Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 00:35, 15 August 2021 90.79.45.205 talk posted a new comment on X880 (Bonjour, peut on booter le RPI4, sur les disques SSD ?)
  • 14:46, 12 August 2021 Lisa talk contribs posted a new comment on X728 (Hi，If the voltage across the capacitor is also 3.7V, then it is very likely that the chip is burned out（next to the upper right corner of the ups [2R2] ）. Please check it.)
  • 10:33, 12 August 2021 Lisa talk contribs posted a new comment on X715 Software (Hi，sorry x715 canceled the safe shutdown function)
  • 10:33, 12 August 2021 Lisa talk contribs deleted comment #1768 on X715 Software
  • 10:33, 12 August 2021 Lisa talk contribs posted a new comment on X715 Software (Hi，sorry x715 canceled the safe shutdown function)
  • 01:08, 12 August 2021 82.6.0.80 talk posted a new comment on X728 (the mosfet blew so I replaced it but it only outputs 3.7v now. What could have caused this? i see no other damage on the board.)
  • 20:41, 11 August 2021 46.44.159.48 talk posted a new comment on X715 Software (Hi Geekworm! Is there a way to shut down the X715 after the Pi shut down? (as the momentary switch has been removed, poweroff now needs to come after a safe shutdown of the Pi))
  • 09:47, 11 August 2021 Lisa talk contribs posted a new comment on P173 (Hi，that copper sheet needs to be used together with silicone grease for better heat dissipation effect.)
  • 21:38, 10 August 2021 178.0.39.64 talk posted a new comment on P173 (I've got this cute little case with a plate of copper for the cpu. But how can i attach this on the processor without slipping, when i close it?)
  • 12:29, 10 August 2021 Harry talk contribs posted a new comment on X735 V2.5 Software (Refer to X735_V2.5_Software#For_DietPi)
  • 12:14, 10 August 2021 Lisa talk contribs posted a new comment on X735 V2.5 Software (Hello，We have updated it, please refer to the above. Jumper function please refer to X735 V2.5 Hardware)
  • 11:27, 10 August 2021 24.70.34.213 talk posted a new comment on NASPi (how do i delete the script to set it back to original? raspberrypi 4 with retropie, safe shutdown isnt working proper)
  • 07:41, 10 August 2021 73.234.40.142 talk posted a new comment on X735 V2.5 Software (Fan not turning on … using a Raspberry Pi 4B running DietPi. Not sure where to place the jumper. No case attached.) Tags: Mobile web edit, Mobile edit
  • 10:32, 9 August 2021 Lisa talk contribs posted a new comment on LVDS Adapter (Hello，realy sorry，we cannot disclose the IC datasheet because of the confidentiality agreement.)
  • 04:52, 9 August 2021 89.77.48.187 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hi, Is there any way to monitor build in 18650 battery voltage? Nick)
  • 02:39, 8 August 2021 47.196.140.135 talk posted a new comment on LVDS Adapter (Is it possible to supply the I2C register definitions of the IT6263 chip? I'd like to write my own firmware for the board to integrate into a specific project.)
  • 14:14, 6 August 2021 Lisa talk contribs posted a new comment on DAC II (Hi，Because of the power amplifier, we recommend that the volume does not reach 100.and please consider using software for volume.)
  • 11:56, 6 August 2021 Lisa talk contribs posted a new comment on HDMI TO CSI-2 (Hi，can gopro5 force HDMI output? In addition, have you tried the EDID method? Please contact us support@geekworm.com； and please tell us your order NO.)
  • 11:33, 6 August 2021 Lisa talk contribs deleted comment #1753 on HDMI TO CSI-2
  • 07:47, 6 August 2021 73.89.181.105 talk posted a new comment on DAC II (I have same issue.)
  • 20:54, 5 August 2021 47.251.4.198 talk posted a new comment on HDMI TO CSI-2 (First of all, can gopro5 force HDMI output? In addition, have you tried the EDID method? You can ask me questions in my email, 1767893964@qq.com , I'll send you my usage)
  • 16:27, 5 August 2021 23.81.176.114 talk posted a new comment on HDMI TO CSI-2 (Hi, I have a GoPro Hero 5 like the one in the demo video. I have the camera interface enable on my Raspberry Pi 4 and video0 is in /dev. And I did all the driver config I tried to run the script in FAQ - A2. It's giving me error saying "camera is not enable. try running 'sudo raspi-config'". Also, my GoPro has the output when I plug it into a monitor, but when I plug it into this module, it's not going into the HDMI output mode. I tried 1080p 24, 1080p 25, 720p 24. None of them work. Please s...)
  • 10:38, 5 August 2021 Lisa talk contribs posted a new comment on X825 V2.0 (Hi,Thanks for your feedback, we have revised it.)
  • 19:40, 4 August 2021 37.201.5.84 talk posted a new comment on X735 V2.5 Software (2nd board works flawless - first one didn't start up the Pi with jumpers on board and died in a little cloud of smoke after a few hours. 2nd one first tested without Pi as described works great and stable. Added a little alias at the end of bashrc : sudo nano ~/.bashrc alias fan='sudo python /home/pi/x735-v2.5/read_fan_speed.py' reboot and now a simple "fan" displays the fan speed: pi@RaspberryPi:~ $ fan 0 RPM 1781 RPM 1782 RPM)
  • 16:59, 4 August 2021 68.48.183.201 talk posted a new comment on DACPi (It works with RoPieee just pick "Audio HAT: IQandIO Pi-DAC(+/PRO/Zero)" and I using Spotify and it playing real good sounds very good.)
  • 16:19, 4 August 2021 212.86.57.217 talk posted a new comment on X825 V2.0 (The dimensions are 107.5mm x 85mm...)
  • 16:16, 4 August 2021 212.86.57.217 talk posted a new comment on X825 V2.0 (There are wrong size information in "X825 V2.0 Dimensions".)
  • 04:40, 4 August 2021 173.54.16.17 talk posted a new comment on HDMI TO CSI-2 (Tests with: Sony NEX5 mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera component mmal: Failed to run camera app. Please check for firmware updates Sony NEX5N image output success but scrambled. Possible issue with camera only outputting 60hz? Video capture clips also success, also scrambled.)
  • 10:47, 2 August 2021 98.212.135.212 talk posted a new comment on HDMI TO CSI-2 (Sorry, that should have been anonymous #5.)
  • 10:47, 2 August 2021 98.212.135.212 talk posted a new comment on HDMI TO CSI-2 (Dear Anonymous #6 - I tried something similar, connecting the HDMI output from a Pi 2 to the HDMI2CSI board. It didn't work. It appears that the Pi 2 insisted on 60fcs. I don't know if the Pi 4 is smarter, or if there's a way to tell it to use 25fcs for that output.)
  • 15:05, 31 July 2021 Harry talk contribs posted a new comment on X-C1 Software (You don'e install 'make', 'gcc' tools. please check the above steps.)
  • 12:14, 30 July 2021 Lisa talk contribs posted a new comment on X728 (Hi，DC Barrel positive tip（the tip inside the DC port is positive.）)
  • 23:39, 29 July 2021 80.4.69.13 talk posted a new comment on X728 (Is the DC Barrel positive tip or negative tip?)
  • 16:11, 29 July 2021 Lisa talk contribs posted a new comment on X829 (Hi，This information has been updated, please refer to the current information)
  • 17:21, 28 July 2021 95.220.192.130 talk posted a new comment on X829 (But the product page mentions "Supports up to 4TB...", is that information incorrect/outdated?)
  • 15:44, 28 July 2021 Lisa talk contribs posted a new comment on X708-Software (Hello，sorry that we haven't tested x708 + OLED Displays；)
  • 12:51, 28 July 2021 14.45.239.176 talk posted a new comment on X708-Software (how to use SSD1306 OLED Displays (batter volt & capacity))
  • 10:45, 28 July 2021 Lisa talk contribs deleted comment #1734 on X708-Software
  • 10:44, 28 July 2021 Harry talk contribs posted a new comment on X708-Software (sorry, should be install.sh)
  • 10:29, 28 July 2021 Lisa talk contribs posted a new comment on NASPi (Hello，Hello，What system are you using. could you please send some pictures of the operation so that we can find out the problem.【support@geekworm.com】 ；And tell us your order number. Best regards)
  • 10:14, 28 July 2021 125.227.197.26 talk posted a new comment on X708-Software (Hello，What system are you using. Please email some pictures of the operation so that we can find out the problem.【support@geekworm.com】 ；And tell us your order number. Best regards)
  • 10:06, 28 July 2021 125.227.197.26 talk posted a new comment on X829 (Hello，There is no limit to the capacity, but please note that there are requirements for the thickness of the hard disk, please refer to the fourth picture above)
  • 08:01, 28 July 2021 114.151.81.253 talk posted a new comment on X728 (Thank you. I understand.)
  • 02:46, 28 July 2021 80.0.119.229 talk posted a new comment on NASPi (Script fails to install correctly, FAN does not run and subsequent boot error using DietPi)
  • 00:53, 28 July 2021 14.45.239.176 talk posted a new comment on X708-Software ("bash: x708.sh: No such file or directory" <---how to do???)
  • 20:13, 27 July 2021 95.220.192.130 talk posted a new comment on X829 (What's maximum disk capacity for X829? Is it limited by RPi OS or are those limits coming from hardware restrictions?)
  • 17:36, 27 July 2021 Lisa talk contribs posted a new comment on X728 (Hello，Because the x728 battery holder has a built-in protection circuit.)
  • 14:59, 27 July 2021 114.151.81.253 talk posted a new comment on X728 (I'm currently using an unprotected battery. Can you tell me why I shouldn't use a protected battery? I think it's safer.)
  • 14:31, 27 July 2021 114.151.81.253 talk posted a new comment on X728 (Thanks, I wanted this for my X728.)
  • 10:11, 27 July 2021 Lisa talk contribs posted a new comment on X728 (Hello，You can find it here： https://geekworm.com/)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"