Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 12:22, 26 April 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hi，Andi 5 seconds after the MCU detects the low level, it cuts off the power; this time is sufficient. if you want to change it, you can try this: add ‘/bin/sleep/ 2’ in place of 1 or 2 in the pictureNASPI-X-C1-shutdown.png. But we haven't tested it this way)
  • 12:15, 26 April 2022 Lisa talk contribs posted a new comment on NASPi (Hi， If you want to perform a timed shutdown, you can add xoff to crontab. But we haven't tested it this way, you can re-debug it. Thanks~)
  • 12:05, 26 April 2022 176.59.202.118 talk posted a new comment on WEMOS ESP8266 Board with OLED & 18650 Battery Holder (Change pins SSD1306Wire display(0x3c, SDA, SCL); to SSD1306Wire display(0x3c, SCL, SDA); That board have some mistakes. For example: if You move joystick Right it will Reset. 8-))
  • 07:31, 26 April 2022 72.215.159.34 talk posted a new comment on X735 (Found the problem and fixed it. The red/black wire was straight through when I received it. I was able to reverse the wire and it turned on. Video gave me the hint. All good.)
  • 06:56, 26 April 2022 72.215.159.34 talk posted a new comment on X735 (Hello, I'm using X735 v3.0 with X832. I followed through with the video and removed the jumper from X832. It will not power on. X832 powers up fine without X735.)
  • 05:02, 26 April 2022 185.128.194.66 talk posted a new comment on NASPi (So if we cant add xoff to crontab how can we perform a timed shutdown ?) Tags: Mobile web edit, Mobile edit
  • 23:06, 25 April 2022 212.51.151.132 talk posted a new comment on X-C1 Software (Hi after run x-c1-softsd.sh my NASPI start to shutdown and powers off after 4 seconds. That seems to be not long enogh for my raspberry os to properly shut down and reach the power off target. My NASPI powers off while systemd is still busy to stop all the processes. Is there a way to extend the time between start the shutdown and power off or even better: check if systemd power off target is reached before power off ? thx best regards Andi)
  • 15:33, 25 April 2022 Lisa talk contribs posted a new comment on X728-Software (Hello， SORRY, libreElec is the readonly image, so don't install our python script.)
  • 15:16, 25 April 2022 Lisa talk contribs posted a new comment on X-C1 Software (Hello，It's a 4010 PWM Fan-3Pin for NASPi. you can buy it from herehttps://geekworm.com/collections/raspberry-pi/products/dc-5v-30mm-40mm-50mm-60mm-cooling-fan?variant=39567352660056)
  • 02:23, 25 April 2022 87.4.53.214 talk posted a new comment on X-C1 Software (after 4 months the fan start to make noise and doesn't have the same performance anymore. Please can someone tell me what model it is, or something compatible? some link where I can buy it, i tried another fan but is working always at max power)
  • 00:11, 25 April 2022 87.159.114.47 talk posted a new comment on X728-Software (Hello, I want to use the X728 v2.1 device with the Libreelec/Kodi distribution. Is there a way or a guide to install the software? The device works flawlessly on Raspian OS. Thanks)
  • 18:11, 24 April 2022 Lisa talk contribs posted a new comment on X728 (Hi，Miguel ①Please do not use USB Type-C and DC Jack power to X728 at the same time. ②When the input voltage is lower than about 4.2~4.5, gradually switch to battery power supply)
  • 17:53, 24 April 2022 46.126.173.109 talk posted a new comment on M200 (Is the aliexpress geekworm official store a good place to buy one?) Tags: Mobile web edit, Mobile edit
  • 17:47, 24 April 2022 46.126.173.109 talk posted a new comment on M200 (Thank you for answer I will buy an M200 board when the raspberry pi zero 2 w is back in stocks) Tags: Mobile web edit, Mobile edit
  • 17:30, 24 April 2022 Lisa talk contribs posted a new comment on M200 (Hi, M200 is JUST a Gigabit Ethernet expansion board,and has nothing to do with the operating system.Whether the operating system is compatible depends on the Raspberry Pi motherboard.)
  • 17:22, 24 April 2022 46.126.173.109 talk posted a new comment on M200 (Is it also compatible with the volumio operating system) Tags: Mobile web edit, Mobile edit
  • 17:22, 24 April 2022 Lisa talk contribs posted a new comment on CM4 to CM3 Adapter (Hi，please refer the picture[Interface definition diagram]; CM4 has gpio0,gpio1; ID_SD of CM4 corresponds to GPIO0, ID_SC is GPIO1)
  • 15:17, 24 April 2022 189.202.90.169 talk posted a new comment on X728 (Good day, Can both input power supplies (USB Type-C and DC Jack) be used at the same time? What would happen if one (or both) of the input's voltage or current drops below the specification? I believe in the event where both the first, and second power supply inputs requirements fail, the AC FAIL LED will light up and the board will now use it's 18650 batteries. Is it safe for the board to receive an input below the requirements? e.g. solar panels outputting 0V at night, or below 5V and be...) Tags: Mobile web edit, Mobile edit
  • 22:35, 23 April 2022 105.247.129.114 talk posted a new comment on CM4 to CM3 Adapter (Hi, trying to connect the official 7-inch LCD. The LCD is set up using I2C on pin3 and pin5 on the CM3, but you have GPIO0 and GPIO1 connected to these pins. According to the CM4 datasheet, there are no GPIO0 nor GPIO1... 2 Questions: 1) Is the I2C connected? If yes, where? 2) To which pins on the CM4 are pin3 and pin5 on the SODIMM connector connected to?)
  • 12:12, 22 April 2022 Lisa talk contribs posted a new comment on X728 (Hi， Short the AON pin； after shutting down, the Raspberry Pi will not restart automatically if the power supply is not replugged in or unplugged. But AON function detection is more sensitive, if it detects a voltage, it will automatically turn on.and we will improve this feature in the future.Thanks~)
  • 10:58, 22 April 2022 Lisa talk contribs posted a new comment on X728 (Hi， The size of the button top batteries may be a bit large. you can use flat top batteries. please refer to：X728-hardware#18650 battery dimension;Please buy the correct size battery.)
  • 16:16, 21 April 2022 189.217.0.185 talk posted a new comment on X728 (Hi, both button top and flat top batteries woudl fit right?)
  • 10:25, 20 April 2022 114.167.187.215 talk posted a new comment on X728 (Is it a specification that the UPS does not power down after the RPI shuts down successfully using the X728? Due to this phenomenon, RPI does not start even if power is supplied to the UPS after shutdown. The AON pin is set to short.)
  • 16:48, 19 April 2022 Lisa talk contribs posted a new comment on CM4 to CM3 Adapter (Hi， Please refer CM4 to CM3 Adapter#FAQQ2)
  • 23:06, 18 April 2022 107.203.254.12 talk posted a new comment on CM4 to CM3 Adapter (It does work with the CM4.)
  • 11:54, 18 April 2022 107.203.254.12 talk posted a new comment on CM4 to CM3 Adapter (Would this work with the CM4 Lite? (No eMMC)) Tags: Mobile web edit, Mobile edit
  • 11:46, 18 April 2022 Lisa talk contribs posted a new comment on M200 (Hi， Yes，because of the size of the M200 board, even if the case retains the SD card slot, it cannot be used. So we didn't design SD card slot. If you have any better suggestion, please let us know. Thanks~)
  • 10:57, 18 April 2022 Lisa talk contribs posted a new comment on X857 (Hi， Could you provide a test video, or some pictures，please？please Email to support@geekworm.com； and let us know your order No，Thanks！)
  • 00:26, 18 April 2022 50.35.78.224 talk posted a new comment on X857 (Hi Lisa, Yes, using GPIO to power Pi4 and USB 3.0 for the SSD. Still no luck. All works when running completely from battery. But external PSU into the UPS HAT and charging is happening, then the SSD will randomly disconnect, and I lose data on the SSD. Cause me to have to reflash. Still unable to get this to work, tried all power connectivity options from the UPS board to the SSD, either via a direct link or via the USB 3.0. Problem is the same. Thanks)
  • 17:05, 17 April 2022 80.187.65.65 talk posted a new comment on M200 (im Gehäuse kein Schlitz für Mikro-SD Karte vorhanden :-()
  • 17:18, 15 April 2022 Lisa talk contribs posted a new comment on NASPi (Hello， xoff cannot be added in crontab.)
  • 14:10, 15 April 2022 Lisa talk contribs posted a new comment on X630 (Hi， Sorry，there are currently no 3D printed case for X630.)
  • 14:10, 15 April 2022 Lisa talk contribs deleted comment #2475 on X630
  • 14:10, 15 April 2022 Lisa talk contribs posted a new comment on X630 (Hi， Sorry，there are currently no 3D printed case for X630.)
  • 03:38, 15 April 2022 186.86.32.216 talk posted a new comment on X630 (A 3D printed case for this wonderful product?)
  • 13:14, 14 April 2022 202.128.100.38 talk posted a new comment on NASPi (I want to add xoff to crontab but it doesn't work crontab -e ________________ 12 0 0 0 /home/pi/xoff _________________ please let me know how to add xoff to crontab. thanks. (raspberrypi4))
  • 10:34, 12 April 2022 Lisa talk contribs posted a new comment on U100 (Hello， U100 does not support reading battery voltage and other states.)
  • 09:12, 12 April 2022 115.133.220.208 talk posted a new comment on U100 (Can i read battery status from the raspberry pi ?)
  • 11:56, 11 April 2022 Lisa talk contribs posted a new comment on X708-Hardware (Hi， Could you please tell us more details? especially the power supply you use. Please send a test video and tell us your order number by Emai(support@geekworm.com). thank you.)
  • 11:09, 11 April 2022 Lisa talk contribs posted a new comment on X708-Hardware (Hi， Please remove the battery to test. Can USB-C power supply power the X708？ If OK, please re-install the battery test.)
  • 00:20, 9 April 2022 39.109.159.9 talk posted a new comment on X708-Hardware (x708 v1.2. new hat. the power loss detection led is always flashing. battery is always draining and no charging. checked that raspberry usb c power supply is ok. need advice. when running x708pld.py, it shows: ---AC Power Loss OR Power Adapter Failure--- ---AC Power OK,Power Adapter OK--- ---AC Power Loss OR Power Adapter Failure--- ---AC Power OK,Power Adapter OK--- ---AC Power Loss OR Power Adapter Failure--- ---AC Power OK,Power Adapter OK--- ---AC Power Loss OR Power Adapter Failure---...) Tags: Mobile web edit, Mobile edit
  • 16:09, 6 April 2022 Lisa talk contribs posted a new comment on X706 (Hi， x706 does not support external battery holder, only two batteries can be installed.If you want to use more batteries, please refer to X728, X708)
  • 16:00, 6 April 2022 Lisa talk contribs posted a new comment on UPS3 (If the heat sink is very small, it is used on the chip of the UPS board. and it is also possible not to use it. please try to contact the customer service of aliexpress u-geek workshop store.)
  • 10:48, 6 April 2022 Lisa talk contribs posted a new comment on T208-hardware (Yes，you can use AON and PLD at the same time，no conflict between them.)
  • 09:04, 4 April 2022 116.87.101.112 talk posted a new comment on T208-hardware (Sorry, I meant, is it possible to use both the AON and PLD headers at the same time?)
  • 23:02, 2 April 2022 109.150.163.69 talk posted a new comment on X706 (Can the X706 be daisy chained to add more capacity?)
  • 19:39, 2 April 2022 82.76.158.107 talk posted a new comment on UPS3 (I've ordered UPS 3 from aliexpress u-geek workshop store. In the package I've received the UPS 3 and a small plastic bag with two PH 2.0 2-PIN cables and two very small radiators(these are not for raspberryPI as they are very small and it's almost the size of the microchips on the ups 3 hat) Besides that I have one more question. Sometimes the board makes some coil whining noise, is this normal?)
  • 17:20, 2 April 2022 Lisa talk contribs posted a new comment on UPS3 (Hi， If you received a small aluminum heatsink, it's probably for a Raspberry Pi motherboard. But our UPS 3 HAT does not include a heatsink.where did you buy the UPS 3，could you please tell us your order number？)
  • 17:18, 2 April 2022 Lisa talk contribs deleted comment #2460 on UPS3
  • 17:10, 2 April 2022 Lisa talk contribs posted a new comment on UPS3 (Hi， The heatsink is for the Raspberry Pi motherboard.)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"