Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 12:13, 14 October 2024 Lisa talk contribs created page File:Test pad on the Pi's PCB.png
• 12:13, 14 October 2024 Lisa talk contribs uploaded File:Test pad on the Pi's PCB.png
• 10:55, 14 October 2024 Harry talk contribs performed unknown action "comments/add" on X1011 (Please contact us via mail)
• 10:54, 14 October 2024 Harry talk contribs performed unknown action "comments/add" on X1011 (X1011 does not support hardware RAID, please start with software)
• 10:42, 14 October 2024 Lisa talk contribs performed unknown action "comments/add" on X306 (The 4-pin header cannot be used as a power supply. please refer to the [4 Pin header function description])
• 01:54, 14 October 2024 185.78.11.142 talk performed unknown action "comments/add" on X1011 (Update, I have change from the RPi 25w USB PSU to a 50w PSU direct to the x1011. I am using Open Media Vault and when a drive disappears it comes back after a reboot and after a second reboot the RAID 5 array is "clean" again...)
• 04:38, 13 October 2024 45.88.221.129 talk performed unknown action "comments/add" on X-UPS1 (Can you please explain how to wire a LED to the PLD LBAT port?) Tags: Mobile edit Mobile web edit
• 20:19, 12 October 2024 37.201.213.105 talk performed unknown action "comments/add" on X306 (I have soldered the 4-pin header in. I want to use the 4-pin header as a power supply instead of the pogo pins. The 4-pin header does only deliver 3.3V. The pogo pins deliver 5V. Is there a way for the 4-pin header do deliver 5V?)
• 11:26, 12 October 2024 Lisa talk contribs performed unknown action "comments/add" on X306 (X306 V1.3 has removed the 4Pin header, do you want to solder it to connect a power switch?)
• 17:22, 11 October 2024 37.201.213.105 talk performed unknown action "comments/add" on X306 (I still would like to know the answer to my question, please.)
• 09:59, 11 October 2024 Cindy talk contribs uploaded a new version of File:Supported-SSD-1.jpg
• 21:08, 10 October 2024 94.134.28.144 talk performed unknown action "comments/add" on NVMe SSD boot with the Raspberry Pi 5 (WD Blue SN580 NVMe SSD out of the Box running (Anonymous user #13 think you are right meant is Blue not Green:) WD Blue SN580 running on M1001 V2(one LED),Bookworm Lite (apt update&&apt upgrade),newest Bootloader. pi5:~ $ sudo lspci 0000:00:00.0 PCI bridge... 0000:01:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN580 NVMe SSD (DRAM-less) (rev 01) 0001:00:00.0 PCI bridge... 0001:01:00.0 Ethernet... --- pi5:/mnt/nvmep1 $ vcgencmd bootloader_version 2024/09/23 14:02:56 ... --- pi5:/...)
• 10:31, 10 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1201 (Hi,X1201 UPS not support Pi4;you may consider using X-UPS1)
• 02:41, 10 October 2024 185.72.234.55 talk performed unknown action "comments/add" on X1001 (Hi, what is the difference between the M901 and X1001, other than the mounting style?)
• 01:32, 10 October 2024 201.110.169.216 talk performed unknown action "comments/add" on X1201 (Would it work with a Raspberry Pi 4? I know there are specific UPS boards for RPi4, but I'm looking into building a cluster case for a mix of RPi5s and RPi4sm and would like to standarize the build/footprint)
• 00:57, 9 October 2024 78.42.87.196 talk performed unknown action "comments/add" on X1012 (Patriot [P320] 128GB - P320P128GM28 is working fine - hdparm 398.24 mb/s Kioxa ssd from steam deck isnt working because of M/B-Key, you need a M-Key NVME PCIe SSD)
• 23:27, 8 October 2024 185.78.11.142 talk performed unknown action "comments/add" on X1011 (I have one of these with 4 SSD and it works fine when all drives are separate but as soon as I run them in RAID5 one drive fails. It always seems to be the drive in slot 2 that fails even when I swap them round.)
• 17:30, 5 October 2024 Lisa talk contribs performed unknown action "comments/add" on X-UPS1 (Hi，The height of the expansion board with battery is about 21mm; the distance between the first and second layers is 25mm.)
• 17:17, 5 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello，Sorry, we haven't tested the Crucial P3 Plus; if you already have this SSD, you can test it. If you need to buy an SSD, please refer to here (the models we tested)：https://geekworm.com/products/colorful-cn600-pcie3-m2-nvme or refer to our customer's test video to select a compatible SSD.X1001#User Manual--Which NVMe drives work with a Raspberry Pi 5?)
• 17:17, 5 October 2024 Lisa talk contribs performed unknown action "comments/delete" on X1001
• 17:17, 5 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1001 (Hello，Sorry, we haven't tested the Crucial P3 Plus; if you already have this SSD, you can test it. If you need to buy an SSD, please refer to here (the models we tested)：https://geekworm.com/products/colorful-cn600-pcie3-m2-nvme or refer to our customer's test video to select a compatible SSD.X1001#User Manual--Which NVMe drives work with a Raspberry Pi 5?)
• 21:17, 4 October 2024 131.100.39.240 talk performed unknown action "comments/add" on X-UPS1 (What is the height of the board with batteries ?) Tags: Mobile edit Mobile web edit
• 20:25, 4 October 2024 163.116.212.48 talk performed unknown action "comments/add" on X1001 (Hello, so i have a Raspberry Pi 5 with a Geekworm X1001 PCIe to M.2 Key-M NVMe SSD PIP TOP, is Crucial P3 Plus 1TB PCIe Gen4 NVMe M.2 SSD compatible with x1001? Thanks.)
• 18:16, 4 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1012 (Sorry, only incompatible lists are available right now.If you want to buy an M.2 NVMe 2280 SSD, please refer to this link https://geekworm.com/products/colorful-cn600-pcie3-m2-nvme; this is the one we tested.)
• 11:34, 4 October 2024 218.253.67.126 talk performed unknown action "comments/add" on X1012 (Is there a list of compatible SSD models somewhere? (instead of having people watching videos, a official list would be much better))
• 18:23, 3 October 2024 14.153.79.53 talk performed unknown action "comments/add" on X1202 (One more thing you need to consider is to think about the conversion rate of UPS HAT, which is usually around 85%.)
• 17:21, 3 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1012 (Hello，Sorry, we haven't tested Kioxia; you can refer to our customer's test video to select a compatible SSD.X1001#User Manual--Which NVMe drives work with a Raspberry Pi 5?)
• 17:07, 3 October 2024 Lisa talk contribs performed unknown action "comments/add" on NESPi Pro (Button battery, if you have already purchased this case, you can look at the specifications of the button battery interface on the case.)
• 17:04, 3 October 2024 Lisa talk contribs performed unknown action "comments/add" on X1203 (This depends on the battery capacity you use and the load requirements.)
• 16:37, 3 October 2024 213.249.56.36 talk performed unknown action "comments/add" on NESPi Pro (What type of battery is needed?)
• 03:43, 3 October 2024 198.44.128.154 talk performed unknown action "comments/add" on X1203 (Are two 3.7V batteries required to power the full 5A output?)
• 18:41, 2 October 2024 143.93.117.10 talk performed unknown action "comments/add" on X1001 (We have tested two SSDs with the X1002. One works (Intenso M.2 SSD Premium) one does not (Kensington NV2 PCIe 4.0). Both are 256GB models.)
• 16:43, 2 October 2024 218.253.67.126 talk performed unknown action "comments/add" on X1012 (Hi, can I use Kioxia SD10 SSD with this?)
• 05:47, 2 October 2024 73.171.253.198 talk performed unknown action "comments/add" on 2.8 inch Touch Screen for Pi zero (For those looking for info on the mzp280v00br with the pi zero w: Use the legacy pi os install through the Raspberry P Imager. Enable the legacy Gl driver in raspi-config. I used the 32 bit os as I was on the pi zero. This is the only os that worked. Have fun!)
• 03:01, 1 October 2024 86.87.123.160 talk performed unknown action "comments/add" on X1202 (Hello, I have 4 batteries, each with a capacity of 2980mAh. The total capacity is therefore 4x2980mAh=11920mAh. With the Raspberry running my application I measured it draws 700mA. So 11920mAh / 700mA = approx 17 hours of running time. Can someone confirm this? Thanks in advance.)
• 22:44, 30 September 2024 185.50.233.235 talk performed unknown action "comments/add" on X1202 (Actually I see it in the interface picture, point 6: 5VO power output LED: if the Pi 5 is not detected, will turn on for 3 second then off. Does it mean then that the output USB gives continuous power for 3 seconds after the RPI shuts down? Is the powering of the USB output seamless till switch off?)
• 22:32, 30 September 2024 185.50.233.235 talk performed unknown action "comments/add" on X1202 (Hi! Could I use the USB output to power up a USB hub? In the interface picture it says: 5V, current unlimited, but down in the user manual it says: USB2.0 type-A power output socket, which implies 5V 500mA, which would be not enough I guess. The use case is that the RPI cuts the power on its usb 3.0 ports at shutdown too soon, causing an increase of the Unexpected Power Loss SMART counter. Using an active USB hub between the RPI and the USB SSD enclosure solves the problem, but at power los...)
• 21:42, 29 September 2024 143.244.44.174 talk performed unknown action "comments/add" on X652 (What are all the benefits/use cases of the NVMe? I can store more images and boot from NVMe, but can I screen capture to the NVMe from PiKVM? Anything else?) Tags: Mobile edit Mobile web edit
• 18:01, 29 September 2024 Lisa talk contribs performed unknown action "comments/add" on X1100 (Hi， X1100 supports UASP.)
• 12:27, 29 September 2024 Lisa talk contribs created page File:N310-IMG-8561-Installation.jpg
• 12:27, 29 September 2024 Lisa talk contribs uploaded File:N310-IMG-8561-Installation.jpg
• 12:24, 29 September 2024 Lisa talk contribs uploaded a new version of File:N310-IMG-8561-installation.jpg
• 11:52, 29 September 2024 Lisa talk contribs performed unknown action "comments/add" on X1203 (Hello，Sorry, we haven't tested it with the car and can't offer advice. it is recommended to use a case to protect the board and battery if you use it in a car.)
• 11:52, 29 September 2024 Lisa talk contribs performed unknown action "comments/delete" on X1203
• 11:41, 29 September 2024 Lisa talk contribs performed unknown action "comments/add" on X1300 Software (Hello，it is normal；the /dev/media number can change.)
• 11:35, 29 September 2024 Lisa talk contribs performed unknown action "comments/add" on X1203 (Hello，Sorry, we haven't tested it with the car and can't offer advice.)
• 11:23, 29 September 2024 Lisa talk contribs performed unknown action "comments/add" on X1100 (Hi，please refe to X1007)
• 03:29, 29 September 2024 189.183.138.207 talk performed unknown action "comments/add" on X1100 (Is it possible to connect 2 x SATA SSD 2.5"?)
• 02:14, 29 September 2024 136.144.19.219 talk performed unknown action "comments/add" on NVMe SSD boot with the Raspberry Pi 5 (I can confirm that it is possible to boot Home Assistant from NMVw using Geekworm X1001 PCIe to M.2 HAT and Kingston NV2 1TB M.2 2280 NVMe. After putting it all together the device did not even boot Pi Lite. (did not have monitor to get debug) Then after removing the SSD it did boot. And after updating boot loader and setting dtparam=pciex1_gen=3 I was able to boot with the SSD attached. From there I flashed the SSD with Home Assistant through terminal directly on device and then booted from...)
• 00:24, 28 September 2024 107.192.62.177 talk performed unknown action "comments/add" on X1203 (With the 6-20V input on the DC jack, is it safe to operate this directly from vehicle/car power or do you recommend using an external regulator in between? Thanks!)