H502

H502 Dimension

H502

H502 Support 30x30mm Fan Installation

H502

H502 with expansion board

Overview

H502 is an ultra-thin one-piece copper heatsink specially designed for Raspberry Pi 5 Model B. CNC-processed copper heatsink with precise cutouts, designed to seamlessly fit the Raspberry Pi 5B motherboard.

Through-hole screw holes allow expansion boards installed on top of the H502 heatsink or on the bottom of the H502 heatsink. H502 also supports 30x30mm cooling fan installation for better heat dissipation.

Geekworm Cooler Series:

Model	Compatible With	Material	Thickness(mm)	Support Fan
Pi 5 official Active Cooler	Raspberry Pi 5	Aluminum Alloy	10mm	√ with 4-pin 3010 blower fan
H505	Raspberry Pi 5	Aluminum Alloy	11.6mm	√ with 4-pin 3007 blower fan
H509	Raspberry Pi 5	Aluminum Alloy	15mm	× don't support fan installation
Argon THRML 30-AC	Raspberry Pi 5	Aluminum Alloy	9.6mm	√ with 4-pin 3007 blower fan
H501	Raspberry Pi 5	Aluminum Alloy	9.5mm	√ with 4-pin 3007 blower fan
H502	Raspberry Pi 5	Copper	4mm	× support 30x30 fan installation
P165-B	Raspberry Pi 4	Aluminum Alloy	11mm	× support 30x30 fan installation
P165-A	Raspberry Pi 4	Aluminum Alloy	7mm	× support 25x25 fan installation
H402	Raspberry Pi 4	Copper	4mm	× don't support fan installation
C235	Raspberry Pi Computer Module 4 (CM4)	Aluminum Alloy	12mm	× support 30x30 fan installation
C296	Raspberry Pi Zero 2 W	Aluminum Alloy	10mm	× don't support fan installation

Features

Model: H502
Material: copper
heartsink Thickness: 4mm / 0.16inch
Heatsink Net Weight: 63g / 0.14lb
Through-hole screw holes allow expansion boards installed on the top of heatsink or on the bottom of raspberry pi
Supports 30x30mm fan installation for active cooling
Comes with thermal pads for both CPU,RAM,USB chip and network module of Raspberry Pi 5
Includes an acrylic plate for installing under the Raspberry Pi 5 to provide protection