X5500

From Geekworm Wiki
Revision as of 16:52, 15 June 2021 by Cindy (talk | contribs) (→‎FAQ)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
X5500 dac board - front
X5500 dac board - back
X5500 dac board
X5500 + X857 + Pi 4
X5500 + X710 + Pi 4

Features

FOR USE WITH Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B
OS
  • Moode Audio Player
  • OSMC
  • Openelec
  • Raspbian Jessie
  • Volumio
  • Pi Core Player
KEY FEATURES
  • Full-HD audio – up to 24-bit/192kHz playback
  • Audiophile ESS Technology Sabre premier stereo DAC ES9023
  • ES9023 delivers jitter-free studio quality audio with 112dB DNR
  • Built in High quality Class-D stereo audio amplifiers (TI TPA3118D2)
  • Up to 2×30W Into a 8-Ω BTL Load at 24Vdc
  • Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
  • Uses the Texas Instruments ultra-low-noise voltage regulator (output noise< 10μVRMS)
  • Uses the Texas Instruments high efficiency step-Down DC converter (up to 95%)
  • 6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi
  • Uses the genuine ALPS RK163 series potentiometer for smooth volume adjustment
  • High quality digital amplifier inductors
  • Onboard pluggable speaker screw terminals
  • Onboard XH2.54 connector providing 5V output to power other devices
  • Optimal design realizes middle -high quality sound and low distortion
  • Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
  • Powers the Raspberry Pi - no additional power supply
  • Reserved Raspberry Pi GPIO 40-pin header
  • Pop-noise can be improved by enabling GPIO control
  • AMP can be enabled / disabled with jumper link
  • Compatible with X710 for intelligent power mgmt and cooling your amplifier [1]
  • Compatible with X857/X856/X855 for mSATA SSD storage board, compatible with X872 for M.2 NVME SSD board, compatible with X862 for M.2 SATA SSD board [2]
SPECIFICATION
  • Power supply: 6-26Vdc,≥3A recommended X830 V2.0#Power Supply(Optional)
  • GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
  • RCA Analog audio output level : 2V RMS
  • Amplifier max output power: 2×30W at 4Ω BTL Load at 24Vdc
  • Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
  • PCB size 85 x 57mm
NOTES
  1. Additional M2.5*21 M/F spacers & 2-pin XH2.54 cable required (not supplied)
  2. Additional M2.5*8 M/F spacers required (not supplied)

Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C or Micro USB socket at the same time

Packing List

  • X5500 Expansion Board x 1
  • Screw M2.5 *6mm x 8
  • Spacer F/F M2.5 *20mm x 4

User manual

FAQ

Q1: What kind of power supply does X5500 use?

A: X5500 use DC 6V~26V widht voltage input, 55x25 jack, please refer to X830 V2.0#Power Supply(Optional)


Q2: How to solve the heat dissipation problem?

A: Please refer to here: embedded armor aluminum alloy heatsink can solve your problem.


Q3: Does x5500 support safe shutdown?

A: YES, You can use X710 to achieve safe shutdown function.


Q4: Does X5500 support hdd/sdd storage function?

A: Yes, you can use X825/X857/X862/X872/X829 etc. to get storage function.


Q5: Is there a matching case to support X5500?

A: No yes, we look forward to your feedback, we will consider making a shell according to the needs of users.


Q6:Does the X5500 support to use with X735?

A:The X5500 only support to use with the X735 V2.5 VERSION, NOT support other version. And you need need extra one piece 2pin power cable.

The connection is as follow:

  • X5500 - 5V OUT -> X735 – 5V IN
  • X5500 – 5V PWR -> X735 – 5V OUT

PWR-Open, the power supply should be connected to X5500 ONLY.


Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.