H402

H402

H402 Dimensions

H402 Packing List

H402 Packing List

Overview

This is an ultra-thin one-piece copper heatsink specially designed for Raspberry Pi 4 Model B. CNC-processed copper heatsink with precise cutouts, designed to seamlessly fit the Raspberry Pi 4B motherboard.

Note: Please tear off the protective films on the surface of acrylic plate before use.

---

Geekworm Cooler Series:

Picture	Model	Compatible With	Material	Thickness(mm)	Support Fan
	Pi 5 official Active Cooler	Raspberry Pi 5	Aluminum Alloy	10mm	√ with 4-pin 3010 blower fan
	H505	Raspberry Pi 5	Aluminum Alloy	11.6mm	√ with 4-pin 3007 blower fan
	H509	Raspberry Pi 5	Aluminum Alloy	15mm	× don't support fan installation
	Argon THRML 30-AC	Raspberry Pi 5	Aluminum Alloy	9.6mm	√ with 4-pin 3007 blower fan
	H501	Raspberry Pi 5	Aluminum Alloy	9.5mm	√ with 4-pin 3007 blower fan
	H502	Raspberry Pi 5	Copper	4mm	× support 30x30 fan installation
	P165-B	Raspberry Pi 4	Aluminum Alloy	11mm	× support 30x30 fan installation
	P165-A	Raspberry Pi 4	Aluminum Alloy	7mm	× support 25x25 fan installation
	H402	Raspberry Pi 4	Copper	4mm	× don't support fan installation
	C235	Raspberry Pi Computer Module 4 (CM4)	Aluminum Alloy	12mm	× support 30x30 fan installation
	C296	Raspberry Pi Zero 2 W	Aluminum Alloy	10mm	× don't support fan installation

Features

• Model: H402
• Material: copper
• heartsink Thickness: 4mm / 0.16inch
• Heatsink Net Weight: 59g / 0.13lb
• Comes with thermal pads for both CPU,RAM,USB chip and network module of Raspberry Pi 4
• Includes an acrylic plate for installing under the Raspberry Pi 4 to provide protection

Packing List

• 1x 4mm thickness copper heatsink
• 1x Acrylic Plate
• 1x Screws Pack accessories

User Manual

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

6 months ago

Score 0

1) It would be helpful to have the numbers on the thermal pads in step 3 copied over to the Packing List image. (I believe it should be 3, 2, 1, 4, 5 from left to right in the Packing list image.)

2) Add a note to remove the clear plastic film from both sides of the thermal pads or they're not going to work.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

6 months ago

Score 0

Hi,thanks for your suggestions, we have updated them.

Permalink