H500
Overview
This is the Raspberry Pi Official Active Cooler for Raspberry Pi 5.
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
WARNINGS • This product should only be used with Raspberry Pi 5. • This product should only be operated in a well ventilated environment, and if used with a case, the case should not be covered. • Make sure the metal heatsink does not touch any electronic components on Raspberry Pi 5 or any accessories, to avoid the risk of unwanted electrical contact and shorting. • Ensure the thermal pads are present and undamaged before use. If the pads are missing or damaged, you will need to replace them before using the Active Cooler. • Take care when using the Active Cooler, as the metal parts of the product may become hot during operation. • Avoid removing the Active Cooler once it is fitted to Raspberry Pi 5, as this product is not designed for repeated removal and replacement.
Geekworm Cooler Series:
| Picture | Model | Compatible With | Material | Thickness(mm) | Support Fan |
|---|---|---|---|---|---|
 |
Pi 5 official Active Cooler | Raspberry Pi 5 | Aluminum Alloy | 10mm | √ with 4-pin 3010 blower fan |
 |
H505 | Raspberry Pi 5 | Aluminum Alloy | 11.6mm | √ with 4-pin 3007 blower fan |
 |
H509 | Raspberry Pi 5 | Aluminum Alloy | 15mm | × don't support fan installation |
 |
Argon THRML 30-AC | Raspberry Pi 5 | Aluminum Alloy | 9.6mm | √ with 4-pin 3007 blower fan |
 |
H501 | Raspberry Pi 5 | Aluminum Alloy | 9.5mm | √ with 4-pin 3007 blower fan |
 |
H502 | Raspberry Pi 5 | Copper | 4mm | × support 30x30 fan installation |
 |
P165-B | Raspberry Pi 4 | Aluminum Alloy | 11mm | × support 30x30 fan installation |
 |
P165-A | Raspberry Pi 4 | Aluminum Alloy | 7mm | × support 25x25 fan installation |
 |
H402 | Raspberry Pi 4 | Copper | 4mm | × don't support fan installation |
 |
C235 | Raspberry Pi Computer Module 4 (CM4) | Aluminum Alloy | 12mm | × support 30x30 fan installation |
 |
C296 | Raspberry Pi Zero 2 W | Aluminum Alloy | 10mm | × don't support fan installation |
Features
- Single-piece anodised aluminium heatsink
- Heatsink-mounted, temperature-controlled blower fan attached by three screws
- Spring-loaded push pins for mounting onto Raspberry Pi 5
- Pre-applied thermal pads for heat transfer
Specifications
- Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
- Fan speed control: Pulse width modulation control with tachometer
- Maximum airflow: 1.09 CFM
- Maximum fan speed: 8000 RPM +/- 15%
- Product material: Anodised aluminium
- Pinout: The fan connector is a 1mm pitch JST SH socket and has four pins:
| Pin | Function |
|---|---|
| 1 | +5V |
| 2 | PWM |
| 3 | GND |
| 4 | Tach |
Compatibility
Compatible with P394, P395 etc.
Enable comment auto-refresher