Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 18:44, 29 March 2022 Harry talk contribs posted a new comment on X715 Software (run sudo apt-get -y install python-rpi.gpio python3-rpi.gpio)
  • 13:39, 29 March 2022 77.248.75.29 talk posted a new comment on P173 (After two days of 53°C It now runs at 46°C, I have no idea why it cooled. The load is still 1. but it's good to see that the P173 cools the same as a heatsink and fan.)
  • 02:05, 29 March 2022 37.248.176.74 talk posted a new comment on X708-Software (Lisa, I know it's for power management. The x708softsd.sh script uses GPIO13 to perform a software shutdown. The question is: how? Does it just turn off the power on the board or does it somehow emulate the pressing of the button (GPIO5) and the proper shutdown is then performed by the x708pwr.sh script?)
  • 17:03, 28 March 2022 Lisa talk contribs posted a new comment on X857 (Hello， How did you install it? X728 UPS powers Pi4 via GPIO, Pi4 powers X857 through USB3.0 connector, no need to connect the x728 to the SSD.)
  • 16:47, 28 March 2022 Lisa talk contribs posted a new comment on X708-Software (Hi， GPIO13 for power management；please referX708-Hardware)
  • 01:08, 27 March 2022 50.35.78.224 talk posted a new comment on X857 (I am unable to get the X857 to work with the X728, I've tried wiring the 5V out of the UPS board to the 5V in on the SSD. Problem: The SSD disconnects randomly intermittently. I can use either on their own and things work. I've also purchased a 5V/6A external support for the UPS board as this seem to me to be a power problem. Any advice please?)
  • 16:12, 26 March 2022 77.248.75.29 talk posted a new comment on P173 (First off: i have no rights to register? I had a heatsink and a fan. Running on 5V it had a temperature of about 47 °C. At 3.3V is was 53°C. Afters installing the P173 rhe temperature of the (quite busy) server was 52°C. Nice!) Tags: Mobile web edit, Mobile edit
  • 23:32, 25 March 2022 5.174.167.35 talk posted a new comment on X708-Software (Could you explain what does enabling high state on GPIO13 does on v1.2 board? There is no schematic of the board.)
  • 10:26, 25 March 2022 Lisa talk contribs posted a new comment on X735 Software (Hi, Please also remove the blue wire and test. please refer hereNASPi#FAQ -- Q10)
  • 10:11, 25 March 2022 Lisa talk contribs posted a new comment on NASPi (Hello, Support Max. 9.8mm thickness 2.5" HDD/SSD, you can choose 7mm or 9.5mm thickness HDD/SSD.)
  • 10:00, 25 March 2022 Harry talk contribs posted a new comment on X880 (Hi, We don't really recommend you to do this, because it will shorten the life of the hard drive. If you still insist, you can cancel the 5-minute hibernation by upgrading the firmware, please contact email: felix@suptronics.com)
  • 09:48, 25 March 2022 Lisa talk contribs posted a new comment on X735 Software (please refer hereX-C1 Software#FAQ)
  • 04:54, 25 March 2022 145.224.67.185 talk posted a new comment on NASPi (Can you please tell me what the Max size of SSD this setup would support ? Thanks)
  • 01:06, 25 March 2022 104.251.66.141 talk posted a new comment on X728-Software (When I try sudo systemctl enable x728-shutdown.service I get the following error Failed to enable unit: File x728-shutdown.service: Bad message)
  • 11:01, 24 March 2022 47.54.161.186 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (It would be very helpful to know what the model of the display is. I have been trying to set up one of these in ESPHome using the ssd1306 module but it's not working. I'm not sure if that is what this is using.)
  • 10:12, 24 March 2022 Lisa talk contribs posted a new comment on X880 (The x880 defaults to 5 minutes of standby, but you can change that. If you need help, please contact us [support@geekworm.com].)
  • 09:53, 24 March 2022 Lisa talk contribs posted a new comment on X708-Software (Hi， you can refer 【Anonymous user #17】 please try to [sudo apt-get install python3-smbus] to test.)
  • 23:56, 23 March 2022 213.5.5.79 talk posted a new comment on X880 (NAS disks do not like being turned on and off. This works to the detriment of NAS disks and significantly shortens the performance. NAS drives are designed to work 24/7. I found a solution to this problem - it should be added to CRON * / 4 * * * * root hdparm -C / dev / sdX There was no information about it when buying - in this case, I would not buy the X880)
  • 17:58, 23 March 2022 37.248.177.219 talk posted a new comment on X708-Software (When I enable I2C in raspi-config I get this: modprobe: FATAL: Module i2c-dev not found in directory /lib/modules/5.10.92-v8+ This command: sudo apt-get install python-smbus throws this: Package python-smbus is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'python-smbus' has no installation candidate)
  • 11:27, 23 March 2022 Lisa talk contribs posted a new comment on T208-hardware (Hi， Please unplug the power plug first, and then unplug the power cord connected to the T208.)
  • 11:23, 23 March 2022 35.141.58.113 talk posted a new comment on X735 V2.5 Software (Hi Lisa, The yellow wire was removed from the 4 pin molex, still no fan. Sorry we haven't tested openmediavault, you can unplug the yellow wire to make the fan spin.)
  • 11:19, 23 March 2022 Lisa talk contribs posted a new comment on X880 (Hi， It will go to sleep when there is no data to read or write, which can greatly protect the HDD.)
  • 11:04, 23 March 2022 Lisa talk contribs posted a new comment on X735 V2.5 Software (Hi， please check if you install the pigpio liberary.)
  • 10:57, 23 March 2022 Lisa talk contribs posted a new comment on X735 V2.5 Software (Hi， Sorry we haven't tested openmediavault, you can unplug the yellow wire to make the fan spin.)
  • 10:46, 23 March 2022 Lisa talk contribs posted a new comment on X728 (Hi， Yes，you can use [5v IN XH2.54], but please note ：DO NOT connect 5V to the BATT connector, this is very dangerous.)
  • 10:44, 23 March 2022 Lisa talk contribs posted a new comment on X708-Hardware (Hello, You can also refer to this link to adjust the fan speed： http://www.suptronics.com/miniPCkits/x708_v2.0-software.html)
  • 10:43, 23 March 2022 Lisa talk contribs deleted comment #2425 on X708-Hardware
  • 10:26, 23 March 2022 Lisa talk contribs posted a new comment on X708-Hardware (Hi， The x708 fan does not support adjusting the speed. Hope to get your understanding.)
  • 10:23, 23 March 2022 Lisa talk contribs posted a new comment on X728-hardware (Hi， You can also refer to this link for X728 v2.0/2.1/2.2 versions；http://www.suptronics.com/miniPCkits/x728_v2.2-software.html)
  • 09:56, 23 March 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hi， You can modify the fan's script to stop it.)
  • 09:44, 23 March 2022 Lisa talk contribs posted a new comment on X630-C1 (Hi， There is currently no metal case for X630 + Pi Zero, you can consider using an acrylic case.Thanks.)
  • 09:30, 23 March 2022 Lisa talk contribs posted a new comment on X708-A1 (Hi， Yes，The x708-A1 supports stacking.)
  • 16:54, 22 March 2022 77.164.150.124 talk posted a new comment on X735 V2.5 Software (I'm getting an error after "sudo bash install.sh": Can't connect to pigpio at localhost(8888) Did you start the pigpio daemon? E.g. sudo pigpiod Did you specify the correct Pi host/port in the environment variables PIGPIO_ADDR/PIGPIO_PORT? E.g. export PIGPIO_ADDR=soft, export PIGPIO_PORT=8888 Did you specify the correct Pi host/port in the pigpio.pi() function? E.g. pigpio.pi('soft', 8888) %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)
  • 00:37, 22 March 2022 35.141.58.113 talk posted a new comment on X735 V2.5 Software (fan does not work with openmedia vault. I did test on light version and fan did work with the scripts provided. any way to get this work with openmediavault?)
  • 15:56, 19 March 2022 1.157.113.202 talk posted a new comment on X728 (OP here, the reason I am asking is that I tried to supply power to this hat through the port from a LM2968 buck convertor but the converter belw up. If I can't supply power in to the 5v XH2.54 connector, I will have to wire it in to the barrel jack (or maybe using dupont connectors straight on to the GPIO pins??????))
  • 13:21, 19 March 2022 31.208.117.48 talk posted a new comment on X708-Hardware (Hi! I can't find any script on how to set the fan speed to high/low: "GPIO16 for fan speed: HIGH => fast, LOW=> slow" "New added on V1.2". I don't know if it is running high or low now, but the case fan sounds as an airplane that is about to take off from my desktop. This is unacceptable. There must be a way to turn it off when not needed and only turn it on at very high temperatures. If there is a high and low settings too i really want to know how to change it between these two mode.)
  • 11:52, 19 March 2022 1.157.113.202 talk posted a new comment on X728 (On the underside of the X728 is a 5v in port (just under the barrel jack). Can this be used to supply power to the hat, or can I only use the barrel jack or USB C port?) Tags: Mobile web edit, Mobile edit
  • 00:19, 19 March 2022 213.5.5.79 talk posted a new comment on X880 (x880 automatically puts disks to sleep when idle? I have a problem because NAS HDD drives park the head every 5 minutes. When connected directly to the raspberry pi via USB, they work without falling asleep.)
  • 01:57, 18 March 2022 174.32.160.19 talk posted a new comment on X728-hardware (I have a V 2.1)
  • 01:56, 18 March 2022 174.32.160.19 talk posted a new comment on X728-hardware (Hi, RPi4/4GB, all updates & upgrades; cloned and installed files from Git this morning (20220317). Blue button only works to force shutdown (>8 seconds press), and when I run the battery monitor script (I moved it to a "Scripts" directory in my Pi/Home), I get this error: pi@raspberrypi:~ $ sudo python /home/pi/Scripts/x728bat.py /home/pi/Scripts/x728bat.py:14: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings. GPIO.setup(G...)
  • 01:08, 18 March 2022 174.32.160.19 talk posted a new comment on X728-Software (@Anonymous user #27, Thanks for your detailed and informative comment about an alternative to using crontab... But for those of us who are not *nix experts, would you please explain *why/how* your script is much better? Thanks!)
  • 00:07, 15 March 2022 151.253.59.86 talk posted a new comment on T208-hardware (Hello, I have been trying to use the jetson nano A02 with T208 with all the batteries installed. When I turn it on from the blue button, it does turn on, and switches off normally, but im finding difficulties with the AON. When the device is off and is provided with power, it automatically switches on. But when electricity is lost (irrespective of how long) and is back on, AON switches on the device only on power cut and switches off when powered unless done manually in order to calibrate....)
  • 22:22, 12 March 2022 88.22.184.246 talk posted a new comment on X-C1 Software (How can the fan be stopped without pulling out wires? The fan control script does nothing on debian 11.2 aarch64 I'd like to start/stop fan on demand.)
  • 05:29, 12 March 2022 104.251.66.141 talk posted a new comment on X728-Software (Has anybody else tried this? I new to Linux and Raspberry PI, although not new to computers or programming. TIA)
  • 03:12, 12 March 2022 175.143.177.47 talk posted a new comment on X630-C1 (Given the X630 also supports Pi Zero/Zero 2, do you have a version of the X630-C1 case for Pi Zero/Zero 2 with X630?) Tags: Mobile web edit, Mobile edit
  • 23:55, 11 March 2022 87.207.129.183 talk posted a new comment on X708-A1 (Hey, I have two X708-A1, can I connect one to the other with a smaller connector?)
  • 18:43, 9 March 2022 Lisa talk contribs posted a new comment on T208-Software (Hi， you can use the python 'Pld.py' to check the input charge. Refer to step 7 above)
  • 18:42, 9 March 2022 Lisa talk contribs deleted comment #2404 on T208-Software
  • 15:52, 9 March 2022 Lisa talk contribs posted a new comment on DACPi (Hi， please refer X950 software#Volumio)
  • 15:40, 9 March 2022 Lisa talk contribs posted a new comment on T208-Software (Hi， you can use the python 'Pld.py' to check the input charge. Refer to step 8 above)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"