-
H501
Overview
This is H501 active cooler is specially for Raspberry Pi 5.
Geekworm Cooler Series:
| Picture | Model | Compatible With | Material | Thickness(mm) | Support Fan | |
|---|---|---|---|---|---|---|
 |
C519 | Raspberry Pi Computer Module 5 (CM5) | Aluminum Alloy | 15mm | √ support fan installation | |
 |
Pi 5 official Active Cooler | Raspberry Pi 5 | Aluminum Alloy | 10mm | √ with 4-pin 3007 blower fan | |
 |
H505 | Raspberry Pi 5 | Aluminum Alloy | Net Weight: 39g | √ with 4-pin 3007 blower fan | |
 |
H509 | Raspberry Pi 5 | Aluminum Alloy | 15mm | × don't support fan installation | |
 |
H510 | Raspberry Pi 5 | Brass | 10mm / Net Weight: 55g | √ with 4-pin 3007 blower fan | |
 |
Argon THRML 30-AC | Raspberry Pi 5 | Aluminum Alloy | 9.6mm | √ with 4-pin 3007 blower fan | |
|
H501 | Raspberry Pi 5 | Aluminum Alloy | 9.5mm | √ with 4-pin 3007 blower fan | |
 |
H502 | Raspberry Pi 5 | Brass | 4mm | × support 30x30 fan installation | |
 |
P165-B | Raspberry Pi 4 | Aluminum Alloy | 11mm | × support 30x30 fan installation | |
 |
P165-A | Raspberry Pi 4 | Aluminum Alloy |
7mm/8mm (Version updated; 2 versions available, 8mm (new), compatibility unaffected) |
× support 25x25 fan installation | |
 |
H402 | Raspberry Pi 4 | Brass | 4mm | × don't support fan installation | |
 |
C235 | Raspberry Pi Computer Module 4 (CM4) | Aluminum Alloy | 12mm | × support 30x30 fan installation | |
 |
C296 | Raspberry Pi Zero 2 W | Aluminum Alloy | 10mm | × don't support fan installation |
Features
- Model: H501
- Raspberry Pi 5 Active Cooler: Aluminium heatsink with blower PWM fan for Raspberry Pi 5 8 GB / 4 GB
- Blower PWM fan: different from ordinary coolers, H501 uses a blower fan to expel heat more efficiently. It also supports PWM speed regulation
- Lightweight and easy to install: easy to install, just snap the 2 nail pegs into the Raspberry Pi 5 on-board hole
Packing List
- 1 x H501 active cooler with blower PWM fan
Installation
