Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 00:53, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (after a quick check(don't wanna disassemble it), the total height with rpi installed is 25.54mm(w/ 0.02mm precision) approximately, the lower plate is 8mm, so i guess the upper plate is 17.54mm)
  • 15:51, 17 February 2024 45.46.196.207 talk posted a new comment on X729 (any problems with using it on a raspberry pi 5?)
  • 08:20, 17 February 2024 50.52.101.217 talk posted a new comment on X1003 (Using a solidigm P41 plus 2230 1TB drive. Typing this comment with it as the boot drive on my Raspberry Pi 5. Followed directions on the wiki here. Had to reboot twice before it worked. Very fast.)
  • 01:16, 16 February 2024 98.195.211.0 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I used a hot air station to unsolder and solder it into place)
  • 11:27, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (Got my X1003 working with my rpi5 using a "with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD", and cloned the boot microSD to it using my Gerling's rpi-clone script. The RPI5 doesn't want to boot from the NVMe even tho the 6 was added to the boot order line in the eeprom and the PCIE_PROBE=1 is in ther.)
  • 10:14, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (UPDATE!! RETURNED the KINGSPEC nvme. It was making it so that the X1003 had NO LIGHTS illuminated. Replaced it with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD from amazon [WORKS even tho it has Phison E19 controller]. It arrived today, i put it in the X1003 and i had lights. I added the 6 to the end of the boot order in the eeprom. Device showed up. I ran the rpi-clone script (geerling's from his git). It went through all the glorious cloning motions. Now i'm just working on getting the rpi...)
  • 04:33, 15 February 2024 74.203.198.222 talk posted a new comment on X1003 (CL1-3D128-Q11 NVMe SSSTC 128GB is working great, although it is small. Never seen a pi run so fast.)
  • 02:58, 15 February 2024 188.77.122.153 talk posted a new comment on X1003 (Yo he probado con un KingSpec M.2 NVMe 512 GB 2242 y reconoce la unidad, las luces permanecen encendidas, copia la SD al SSD sin problemas, pero luego no arranca desde el PCIe. ¿alguna solución?)
  • 03:18, 14 February 2024 77.136.66.21 talk posted a new comment on X1003 (Works well with SSD SK Hynix BC711 512go 2242) Tags: Mobile web edit, Mobile edit
  • 19:56, 13 February 2024 207.173.135.189 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 ([SOLVED] Errors booting from NVME with X1002 base and Crucial T500 Gen4 NVMe. Symptoms: Either: 1. *Extremely long* boot times (~240 seconds) with pcieport and nvme errors in dmesg including: [ 4.230345] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 4.230359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 4.230362] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 [ 4.230366...)
  • 13:48, 12 February 2024 175.143.167.98 talk posted a new comment on X630 (Does the X630-A2 audio board work with PiKVM V2 DIY (using X630 and X630-C1 case)? Is any additional configuration required like on PiKVM-A3 or should this just work with pikvm without additional configuration?)
  • 13:30, 12 February 2024 45.46.196.207 talk posted a new comment on X729-Software (Is there any information and demo script on the current/voltage/power monitor data from address 40?)
  • 10:05, 12 February 2024 76.158.60.16 talk posted a new comment on M400 (Don't purchase this product. Run This documentation is useless. They don't even show a picture of how to connect the ribbon cable.)
  • 23:36, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Found it in the FAQ in the main page: A: The X1000 does not reserve the nut column to fix the 2230/2242/2260 SSD. Based on our test, you can secure the 2230/2242/2260 SSD using an M2*6mm screw and 2pcs M2 nuts. Place one M2 nut under the SSD, then use the M2*6mm screw and the other M2 nut to fasten the SSD.)
  • 23:09, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Also need standoff for 2242 size ssd. It appears that the 2280 standoff is permanently mounted to the X1001.)
  • 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on X-C1 Software (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
  • 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
  • 13:31, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Work with debian?)
  • 03:51, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (I mean 2230 or 2242)
  • 03:50, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (How to fix a 2240 nvme ssh.. there is a hole but no fix for the screw)
  • 21:31, 10 February 2024 185.228.19.78 talk posted a new comment on X1002 (Would this support the Coral M.2 Accelerator B+M key, aka Edge TPU?) Tags: Mobile web edit, Mobile edit
  • 21:20, 10 February 2024 185.228.19.78 talk posted a new comment on PiKVM-A3 (Any plans to update the KVM-A3 case for Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 21:10, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (More specifically, an updated P165-B for rpi5?) Tags: Mobile web edit, Mobile edit
  • 21:07, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (Any plans to release a version of this for the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 21:05, 10 February 2024 185.228.19.78 talk posted a new comment on P122 (What is the height of the top heatsink piece? And bottom heatsink piece? I assume I could use either/or?) Tags: Mobile web edit, Mobile edit
  • 20:25, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (Same here, I get about 60MB/sec. Not what I would expect from PCIe. In my old case with USB bridge I get more than 110 MB/sec with the same drive.) Tags: Mobile web edit, Mobile edit
  • 20:24, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (It works, but performance is awful. I have double the speed on my RPi4 in Argon40 NVME case and that is only using USB bridge and not PCIe. I'm deeply disappointed by the X1001...) Tags: Mobile web edit, Mobile edit
  • 14:00, 10 February 2024 50.37.95.233 talk posted a new comment on X1001 Hardware (Can you please post the correct mounting screw size for 2242 ssd?) Tags: Mobile web edit, Mobile edit
  • 12:45, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (Which Phison controller is the problem? E21 or E13? Or BOTH??)
  • 12:33, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (does NOT work with KINGSPEC NX 2230 512GB -- this PCIe m-keyed m.2 nvme makes the lights on the X1003 go out.)
  • 06:37, 10 February 2024 47.152.127.211 talk posted a new comment on X-UPS1 (Can you post example usage of the PH2.0 signal cable connector and the external momentary switch connector.)
  • 05:41, 10 February 2024 108.193.152.114 talk posted a new comment on X1001 (I'm able to crimp my own JST-to-DuPont cables. Could I just power the X1001 via the GPIO pins with such a cable?)
  • 00:44, 10 February 2024 188.250.82.104 talk posted a new comment on X882 (Hello, how can I use the power button on the board? Do I have to connect the power to the board? Because it is currently being powered by the Pi4) Tags: Mobile web edit, Mobile edit
  • 23:13, 9 February 2024 82.220.82.107 talk posted a new comment on X1002 (Same here: those 4 standoffs have been implemented as M2. That will no longer fit the screws and / or the 4 5mm feet. In my delivery it says X1002 V1.1 - maybe te problem is in all deliveries with V1.1 ??)
  • 07:05, 9 February 2024 98.168.105.253 talk posted a new comment on X708-A1 (Is there a drawing or 3d model for this board? I need to 3d print a custom case for it. Thanks!!)
  • 05:24, 9 February 2024 96.88.172.9 talk posted a new comment on X630 (How long will this product be in production/be supported?)
  • 10:52, 8 February 2024 108.238.59.28 talk posted a new comment on H508 (Can I purchase the H508 copper pad? Just need the copper pad.)
  • 10:37, 8 February 2024 98.60.21.52 talk posted a new comment on X1002 (Just received my unit and the M2.5x10mm screws do not fit in the X1002--it seems like the integrated standoffs were tapped incorrectly. The screws fit fine in the M2.5x5mm gold standoffs. Anybody else have this issue--am I crazy? I've done many M2.5 projects.)
  • 13:46, 7 February 2024 38.45.128.198 talk posted a new comment on X1003 (Lexar SSD Play 1TB showed up, successfully configured as the only disk and booted from it. Using test script from "Benchmark ssd on linux: How to measure the same things as crystaldiskmark does in windows" on Unix StackExchange. Results: Sequential Q32T1 Read: 407MB/s [ 12 IOPS] Sequential Q32T1 Write: 407MB/s [ 12 IOPS] 4KB Q8T8 Read: 397MB/s [ 99319 IOPS] 4KB Q8T8 Write: 394MB/s [ 98554 IOPS] 4KB Q32T1 Read: 392MB/s [ 98225 IOPS] 4KB Q32T1 Write: 367MB/s [ 91838 IOPS] 4KB...)
  • 08:32, 6 February 2024 47.220.145.84 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (How do you change the nut from the 2242 position to the 2230 position?)
  • 05:24, 6 February 2024 93.226.210.72 talk posted a new comment on X1003 (Transcend MTE400S 1 TB NVMe PCIe Gen3 x4 M.2 2242 (TS1TMTE400S) seems not to be compatible. First installation tests succsessfully. Image copy worked, but lot of error messages while booting. Raspi freezes after boot. Booting with an usb nvme-adapter was successfull. No errors.)
  • 02:59, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (oha ... flushed a new eeprom and VOILA now it works :-))
  • 02:31, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (hi from vienna, i have no luck till now withj the x1002: * first i had a WD black 770 and read that this is on the incompatible list * returned it and ordered a crucial t500 1TB nvme ssd but still there is NO reaction (no blue light, nothing reported in lspci,..) looks like the x1002 is not found / connected / or ist just plain dead * did the edits as described above in boot/config.txt * no success any advice please cheerz)
  • 19:23, 5 February 2024 45.89.242.200 talk posted a new comment on X1004 (Will the Coral M2 card run on this current firmware?) Tags: Mobile web edit, Mobile edit
  • 11:40, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive PCIE 2 Category Test Result HDParm Disk Read 419.51 MB/sec HDParm Cached Disk Read 412.94 MB/sec DD Disk Write 284 MB/s FIO 4k random read 106113 IOPS (424455 KB/s) FIO...)
  • 08:17, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive also works)
  • 04:38, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (However I do not see #36 light up. What did I miss ? -> If #36 is missed, check if all jumper pins align. -> Unscrew the screws and re-align the Pi. -> Push down on the Pi so you can feel the pogo pins bounce. -> While holding down the Pi, tighten the screws.)
  • 03:29, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (I enabled i2c and rebooted the machine. Battery is charging. $ sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
  • 01:42, 5 February 2024 108.238.59.28 talk posted a new comment on H508 (Yes. I want just the H508 copper pad.) Tags: Mobile web edit, Mobile edit
  • 18:56, 4 February 2024 94.209.37.161 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (While following the instructions I noticed the following messages in dmesg: pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 pcieport 0000:00:00.0: [12] Timeout I am running the latest eeprom CURRENT: Fri 5 Jan 15:57:40 UTC 2024 (1704470260) LATEST: Fri 5 Jan 15:57:40 UTC 2024 (17044702...)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"