H510
Contents
Overview
A new heavy-duty brass heatsink (Model: H510) has been released, with heat dissipation capabilities far exceeding other heatsinks, including the Raspberry Pi official cooler H500. Copper has twice the thermal conductivity of aluminum, so there's no doubt that the H510 cooler will have better heat dissipation capabilities than aluminum heatsinks with the same heat dissipation area.
Geekworm H510 ultra-thin brass heatsink for Raspberry Pi 5, dual active and passive cooling, featuring a 3007 PWM fan and pre-applied thermal pads for superior and quiet thermal performance.
Geekworm Cooler Series:
| Picture | Model | Compatible With | Material | Thickness(mm) | Support Fan |
|---|---|---|---|---|---|
 |
C519 | Raspberry Pi Computer Module 5 (CM5) | Aluminum Alloy | 15mm | √ support fan installation |
 |
Pi 5 official Active Cooler | Raspberry Pi 5 | Aluminum Alloy | 10mm | √ with 4-pin 3007 blower fan |
 |
H505 | Raspberry Pi 5 | Aluminum Alloy | 11.6mm / Net Weight: 39g | √ with 4-pin 3007 blower fan |
 |
H509 | Raspberry Pi 5 | Aluminum Alloy | 15mm | × don't support fan installation |
 |
H510 | Raspberry Pi 5 | Brass | 10mm / Net Weight: 55g | √ with 4-pin 3007 blower fan |
 |
Argon THRML 30-AC | Raspberry Pi 5 | Aluminum Alloy | 9.6mm | √ with 4-pin 3007 blower fan |
 |
H501 | Raspberry Pi 5 | Aluminum Alloy | 9.5mm | √ with 4-pin 3007 blower fan |
 |
H502 | Raspberry Pi 5 | Brass | 4mm | × support 30x30 fan installation |
 |
P165-B | Raspberry Pi 4 | Aluminum Alloy | 11mm | × support 30x30 fan installation |
 |
P165-A | Raspberry Pi 4 | Aluminum Alloy | 7mm | × support 25x25 fan installation |
 |
H402 | Raspberry Pi 4 | Brass | 4mm | × don't support fan installation |
 |
C235 | Raspberry Pi Computer Module 4 (CM4) | Aluminum Alloy | 12mm | × support 30x30 fan installation |
 |
C296 | Raspberry Pi Zero 2 W | Aluminum Alloy | 10mm | × don't support fan installation |
Features
- High-Density Brass Construction: 20g heavier than aluminum equivalents, providing greater heat capacity for sustained thermal management in a thin, low-profile design
- Dual Active & Passive Cooling: Combines a silent heatsink with a 3007 PWM fan for adjustable, efficient cooling from idle to full load
- Easy Installation: Pre-applied thermal pads with peel-off film enable quick, secure, and tool-free setup
- Optimized 3007 PWM Fan: Ensures quiet operation and precise speed control based on temperature, balancing cooling power and noise
- For Raspberry Pi 5: Includes the H510 heatsink unit (fan integrated), designed to be space-saving and compatible with Raspberry Pi 5 Module B
Packing List
- 1 x H510 active cooler with blower PWM fan
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher