Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 20:41, 30 September 2025 89.182.179.212 talk posted a new comment on X1300 Software (How do I deactivate the red LED on the board?)
  • 15:47, 30 September 2025 81.245.89.132 talk posted a new comment on X1200 (Dear Lisa, Thanks for your reply. But, FAQ Q9 is precisely the reason why I raised my question, which is "How can I find an adequate battery?")
  • 14:51, 30 September 2025 Lisa talk contribs posted a new comment on X1100 (Hello, Thanks for your feedback. Currently, most hard drives are thinner, so we don't reserve more space. Hope to get your understanding.)
  • 14:43, 30 September 2025 Lisa talk contribs posted a new comment on X1200 (Hello, Please refer to FAQ 1 and 2. If there is no problem with the setup, please contact us by email <info@geekworm.com>. Please send us a picture of the installation connection and tell us your order number. thank you.)
  • 12:09, 30 September 2025 Lisa talk contribs posted a new comment on X1200 (Hello,Please refer to [FAQ: Q9: What battery is recommended for this ups shield], and please note the size requirements and the use of flat-head 18650 batteries.)
  • 11:34, 30 September 2025 47.34.236.36 talk posted a new comment on X1100 (I'm really disappointed that I can't use a 15mm thick HDD with this case. Only SSDs are less than 11mm. Please make a case that can accommodate this with RPi5. I can't find an HDD this thin.)
  • 00:55, 30 September 2025 177.12.49.7 talk posted a new comment on X1200 (When I plug an external hdd low voltage warning. Not supose to. Using raspberry official psu. EXT5v=5.07 What to do?)
  • 17:18, 29 September 2025 81.245.89.132 talk posted a new comment on X1200 (Hi, I am interested in this X1200 model. But I failed so far to find adequate 18650 batteries especially without built-in protection circuit. Looking for "Samsung 35E 18650 lithium battery" or "Panasonic NCR18650" returns no result. My main concerns being safety and, of course, efficiency, how can I find adequate batteries? Thanks in advance for any support. Pascal.)
  • 21:46, 28 September 2025 91.127.70.136 talk posted a new comment on X1011 (Yes, I also had a problem during writing to all disks (RAID-5). The system was unstable and degraded the RAID array. The only thing that helped was using a DC adapter. It didn't work with the RPI 47W USB-C adapter. Sadly usb-c will be better :()
  • 10:45, 28 September 2025 Lisa talk contribs posted a new comment on X729 (Hello, No, it is direct output. There is no need to connect to other power sources when using this UPS.)
  • 10:16, 28 September 2025 Lisa talk contribs posted a new comment on X306 (Hello, X306 is an uninterruptible power supply(UPS) and does not have power management function. Hope to get your understanding.)
  • 10:00, 28 September 2025 Lisa talk contribs posted a new comment on X1202 (Hello, How to get x1202 work: please refer to [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1202 Software])
  • 01:32, 28 September 2025 213.47.1.236 talk posted a new comment on X306 (Is there a way to read the battery power via the raspi pins so its possible to make a shutdown when the battery is reaching low level. i would solder a voltage in parallel to one battery and to one of the gpio pins and measure the voltage of the battery. why you didnt not implemented this by default as this should be a ups system !?)
  • 16:15, 27 September 2025 83.227.223.69 talk posted a new comment on X1202 (Hi. Is there anything specific I need to think about when using the X1202 to power an RPI 5 that has a Pi camera module v3 attached to it? I've added PSU_MAX_CURRENT=5000 already, anything else I need to configure to ensure it runs smoothly?)
  • 15:58, 26 September 2025 176.157.132.89 talk posted a new comment on X729 (Hello, is there a reverse voltage protection for the power supply on the board ?)
  • 07:24, 26 September 2025 216.131.74.56 talk posted a new comment on X1300 Software (I have this working, but the colors are off. Seem BGR instead of RGB.)
  • 12:32, 25 September 2025 Lisa talk contribs posted a new comment on X1203 (Hi,Generally, it is designed for 18650 batteries, with a flat head and no protection circuit. If used with lithium batteries, you can choose one with a protection circuit. Note:If using a lithium battery, the required voltage is 3.7V; if using a battery pack, please make sure it is a parallel battery pack. There are 2 XH2.54-2P battery connectors on board, it is recommended to use the same type of battery.)
  • 22:58, 24 September 2025 189.33.192.68 talk posted a new comment on WEMOS ESP32 Board with 18650 Battery Holder (Hello there. If the battery runs out, and the esp32 shuts down, when the usb charger is connected, does the esp32 turn again or you need to switch off and on the board?)
  • 22:13, 23 September 2025 46.10.161.91 talk posted a new comment on X1003 (hello, actually checking this wiki from time to time, since want to buy X1003 (it fits my Argon NEO 5 Case for Raspberry Pi 5). But can not undertand why GeekWorm can not simply provide tested SSDs in this article - like they did it for incombatible ones. We need to go and to watch video with couple of tested SSDs in the video description... It doesn't look fine as for the customers who want to buy a nice product (and yes, geekworm products are great). Please be so kind and post the list of S...)
  • 21:36, 22 September 2025 93.67.103.235 talk posted a new comment on X1011 (Hello, has anyone managed to fix the system crash when writing to all four disks at the same time? Support responded after some analysis that it works for them...!! LOL)
  • 21:34, 22 September 2025 93.67.103.235 talk posted a new comment on X1011 (Ciao, qualcuno è riuscito a risolvere il crash del sistema durante la scrittura su tutti e quattro dischi contemporaneamente? Il supporto dopo qualche analisi, ha risposto che a loro funziona...!! LOL)
  • 14:55, 22 September 2025 Lisa talk contribs posted a new comment on How to enable I2C (Hi, Different hardware products may have different I2C addresses.)
  • 11:59, 22 September 2025 99.110.163.126 talk posted a new comment on X1203 (Sorry, I could have been clearer. My main question is: What characteristics should I evaluate to determine if some battery will work with this device? Is the list I provided a complete list? > X1203 support 3.7V lithium polymer battery I think this is a bit misleading -- almost all 3.7V LiPo batteries I see for sale have integrated protection circuitry, which would violate the listed requirements for the x1203. _Some_ 3.V liPo batteries are likely acceptable, but it looks to me that most ar...)
  • 02:34, 22 September 2025 82.4.244.105 talk posted a new comment on How to enable I2C (hi.I ran the i2c detect. but I don't get "40 listed (current/voltage/power) Were have I gone wrong Thanks)
  • 15:50, 20 September 2025 Lisa talk contribs posted a new comment on X1203 (Hi, X1203 support 3.7V lithium polymer battery. please refer to the second image information [X1203 battery connection].)
  • 04:51, 20 September 2025 98.168.104.172 talk posted a new comment on X1203 ((sorry, missed this in the initial comment) and 5. Battery must not have a protection circuit built-in.)
  • 04:48, 20 September 2025 98.168.104.172 talk posted a new comment on X1203 (The recommended battery is an 18650, but this just specifies the shape. I think a 'standard' 3.7V battery should be perfectly acceptable so long as the connection is appropriate -- is this correct? In more depth, I think the only characteristics that actually matter about the battery are: 1. Battery has proper connector 2. Battery accepts charging voltage up to 4.23V 3. Battery will output 4.1V or above when fully charged 4. Battery accepts charging current ranging from 2.3 and 3.2 A I woul...)
  • 11:03, 19 September 2025 Lisa talk contribs posted a new comment on X1004 (Hello, Could you please email us more details, such as what system you are using? A picture of the installation and connections would be helpful. info@geekworm.com)
  • 13:13, 18 September 2025 31.219.95.188 talk posted a new comment on X1004 (I recently bought x1004 and installed Kingston n2 1 tb and verbatim 2tb with maxio controller. The board runs for some time then crashes the pi into shutdown. What is the solution?)
  • 09:12, 18 September 2025 Lisa talk contribs posted a new comment on X1011 (Hello , That is not supported.)
  • 22:21, 17 September 2025 31.30.84.130 talk posted a new comment on X1011 (Will this work if i put ASM1166 pcie to sata board to one of m.2 slots and 3 NVMe drives to others??)
  • 06:54, 17 September 2025 80.29.98.133 talk posted a new comment on X-UPS1 (Battery cut-off should be at 2.5V, not 2.4V. All batteries in the market has 2.5V as minimum value.)
  • 12:26, 16 September 2025 Lisa talk contribs posted a new comment on X651 (Hi, Yes,you are right. but please note that the poe switch must support 802.3af.)
  • 09:11, 16 September 2025 80.29.98.133 talk posted a new comment on X-UPS1 (Ok I had just understood what happens: When you stack multiple boards, boards will be discharged ONE BY ONE. NOT in parallel. I need to test this more, but it looks like starts to discharge the one with the lower charge first.)
  • 08:59, 16 September 2025 80.29.98.133 talk posted a new comment on X-UPS1 (I'm facing the same issue, I have 3 boards but only one board discharges (in my case, the one at the middle) All of them are version 1.3 boards.)
  • 13:23, 15 September 2025 49.239.64.102 talk posted a new comment on X651 (The voltage of PoE 5.1V+- 3% is really correct ? Generally, PoE PD voltage range is 37 to 54V. (It seems that 5.1V is the DC/DC converter internally ouputing.)) Tags: Mobile web edit, Mobile edit
  • 12:17, 15 September 2025 Lisa talk contribs posted a new comment on X1012 (Hi, Is the status LED off? [Missing 3v3 on the test point] -- Could you please provide picture instructions via email? [info@geekworm.com] and please tell us your order No. Thanks.)
  • 01:10, 14 September 2025 96.239.119.236 talk posted a new comment on X1012 (not getting the status LED to turn green. missing 3v3 on the test point.)
  • 14:25, 8 September 2025 Lisa talk contribs deleted comment #5995 on X735 Software
  • 14:25, 8 September 2025 Lisa talk contribs posted a new comment on X735 Software (Hi, please refer to X735-script)
  • 14:24, 8 September 2025 Lisa talk contribs posted a new comment on X735 Software (Hello, Please see the first sentence at the top <span class="tb_red"><big>This tutorial is deprecated, see X735-script</big></span>)
  • 20:07, 7 September 2025 66.177.29.143 talk posted a new comment on X735 Software (EQUIPMENT: x735 v3.0, X825 v2.0, Raspberry pi 4b 8G, X825-C8 case with momentary switch power off, Bookworm Image. Anyone familiar with a tutorial for set up on the script side for this?)
  • 15:03, 5 September 2025 98.97.61.104 talk posted a new comment on X1300 Software (working here after firmware updates github steelhead99x/RPi5_hdmi_in_card 6.12.34-rpt-rpi-2712 firmware x1301 v1.1 hardware)
  • 18:34, 3 September 2025 185.82.115.110 talk posted a new comment on X1004 (Hi also SW Raid not works?)
  • 10:03, 3 September 2025 Lisa talk contribs posted a new comment on N311 (Hello There is no mounting holes at the bottom, does not support the expansion of Hats at the bottom. You can expand Hats on the top cover.)
  • 17:51, 2 September 2025 157.45.63.166 talk posted a new comment on N311 (Does this case really have bottom mounting holes to support accessories and base hats) Tags: Mobile web edit, Mobile edit
  • 14:59, 30 August 2025 Lisa talk contribs posted a new comment on X1203 (Both [BAT] XH2.54 ports can be used simultaneously, and there's no limit on the number of batteries used. However, they must be connected in parallel, and batteries of the same specifications are strongly recommended.)
  • 14:49, 30 August 2025 Lisa talk contribs posted a new comment on X1008 (OK, you can contact us by email at any time, and tell us the AliExpress order number.)
  • 19:24, 29 August 2025 5.165.7.42 talk posted a new comment on LVDS2 (can it handle a 10bit lvds, if e4 and o4 pair used?)
  • 18:02, 29 August 2025 83.115.85.208 talk posted a new comment on X1203 (Hi, I can’t disable battery charging. The command «  pinctrl set 16 op dh » only makes the ups restart. After restart the battery charging led is still flashing. Thanks Also, is there a battery capacity limitation ? Can I plug 4 18650 in parallel to each xh254 pin ?)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"