Difference between revisions of "X857 V2.0"

Latest revision as of 16:03, 6 August 2024

X857 V2.0

X857 V2.0 with Acrylic Plate and Embedded Heatsink

X857 V2.0 with Acrylic Plate

Overview

This is new updated X857 V2.0 version from X857 V1.2.

Some changes:

We removed the DC JACK power socket of X857 V2.0, X857 V2.0 is powered via USB 3.0 connector.
We use shorter copper spacer to connect Raspberry Pi 4 and X857 V2.0, which reduces the height of the entire product, so the matching metal case X857-C3 is shoter 3mm than X857-C1;
After our test, X857 V2.0 can connect to 2.4G wifi in seconds without the metal case. However, if X857 work with a metal case or external USB 3.0 devices such as a mouse or keyboard, you may still need to use Ethernet or 5G AP.
But if you use a metal shell like X857-C3, then you can only use 5.8G wifi AP, 2.4G wifi will not be available(be shielded by metal case);
As a Raspberry pi NAS device, we advised that you use ethernet network to replace wifi, this will be more stable and reliable.
X857 V1.2 version supports TRIM but not UASP, V2.0 version supports UASP but not TRIM.
We found that the stability of wifi is related to the brand of SSD.

Raspberry Pi 4 M.2 NVMe, M.2 SATA, mSATA Shield:

Product Name	Compatible with	Socket	Power Requirement	Matching Case	Extra Cooling Solution Recommended	Installation Video
X862 V2.0	Raspberry Pi 4	M.2 SATA Key-B NGFF SSD 2280	USB C 5Vdc +/-5% , ≥4A	~~X857-C3~~	X735/~~X708~~	Click to play
X863	Raspberry Pi 4	M.2 SATA Key-B NGFF SSD 2280	USB C 5Vdc +/-5% , ≥4A	X863-C1	X732	Click to play
X876	Raspberry Pi 4	M.2 NVMe Key-M 2280	USB C 5Vdc +/-5% , ≥4A	X863-C1	X732	Click to play
X873 V2.0	Raspberry Pi 4	M.2 NVMe Key-M 2280	USB C 5Vdc +/-5% , ≥4A	NO Matching Case yet	-	-
X872 V2.0	Raspberry Pi 4	M.2 NVMe Key-M 2280	USB C 5Vdc +/-5% , ≥4A	~~X857-C3~~	X735/~~X708~~	-
~~X857 V2.0~~	Raspberry Pi 4	mSATA SSD	USB C 5Vdc +/-5% , ≥4A	~~X857-C3~~	X735/~~X708~~	Click to play

Features

Ideal storage solution for Raspberry Pi 4 computer - mSATA SSD Shield
Supports up to 2TB mSATA solid-state drive (SSD)
UASP supported ONLY for X857 V2.0, do not support TRIM
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
LED blue indicator indicates drive status
USB bus-powered
PCB Size 85mm x 56mm
Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A)

How to Power X857 V2.0

How to power X857 V2.0 if you don't use X735

How to power X857 V2.0 when you use X735

How to select your power adapter

If you have a good quality usb type c power adapter, you can also use a TYPE C power adapter to supply power through X735 type c, otherwise we suggest you choose our power adapter with DC 5525 JACK

Packing List

1 x X857 V2.0 mSATA SSD shield
1 x USB3.1 jumper
6 x Screw M2.5 *6mm
4 x Spacer M/F M2.5 *7+6mm
4 x Spacer F/F M2.5 *9.5mm

Matching Metal Case

We use shorter copper spacer to connect Raspberry Pi 4 and X857 V2.0, which reduces the height of the entire product, so the matching metal case X857-C3 is shoter 3mm than X857-C1;

Please refer to X857-C3.

Note: The case of X857 V1.2 and X862 V2.0 are different. X857 V1.2 should use X857-C1 Case, but X857 V2.0 use X857-C3 Case.