_software)
  • 17:21, 25 June 2020 125.136.173.179 talk posted a new comment on X728 (Why does the Raspberry Pi turn on and off repeatedly? The power turns on and turns off after 3 seconds, and turns on again. Is it because the battery is not fully charged? X750 had the same error...)
  • 01:44, 25 June 2020 Isaiahgoveait talk contribs posted a new comment on X835 (I found this picture here on aliexpress selling this. https://imgur.com/a/wuRMaZg)
  • 00:27, 25 June 2020 90.54.149.252 talk posted a new comment on X735 (Have you found a solution to this problem? I have exactly the same concerns. I have rpi4b with an X735 and the X828. My x735 powers my rpi4b and the x828. During a reboot, it goes out correctly but does not come back on. forced to reboot the x828 for the rpi4 to restart.)
  • 09:22, 24 June 2020 Cindy talk contribs posted a new comment on P171 (Hello friend, sorry the information has been uodated now.)
  • 22:46, 22 June 2020 82.65.95.168 talk posted a new comment on X835 (Hi, I have ordered two X835 boards in order to stack them. But I don't think there's enough room for the 3,5 disk if I stack. Also, I don't have the needed screws to "link" them together. Where do I get them? Thanks.)
  • 22:30, 21 June 2020 94.210.102.112 talk posted a new comment on X735 (I have Rasp 4B with 2x X828 and 1x X735 with casing Manual reboot does not work and press the button 1~2 sec. does not work either. System goes down, but no reboot. Is there an solution?)
  • 22:22, 18 June 2020 169.0.209.225 talk posted a new comment on T200 (Hi. Also wondering if there is code to read the battery information via Bat I2c. Thank you)
  • 19:10, 17 June 2020 JesseArmand talk contribs posted a new comment on X728 (I'm running https://raspap.com/ to use the Pi as a wireless hotspot. There was an issue with bringing up the wireless interface on RaspberryPi 3B+, if I short the jumper pin for ASD (Auto Shutdown). If I don't short the jumper, it becomes normal. Has anyone else encountered the same issue?)
  • 19:34, 16 June 2020 91.162.221.188 talk posted a new comment on X820 (Hello, i want know if it's possible to put the device in auto on and how we do that.)
  • 08:15, 12 June 2020 Clintla talk contribs posted a new comment on X400 V3.0 (So its great there is a video to put it together but why no actual instructions? If you install the latest Raspian OS version, how do you get the unit to work? I dont see an option in sound devices as if it has not detected the device)
  • 00:01, 12 June 2020 Mikhail talk contribs posted a new comment on X710 (Hello I received the X710 board, connected to my RaspPi4B, installed the software as recommended above and unfortunately could not make it fully functional: ON works, OFF power cut does too (after 8 sec of holding a button); safe shut down DOES NOT. Any help would be much appreciated!)
  • 22:02, 10 June 2020 190.47.120.32 talk posted a new comment on Raspi UPS HAT Board (Can I use I2C DS1307 RTC with Raspi UPS HAT Board?)
  • 02:00, 9 June 2020 71.192.181.102 talk posted a new comment on X735 (I upgraded to the X728 and it does not cooperate at all with the X735 script, when i startup this script automatically shuts it down. How do i completely uninstall this script so i can install X728 Script)
  • 01:13, 9 June 2020 96.3.33.36 talk posted a new comment on X750 (Will the X750-A2 power up & work if there are no batteries X750, But I have 12 batteries in the 3 A-2 boards?)
  • 07:12, 6 June 2020 79.77.210.114 talk posted a new comment on X728-hardware (No, correction, it reads thus : From the Power jack end : PLD (Power loss detection) AON (Auto On) is the middle pair. ASD (Auto shutdown) is nearest the USB-C Connector.)
  • 14:29, 4 June 2020 Harry talk contribs posted a new comment on T200 (Yes. one battery is ok also.)
  • 02:17, 4 June 2020 79.77.220.185 talk posted a new comment on X728-hardware (Pin assignments for the jumpers are printed on the underside of the board at least! : From the Power jack end : AON (Auto On) PLD (Power loss detection) ASD (Auto shutdown) to nearest the USB-C Connector)
  • 10:02, 3 June 2020 125.136.173.179 talk posted a new comment on X750 (Is there a way to manage power with some code instead of a switch to manage power? For example, Is there any way to safely shut down the Raspberry Pi when the power supply is interrupted? How can I do this?)
  • 17:40, 2 June 2020 Zakukashi talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello, I connected this screen to my PI Zero, everything works great with colors and brightness etc.. However my screen seems to have permanent black lines in a weird circle configuration. Almost looks like artefacts left from someone drawing on the screen. How can I remove this? IT seems to be always there, even when PI is booting I can see the lines "stuck". Heres what it looks like: https://imgur.com/a/ppxY7Al)
  • 04:01, 31 May 2020 Nahumb talk contribs posted a new comment on X825 (Hi, 2 questions regarding Raspi 4 WiFi performance (2.5G and 5G): 1. Dose the X825 affect the Raspi 4 WiFi performance? (I see that in version 1.2 there was a metal case around the USB circuits, and it is not there any more on version 1.5. Is it related to RF interference?) 2. To what extent does the metal case affect the Raspi WiFi performance? Thanks, Nahum.)
  • 02:38, 31 May 2020 182.19.255.57 talk posted a new comment on How to read the battery capacity via I2C on X750&725 (Any discription on the ph2.0 4-pin external power switch? I want to connect to an external switch, but do not know the pin out. Thanks.) Tags: Mobile web edit, Mobile edit
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"