Difference between revisions of "X829"

Latest revision as of 10:41, 16 November 2021

X829 V1.3

X829 Interface

X829 HDD

X829 V1.3

X829 with X735

X829 PCB Size

X829 Packing List

Overview

The X829 dual 2.5" SATA HDD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 4B. Its elegant and ultra-compact design allows two 2.5" HDD/SSD to be conveniently attached to Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again.

The X829 can be the perfect storage solution for your home media center and building Network-attached storage (NAS) for storing and streaming your own videos, music, and digital photos around the house and even across the world.

Please refer to X822 or X828 if you need dual SATA board for raspberry pi 3.

Features

FOR USE WITH	Raspberry Pi 4 Model B
Operating System	All Raspberry Pi operating systems
KEY FEATURES	Ideal storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield Supports dual 2.5 SATA HDDs/SSDs working at the same time Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying ^[1] Provides additional 2 USB3.1 Gen1 ports for Raspberry Pi Function to power the RPI via XH2.54 only needing a single power supply Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers Integrated USB 3.1 Gen 1 Hub Controller USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4 Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac ^[2] Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed Ultra-compact design allows for ease of use two HDD/SSD with Raspberry Pi 4 LED blue indicator indicates each drive status Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
SPECIFICATION	Power supply: 5.1Vdc +/-5% , ≥4A Ports & Connectors: DC jack - 5.5x2.5mm USB socket - USB 3.0 type A Power connector - XH2.54 2-pin SATA socket - 7+15P Female PCB Size 107.5mm x 85mm
NOTES	↑ A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition ↑ Additional USB3.0 A Male to A Male cable is required (not supplied) For use with original power supply unit only Do not power your Raspberry Pi via the Pi's 40-pin header and Type-C USB socket at the same time.

How to Power

About the HDD Thickness

Packing List

X829 HDD/SSD expansion board x 1
USB 3.0 Cable x 1
2-Pin Power Connection Wire x 1
Power daughter board x 1
Spacer F/F M2.5 x 15mm x 7
Spacer M/F M2.5 x 11+1mm x 1
Screw M2.5x5mm x 11
Screw M3 x 6mm x 4

Matching Metal Case

Please refer to X829-C1.

Installation Video

Installation video for Raspberry Pi 4+X829+X735+X829-C1 Case: https://youtu.be/0oQr77aQ6rk

Installation video for Raspberry Pi 4+X829+X708/U100+X829-C1 Case: https://youtu.be/Lz2KAxhcK2E

User Manual

About USB boot please refer to Does the X825/X855 support USB boot
How to mount a USB drive on the Raspberry Pi, pls refer to mount a USB drive on the Raspberry Pi
How to set up OpenMediaVault on Raspberry Pi 4
File:Usb3-frequency-interference-papers.pdf

FAQ

Q1. Does the X829 stackable?

A: No, X829 is not stackable, please refer to X828, among the 2.5" SATA shield I(X820 X825 X829 X828), ONLY X828 is stackable.

Q2: Do X series NAS shields support UASP?

A: 2.5", 3.5" NAS shield(such as X825 X829 X829 X835 X832) use JMS583 IC, and all supports UASP(NOTE: Not supported UASP in earlier versions， produced before July 1, 2020), to prevent HDD/SDD from entering the hibernation state,

but M.2 MSATA SSD (X862 V1.0) only support TRIM not UASP; M.2 MSATA SSD (X862 V2.0)only support UASP not TRIM.

Enable comment auto-refresher

Anonymous user #27

34 months ago

Score 0

Hello, i have pi4b + x829 + x708.

When i plug x829:upport -> with Usb3cable -> pi4:usb2 port, hdd is visible and detected. I have such (good) picture:

pi@raspberrypi:~ $ sudo lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 008: ID 174c:0829 ASMedia Technology Inc. Bus 001 Device 007: ID 174c:0829 ASMedia Technology Inc. Bus 001 Device 006: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

When i plug x829:upport -> width Usb3cable -> pi4:USB3 port then hdd is not detected, and picture is bad.

pi@raspberrypi:~ $ sudo lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Both pi4:Usb3 ports are checked, and ok.

What can i do to solve it?

Permalink | Reply

Anonymous user #27

34 months ago

Score 0

Oh, self answer:

It seems that my hdd needs more time to start, when plugged to usb3 port (geekworm, why?).

So i forced to give it more time to spin up.

Two steps to do it:

1. Set USB boot first, instead of SD (but usb is not bootable). So pi4 give it some power on start:

sudo -E rpi-eeprom-config --edit and set BOOT_ORDER=0xf14

2. Give it timeout to spin:

sudo vi /boot/config.txt

program_usb_boot_timeout=5 max_usb_current=1 program_usb_boot_mode=1

This works, but now system starts for a longer time. Is there a way to get things working not in a such tricky way?