Template:Raspberry Pi 5 UPS Sets

From Geekworm Wiki
Jump to navigation Jump to search
Caution:
*The Matching Case section only indicates compatibility between the case, UPS and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.
*In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).
Model Compatible with Mounting Position Lithium battery type Battery Holders Power Input Connector Power Output Connector Matching Case Product Matching Reference Note
X1200 Raspberry Pi 5 Bottom 3.7V 18650 Battery 2-Cell
  • 5Vdc 5A via USB Type-C of X1200
 5Vdc Power Output XH2.54-2P x2 X1200-C1 -
X1201 Raspberry Pi 5 Bottom 3.7V 18650 Battery 2-Cell
  • 5Vdc 5A via USB Type-C of X1201
  • 5Vdc ≥3A via XH2.54-2P connector of X1201
 5Vdc Power Output XH2.54-2P x3 X1201-C1 Ultra-thin
X1202 Raspberry Pi 5 Bottom 3.7V 18650 Battery 4-Cell
  • 5Vdc 5A via USB Type-C of X1202
  • 6-18Vdc ≥3A via DC 5521 power jack of X1202
  • 6-18Vdc ≥3A via XH2.54-2P connector of X1202
 5Vdc Power Output XH2.54-2P x2 X1202-C1 -
X1203 Raspberry Pi 5 Bottom 3.7V Lithium Battery No battery holder
  • 5Vdc 5A via USB Type-C of X1203
  • 6-18Vdc ≥3A via DC 5521 power jack of X1203
  • 5Vdc ≥3A via XH2.54-2P connector of X1203
 5Vdc Power Output XH2.54-2P x2 - -
*X1205 Raspberry Pi 5 Bottom 3.7V 21700 Battery 2-Cell
  • 5Vdc 5A via USB Type-C of X1205
  • 9-18Vdc ≥3A via DC 5521 power jack of X1205
  • 9-18Vdc ≥3A via XH2.54-2P connector of X1205
 5Vdc Power Output XH2.54-2P x2 X1205-C1 -
*X1206 Raspberry Pi 5 Bottom 3.7V 21700 Battery 4-Cell
  • 5Vdc 5A via USB Type-C of X1206
  • 5-6Vdc ≥3A via DC 5521 power jack of X1206
  • 5-6Vdc ≥3A via XH2.54-2P connector of X1206
 5Vdc Power Output XH2.54-2P x2 X1206-C1 -
*X1207 Raspberry Pi 5 Top 3.7V 21700 Battery 1-Cell
  • 5Vdc 5A via USB Type-C of X1207
  • 35-57VDC powering over Ethernet
 - X1207-C1 Support PoE-Powered
*X1208 Raspberry Pi 5 Top 3.7V 21700 Battery 1-Cell
  • 5Vdc 5A via USB Type-C of X1208
 - X1207-C1 - Support M.2 NVMe SSD 2230/2242/2280
*X1209 RPi 5B/4B/3B/3B+ Top 3.7V Lithium Battery No battery holder
  • 5Vdc ≥3A via USB Type-C of X1209
  • 6-18Vdc ≥3A via DC 5521 power jack of X1209
 5Vdc Power Output XH2.54-2P x2 - -
*X728 All RPi that use a 40-pin header Top 3.7V 18650 Lithium Battery 2-Cell
  • 5Vdc 5A via USB Type-C of X728
  • 5Vdc ≥4A via DC 5521 power jack of X728
 5Vdc Power Output
  • The 40-pin header
  • XH2.54-2P x2
 - -
*X-UPS1 All RPi & Most Single Board Computers (SBC) that uses 12Vdc or 5Vdc Standalone 3.7V 18650 Lithium Battery 4-Cell
  • 6-18Vdc ≥3A via DC 5521 power jack of X-UPS1
  • 5Vdc Power Output XH2.54-2P x2
  • 12Vdc Power Output XH3.96-2P x2
 -
  • GPIO Pin-connected standalone design, boasting universal compatibility
  • Power Adapter: PSU60
 -
Retrieved from "https://wiki.geekworm.com/index.php?title=Template:Raspberry_Pi_5_UPS_Sets&oldid=24846"