Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 14:53, 1 July 2024 Lisa talk contribs posted a new comment on How to enable OLED display (Hi,[python problems]----Could you please specify what the problem is?)
  • 14:51, 1 July 2024 Lisa talk contribs posted a new comment on X1201 (Hi，Please note that Pi5 can only be powered by X1201. Could you please send some pictures of the installation by email [info@geekworm.com]? and tell us your order number, thank you.)
  • 14:39, 1 July 2024 Lisa talk contribs posted a new comment on X1005 (Hello，X1005 not support RAID.)
  • 22:29, 30 June 2024 89.187.180.33 talk posted a new comment on X1005 (Does the X1005 support RAID 0,1 ?)
  • 21:00, 28 June 2024 88.134.29.9 talk posted a new comment on How to enable OLED display (Can you please update your instructions. There are many python problems)
  • 13:58, 28 June 2024 47.151.250.57 talk posted a new comment on X1201 (Hi, I've got the x1201 attached to my Pi 5 and using the stock Pi 5 USB-C power supply (27W, 5V 5A). But yet when I first login the message "This power supply is not capable of supplying 5A..." is displayed in the notification area. Please advise. Thank you.)
  • 12:30, 27 June 2024 182.230.201.111 talk posted a new comment on X1002 (I used hailo-8 not hailo-8L)
  • 12:29, 27 June 2024 182.230.201.111 talk posted a new comment on X1002 (When I was using the hailo-8 chip and x1002, the board didn't turn on because of physical contact between the board and chip. I can see turn on properly when I'm not joining the bolt and just stick in it. If you're thinking of using the hailo-8, I'd better look into other boards. I used hailingo-8 not hailo-8L)
  • 11:18, 27 June 2024 Lisa talk contribs posted a new comment on X708-A1 (Hi,X1202 UPS not compatible with X708-A1 Battery Holder.)
  • 11:18, 27 June 2024 Lisa talk contribs posted a new comment on X1202 (Hi,X1202 UPS not compatible with X708-A1 Battery Holder.)
  • 09:28, 27 June 2024 175.116.49.141 talk posted a new comment on X1202 (Can this be used with the X708-A1 board?)
  • 08:58, 27 June 2024 175.116.49.141 talk posted a new comment on X708-A1 (Can this be used with the X1202 board?)
  • 10:21, 26 June 2024 Lisa talk contribs posted a new comment on X728 (Hello, X728-hardware V1.2/1.3 version : 5V OUT： LED green on flashing indicates 5V power out and UPS powered by battery; AC FAIL：LED red on indicates AC power loss or PSU failure or PSU disconnected; Please check whether the power supply is normal to the battery and the battery charging LED light status.)
  • 10:20, 26 June 2024 Lisa talk contribs deleted comment #4893 on X728
  • 10:11, 26 June 2024 Lisa talk contribs posted a new comment on X728 (Hello, X728 V1.2/1.3 version :X728-hardware 5V OUT： LED green on flashing indicates 5V power out and UPS powered by battery; AC FAIL：LED red on indicates AC power loss or PSU failure or PSU disconnected)
  • 04:16, 26 June 2024 89.176.154.85 talk posted a new comment on X728 (After power loss the batteries were fully discharged. After that power was restored and now LEDs 5V OUT and AC FAIL are blinking. What does it mean?)
  • 16:58, 25 June 2024 125.164.16.25 talk posted a new comment on X1002 (Hi again, I'd like to ask something about WLAN connection. When I use SD card to boot, it connects to WLAN just fine. But, when I attached X1002 in, with or without SSD, with or without P580, it doesn't want to connect to my WLAN. What's wrong here? Tested before and after applying electrical tape properly (Yes the question below is mine. All holes are intact, no shorts happened between the flex cable and the case))
  • 17:19, 24 June 2024 Lisa talk contribs posted a new comment on X1200 (Hi,Sorry, X1200 UPS does not support RTC wakeup.)
  • 14:49, 24 June 2024 Lisa talk contribs posted a new comment on X1202 (You can consider the X-UPS1 with 12V output)
  • 14:43, 24 June 2024 Lisa talk contribs posted a new comment on X708-A1 (Hi，X1203 compatible with X708-A1 battery holder. But it is not possible to install the X708-A1 under the X1203 because there are no mounting holes on the x1203 board.)
  • 14:38, 24 June 2024 Lisa talk contribs posted a new comment on X1202 (Hello,X1202 does not support X1009. X1009 requires DC12V power in, X1202 UPS only provides 5V output,)
  • 23:34, 23 June 2024 93.44.51.122 talk posted a new comment on X1200 (I'm using the RTC wakeup to schedule the power on my rpi5, along with POWER_OFF_ON_HALT=1 to save energy when powered off. According to the documentation the x1200 will cut off the power if the rpi5 is powered off. Is there a way to disable this feature and let the x1200 output power even if the rpi5 is shutdown? Or is there an alternative way to use the RTC wakeup when the rpi5 is connected to the X1200?)
  • 00:24, 23 June 2024 185.71.88.123 talk posted a new comment on N508 (I would suggest not moving the holes, but make this side part of the base and the opposite side part of the lid.)
  • 23:22, 22 June 2024 71.246.207.26 talk posted a new comment on LVDS2 (Has anyone used this or another product on a Tesla's round 4+2 pin LVDS connector at the screen or MCU? This board shows more pins.)
  • 20:38, 22 June 2024 185.71.88.123 talk posted a new comment on N508 (Another big problem of the case is that the antenna holes are not in the base, but on the lid. The antenna cords cannot be easily detached and they are short and fragile. It makes it difficult to disassemble the case and keep it with the detached lid. Would be nice to see the holes on the other side in the next version of the case.)
  • 12:46, 22 June 2024 216.122.42.75 talk posted a new comment on X708-A1 (Can this be used with the X1203 board? Can the X1203 recharge the batteries with the power output on the board?)
  • 07:16, 22 June 2024 185.211.32.105 talk posted a new comment on X1202 (Can this power 5, 3.5" drives on the x1009, through the board? can the x1009 power through the second barrel for the HD power? or would i use an ATX for the drives and leave the boards powered through the ups?)
  • 12:21, 21 June 2024 Lisa talk contribs posted a new comment on X825 V2.0 (X825 V1.5 has been discontinued. We have not tested it. Judging from the location of the USB 3.0 interface on Pi5 and Pi4, it may not be possible to install the USB 3.0 connector.)
  • 12:13, 21 June 2024 Lisa talk contribs posted a new comment on X1007 (Please contact us via email [info@geekworm.com]. Thank you.)
  • 12:03, 21 June 2024 Lisa talk contribs posted a new comment on X1011 (X1011 and X1203 are both installed on the bottom of pi5 and cannot be used together.You can consider using X728 ups or X-UPS1)
  • 11:25, 21 June 2024 Lisa talk contribs posted a new comment on X-UPS1 (Sorry, we've updated the description. The point we were trying to make was: when stacking more than 2 X-UPS1 boards, if you want to disable the 12V OUT, you have to short ALL the 12V OFF. If one of them is not shorted, the 12V OUT will occur.)
  • 06:54, 21 June 2024 104.34.104.69 talk posted a new comment on X-UPS1 (Your instruction is confusing, it says "MUST ALL 12 OFF jumper caps be shorted to disable 12V output when stacked multiple x-ups1 shields." Does it mean that X-UPS1 can only output 5v when multiple x-ups1 stacked?? Another words, Can X-UPS1 output 12v when 2 or more X-UPS1 stacked?)
  • 00:58, 21 June 2024 81.0.3.118 talk posted a new comment on X825 V2.0 (Hi, is the X825 v1.5 board compatible with RPi 5? If not, is it due to physical mount distances, electrical or software causes? Thank you.)
  • 00:39, 20 June 2024 193.56.104.165 talk posted a new comment on X1007 (My friend has a NASPI 2.5 case and I tried the x1007 on it. In width it must be widened by 1mm. The rear handle must have a LAN - USB port, mirrored. The rest fits perfectly.)
  • 22:35, 19 June 2024 176.100.1.193 talk posted a new comment on X1011 (Does it compatible with X1203 ( rpi5 - X1203 - x1011 ) ?)
  • 12:33, 19 June 2024 Lisa talk contribs posted a new comment on X1002 (Hi，you can do that. but please note that it may affect heat dissipation and wifi signal.)
  • 11:26, 18 June 2024 Harry talk contribs posted a new comment on X1011 (We tested X1011 and X1004. X1011 '''DOES NOT''' support hailo-8 ai accelerator, '''BUT''' X1004 can support. <br/><br/> Due to X1004 uses [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed. <br/><br/> In addition, it should be noted that when you...)
  • 11:09, 18 June 2024 Harry talk contribs deleted comment #4870 on X1011
  • 11:09, 18 June 2024 Harry talk contribs posted a new comment on X1011 (I tested X1011 and X1004. X1011 '''DOES NOT''' support hailo-8 ai accelerator, but X1004 does. Due to X1004 uses [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.)
  • 11:00, 18 June 2024 Harry talk contribs deleted comment #4866 on X1011
  • 10:20, 18 June 2024 Lisa talk contribs posted a new comment on X1007 (Hi,The NASPi 2.5 Case does not support X1007, and the interface locations are inconsistent.You can refer to the X1007 board's dimensional diagram to DIY your own 3D enclosure.)
  • 02:23, 18 June 2024 125.164.17.154 talk posted a new comment on X1002 (Hi I want to prevent short circuit by applying electrical tape. Is it okay to cover some vent holes on that particular side of P580 (power button/microSD side) so I can feel safe?) Tags: Mobile web edit, Mobile edit
  • 00:23, 18 June 2024 92.185.70.196 talk posted a new comment on X735-script (Hello, what is the x735 v2.5 script for libreelec, kodi 21 omega that works on raspberry pi 4. Can you help me. When giving the shutdown order, everything turns off completely.)
  • 18:00, 17 June 2024 Harry talk contribs posted a new comment on X1011 (Hello, I tested X1004, and X1004 supports hailo-8 ai accelerator, but I don't test X1011. <br/>X1011 and X1004 have similar schemes, so I think X1011 is also supported, I will test it soon)
  • 17:42, 16 June 2024 193.56.104.165 talk posted a new comment on NASPi Gemini 2.5 (I will receive a 3D model of the housing, I want to modify it to suit my needs.)
  • 17:37, 16 June 2024 193.56.104.165 talk posted a new comment on X1007 (If you don't have the housing for sale, share the 3D model (steep or cad) of NASPI 2.5, I will convert it for a 3D printer)
  • 21:07, 15 June 2024 177.74.220.86 talk posted a new comment on NASPi Lite (It should have been built to support wakeonlan) Tags: Mobile web edit, Mobile edit
  • 14:09, 14 June 2024 Lisa talk contribs posted a new comment on X1203 (Hi,The charging voltage and current cannot be modified.)
  • 11:47, 14 June 2024 Lisa talk contribs posted a new comment on X729 (Hi,X729 not compatible with Pi Zero 2W.)
  • 11:43, 14 June 2024 136.52.124.58 talk posted a new comment on X1203 (Is it possible to modify the maximum charge voltage? For safety and longevity of the cells I would like them charged no higher than 3.75v - Is it possible for the user to make this change? Is it also possible to modify the minimum voltage before automatic shutdown is triggered? Is it possible to modify the maximum charge current? Control over all of these settings would not only allow for safer operation and longer battery lifespan but would also allow for the use of LiFePO4 cells which ar...)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"