Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 01:34, 6 March 2024 86.171.117.117 talk posted a new comment on X1001 (I have the same hardware X1001 and a Crucial P3, which works perfectlty. Most likely reason for problem, you must format the SSD (EXT4) before installing on the X1001 in the PI.)
  • 00:35, 6 March 2024 173.239.224.146 talk posted a new comment on X1202 (After using the USB C port on the x1202 I heard the board making small ticking noises. After I pulled the plug the entire unit lost power. Is the USB C port not the preferred port?)
  • 21:30, 5 March 2024 93.42.109.113 talk posted a new comment on X728 (My % of charge is above 100, like 104...it is normal?)
  • 16:04, 5 March 2024 Harry talk contribs posted a new comment on X1201 (Nothing will happen, but it won't charge)
  • 15:58, 5 March 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hello,Under normal circumstances, its power supply needs can be met. If it doesn't work, you can try changing the power supply and test it.)
  • 15:54, 5 March 2024 Lisa talk contribs posted a new comment on LVDS Adapter (Hello，Our test can support 1024x600 resolution, but because there are too many screen models, we cannot guarantee compatibility with all screens.)
  • 15:33, 5 March 2024 Lisa talk contribs posted a new comment on X1202 (NOT support.)
  • 14:58, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can run "lspci" command to check the controller brand of the SSD, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problem NVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
  • 14:56, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can check the SSD controller through lspci, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problemNVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
  • 14:51, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,It's hard to see what's wrong here. Please send screenshot via email[support@geekworm.com]. And tell us your order number. Thanks)
  • 11:29, 5 March 2024 Lisa talk contribs posted a new comment on P579 (Hi,We also considered this issue when designing P579/P580 Case, but it is difficult to implement. If you have any good switch ideas, please recommend them to us.Thanks)
  • 09:54, 5 March 2024 109.111.162.185 talk posted a new comment on LVDS Adapter (Helo. I've bought v1.5 board and trying to connect it to convert LVDS signal from AC8257 SOC to HDMI but nothing works. 1.Edid on HDMI receiver is necessary or not? 2. I have 1024x600 resolution is it supported?)
  • 04:50, 5 March 2024 192.77.184.26 talk posted a new comment on X1202 (Can this board tolerate being powered on DC jack AND USB-C simultaneously?)
  • 19:32, 4 March 2024 103.193.138.118 talk posted a new comment on X1201 (@Harry Yes but what if someone ACCIDENTALLY uses the wrong port? What will happen?)
  • 18:58, 4 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ)
  • 18:55, 4 March 2024 Lisa talk contribs posted a new comment on C779 (Hi,The LED does not support setting, you can use something to cover it.)
  • 18:53, 4 March 2024 Lisa talk contribs posted a new comment on X729 (Hi,X729 is not compatible with Pi5. Please refer to X1200/X1201/X1202 UPS for Pi5.)
  • 18:44, 4 March 2024 Lisa talk contribs posted a new comment on X1002 (Hi,Sorry for the inconvenience, could you tell us your order number? Where did you buy it? It may be a problem with the mounting holes of the X1002 board. Please contact us via email and we will provide a solution. support@geekworm.com)
  • 18:38, 4 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,X728 not support 3xAA adaptor)
  • 17:58, 4 March 2024 46.142.176.194 talk posted a new comment on NASPi Gemini 2.5 (I am planning to use a high quality linear power supply with the NASPi Gemini 2.5 V2.0 Dual 2.5 Inch SATA HDD/SSD NAS Storage Kit with DC 6-18V Wide Voltage Input The power supply can provide 12, 15 or 16V / 3A. I am using a RPi 4 and just a single 8TB Samsung 870 QVO SSD (according to spec, it needs 3.3 Watt max.) Will that very linear power supply be sufficient for the NASPi Gemini 2.5 V2.0? If so, would it also be sufficient, If I add a second SSD and use Raid mode?) Tags: Mobile web edit, Mobile edit
  • 19:24, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (dmesg shows: [ 0.394368] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: [ 0.394376] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] [ 0.394387] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 [ 0.394392] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 [ 0.394398] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.395575] brcm...) Tags: Mobile web edit, Mobile edit
  • 18:58, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (The lspci brings this answer: 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0001:01:00.0 Ethernet controller: Device 1de4:0001) Tags: Mobile web edit, Mobile edit
  • 18:33, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (I have a KingSpec M.2 NVMe mounted and it does not show up with lsblk. The blue light is on. How can i check what the problem is?) Tags: Mobile web edit, Mobile edit
  • 06:22, 3 March 2024 67.189.231.55 talk posted a new comment on P579 (bought P579 case and shield for it. Went together fine, waiting on drive so have no comments on operation. Was there or is there going to be a sw cover for the pi power sw. Using a fingernail now to operate it and it is exposed to dust and quite delicate.)
  • 03:56, 3 March 2024 73.242.156.151 talk posted a new comment on X1001 (I got the X1001 and a Crucial P3 nvme but Raspberry Pi does not see it. Is the Crucial SDD compatible and how do I troubleshoot?)
  • 02:24, 3 March 2024 93.42.109.113 talk posted a new comment on X728 (Can I use 3xAA adaptor instead of 18650 battery?)
  • 16:40, 2 March 2024 77.39.172.42 talk posted a new comment on X1002 (Just purchased and discovered the mess with the screws... SHAME ON YOU! people are complaining about this since a month and you still sell this kit with wrong screws! Please provide detailed specs on what screws should I buy now. I can't wait for sending back the item and search for an alternative!) Tags: Mobile web edit, Mobile edit
  • 23:07, 1 March 2024 148.252.147.227 talk posted a new comment on X729 (I would like to know this too. Having a large range input would be useful and none of the official RPi 5 ones can cater for that.) Tags: Mobile web edit, Mobile edit
  • 18:01, 1 March 2024 93.240.96.232 talk posted a new comment on C779 (Hello, is it possible to turn of the onboard led?)
  • 14:44, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,It is difficult to determine the reason for the very slow speeds. It may be an issue with the FFC cable or a compatibility issue. Thanks for your feedback.We will continue to monitor this issue to find the best solution.)
  • 12:37, 1 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,If the board is burned, we do not recommend continuing to use it to avoid safety concerns.)
  • 12:27, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We will be upgrading P579 Case to support X1004, the new version is in production. It will come soon. Please stay tuned for updates to our wiki.Thank you.)
  • 12:23, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We have not tested Coral M.2 SSD; but please confirm 2 things: ① The SSD interface must be NVMe M.2 Key-M or Key-B&M; ②We recommend avoiding the NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility. You can run "lspci" command to check the controller brand of the SSD.)
  • 12:09, 1 March 2024 Lisa talk contribs posted a new comment on LVDS2 (Hi,LVDS2 and LVDS 1.5/V20 are different manufacturers with different board designs and cables, there is no functional difference.)
  • 11:40, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,Normally there is no need to power X1001 separately. SSD power supply needs can be met through FFC cables. If you want to power X1001 separately, you can use a 2pin wire to power it through 5V IN of X1001.)
  • 21:59, 28 February 2024 94.254.123.42 talk posted a new comment on X728 (Hi. I have the 2.1 version without the "Battery Reverse Polarity Protection circuit".. and I really wish I did because I did a oopsie. I realized the issue a second later when smoke started to plume. I thought the device was dead, but interestingly enough, it does seem to work still when I put them in correctly - so question is, is it dangerous to use the device now when "something" have burned or did it not "burn enough" to break the board?)
  • 19:56, 28 February 2024 46.59.71.143 talk posted a new comment on X1004 (When will the case be out?)
  • 01:22, 27 February 2024 69.42.12.30 talk posted a new comment on LVDS2 (What is the difference between this LVDS2 model and what your site says is the "newest" LVDS 1.5 model? To be clear, I am NOT asking about V20 vs 1.5. Is this LVDS2 model actually the newest model (newer than even the 1.5 model) but the text description on your site is just out of date? Or is 1.5 actually the newest model?) Tags: Mobile web edit, Mobile edit
  • 23:40, 26 February 2024 99.237.2.44 talk posted a new comment on X885-software (On a fresh install of the OS, be sure to 'apt -y install git' before trying to run the first script. It's not installed automatically.)
  • 22:55, 26 February 2024 77.242.86.148 talk posted a new comment on X1001 (I ordered a X1001 board and as soon as I connect an SSD to it, it makes a high pitched noise similar to coil whine. Is there something I can do about it? Otherwise it works fine.)
  • 14:56, 26 February 2024 103.192.227.88 talk posted a new comment on X729-Software (1. OLED displays voltage and current output. 2. You can rfer to bat.py file)
  • 14:55, 26 February 2024 103.192.227.88 talk posted a new comment on X729 (OLED displays voltage and current output)
  • 14:51, 26 February 2024 Harry talk contribs posted a new comment on X1002 (We are very sorry, this is our mistake, we have also discovered this problem and are working on it. You can return it for a refund)
  • 14:48, 26 February 2024 Harry talk contribs posted a new comment on X1201 (Judging from the fault description, it must be that I2C is not enable.Check ing your config.txt)
  • 14:47, 26 February 2024 Harry talk contribs posted a new comment on X1201 (This is a UPS, so it is normal logic to supply power from the type-c of the UPS.)
  • 14:45, 26 February 2024 Harry talk contribs posted a new comment on P580 (Thank you for your feedback. It may be that the plastic case is the final case and we will consider designing & manufacturing a plastic case as well!)
  • 14:44, 26 February 2024 Harry talk contribs posted a new comment on LVDS Adapter (Sorry, not supported)
  • 14:43, 26 February 2024 Harry talk contribs posted a new comment on X728 (There may be those who prefer the old ways)
  • 14:41, 26 February 2024 Harry talk contribs posted a new comment on X876 (X876 is not compatible with PI 5. You can refer to X1001)
  • 00:19, 26 February 2024 73.176.32.190 talk posted a new comment on X1002 (I had to drill out the holes in the standoffs on the board to get the screws through the raspi and the X1002...used the brass nuts to secure the screws on the X1002 side. Worked and X1002 functions.)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"