-
Main public logs
Jump to navigation
Jump to search
Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 17:24, 24 August 2024 85.230.200.138 talk performed unknown action "comments/add" on GEEKWORM NAS Family (What's the difference between the M901 and the X10xx-series?)
- 11:45, 24 August 2024 174.179.146.74 talk performed unknown action "comments/add" on KVM-A3 (Still no rpi5 version? What's the delay?)
- 22:58, 23 August 2024 188.27.32.164 talk performed unknown action "comments/add" on X1001 (Hello, I have purchased two of the X1001s, one for a 4GB Pi5 and one for an 8GB Pi5. After editing the config.txt file on both Pis, both X1001s work OK on the 4GB Pi5, but none of the X1001s work on the 8GB Pi5. Tried both powering the addon boards through the extra power connector, both with and without an SSD that otherwise has been tested to work OK. Tried all combinations of SSD, X1001, pcie cable, extra-power cord; in all combinations the 4GB Pi5 works, the 8GB Pi5 does not work. Even th...)
- 21:42, 23 August 2024 84.157.71.126 talk performed unknown action "comments/add" on X-C1 Software (For anyone for whom the install.sh breaks the boot sequence with an infinite loop of error messages (complaining that the file or directory wasn't found for /sys/class/gpio/gpio17/ or something): 1. Go to the install.sh file 2. Replace the first echo block with: ``` echo '#!/bin/bash SHUTDOWN=4 REBOOTPULSEMINIMUM=200 REBOOTPULSEMAXIMUM=600 #echo "$SHUTDOWN" > /sys/class/gpio/export #echo "in" > /sys/class/gpio/gpio$SHUTDOWN/direction BOOT=17 #echo "$BOOT" > /sys/class/gpio/export #echo...)
- 17:15, 23 August 2024 94.138.76.69 talk performed unknown action "comments/add" on X301 (If you FAT32 format an SD card and put the bootcode.bin file from PiOS on it, you are able to boot from the X301 attached hdd/ssd. There is also an anclosure available to 3D print on the Printables website.)
- 16:27, 23 August 2024 94.138.76.69 talk performed unknown action "comments/add" on X301 (The Pi Zero 2 W DOES support boot from USB out of the box. I have tried both a USB thumbdrive and an SSD through a USB SATA adapter on an OTG-to -USB cable. All work fine. But for some reason the X301, which is essentially an OTG adapter, does not allow booting from the HDD/SSD attached. Big disappointment.)
- 11:51, 23 August 2024 172.103.144.22 talk performed unknown action "comments/add" on NASPi 3.5 (While using RAID1 if one of the drives were to fail, how could I know?)
- 09:41, 23 August 2024 Abby talk contribs created page File:IMG-8610.jpg
- 09:41, 23 August 2024 Abby talk contribs uploaded File:IMG-8610.jpg
- 09:41, 23 August 2024 Abby talk contribs created page File:IMG-8614.jpg
- 09:41, 23 August 2024 Abby talk contribs uploaded File:IMG-8614.jpg
- 09:39, 23 August 2024 Abby talk contribs created page File:IMG-8608.jpg
- 09:39, 23 August 2024 Abby talk contribs uploaded File:IMG-8608.jpg
- 09:35, 23 August 2024 Abby talk contribs deleted page File:IMG 3035-acce.jpg
- 09:34, 23 August 2024 Abby talk contribs created page File:X630-C1-IMG-5843-acce.jpg
- 09:34, 23 August 2024 Abby talk contribs uploaded File:X630-C1-IMG-5843-acce.jpg
- 23:57, 22 August 2024 192.77.184.26 talk performed unknown action "comments/add" on X1012 (What does the "EN" solder pad on the group "3V3, EN, GND, 5V" on the underside of the X1012 do? Is that an Enable pin, enabling a remote on/off switch? If the EN pin is connected to GND, in the same group, will that have the same function as pressing the reset button on the RPi 5?)
- 19:55, 22 August 2024 163.116.157.24 talk performed unknown action "comments/add" on X708-A1 (What is the output voltage through the PH 2.0?)
- 18:39, 22 August 2024 84.179.227.232 talk performed unknown action "comments/add" on X1008 (Is there an option to power this (Rpi, board and 3.5 HDD) via PoE to get rid of an additional power supply?)
- 17:37, 22 August 2024 Abby talk contribs uploaded a new version of File:X1004-v1.1-MG-6870-Packing-List.jpg
- 17:19, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Key Features：Power Management：Automatic safe shutdown when battery voltage is low (programmable); please refer to: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1202 Software] 4.2 Change the battery low voltage to implement safe shutdown. default is less than 3.20Vdc.)
- 17:19, 22 August 2024 Lisa talk contribs performed unknown action "comments/delete" on X1202
- 17:18, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Key Features：Power Management：Automatic safe shutdown when battery voltage is low (programmable); please refer to: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1202 Software] 4.2 Change the battery low voltage to implement safe shutdown. default is less than 3.20Vdc.)
- 17:06, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on X306 (Hi，Sorry, this feature is not supported.)
- 17:02, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on LVDS Adapter (Hi，This board is limited to LVDS output, the resolution must be the VESA standard, and the driver board should be at least V59 grade, or the driver board is not available. Because it is the DIY product, so we can not guarantee the compatibility.hope to get your understanding.)
- 16:52, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on X728-script (Hello，The X728 is designed for the Raspberry Pi and we have not tested it with the Orange Pi.)
- 16:47, 22 August 2024 Lisa talk contribs performed unknown action "comments/add" on X1300 Hardware (Hello,We have replied to your email on the same day we received it. Maybe it was ignored or sent to spam, please check your mailbox again. and we have updated the information in step 9. Please test againX1300 Software)
- 14:34, 22 August 2024 Abby talk contribs uploaded a new version of File:X680-IMG-5531-diagram.jpg
- 11:57, 22 August 2024 Abby talk contribs created page Pi5-POE-PD-A (Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual== * Hardware Installation: * How to make it work: ==FAQ== <!-- 这里提供了一个Q&A的...")
- 17:14, 21 August 2024 181.41.131.77 talk performed unknown action "comments/add" on X306 (Hi! Is there any way to read the battery percentage (25%,50%,75% and 100%) from the Pi using the onboard pins? Thanks!)
- 16:31, 21 August 2024 Abby talk contribs performed unknown action "comments/delete" on X-UPS1
- 16:26, 21 August 2024 Abby talk contribs deleted page File:X-ups1-acce-size.jpg
- 16:25, 21 August 2024 Abby talk contribs created page File:X-ups1-Packing-List.jpg
- 16:25, 21 August 2024 Abby talk contribs uploaded File:X-ups1-Packing-List.jpg
- 16:18, 21 August 2024 182.191.70.99 talk performed unknown action "comments/add" on X728-script (Hi. I am suing this device with Orange Pi 5+. But the I2C does not work. Can anyone guide?)
- 15:33, 21 August 2024 Abby talk contribs created page File:X1001-Interface-front-back.jpg
- 15:33, 21 August 2024 Abby talk contribs uploaded File:X1001-Interface-front-back.jpg
- 14:22, 21 August 2024 210.233.120.83 talk performed unknown action "comments/add" on LVDS Adapter (Does it support 1680x1050 resolution?)
- 00:15, 21 August 2024 130.76.187.204 talk performed unknown action "comments/add" on X1300 Hardware (Does not work with my Rp v5. Fails at step 9 of instructions 9. Set formats media-ctl -d /dev/media2 -l \csi2'\:4 -> '\rp1-cfe-csi2_ch0'\:0 [1]' media-ctl -d /dev/media2 -V \csi2'\:0 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]' media-ctl -d /dev/media2 -V \csi2'\:4 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]' Several emails/contact forms sent to support. No reply from Tech support as of yet.)
- 23:13, 20 August 2024 182.52.185.30 talk performed unknown action "comments/add" on X1202 (Thanks, one more question. Does this unit has undervoltage protection (and which voltage)? I don't see this detail on product page.)
- 18:17, 20 August 2024 Abby talk contribs created page File:X1013-IMG-8838-How-to-Power.jpg
- 18:17, 20 August 2024 Abby talk contribs uploaded File:X1013-IMG-8838-How-to-Power.jpg
- 18:16, 20 August 2024 Abby talk contribs deleted page File:X1013-IMG-8838-How-to-Power-1.jpg
- 17:46, 20 August 2024 Abby talk contribs created page File:X1013-IMG-8838-How-to-Power-1.jpg
- 17:46, 20 August 2024 Abby talk contribs uploaded File:X1013-IMG-8838-How-to-Power-1.jpg
- 17:38, 20 August 2024 Lisa talk contribs performed unknown action "comments/add" on X1202 (Hello,LED light off does not mean shutdown.please refer to X1202 Hardware#Battery voltage level indicators)
- 17:23, 20 August 2024 Harry talk contribs performed unknown action "comments/add" on X1200 (Hello When Pi 5 is turned off or X1200 is turned off, there is no power output at 5V OUT.)
- 16:43, 20 August 2024 Lisa talk contribs performed unknown action "comments/delete" on X1200
- 16:43, 20 August 2024 Lisa talk contribs performed unknown action "comments/delete" on X1200
- 16:41, 20 August 2024 Lisa talk contribs performed unknown action "comments/add" on X400 V3.0 (Sorry, the Case is no longer in production. If you can 3D print, we can provide you with the dimensions of X400-C4.)
