Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 15:19, 5 January 2021 73.3.156.187 talk posted a new comment on X750 (In response to anon #16: From my limited testing, it appears you can infact do this by reading the value of channel 0x14 on address 0x36 and testing if it close to 65535 (max unsigned 16bit int), testing > 60000 should more than suffice, my values while AC is connected never exceed 1000. Refer to my previous comment for details)
  • 15:14, 5 January 2021 73.3.156.187 talk posted a new comment on X750 (Can confirm you do not need any batteries physically connected to the x750 if you have batteries attached via the BATT input. If you are wiring the batteries yourself (save yourself the extra $25) you need to wire them in parallel. Might be smart to use protected batteries if you're wiring yourself. I removed the battery slots on the x750 completely since space very limited and couldn't find the x708 anywhere and everything works flawlessly.)
  • 15:09, 5 January 2021 73.3.156.187 talk posted a new comment on X750 (I've been playing with random registers on the i2c-1 0x36 address and I have discovered that channel 0x14 seems to behave like a sort of power consumption meter, can anyone verify this? While pulling around 7amps with 4 batteries, this addition to the x750ups.py script works perfectly and seems very accurate! (ymmv depending on battery quantity/quality/health and amperage you are pulling, you may need to play with the values): def readStatus(bus): address = 0x36 read = bus.read_w...)
  • 13:44, 5 January 2021 42.110.204.210 talk posted a new comment on Rpi sense hat (huehue)
  • 09:55, 5 January 2021 Cindy talk contribs posted a new comment on X856 (Hi friend, Because there is EMC interference between the SSD and USB3, the X856 has been updated to X857 NOW.)
  • 09:55, 5 January 2021 Cindy talk contribs posted a new comment on X856 (Hi friend, Because there is EMC interference between the SSD and USB3, the X856 has been updated to X857 NOW.)
  • 17:22, 4 January 2021 77.13.183.183 talk posted a new comment on X856 (Why is not recommended Samsung brand mSATA?)
  • 19:30, 1 January 2021 80.130.146.104 talk posted a new comment on X728 (Hi there, the x728 works fine. The command "x728off" works wonderfully via the lxterminal, but I would like to use this command in a Python script so that I don't have to press the power button for 8 seconds after shutting down. Have already tried the subprocess module but without success. Does somebody has any idea? Thanks...)
  • 05:12, 1 January 2021 72.191.30.171 talk posted a new comment on 2.4 LCD (Are there any examples of how to program the buttons?)
  • 00:09, 31 December 2020 65.185.150.230 talk posted a new comment on HDMI TO CSI-2 (RPI 8g new install camera enabled)
  • 00:07, 31 December 2020 65.185.150.230 talk posted a new comment on HDMI TO CSI-2 (All setup according to above instructions. run above python code from picamera import PiCamera from time import sleep camera = PiCamera() camera.start_preview() sleep(1000) camera.stop_preview() Python 3.7.3 (/usr/bin/python3) >>> %Run TestHDMIinput.py mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM) mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/p...)
  • 20:56, 30 December 2020 188.122.5.86 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (This UI is not compatible with ALLO (mini) BOSS DAC by HW. In Volumio I was not able to turn the UI into operation due to (I guess) kernel/settings limitations. In Moode Audio I was able to have the UI working but then the DAC was not working. I was able to remove one conflict - Backlight PWM control on pin 18 is used by ALLO mini BOSS DAC to be enabled. I used 40pin cable and switched lines 17 and 18, then changed pin 17 to 18 for configuration control. Unfortunately, when both components ar...)
  • 15:34, 30 December 2020 Xiali talk contribs posted a new comment on T208 (Hi dear ,Please power according to the instructions,details please refer tou our T208-hardware By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 15:25, 30 December 2020 Xiali talk contribs posted a new comment on X825 (Hi dear ,As the Samsung SSD often has incompatibility issues,so we said it is serious,LOL,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 15:23, 30 December 2020 Xiali talk contribs posted a new comment on X728-hardware (Hi dear ,the DC jack is a port to power in,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 12:30, 30 December 2020 49.255.37.170 talk posted a new comment on T208 (Can I safely power the T208 using both barrel jack and XH2.54-2P connector at the same time? I want to provide 2 separate 5V inputs.)
  • 09:59, 30 December 2020 24.125.103.175 talk posted a new comment on X825 ("...we found the EMC of Samsung SSD is serious" Did you try tickling it or telling it a joke? Seriously, though... what does it mean the SSD is "Serious"? LOL)
  • 09:49, 30 December 2020 80.7.82.116 talk posted a new comment on X728-hardware (What is the DC jack? is the pin + or -?)
  • 07:41, 30 December 2020 97.113.84.252 talk posted a new comment on HDMI TO CSI-2 (Does this component send EDID to the connected device to negotiate comparable resolutions?)
  • 04:00, 30 December 2020 188.122.5.86 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Hi, I tested the UI on raspbian OS and it works nicely. Then I switched to Volumio and during installation there are errors related to DTC (the DTC itself was not installed by default): FATAL ERROR: Unrecognized check name "gpios_property". Same for clocks-property, unique_unit_address and avoid_unn.... . Any idea how to solve it? Regards!)
  • 15:39, 25 December 2020 Xiali talk contribs posted a new comment on 3.5 LCD B (Hi dear，1. Is this issue happen at the beginning, or does it appear after a period of normal use? 2. Raspberry Pi leads to 40 GPIO pins, while the screen leads to 26 pins.Please make sure the corresponding screen pins and Raspberry Pi pins is correct 3. Please download the latest version of the image (Raspbian/Ubuntu Mate/Kali or Retropie) from the Raspberry Pi official website and test again.)
  • 11:23, 25 December 2020 Xiali talk contribs posted a new comment on X825 (Hi dear ,thanks for your feedback ,we will check and modify.By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 07:20, 25 December 2020 70.160.115.60 talk posted a new comment on 3.5 LCD B (My screen is showing a rainbow color effect and is divided into sections where one is a visible desktop, but the rest are scrolling or in a constant state of moving or scrolling. Any helpful advice?) Tags: Mobile web edit, Mobile edit
  • 17:53, 24 December 2020 185.63.97.19 talk posted a new comment on X825 (Hello, the dimensions (45.75mm) in the drawing for the USB3 port is wrong.)
  • 14:57, 21 December 2020 Xiali talk contribs posted a new comment on T200 (Hi dear ,about the details of I2C purt ,please refer to our software raspberrypiwiki.com/T208-Software raspberrypiwiki.com/T200_software)
  • 14:48, 21 December 2020 Xiali talk contribs posted a new comment on T200 (Hi dear , the board has a power circuit by itself.Thansk for your effort,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:42, 21 December 2020 Xiali talk contribs posted a new comment on X857 (Hi dear ,thanks for your effort ,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:41, 21 December 2020 Xiali talk contribs posted a new comment on X350 (Hi dear ,thanks for your effort ,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:38, 21 December 2020 Xiali talk contribs posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (Hi dear ,could you please let us know which shopping platform you bought this product on？And please let us konw the details about your hardware and software,we will try our best to help you to fix this out)
  • 05:34, 21 December 2020 181.44.60.232 talk posted a new comment on T200 (Because the board has a power circuit by itself.)
  • 04:31, 21 December 2020 24.5.10.142 talk posted a new comment on X350 (Replying to my own question - tried a USB A to USB A conenctor. Worked perfectly fine. This is because I had the Raspberry Pi 4, which does not align the USB sockets.)
  • 00:37, 21 December 2020 46.142.167.216 talk posted a new comment on X857 (REboot still does not work. It's like old X850 v1.3. Any hints?)
  • 22:36, 20 December 2020 82.64.31.118 talk posted a new comment on X856 (Is there any issue with x856 on adding another 2.5'' hdd on the lastest available usb3 port ? Seems the added hdd does not have enougth power (but seems to work with x857). Thanks for reply) Tags: Mobile web edit, Mobile edit
  • 20:38, 20 December 2020 46.142.167.216 talk posted a new comment on X857 (I have got a X857 adapter. It has a ASM1153E controller w/ firmware version 140509_A1_82_40 Looks good.)
  • 06:11, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (for me UASP is supported. Use command "lshw -class disk -class storage" and watch for line "driver=uas")
  • 06:10, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (on my board is a ASMEDIA ASM1153E)
  • 06:00, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (The head of the provided screws is a little to big for mounting the SSD on the adapter.)
  • 05:58, 20 December 2020 46.142.160.220 talk posted a new comment on X857 (for me UASP is supported. use command "lshw -class disk -class storage" and watch for line "driver=uas")
  • 05:56, 20 December 2020 46.142.160.220 talk posted a new comment on Does the X825/X855 support USB boot (In the meantime USB boot is working and productive on RasPi4.)
  • 05:14, 20 December 2020 24.5.10.142 talk posted a new comment on X350 (Rather than using the supplied USB connector can we use a wired USB-to-USB connector?)
  • 16:38, 19 December 2020 109.252.70.46 talk posted a new comment on X725 (Cant use x725! After 24 h it starts to discharge batterys - but power is connected. Why? Is it a bug or function?)
  • 07:09, 19 December 2020 2.28.133.166 talk posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (it does not work)
  • 17:17, 15 December 2020 Xiali talk contribs posted a new comment on P173 (Hi dear ,the additional thermal tapes is gift(Backups) ,you can ignore them if you don't need them.By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 16:15, 11 December 2020 109.89.64.140 talk posted a new comment on P173 (I bought this package. This is not correct , I got 8 little thermal tapes instead of 3. But you must put only one in each location (4))
  • 15:38, 10 December 2020 Xiali talk contribs posted a new comment on X708-Software (Hi dear ,X708 will cut off the power after the system is shut down, you need to install the script first,By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 14:12, 10 December 2020 Xiali talk contribs posted a new comment on X728 (It should be caused by the HDMI input resolution higher than 1080p25fps (the resolution supported by the Raspberry Pi is 1080p25fps)，By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geekworm.com/community/forum)
  • 00:49, 10 December 2020 66.193.168.10 talk posted a new comment on X728 (Never mind, one of the TPS61088 Synchronous Boost Converters had a cold solder joint. I was able to flex the board and make the problem come and go. When I reflowed solder to and around the converter the problems went away. Unfortunately due to the quality of construction I will not be able to use it for my intended purpose. Bummer!)
  • 00:21, 10 December 2020 66.193.168.10 talk posted a new comment on X728 (Mine seems to be defective, it's outputting 13.4v and the 5v out led flashes regardless of the condition. it seems to charge ok. I was planning on using this in an embedded application with an rpi 4b but I now have concerns about reliability. Anything to try?)
  • 21:05, 9 December 2020 87.10.53.207 talk posted a new comment on X735 (Hi, I have raspberri pi 4 whit Ubuntu 20.04. Could you explain step by step the procedure you did for ubuntu mate 20.04 (also describe in your original language)? Will it also work on Ubuntu 20.04? Grazie Best Regards Nicola)
  • 18:07, 9 December 2020 103.214.222.222 talk posted a new comment on X708-Software (Hi. Is there a way to increase the delay between when "poweroff" of the RPI starts and the X708 drops power? This would allow to add a longer delay so that the OS is completely shutdown?)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"