X630-A8

From Geekworm Wiki
Jump to navigation Jump to search

X630-A8 V1.7 VS V1.8
X630-A8-Front
X630-A8-Rear
X630-A8 Standard height PCIe Add-in Card I/O Bracket
X630-A8
X630-A8
PiKVM-A8: X630+X630-A8 for Pi 4

Overview

X630-A8 is an accessory for PiKVM-A8 (Raspberry Pi 4 based KVM over IP, PCIe version),the complete kit or other Geekworm PiKVM version, please refer to PiKVM

PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!

PiKVM-A8 PCIe Version allows user to realize a PiKVM / KVM project with Raspberry Pi 4.

NO extral connection wire require, easy to assemble and use.

Features

  • Designed especially for PiKVM (Raspberry Pi 4-based KVM over IP)
  • Installs justs like any PCI card into a tower / desktop PC
  • Fully compatiblie with PiKVM OS
  • Reliable remote network access to servers and computers
  • HDMI Full HD capture based on the TC358743 chip (from X630)
  • OTG Keyboard & mouse; Mass Storage Drive emulation
  • Hardware Real Time Clock (RTC) with CR1220 coin battery socket
  • Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
  • Equipped with photocoupler to protect RPi GPIO pins from computer and ESD spikes
  • PoE Supported – Power over Ethernet for simplified installation
  • Also supports for powering via USB-C
  • Reserves the PH2.04P connector for I2C OLED display

Packing List

  • 1 x X630-A8 V1.7 Expansion Board
  • 1 x FPC cable (Length: 5cm)
  • 1 x ATX Control Cable (Length: 52cm)
  • 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm)
  • 1 x USB3.0 IDC to TYPE-C (Length: 45cm)
  • 1 x Standard height PCIe Add-in Card I/O Bracket
  • 4 x M2.5x12mm F/F Spacers
  • 8 x M2.5x6mm Screws
  • 1x X630-A8-CAB V1.1 Camera Adapter board
  • 2 x PM3x6mm Screws
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #1

11 days ago
Score 0++

Hello. I am plan on using this board with existing project that already use some of the 40 pines on the Raspberry Pi.

Is this board use all the Pi pins or are some still available for other project use?

Lisa

6 days ago
Score 0++
KVM-A8 is built into the chassis and does not have a 40-pin header reserved for expansion of other applications.