Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View (newer 100 | ) (20 | 50 | 100 | 250 | 500)
  • 05:59, 17 May 2024 216.24.212.210 talk posted a new comment on X1201 (would NOT take a charge)
  • 05:58, 17 May 2024 216.24.212.246 talk posted a new comment on X1201 (Yes, the batteries were hardly used but one was bad; it would take a charge. Thanks)
  • 13:58, 16 May 2024 94.141.62.85 talk posted a new comment on NASPi 3.5 (Can a RPI 5 be used?)
  • 16:27, 15 May 2024 Lisa talk contribs posted a new comment on X1001 (Hi，Please check if the firmware is the latest version. Update the bootloader firmware to the latest version, refer to How to update eeprom firmware. Make sure your upgrade is successful by running command vcgencmd bootloader version)
  • 16:11, 15 May 2024 Lisa talk contribs posted a new comment on How to enable OLED display (Hi，could you please tell us more details? Please try to test the LED screen alone.Does the screen light up?)
  • 04:38, 15 May 2024 172.59.122.138 talk posted a new comment on How to enable OLED display (you say: Hi, you can ignore python-smbus package I ask: How Instructions do not work at all. Many failures.)
  • 03:16, 14 May 2024 75.25.130.237 talk posted a new comment on C790 (This is not plug-and-play. Such an app would be welcomed.)
  • 16:21, 13 May 2024 104.28.42.26 talk posted a new comment on XScript (I have the same problem...)
  • 12:47, 13 May 2024 112.220.71.122 talk posted a new comment on X1001 (My raspberry PI 5 server has - raspberry PI 5 4 GB - 25W power supply ( 5V 5A ) - Geekworm X1001 PICe HAT - SD Card 64GB - OS: Bookworm 64Bit My PI5 system halts within 3-4 hours from system boot. I tried to mount the SSD (1GB, Samsung Electronics) and booted from SSD successfully without SDCard. But with or without SSD, the system halts after 3~4 hours. When I disconnected X1001 HAT and the PI board( plug off the PICe ribbon cable from X1001 HAT), the system does not freeze for severa...)
  • 15:02, 12 May 2024 193.56.104.165 talk posted a new comment on X1007 (When will the housing be available)
  • 13:31, 12 May 2024 202.128.121.113 talk posted a new comment on PiKVM-A3 (Hi. Very interested in buying this. Is there a max resolution or is it purely limited by what the Pi can handle?)
  • 22:44, 11 May 2024 201.202.13.34 talk posted a new comment on Raspi UPS HAT Board (is there a way to connect i2c ports to a attiny85)
  • 18:01, 11 May 2024 Lisa talk contribs posted a new comment on X1002 (NEO 5 case not support X1002. You can use Argon NEO 5 NVMe (case with board).https://www.aliexpress.com/item/1005006903172746.html)
  • 17:58, 11 May 2024 Lisa talk contribs posted a new comment on X1003 (If it is a pre-update cable (yellow color), there may be a problem of not recognizing it. Please contact us by email [support@geekworm.com] and we will provide you with a new FPC cable.)
  • 17:40, 11 May 2024 Lisa talk contribs posted a new comment on X1007 (Hi,Yes,it's M3*8mm. we have updated the picture. Thanks)
  • 17:13, 11 May 2024 Lisa talk contribs posted a new comment on X1202 (Hi,Please remove X1202 from Pi5, wipe the pogo pin with alcohol,then reinstall it. please adjust the position of the pigo pin appropriately so that it contacts the Pi5 well.)
  • 05:43, 11 May 2024 85.60.35.153 talk posted a new comment on X1003 (I followed all the guides and there is no way to get it recognized by my rpi. Also the FPC is correctly connected. How is supposed that the FPC can be broken? and for me does not make sense to buy a new FPC)
  • 05:37, 11 May 2024 85.60.35.153 talk posted a new comment on X1002 (Can you use the x1002 with the neo case 5 for rpi5?)
  • 18:48, 10 May 2024 88.65.197.51 talk posted a new comment on X1007 (The packing list image is actually listing four M2.5x10mm scrws. But these are M3?)
  • 17:08, 10 May 2024 Abby talk contribs posted a new comment on X1004 (Hi, This is releated to Pi5. Pi5 is certified to support PCIE 2.0 only, not PCIE 3.0.)
  • 14:37, 10 May 2024 172.114.135.75 talk posted a new comment on X1202 (I noticed that the x1202 always said "AC Power OK" even with power plug disconnected. As the pld.py code ran I could press down on the Pi board and the x1202 would say "AC Power Loss". When I let up it would go back to "AC Power OK". Seems like a pogo is not making good contact. Any suggestions?)
  • 12:25, 10 May 2024 Lisa talk contribs posted a new comment on X1003 (Hi,Please refer here to test it X1003#FAQ and troubleshoot the problem. make sure the FPC cable is firmly and fully inserted into the PI 5, FPC cable direction is correct. Please be sure to upgrade to the latest version of firmware. If the problem is still not solved, please try to replace the FFC cable and test it.)
  • 11:35, 10 May 2024 Lisa talk contribs posted a new comment on How to Configure RAID Setting (Hi,You can observe the device operating status through the on-board HDD1 HDD2 LED indicators)
  • 00:02, 10 May 2024 85.60.35.153 talk posted a new comment on X1003 (I tried with integral m2 NVMe gen3 x4 2230 and it does not work, but I do not know why. When the x1003 has the m2 connected no led is turned on. Only after I connect the PSU it blink a led from the m2 (not the x1003). If I disconnect the m2 and connect the PSU I can see 2 blue leds of the board. Then what is happening here? no led from the board means no power? I can't get the m2 recognized in the rpi5. Is the board fault? is the ssd? I need help with this.)
  • 20:38, 9 May 2024 88.98.197.180 talk posted a new comment on P580 (Thanks. Found a thread on Reddit, a user managed to fit POE HAT with GPIO pins clipped.)
  • 15:59, 9 May 2024 95.73.54.49 talk posted a new comment on How to Configure RAID Setting (Hi, How can I check health of the each disk in hardware RAID mode?)
  • 15:18, 9 May 2024 Lisa talk contribs posted a new comment on X1201 (Hi,No need to setup a jumper and it automatically switches to being powered by the battery when power is removed. but please to make sure that your battery is not a low battery.)
  • 16:06, 8 May 2024 Lisa talk contribs posted a new comment on XScript (Hi，Please check if the [FAN FS] is shorted by Jumper Cap.)
  • 21:47, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (I also using raspberryOS 64bit(bookworm))
  • 21:45, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (Hi, I followed this guide and now xoff works, but the fan not move at all. It show active and enabled when I enter "sudo systemctl status x-c1-fan.service". Is it the fan broken or have any suggestion to debug?)
  • 14:41, 7 May 2024 Lisa talk contribs posted a new comment on P580 (Hi,Sorry,we have not tested POE HAT yet, you can refer to the size of P580--height: 35.8mm, pi5+X1002 height : 11.6mm;)
  • 11:15, 7 May 2024 Lisa talk contribs posted a new comment on X1202 (pogo pins is power to Pi 5)
  • 11:09, 7 May 2024 Lisa talk contribs posted a new comment on X1202 (Hi,①momentary switch port: XH2.54-2P; ②the functions of external switche and onboard switche are the same.)
  • 10:40, 7 May 2024 Lisa talk contribs posted a new comment on XScript (Hi,Sorry,we have not tested the Debian yet, you can refer to other users' feedback.XScript#comment-4426 or XScript#comment-4046)
  • 09:07, 7 May 2024 23.114.212.80 talk posted a new comment on X1202 (One of the pogos looks like it contacts the area for the Real-time battery. Does this also supply power for that port?)
  • 09:06, 7 May 2024 23.114.212.80 talk posted a new comment on X1202 (What are the specs on the momentary switch port? Does this work like one on the board?)
  • 07:50, 7 May 2024 84.50.46.206 talk posted a new comment on X735-script (I decided to run Home Assistant OS as a virtual machine using Incus so I could use the X735 following the instructions on this wiki page. Fan now is quiet and PWM is doing its thing. I followed the steps here, but I used ‎<code> pip3 install --break-system-packages rpi-lgpio ‎</code> for installinh the GPIO library. To check if the services are working I used ‎<code> systemctl status x735-fan ‎</code> and ‎<code> systemctl status x735-pwr ‎</code> For troubleshooting it helps to check...)
  • 04:41, 7 May 2024 88.98.197.180 talk posted a new comment on P580 (Can POE HAT fit in this case? Thanks.) Tags: Mobile web edit, Mobile edit
  • 02:17, 7 May 2024 1.64.154.121 talk posted a new comment on XScript (Hi, is there a version of Debian 12(Bookworm)? I'm using NASPi and the fan not working and "xoff: command not found" after install script.)
  • 18:38, 6 May 2024 Lisa talk contribs posted a new comment on X1002 (Hi,Please check the FFC cable or reconnect the FFC cable to test.)
  • 05:15, 6 May 2024 47.160.191.140 talk posted a new comment on X1002 (that case does not have sufficient space for any hat, or bases. You are going to need to use a different case.)
  • 05:13, 6 May 2024 47.160.191.140 talk posted a new comment on X1002 (X1002 suddenly stopped working after less than 2 weeks. journalctl shwos NVME controller went offline during write operations. What troubleshooing steps can I take to see what is going on?)
  • 04:17, 6 May 2024 216.24.212.37 talk posted a new comment on X1201 (X1201 V1.1 current behavior: On applying power starts charging and starts Pi5 via attached USB-C. When fully charged stops charging, quits using UBS-C power and uses power from the battery. When battery are depleted, shuts off everything. Also when you remove USB-C power, it does not transition to battery is shuts off everything. There is no software installed in crons or anything. This is not a seamless UPS. Is there a jumper of GPIO setting that I don't have set?)
  • 02:42, 6 May 2024 70.69.24.131 talk posted a new comment on X1002 (Have Pi 5 set upv5 Pro with Armor Lite & Heatsink case, caanot for the life of me figure out how to connect this peripheal to it.)
  • 13:05, 5 May 2024 223.233.83.87 talk posted a new comment on P580 (Right, that seems logical. I just hope there is enough clearance between my ssd and the Pi. I have ordered a box of m2.5 standoffs and some m2.5*4+6, lets see how it works out. I also figured that if you flip the Pimoroni base over, you can mount it as a hat with the right standoffs. Then you can use the Geekworm P579 case as well. That might be a better option to keep all the parts cool, as the NVMe won't be squeezed up close to the Pi5 board. Thanks for your help Lisa.)
  • 11:07, 5 May 2024 98.177.143.149 talk posted a new comment on X1003 (Micron 250GB 2242 MTFDKCD256TFK worked for me with the X1003 after updating eeprom.)
  • 18:17, 4 May 2024 84.170.25.179 talk posted a new comment on X1201 (Seems to be MAX17048 and does not support much more info (no shunt))
  • 18:13, 4 May 2024 84.170.25.179 talk posted a new comment on X1201 (What is the battery fuel gauge ic partnumber? Does it support more info than the current voltage?)
  • 05:28, 4 May 2024 77.10.106.69 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (The WD Green SN580 works like a charm with the latest rpi-eeprom-update. Used the rpi-clone fork from Jeff Geerling to copy a fresh Bookworm install onto the SSD. 740 MB/s write and 780 MB/s read for a 1GB file in 10 blocks of 100MB each. With PCIe3 enabled tho)
  • 22:55, 3 May 2024 80.74.161.124 talk posted a new comment on X1011 (Not so interesting without good case) Tags: Mobile web edit, Mobile edit
  • 18:46, 3 May 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hi,Sorry, it not support "wake ON lan")
  • 18:41, 3 May 2024 Lisa talk contribs deleted comment #4696 on Q200
  • 18:40, 3 May 2024 Lisa talk contribs deleted comment #4695 on XS-GaN-27W
  • 18:39, 3 May 2024 Lisa talk contribs deleted comment #4692 on NASPi Gemini 2.5
  • 18:39, 3 May 2024 Lisa talk contribs deleted comment #4694 on NASPi Gemini 2.5
  • 18:35, 3 May 2024 Lisa talk contribs posted a new comment on P580 (It is recommended to replace the pimoroni spacers with M2.5*6mm (included in the P580 packing list); and you need to prepare 4pcs M2.5*4+4 or M2.5*4+5 spacers to fix the bottom.)
  • 18:29, 3 May 2024 Lisa talk contribs posted a new comment on X1008 (Hi，sorry，there are no plans to produce an matching case yet, you can DIY a 3D case based on the size of the board.)
  • 18:23, 3 May 2024 Lisa talk contribs posted a new comment on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to X1011#Ports & Connectors)
  • 18:23, 3 May 2024 Lisa talk contribs deleted comment #4702 on X1011
  • 18:23, 3 May 2024 Lisa talk contribs posted a new comment on X1011 (Hi,5Vdc +/-5% ≥5A; DC power jack: 5.5x2.1mm, polarity: center positive (+); please refer to Ports & Connectors)
  • 05:21, 3 May 2024 93.104.122.139 talk posted a new comment on NASPi Gemini 2.5 (Is there possibility to use "wake ON lan" with it?)
  • 10:09, 2 May 2024 69.174.137.7 talk posted a new comment on X857 V2.0 (blue led light indicates?)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on M901 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on FFC Cable (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:11, 2 May 2024 75.37.71.93 talk posted a new comment on Q100 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on Q200 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on XS-GaN-27W (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 07:10, 2 May 2024 75.37.71.93 talk posted a new comment on NASPi Gemini 2.5 (I am once again asking how to get in contact WITH ANY SUPPORT PERSON WHATSOEVER IN REGARDS TO A FAULTY X882-A1 CONNECTOR. POTENTIAL BUYERS be aware this is what they are putting their customers through. I have tried other means of communication only to be ignored.)
  • 12:44, 1 May 2024 223.233.81.42 talk posted a new comment on P580 (I see, thanks. The pimoroni hat has its ssd in between the hat and pi5, and their clearance is 7mm. There still might be a way to make it fit, but I am not sure I have the exact mounting hardware. Thanks Harry.)
  • 05:53, 1 May 2024 75.37.71.93 talk posted a new comment on NASPi Gemini 2.5 (What does it take to get a reply from Cindy, the (terrible) customer support person I got in regards to a garbage X882-A1 connector that came with this kit.)
  • 17:11, 30 April 2024 Harry talk contribs posted a new comment on X1200 (https://geekworm.com/products/x1200 to buy it.)
  • 16:57, 30 April 2024 193.191.241.17 talk posted a new comment on X1008 (Is there a compatible case for this ?)
  • 16:51, 30 April 2024 193.191.241.17 talk posted a new comment on X1011 (Which model of DC power is compatible ?)
  • 15:19, 30 April 2024 Harry talk contribs posted a new comment on P580 (Hello Refer to the P580 case size chart below to check whether your PCIe board supports P580: 800px)
  • 14:28, 30 April 2024 Lisa talk contribs posted a new comment on X1001 (Yes, you can use a 2pin cable to power X1001(SSD) via Pi 5 GPIO)
  • 07:17, 30 April 2024 82.58.137.153 talk posted a new comment on XScript (Hi, I followed this guide and now xoff works like a charm, many thanks. On the other hand, even if I am able to run and control my fan, even at low speeds it's very loud. I tried changing some values in the x-c1-fan.sh script and the fan responded but it never got "silent" like it used to be. I remember it being very silent, especially at low speeds. What can i do? is there something i missed to try? I'm kinda a newbie when it comes to hardware, and the Naspi was not touched since i built i...)
  • 14:00, 28 April 2024 24.128.44.197 talk posted a new comment on X1001 (The XH2.54 5V power connector connects to the GPIO on the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 22:34, 27 April 2024 180.150.80.69 talk posted a new comment on Auto Mount an NTFS USB Drive on Raspberry Pi (Cheers for creating this excellent, straight-forward article. I wish I had permission to register but apparently I don't, so I'm posting this anon. Thanks!)
  • 20:35, 27 April 2024 223.233.80.167 talk posted a new comment on P580 (Will this case work with the Pimoroni NVMe hat as well? I do not have the X1002 hat as it is hard to get in India. So, I got the Pimoroni bottom hat and now I'm looking for a case that'll fit.)
  • 23:43, 26 April 2024 185.195.233.147 talk posted a new comment on How to update eeprom firmware (Changed the line in /etc/fstab to rw instead of ro. It might also be possible to completely remove ro/rw and leave blank. sudo nano /etc/fstab)
  • 12:40, 26 April 2024 74.111.99.142 talk posted a new comment on X450 (Can the 3.5mm headphones jack be used as output as well?) Tags: Mobile web edit, Mobile edit
  • 09:03, 26 April 2024 70.134.61.105 talk posted a new comment on P252 (All four screws are the same length, though they should not be as the ones toward the middle of the case stand proud.)
  • 02:21, 26 April 2024 88.196.227.54 talk posted a new comment on X735-script (Any way to configure PWM in Home Assistant OS since it does not have apt, wget, etc?)
  • 09:58, 25 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello,There is no 2pin cable in the packaging list because the XH2.54 5V IN port for powering the SSD when the power supply is insufficient.Generally, the SSD power supply demand can be met by the FFC cable.hope to get your understanding.)
  • 02:55, 25 April 2024 73.22.53.193 talk posted a new comment on X1011 (I would like to create a NAS, Raid 5 out of this, are you planing to release instructions to do so?)
  • 17:14, 24 April 2024 185.65.135.178 talk posted a new comment on How to update eeprom firmware (I did the as the instruction says, but getting error. sudo apt update sudo apt upgrade sudo rpi-eeprom-update -a Not sure how to get around this problem: /usr/bin/rpi-eeprom-digest: 92: cannot create /boot/firmware/pieeprom.sig: Read-only file system I am running the latest Raspberry Pi OS 64-bit, a X1001 with a 1TB 2280 SSD and mSD is not inserted so the Pi5 starts and runs from the SSD. Have also been trying to set the eeprom for low power consumption when in stand by mode: sudo rpi-eep...)
  • 16:57, 24 April 2024 185.65.135.178 talk posted a new comment on X1001 (Integrated with XH2.54 5V power connector. It is, but what is not supplied or offered is a short cable to connect to the Pi5 board. And yes, my Pi5 is working great with the X1001 and a 1TB 2280 SDD. The dtparam=pciex1_gen=3 has been set and the microSD has been removed. So I don't really need the extra power connector, but it should have been included anyways just to be on the safe side.)
  • 04:08, 24 April 2024 77.189.215.199 talk posted a new comment on X1002 (Crucial P3 Plus 500 GB works after update to eeprom firmware 2024 - 04 - 20)
  • 11:48, 23 April 2024 Lisa talk contribs posted a new comment on P511 (Hi,the screw size: M2.5 x 9.5; Note: the screw of P511-A's Fan :M2 x 10)
  • 11:40, 23 April 2024 Lisa talk contribs posted a new comment on XScript (Hi，Yes, if you do not install the script, press 7-8 seconds to force shutdown.)
  • 10:55, 23 April 2024 Lisa talk contribs posted a new comment on X-UPS1 (Hello,you can use the output of one of the UPS boards)
  • 10:46, 23 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello，It doesn't support disable the LED light, you can cover it with something)
  • 04:54, 23 April 2024 47.181.223.243 talk posted a new comment on X650 (Resolved. Board v.1.5 is still using pcf8563 not ds1307 so no change in config.txt is necessary.)
  • 02:47, 23 April 2024 136.23.0.128 talk posted a new comment on X1011 (I would also like a case produced. Thanks) Tags: Mobile web edit, Mobile edit
  • 15:48, 22 April 2024 90.77.46.17 talk posted a new comment on XScript (If I do not install the script, I can still switch on and switch off my Pi4 with the X-C1 board. Is that save or is it like a hard shut off which might corrupt my SD card?)
  • 05:33, 22 April 2024 108.76.201.4 talk posted a new comment on X1001 (I posted as anon user #15 earlier. I think I got the problem resolved by routing the cable a little differently. I noticed I did not have the problem if the device was outside of the case (Geekworm P579-V2-K). I tried adding some electrical tape to the inside of the case (per Q4), but that didn't make a difference. However, I noticed that, when the pi was installed in the case, the FCC cable was being pressed against the inside of case, which caused it to bend some and appeared to cause...)
  • 04:04, 22 April 2024 177.99.103.158 talk posted a new comment on X1001 (Is there a way to disable the LED light, its so annoying.)
  • 01:14, 22 April 2024 108.76.201.4 talk posted a new comment on X1001 (I've installed the X1001 with a 128GB Silicon Power P24A60 (Model A60), and it has booted and ran fine for at least an hour or so, then everything just stops responding and basic commands like sudo and ls are no longer found. It behaves as though the drive has being disconnected, but the blue light is still on when this happens. I have re-seated the FCC cable on both ends a few times. It seems to be seated fully and securely. Also, the drive is typically recognized (at least momentarily)...)
  • 09:39, 21 April 2024 212.102.44.164 talk posted a new comment on X-UPS1 (When multiple boards are stacked can I use the outputs on all boards, or only the first? Thanks!)
  • 05:22, 20 April 2024 47.181.223.243 talk posted a new comment on X650 (additional error: "dmesg | grep rtc [ 8.242339] rtc-ds1307: probe of 1-0068 failed with error -5")
(newest | oldest) View (newer 100 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"