Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 10:38, 17 February 2022 Lisa talk contribs posted a new comment on X728-hardware (Hello， Yes, V2.0 / V2.1 version--the battery polarity directions are the same. Please install the battery according to the direction printed on the board. The installation manual is the previous version V1.2 / V1.3 Best regards)
  • 06:52, 17 February 2022 151.210.167.123 talk posted a new comment on X862 V2.0 (Hi there, has the EMI issue been resolved? what was the cause of the issue?)
  • 03:50, 17 February 2022 81.5.230.149 talk posted a new comment on X728-hardware (Hello, just got the X728 Board, V2.1 is printed on the side looking to the raspberry when installed. The direction of polarity in battery compartments are facing in the same direction. In the installation manual the batteries are facing in contrary directions, just to be sure and not to destroy anything: the v2.1 wants the polarity of the batteries like its printed: same direction, right? Thanks in advance and regards, Max)
  • 14:30, 15 February 2022 Lisa talk contribs posted a new comment on X728-Software (Hi， please refer to X728-Software#FAQ X728-Chip-Specifications and I2C address)
  • 04:57, 15 February 2022 193.36.225.26 talk posted a new comment on X728-Software (Hi, Where can I find information on the I2C protocol you use for your board. I know I am not the only one wanting to write my own software to interface to the UPS. I am currently developing some software (not related to the DC UP at all) and I would really like to integrate UPS monitoring into this software as it would be very useful indeed. Your documentation states that you use a particular chip for power management, but that's it. Please can you provide details such as which I2C addresses...)
  • 04:15, 15 February 2022 2.86.128.107 talk posted a new comment on X728-hardware (Hi Lisa, yes the AUTO ON is shorted, as i need to power on when the power returned. I will test first power adaptor but i think i have test it without any luck. Any another idea? I am writing a python code with all functions and email alert if power is OFF - ON - %. I will post it on github.)
  • 18:35, 14 February 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hi， For bullseye : please refer toX-C1 Software#For Raspbian / RetroPie / Twister OS v2.0.2)
  • 18:35, 14 February 2022 Lisa talk contribs deleted comment #2329 on X-C1 Software
  • 18:34, 14 February 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hi， For bullseye : please refer to[X-C1 Software#For Raspbian / RetroPie / Twister OS v2.0.2])
  • 18:28, 14 February 2022 Lisa talk contribs posted a new comment on X728 (Hello， Did you find the address [0x68] of the RTC with the command [sudo i2cdetect -y 1] ?)
  • 18:15, 14 February 2022 Lisa talk contribs posted a new comment on X728-hardware (Please remove the power adapter directly instead of the power cable to test.)
  • 18:12, 14 February 2022 86.62.71.213 talk posted a new comment on X708 (After some testing I can say it do not charge battery at all. External power supply is connected, LED flashing, but there is no 4.2V on battery pins, only current battery voltage (according charged level). I use 18650 Li-ion battery in x728)
  • 18:00, 14 February 2022 Lisa talk contribs posted a new comment on X728-hardware (Hello， This may happen if [Auto ON] is shorted. Please check whether the [Auto ON] is shorted.)
  • 11:44, 13 February 2022 23.127.128.93 talk posted a new comment on X728 (Hello - I am running Raspberry Pi OS Bullseye (January 2022 release). I followed the documentation as well as I could understand it. I ran 'sudo raspi-config' and enabled the I2C interface, then rebooted the Raspberry Pi with the X728 v2.1 installed. When I run dmesg, I see the following message displayed: i2c i2c-1: new_device: Instantiated device ds1307 at 0x68 i2c i2c-1: Failed to register i2c client ds1307 at 0x68 (-16) Is this something I should be concerned about? Also - I cloned t...)
  • 04:41, 13 February 2022 62.74.22.124 talk posted a new comment on X728-hardware (Hi, I am having v2.0. My problem is that every time i use "x728off" command to shutdown my Pi and then remove the power cable from the board, it is boot up. Any idea how to fix this?)
  • 19:43, 12 February 2022 5.95.179.77 talk posted a new comment on X-C1 Software (Hi, is there a version for "Debian GNU/Linux 11 (bullseye)"?)
  • 16:48, 11 February 2022 Lisa talk contribs posted a new comment on LVDS Adapter (Hello， Due to the wide variety of screens on the market, the EDID recognition of different screens may have compatibility issues. We cannot guarantee compatibility. Hope for your understanding. It supports 800P，you need to set single 8 mode：[Single 8, Support 480P/720p/768p/800P/960p etc.])
  • 15:10, 11 February 2022 14.192.245.77 talk posted a new comment on LVDS Adapter (Can this work with DS90C385AMT chip? And is this compatible with 800*600 resolution?)
  • 10:08, 11 February 2022 Lisa talk contribs posted a new comment on X735 (Hello， There is currently no such Case for Pi4 + X735)
  • 10:04, 11 February 2022 Lisa talk contribs posted a new comment on X728 (Hello， beacuse X728 has overcurrent protection and overvoltage protection Automatic safe shutdown when battery low (voltage <3.0V) Ultra-low standby power consumption to maximize battery life)
  • 04:46, 11 February 2022 89.64.87.242 talk posted a new comment on X728 (Oh It's me again! Just got above 3V and the current is now higher! I understand that if the voltage is extremely low then it charges very slowly in order not to destroy the cells. When voltage is above 3V it charges normally. Am I right?)
  • 04:44, 11 February 2022 89.64.87.242 talk posted a new comment on X728 (Hello geekworm! I've been findin X728v2.1 an excellent product! Very usefull and great quality for the price. I forgot to turn off RPi on standby mode and it drained my cells down to 2,97V. The Cell is Samsung INR18650-35E which has a 2.65V of cut-off voltage and therefore you rescued my cells! But when I plugged DC-Jack with 5,01V to X728 it draws only 0,15A current. So It's charging very slow or not at all. One of four battery diodes is blinking.)
  • 23:32, 10 February 2022 2.236.54.86 talk posted a new comment on X735 (Hi, do you have a case where place only RPi4 and The X735 V2.5 ? Regards)
  • 22:57, 10 February 2022 23.252.83.122 talk posted a new comment on X728 (I ripped off the buzzer. Couldn't take it anymore. Everything else works as it should for my testing purposes.)
  • 09:39, 10 February 2022 Lisa talk contribs posted a new comment on X728 (Hi, could you please send us some test videos？and tell us your order number,please send to <support@geekworm.com>；thanks~)
  • 03:30, 10 February 2022 99.190.220.117 talk posted a new comment on NASPi (Is there a way to change the boot order? There are times I want to boot from an SD card rather than the internal drive.)
  • 00:06, 10 February 2022 23.252.83.122 talk posted a new comment on X728 (Plug power in and it still buzzes. Installed the python scripts from github. They work fine and says AC power is connected. I even wrote my own python script to turn pin 20 to 0 and IT STILL IS BUZZING. Can I return this? Bought on amazon)
  • 23:26, 9 February 2022 23.252.83.122 talk posted a new comment on X728 (I plug in power supply without anything plugged in. No pi or batteries. Blue light comes on. Press the power button and it beeps continuously. Add batteries, still beeps. What do I do with pin 20 to get it to stop beeping?)
  • 11:17, 9 February 2022 Lisa talk contribs posted a new comment on X708 (Hi， The x708 can charge the batteries in power off state.And the battery indicator flashes to show the charging status. Please check whether the power supply is connected to the x708 and whether the power supply is in poor contact.)
  • 11:01, 9 February 2022 Lisa talk contribs posted a new comment on X728 (Hello, 1/ X728 V2.1 add a buzzer controlled by CPIO 20; please plug in the power supply to the X728 without raspberry pi , and turn it on to check if it is still calling; if not, please check GPIO 20 is occupied. Raspberry Pi Tutorial: How to Use a Buzzer: please refer to :X728-Software#FAQ)
  • 10:50, 9 February 2022 Lisa talk contribs posted a new comment on X735 V2.5 Software (Hello, Sorry,we have not tested it on openmediavault yet, please try to test it on RASPBIAN.)
  • 08:10, 9 February 2022 23.252.83.122 talk posted a new comment on X728 (I just got my board today and put batteries in and USB c power and I can't get it to stop buzzing. Hold button to shutdown and restart and its still buzzes.)
  • 03:05, 9 February 2022 85.85.181.152 talk posted a new comment on X735 V2.5 Software (Hello, I just followed the steps to install X735 V2.5 Software, I have openmediavault installed in raspberry pi os Lite. After I install the software above, I reboot and the Raspberry always powers off, do you know why this happens?)
  • 15:58, 8 February 2022 86.62.71.213 talk posted a new comment on X708 (It is appear x708 do not charge batteries in power off state. USB tester shows 5V/0.02A and batteries do not charged after 10 hours.)
  • 15:00, 8 February 2022 Lisa talk contribs posted a new comment on X735 V2.5 Hardware (Hello， pin#38(GPIO20) for power management.please refer to [Pins and GPIO used] above. X735 cannot share PIN with other devices, otherwise power management will not work properly.)
  • 14:56, 8 February 2022 Lisa talk contribs posted a new comment on X703 (Hello， X703 not support reading battery voltage and percentage.)
  • 14:30, 8 February 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hello, Could you please tell us more details？ What is the error message when installing the script?)
  • 14:19, 8 February 2022 Lisa talk contribs posted a new comment on NASPi (Hello, Please refer X-C1 Software)
  • 14:18, 8 February 2022 Lisa talk contribs posted a new comment on NASPi (Hi， PWM fans require proper scripting to work. Please refer hereX-C1 Software)
  • 14:13, 8 February 2022 Lisa talk contribs posted a new comment on UPS3 power off guide (Hello， Yes, you can measure whether the gpio6 is really a logic 1 according to the configured driver. Delayed shutdown function: please try to implement through software.)
  • 11:23, 8 February 2022 Lisa talk contribs posted a new comment on X883 (Hello，friend Could you please tell us more details， and send some test pictures or videos？send to 【support@geekworm.com】； Thanks.)
  • 11:18, 8 February 2022 Lisa talk contribs posted a new comment on X883 (Hello， There is no matching case yet.)
  • 11:17, 8 February 2022 Lisa talk contribs posted a new comment on 2.8 inch Touch Screen for Pi zero (Hello， Realy sorry, we are not sure yet. Geekworm)
  • 11:14, 8 February 2022 Lisa talk contribs posted a new comment on UPS3 (Hello， Sorry， It is not supported.)
  • 11:09, 8 February 2022 Lisa talk contribs posted a new comment on UPS3 (Hello， Auto ON is a hardware function and not affect system updates. Please refresh the system and try again.Thanks.)
  • 09:21, 8 February 2022 50.104.73.246 talk posted a new comment on NASPi (I'm having trouble booting Ubuntu from the SSD. Are there additional steps to get the NASPi booting Ubuntu from a SSD?)
  • 05:30, 7 February 2022 75.55.156.69 talk posted a new comment on Raspi UPS HAT Board (we have purchased a few of these and are attempting to design a 3d printed case. is there a cad file available?)
  • 02:27, 4 February 2022 174.250.26.10 talk posted a new comment on X883 (This thing died after 3 days of use... Tried to access my files and only HDD2 was showing up. HDD1 doesn't connect to the raspberry... Even the LED on this thing for HDD1 is off. Tried to swap drives but only the disk that's plugged to HDD1 sata will be on.) Tags: Mobile web edit, Mobile edit
  • 01:00, 4 February 2022 217.128.62.46 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (hello, do you have any updates on the availabilities?)
  • 18:27, 3 February 2022 77.171.197.67 talk posted a new comment on X703 (Can battery % be read?)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"