Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 13:27, 6 February 2025 73.109.255.209 talk posted a new comment on X1003 (I am having an issue where I can see lspci output as: KIOXIA Corporation NVMe SSD Controller BG5 (DRAM-less) But I cannot see the drive when I use lsblk. The drive does not show up as an option even if I use the Pi imager. I have the latest EEPROM version too. Any thoughts?)
  • 12:36, 6 February 2025 Lisa talk contribs posted a new comment on X306 (please note that do not short the[ Pin 1 & 2]； What kind of 2pin switch are you using? please send a connection picture via email --support@geekworm.com)
  • 11:53, 6 February 2025 97.176.141.219 talk posted a new comment on X1202 (Why am I getting the following when trying to register? Permission error You do not have permission to do that, for the following reason: You are not allowed to execute the action you have requested.)
  • 03:33, 6 February 2025 104.28.54.66 talk posted a new comment on XScript (I have a NASPi. Unfortunatelly, the fan has a physical damage. I have a 3 pin 5 V noctura fan in my spare parts and tried to use this. It works so fare, but cant be controlled by the script. It runs all the time my max speed. What can i change in the script to adopt the noctura fan?)
  • 18:03, 5 February 2025 93.245.109.226 talk posted a new comment on NASPi CM4-M2 (I can confirm, that the official PoE HAT works for supplying power to the board. However, you must use header extensions to be able to plug it in and the remaining space for heatsinks is very limited due to case height.)
  • 02:59, 4 February 2025 173.35.170.176 talk posted a new comment on X729 (Does this product work with one 18650 rechargeable battery, or two batteries is a minimum requirement?)
  • 07:30, 3 February 2025 97.176.141.219 talk posted a new comment on X1201 (I am using an x1201 UPS Shield on a Raspberry Pi 5 Why am I getting an error after running this command? sudo python3 x120x/qtx120x.py QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root' Traceback (most recent call last): File "/home/rpi5/x120x/qtx120x.py", line 190, in <module> window = UPSStatusWindow() ^^^^^^^^^^^^^^^^^ File "/home/rpi5/x120x/qtx120x.py", line 119, in __init__ self.update_status() File "/home/rpi5/x120x/qtx120x.py", line...)
  • 22:13, 2 February 2025 118.38.167.141 talk posted a new comment on X1200 (Greetings, I typed "pinctrl set 16 op dl" in Raspberry Pi 5, but "Charging: disabled" in the display activated by "sudo python3 qtx120x.py.)
  • 12:06, 2 February 2025 188.27.56.36 talk posted a new comment on X1202 (Yes, I know all that, I appreciate the answer, the question is which of the pogo pings supply the power (GND and 5V)?)
  • 02:43, 1 February 2025 68.36.52.115 talk posted a new comment on X630-A8 (Hello. I am plan on using this board with existing project that already use some of the 40 pines on the Raspberry Pi. Is this board use all the Pi pins or are some still available for other project use?)
  • 03:00, 31 January 2025 95.91.225.185 talk posted a new comment on P173 (Which model(P173/P330/P373/ ...) contains the copper plate? As well, from where I can obtain the"backup"?)
  • 02:51, 31 January 2025 95.91.225.185 talk posted a new comment on P173 (Wo kann ich die Kupferplatte des backup kaufen, wo gibt es Kupferpaste? Where kann I order/buy the copperplate? Where can I buy the copperpaste?)
  • 00:01, 31 January 2025 176.103.179.29 talk posted a new comment on X1015 (why no wifi and ethernet with X1015 V1.2 on raspberry PI5)
  • 09:48, 30 January 2025 104.28.40.105 talk posted a new comment on X1011 (Hi i am having same issue as below. I can write to any 1 or even 2 of the drives in any combination and all tests work without errors. As soon as I write to 3 or 4 thats when i see controller down will reset. Looks like i am not alone. Are these boards not intended to be able to write to all 4 at the same time?) Tags: Mobile web edit, Mobile edit
  • 02:28, 30 January 2025 96.250.176.39 talk posted a new comment on X1004 (Is it stackable? Can I put another X1004 on top for a total of (4) NVMEs?)
  • 20:20, 28 January 2025 128.106.70.48 talk posted a new comment on P580 (P580 case hi ka Lo order thei ang em?) Tags: Mobile web edit, Mobile edit
  • 01:41, 28 January 2025 37.19.200.23 talk posted a new comment on X306 (The 1.3v, does the pi OTG plug still not available?) Tags: Mobile web edit, Mobile edit
  • 01:14, 28 January 2025 172.56.115.195 talk posted a new comment on P511 (How do they fare with a POE HAT?) Tags: Mobile web edit, Mobile edit
  • 13:49, 25 January 2025 98.97.74.109 talk posted a new comment on NASPi Gemini 2.5 (I put this together without any difficulty. Unfortunately, I have yet to get Media vault to function. Several flashes later and following the guide to the letter, Nothing.)
  • 10:25, 25 January 2025 73.70.118.131 talk posted a new comment on X306 (How to turn off with the external momentary switch. 4 pin header has been soldered, and switch connected to pins 3 & 4. Short press on external momentary switch will power on but long press on the external switch does not power off. How to power off with external momentary switch?)
  • 18:27, 24 January 2025 Lisa talk contribs posted a new comment on X728-hardware (Sorry, I don't get what you mean. Please, explain once more. Have you successfully installed the safe shutdown script?【I have to cycle power twice】==software shutdown or Force shutdown via switch?)
  • 15:20, 24 January 2025 178.25.154.48 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I reported same issues some days ago (Anonymous user #21). Finally I found out that there was a soldering error. The board could not work and it was not due to the SSD. Check whether the components on the circuit board may not be in the correct position. That might be the reason. In this case, the board must be replaced.)
  • 15:16, 24 January 2025 178.25.154.48 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I can confirm the experiences of Anonymous user #22. I have a X1002 V1.1, latest RPI 5 firmware and a WD Blue SN580. The SSD is recognised and works at first, but behaves unstable under high load. Thus, I do not recommend WD Blue 580, but I have good experience with Kioxia Exceria G2.)
  • 11:53, 22 January 2025 Lisa talk contribs posted a new comment on X1001 (Thanks for the update.【WD Black SN850 series; WD Black SN770; WD SN740】all have compatibility issues. Please refer to the above information: 【NVMe SSD Incompatibility List】)
  • 11:33, 22 January 2025 Lisa talk contribs posted a new comment on X1201 (Hi,we have replied your question via email, please check. thanks.)
  • 11:30, 22 January 2025 Lisa talk contribs posted a new comment on X1201 (Hi,Sorry for the wrong description, it is updated now, X1201 only support 5V.)
  • 10:17, 22 January 2025 24.211.221.158 talk posted a new comment on X1001 (Update: I ended up just returning my WD SN770 and ordering a Samsung 970 EVO Plus. It's working much better.)
  • 20:16, 21 January 2025 49.182.91.142 talk posted a new comment on X1201 (Can I supply 12v to the XH2.54 socket labeled 5v in on my x1201? The info at the top says 9-18v but then further down it says 5v..) Tags: Mobile web edit, Mobile edit
  • 18:49, 21 January 2025 192.122.132.233 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (How did you achieve such a high read/write speed? Are you using x1005 or which SSD hat?)
  • 18:46, 21 January 2025 192.122.132.233 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I managed to make it work. But the performance I am getting might not the best. I have seen a comment here showing 900MB+ speed, but I am getting 400- MB only. Is there a way to optimize this? I set the pciex1_gen=3, and updated to the latest firmware.)
  • 13:38, 21 January 2025 211.30.159.146 talk posted a new comment on X1201 (I recently purchased the x1201 for my Pi5 and When using the “sudo i2cdetect -y 1” command I get nothing, 1 doesn’t exist for me, I can only detect 11 and 12 and they do not show the 0x36 address. I have checked all pin connections with a multimeter and they are all making good contact. What else could it be? Thanks) Tags: Mobile web edit, Mobile edit
  • 13:22, 21 January 2025 66.235.15.173 talk posted a new comment on X1202 (I was wrong. On further testing, I think the GPIO16 driven high does disable the charger and does not continue raising the battery voltage. I previously incorrectly assumed two things: 1. I thought the board design would always be running the pi5 from battery voltage. This would be a simple "dual conversion" setup. Instead, the board appears to not run the pi5 from battery voltage when sufficient input power is available, even if the charger is disabled. This is great. 2. I incorrectly...)
  • 12:03, 21 January 2025 66.235.15.173 talk posted a new comment on X1202 (For completeness, I also tried both the USB-C x1202 input, and 12V into the DC input on the x1202. This didn't make any difference; the charging continued despite driving GPIO16 high and despite the CHG LED being off. The board seems to work well aside from not turning the charging off when GPIO16 is driven high.)
  • 11:06, 21 January 2025 66.235.15.173 talk posted a new comment on X1202 (On my x1202, driving GPIO16 high, the charging LED stops blinking (so the pogo pin is making contact with HW pin 36), but the actual charging doesn't stop. I have tried with the pin set as input with both "pull up" and "pull down", and with the pin set as output and driving it high vs low. Pulled high or driven high, the CHG LED stops blinking, but ... battery volts continue increasing until ~4.15V. Overall, I'm not sure if turning the charger on and off to zig-zag near a lower voltage is a...)
  • 03:53, 21 January 2025 24.211.221.158 talk posted a new comment on X1001 (!!! Nevermind... still failing :(.)
  • 00:18, 21 January 2025 81.197.7.236 talk posted a new comment on X728-hardware (I'm using following code for shutdown: GPIO.output(GPIO_PORT, GPIO.HIGH) time.sleep(3) GPIO.output(GPIO_PORT, GPIO.LOW) I have auto power-on jumper inserted. Why do I have to cycle power twice to turn the Raspberry back on?)
  • 18:12, 20 January 2025 Lisa talk contribs posted a new comment on X1009 (X1206 UPS（5V power out） not support X1009（12V power input）.please refer to X-UPS1)
  • 18:11, 20 January 2025 Lisa talk contribs posted a new comment on X1206 (X1206 UPS（5V power out） not support X1009（12V power input）.please refer to X-UPS1)
  • 12:07, 20 January 2025 24.211.221.158 talk posted a new comment on X1001 (Thanks! This fixed random I/O errors I was experiencing with a WD_BLACK SN770 SSD and a Raspberry Pi 5. The symptoms were similar to that of "Anonymous user #20". It would boot fine but soon after some paging errors would appear in the journal and commands would fail with I/O errors (or it would just say command not found). Booted using an SD card temporarily, ran rpi-update, and booted back into the SSD. Everything works normally now.)
  • 23:53, 19 January 2025 213.125.50.74 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I've been using a WD Blue SN580, as marked as solved in the top of this topic. Anonymous12 writes after updating eeprom it al works. For me this was NOT the case for my WD SN580. Even after upgrading to latest jan 2025 eeprom the drive does not run stable. Yes it boots now, and from time to time seems to work. But after some time you see numerous I/O errors which makes the drive completely inaccessible. It never runs for more than 24 hours, requiring a reboot for it to start working again. T...)
  • 06:08, 19 January 2025 93.234.25.123 talk posted a new comment on X1009 (Can the X1009 and the X1206 be used together with one board? If so, which of the two do you plug the power cable into?)
  • 06:08, 19 January 2025 93.234.25.123 talk posted a new comment on X1206 (Can the X1009 and the X1206 be used together with one board? If so, which of the two do you plug the power cable into?)
  • 00:52, 19 January 2025 178.25.154.48 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Same here. Yesterday, I bought a WD Blue SN580 and it does not work with X1002 and latest firmware.)
  • 04:51, 18 January 2025 174.54.172.229 talk posted a new comment on X1001 (I had the 2TB Samsung 980 Pro working great until I added a pi 5 cooler. After that it no longer recognized the drive. Blue light stays on, but no boot and lspci shows nothing connected. Put the drive in a usb enclosure and it boots fine from that. Very confused why this is. I guess I'll try another drive soon.)
  • 15:57, 17 January 2025 194.88.96.84 talk posted a new comment on X728 (Having followed your advice in reply to #73, the battery capacity. Only goes up to 80% and then once it reaches this it begins to drop! I also have an X1202 and the same batteries but this goes up to 100% and takes 10-12 hours to discharge. The x728 with the same batteries is taking only 1-2 hours from 80% (max it seems to go to) to discharge to 0.) Tags: Mobile web edit, Mobile edit
  • 03:32, 17 January 2025 81.56.119.189 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (The documents are useless are they are generic about the chips and there is no schematic for this specific board model. Anyways if anybody needs, the only way is via voltage divider to ADC pin (GPIO32 to 39) using two 100K Ohm resistors... the voltage can be calculated using the formula: (readAnalog(pin) / 4095) * 3.3 * 2 (also adding a fixed value to calibrate the result is suggested, based on measurements with multimeter))
  • 19:26, 16 January 2025 31.173.21.207 talk posted a new comment on KVM-A3 (do you resolve issue ? i have the same..)
  • 15:21, 14 January 2025 Harry talk contribs posted a new comment on X1201 (This error occurs when Python cannot find the PyQt5 module. It usually happens if PyQt5 is not installed or if the Python interpreter is not correctly configured. '''Solution''' '''1. Install PyQt5''' Ensure that PyQt5 is installed using pip. Open your terminal or command prompt and run: <pre>pip install PyQt5</pre> '''2. Verify Installation''' Check if PyQt5 is installed correctly by running: <pre>pip show PyQt5</pre> This command will display the installation details of PyQt5, inclu...)
  • 15:20, 14 January 2025 Harry talk contribs deleted comment #5470 on X1201
  • 15:20, 14 January 2025 Harry talk contribs posted a new comment on X1201 (This error occurs when Python cannot find the PyQt5 module. It usually happens if PyQt5 is not installed or if the Python interpreter is not correctly configured. '''Solution''' '''1. Install PyQt5''' Ensure that PyQt5 is installed using pip. Open your terminal or command prompt and run: pip install PyQt5 '''2. Verify Installation''' Check if PyQt5 is installed correctly by running: pip show PyQt5 This command will display the installation details of PyQt5, including the path where it...)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"