C296
Overview
C296 is a 10mm thickness aluminum alloy heatsink special designed for raspberry pi zero 2 w, it is also compatible with raspberry pi zero w by using thermal pads of different thicknesses (1-1.3mm is ok, better to use 1.3mm).
This radiator adopts a U-shaped groove design to increase the contact area with air, thereby speed up heat dissipation of raspberry pi zero 2 w. And embedded installation design allows user for better DIY extension.
C296 also compatible to use with M200 and its matching aluminum case.
Geekworm Cooler Series:
| Picture | Model | Compatible With | Material | Thickness(mm) | Support Fan |
|---|---|---|---|---|---|
 |
C519 | Raspberry Pi Computer Module 5 (CM5) | Aluminum Alloy | 15mm | √ support fan installation |
 |
Pi 5 official Active Cooler | Raspberry Pi 5 | Aluminum Alloy | 10mm | √ with 4-pin 3007 blower fan |
 |
H505 | Raspberry Pi 5 | Aluminum Alloy | 11.6mm / Net Weight: 39g | √ with 4-pin 3007 blower fan |
 |
H509 | Raspberry Pi 5 | Aluminum Alloy | 15mm | × don't support fan installation |
 |
H510 | Raspberry Pi 5 | Brass | 10mm / Net Weight: 55g | √ with 4-pin 3007 blower fan |
 |
Argon THRML 30-AC | Raspberry Pi 5 | Aluminum Alloy | 9.6mm | √ with 4-pin 3007 blower fan |
 |
H501 | Raspberry Pi 5 | Aluminum Alloy | 9.5mm | √ with 4-pin 3007 blower fan |
 |
H502 | Raspberry Pi 5 | Brass | 4mm | × support 30x30 fan installation |
 |
P165-B | Raspberry Pi 4 | Aluminum Alloy | 11mm | × support 30x30 fan installation |
 |
P165-A | Raspberry Pi 4 | Aluminum Alloy |
7mm/8mm (Version updated; 2 versions available, 8mm (new), compatibility unaffected) |
× support 25x25 fan installation |
 |
H402 | Raspberry Pi 4 | Brass | 4mm | × don't support fan installation |
 |
C235 | Raspberry Pi Computer Module 4 (CM4) | Aluminum Alloy | 12mm | × support 30x30 fan installation |
|
C296 | Raspberry Pi Zero 2 W | Aluminum Alloy | 10mm | × don't support fan installation |
Features
- 10mm thickness embedded Aluminum Heatsink Compatible with Raspberry Pi Zero 2 W / Raspberry pi zero w
- U-shaped groove design to speed up heat dissipation
- Heatsink dimensions: 64x29x10 mm / 2.51x1.14x0.39 inch
- Net weight: 18g/0.04lb
Installation Video
How to use Copper Heatsink
Packing List
- 1 * 10mm thickness aluminum alloy heatsink (C296)
- 4 * PM2.5*8 screws
- 4 * M2.5 nuts (Black)
- 2 * 6W Thermal Pads （dimensions: 15*30mm, 1mm and 0.5mm thickness)
1mm thermal pad is for CPU part, and 0.5mm thermal pad is for wifi part
FAQ
Loading comments...