Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 16:29, 19 August 2025 5.165.7.42 talk posted a new comment on LVDS2 (HI, i see 'LVDS_O_CLK,' but where is 'LVDS_E_CLK'? Is it needed, or can it be left unconnected? Or should it be duplicated from 'LVDS_O_CLK'?)
  • 00:14, 19 August 2025 192.145.119.184 talk posted a new comment on X1015 (Why aren't any compatible SSDs' listed for the X1015 in your documentation, only incompatible models?) Tags: Mobile web edit, Mobile edit
  • 22:54, 18 August 2025 86.14.10.158 talk posted a new comment on X5500 Hardware (I'm using a latch switch to turn on and off X5500 I had sound caming using wired in left and right but not getting any sound what do I need to change? To get my sound working again. is it the jumpers.)
  • 15:11, 18 August 2025 189.78.210.225 talk posted a new comment on T208-hardware (Hello, i use T208 for a long time, today my JBL flip4 was converted by me to a sound board for the jetson nano, i wanted to share the battery toghether with the flip 4, my doubt is, would a external load mess with the percentage/capacity gauge? if it will, i will use a 5V out + a diode for lowering the voltage to 4.3 as it would be recognized as a full lipo, thanks.)
  • 10:44, 18 August 2025 Lisa talk contribs posted a new comment on LVDS2 (Hello,There will be no updates at this time.)
  • 17:29, 16 August 2025 206.83.113.37 talk posted a new comment on X1202 (Given the Pi5 just needs 3.3V + GND, what are the chances of supplying an RTC power feed, directly from the UPS board?)
  • 12:48, 16 August 2025 187.194.46.217 talk posted a new comment on LVDS2 (Can there be future firmware updates for this card model? thanks)
  • 12:28, 11 August 2025 Lisa talk contribs posted a new comment on X735 (Hello, Yes, you can use the RPi4 Type C port as a USB data transfer. This has nothing to do with the X735.)
  • 12:25, 11 August 2025 Lisa talk contribs posted a new comment on X1200 (Hi, Yes, you can use the RPi5 Type C port as OTG.)
  • 12:03, 11 August 2025 Lisa talk contribs posted a new comment on X1200 (Hello, The X1200 UPS can be used together with the X1004, please refer to the installation video above.)
  • 12:00, 11 August 2025 Lisa talk contribs deleted comment #5951 on LVDS Adapter
  • 12:00, 11 August 2025 Lisa talk contribs posted a new comment on LVDS Adapter (Hello, you can get it from Geekworm Official Store [LVDS https://geekworm.com/products/lvds-to-hdmi-adapter-board-converter-with-lvds-cable?variant=39416497045592])
  • 11:59, 11 August 2025 Lisa talk contribs posted a new comment on LVDS Adapter (Hello, you can get it from Geekworm Official Store [https://geekworm.com/products/lvds-to-hdmi-adapter-board-converter-with-lvds-cable?variant=39416497045592])
  • 09:19, 10 August 2025 177.12.18.58 talk posted a new comment on X1200 (Can I use this ups combined with Geekworm X1004? Is there a problem that the dual nvme is connected to gpio?)
  • 04:59, 10 August 2025 59.127.176.217 talk posted a new comment on X735 (Hi. When the X735 provides power through 40-pin header to my RPi4b, can the USB Type-C port of my RPi4b still function as a USB data transfer (USB gadget/host mode)?)
  • 04:43, 10 August 2025 59.127.176.217 talk posted a new comment on X1200 (Hi. After powering my Raspberry Pi 5 via USB Type-C of X1200, can I use the original USB Type-C socket of my Raspberry Pi 5 for data transmission (such as USB OTG)?)
  • 04:35, 9 August 2025 42.108.83.83 talk posted a new comment on LVDS Adapter (How can I get it) Tags: Mobile web edit, Mobile edit
  • 09:35, 5 August 2025 166.199.170.42 talk posted a new comment on X1004 (Has anyone confirmed which M.2 NVMe SSDs the X1015 is Compatible with?) Tags: Mobile web edit, Mobile edit
  • 18:11, 3 August 2025 185.231.231.251 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (sorry. the switch is working.)
  • 18:07, 3 August 2025 185.231.231.251 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (How can i turn it on with the battery? The switch don't do nothing on my board.)
  • 11:48, 31 July 2025 Lisa talk contribs posted a new comment on X1202 (thanks for your feedback. Glad the issue is resolved.)
  • 11:45, 31 July 2025 Lisa talk contribs posted a new comment on X1202 (Hi,X1202 does not have RTC function.)
  • 02:45, 31 July 2025 98.226.70.24 talk posted a new comment on XScript (You can safely shutdown NASPi using the Raspberry Pi desktop power off by the following steps: 1) Create directory /etc/systemd/system/systemd-poweroff.service.d 2) Create /etc/systemd/system/systemd-poweroff.service.d/poweroff.conf [Service] ExecStartPre=/usr/local/bin/poweroff.sh 3) Create /usr/local/bin/poweroff.sh #!/bin/bash sudo /usr/local/bin/xSoft.sh 0 27 Save & Exit sudo chmod u+x /usr/local/bin/poweroff.sh)
  • 23:49, 30 July 2025 87.122.13.59 talk posted a new comment on X1001 (Hi, does not work for me with a Verbatim Vi3000 / 256 GB. Latest firmware.)
  • 18:26, 30 July 2025 88.202.249.32 talk posted a new comment on X1202 (I have resolved the issue! It was a software problem, and not a hardware problem. Your product is working fine! I was using a modified version of the suptronics software which was incorrectly monitoring the power while plugged in.)
  • 10:40, 30 July 2025 199.181.130.25 talk posted a new comment on X1202 (is there a rtc on the x1202 since i see a rtc0)
  • 09:33, 30 July 2025 Lisa talk contribs posted a new comment on X306 (Hello, "sudo shutdown -h now" is the OS shutdown command， only turns off the PI ZERO 2W, but does not cut off the power to X306. The X306 does not have a power management function， you can use the X306's power button to turn it off.)
  • 09:30, 30 July 2025 Lisa talk contribs posted a new comment on X950 software (Hi, Sorry, we don't have any information about Plexamp Headless. We recommend you to refer to the official DAC+ information. Hope to get your understanding.)
  • 16:09, 29 July 2025 80.203.53.211 talk posted a new comment on X950 software (Any info on how to get this working in Plexamp Headless?)
  • 20:40, 27 July 2025 62.74.24.234 talk posted a new comment on X306 (how can i cut power off in usb port or unbind a device?) Tags: Mobile web edit, Mobile edit
  • 14:46, 26 July 2025 62.74.24.234 talk posted a new comment on X306 (I am having v1.1 and a 4g usb LTE attached. When i "sudo shutdown -h now" my pi zero i still have power at the usb port. How can i cut the power to usb port when pi is off? Also, as everybody here, i want to monitor cut off and battery status, in the next version.) Tags: Mobile web edit, Mobile edit
  • 03:38, 26 July 2025 42.105.142.40 talk posted a new comment on VBO to HDMI (When I can buy it) Tags: Mobile web edit, Mobile edit
  • 10:36, 24 July 2025 Lisa talk contribs posted a new comment on X1206 (Hi, The X1206's USB port is only for 5V power output and does not support a mouse or keyboard. Hope to get your understanding.)
  • 10:40, 23 July 2025 179.60.64.162 talk posted a new comment on X1206 (How do I activate the two USB ports on the UPS X1206 motherboard? When connecting the devices, they are not recognized. I connect the mouse and it does not detect them, but it does detect them on the Raspberry Pi5 ports.)
  • 19:02, 21 July 2025 Lisa talk contribs posted a new comment on X1501 (Hi, You can refer to Raspberry Pi 5 [Document https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#real-time-clock-rtc])
  • 21:38, 18 July 2025 84.67.173.248 talk posted a new comment on X1501 (Are there any instructions on how to use the RTC?)
  • 19:28, 18 July 2025 Harry talk contribs deleted comment #5202 on X1011
  • 11:02, 18 July 2025 Lisa talk contribs posted a new comment on X1009 (We need you to provide installation pictures and test videos to troubleshoot and find the cause. It is difficult to determine the cause based on your description. could you please send pictures or videos via email, which is more convenient for communication. Hope to get your understanding.)
  • 18:47, 17 July 2025 2.220.128.133 talk posted a new comment on X1009 (Gotcha. No more Geekworm products for me, ever.)
  • 16:42, 17 July 2025 Lisa talk contribs posted a new comment on X1009 (Since we don't know how you use it, we can't analyze the cause. Please send the test video by email and please send a picture of the power supply you use.)
  • 21:09, 16 July 2025 2.220.128.133 talk posted a new comment on X1009 (@Lisa of course I already restarted, tried a different FCC, and even a different Raspberry Pi 5B. Took off all the harddrives and just had the naked shield connected - controller was not recognized in any of these cases. I just want to know what could have possibly caused this so I know whether to replace the broken one with a new one or migrate to another solution instead that doesn't involve an X1009.)
  • 11:08, 16 July 2025 Lisa talk contribs posted a new comment on NASPi (Hello, you can buy a PWM fan from Geekworm Sotre:[4010 FAN https://geekworm.com/products/4010-3pin-pwm-fan])
  • 11:07, 16 July 2025 Lisa talk contribs deleted comment #5922 on NASPi
  • 11:07, 16 July 2025 Lisa talk contribs posted a new comment on NASPi (Hello, you can buy a PWM fan from Geekworm Sotre:[https://geekworm.com/products/4010-3pin-pwm-fan])
  • 11:03, 16 July 2025 Lisa talk contribs posted a new comment on X1201 (Hi, you mean after disconnecting the power supply, the X1201 cannot power the RPi5 via the battery, right? Please send the test video by email <info@geekworm.com>. and tell us your order number， please.)
  • 07:57, 16 July 2025 107.116.170.94 talk posted a new comment on X1206 (You mentioned in a reply to a previous comment, that you can only provide the DXF file, like the last guy I also want to design a case for a specific use. Thank you!)
  • 20:52, 15 July 2025 82.16.62.128 talk posted a new comment on NASPi (I need a replacement fan for this: "Geekworm NASPi 2.5 inch SATA HDD/SSD NAS Storage Kit for Raspberry Pi 4 Model B" The bearing has worn out and it's making a lot of noise. Is the same fan used on the newer v2.0 NASPi? How can I order a new fan only? Thanks)
  • 18:51, 15 July 2025 68.197.206.6 talk posted a new comment on X1201 (When the x1201 is plugged in to USB-C power it detects my Pi and powers it. When I unplug from USB-C the detect Pi LED goes dark and the unit powers down. I am using high-quality, fully-charged Toshiba batteries. I’m pretty sure I have the Pi seated correctly on the pogos. Would the Pi detect LED light when connected to USB power even if the Pi wasn’t properly connected?) Tags: Mobile web edit, Mobile edit
  • 17:17, 15 July 2025 Lisa talk contribs posted a new comment on X-UPS1 (You can program it yourself to read the above PLD and LBAT pin GPIO signals to achieve your own more advanced functions such as low battery monitoring and power failure detection, which can be referred to the plsd.py file of X708-script. We do not provide example programs)
  • 17:11, 15 July 2025 Lisa talk contribs posted a new comment on X1201 (please refer to X1201 Hardware;)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"