Template:PCIe to NVME Sets: Difference between revisions

Line 9:

* If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.

~~~~Caution:~~~~

*~~~~The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.~~~~

* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}

*In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).

* In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).

{| class="wikitable"

! Model !! Compatible with !! Position!! NVMe M2 SSD Length Support !! Power Input !! Power Supply for SSD !! Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference

Line 18:

Line 19:

*27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)

*9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])

:~~~~Warning: Only one power source should be connected at a time~~~~

:{{Red|Warning: Only one power source should be connected at a time}}

|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - || ~~~~Yes~~~~ ||

|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||

*'''Power Adapter:''' [[PSU60]]

|-

Line 35:

Line 36:

:*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

:*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1002]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| 2230/2242/2260/2280||

| [[X1002]] || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

Line 49:

Line 50:

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] ~~~~Only~~~~||Yes||-||Not tested||

|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1004]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd~~~~: 2280||

| [[X1004]] || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1005]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~Dual ssd~~~~: 2230/2242/2260/2280||

| [[X1005]] || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1011]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~4 ssds~~~~: 2230/2242/2260/2280||

| [[X1011]] || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||

*5 ~~VDC ±5%~~, ≥5A ~~via FFC & pogo pins~~

* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}

*~~5 VDC ±5%, ≥5A via DC5521 power~~ jack ~~of X1011~~

* X1011 DC jack: 5V, ≥5A {{Red|(for 3–4 SSDs → use 5V 10A).}}

*5 VDC ±5%, ≥5A ~~via Type-C of Pi 5~~

|| 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||

*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]

Line 85:

| [[X1015]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

Line 92:

*5 VDC ±5% via FFC

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||-

|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-

|-

| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|-

| [[Q200]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

|-

| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

@@ Line 9: / Line 9: @@
 * If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
-<span class="tb_red">Caution:</span>
+{{Red|Caution:}}
-*<span class="tb_red">The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.</span>
+* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}
-*<span class="tb_red">In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).</span>
+* <span class="tb_red">In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).</span>
 {| class="wikitable"
 ! Model !! Compatible with !!  Position!!  NVMe M2 SSD Length Support !! Power Input !! Power Supply for SSD !! Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference
@@ Line 18: / Line 19: @@
 *27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)
 *9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])
-:<span class="tb_red">Warning: Only one power source should be connected at a time</span>
+:{{Red|Warning: Only one power source should be connected at a time}}
-|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - || <span class="tb_red">Yes</span> ||
+|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||
 *'''Power Adapter:''' [[PSU60]]
 |-
@@ Line 35: / Line 36: @@
 :*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
 :*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])
-|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280||
+| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
@@ Line 49: / Line 50: @@
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] <span class="tb_red">Only</span>||Yes||-||Not tested||
+|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280||
+| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">Dual ssd</span>: 2230/2242/2260/2280||
+| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280||
+| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||
-*5 VDC ±5%, ≥5A via FFC & pogo pins
+* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}
-*5 VDC ±5%, ≥5A via DC5521 power jack of X1011
+* X1011 DC jack: 5V, ≥5A {{Red|(for 3–4 SSDs → use 5V 10A).}}
-*5 VDC ±5%, ≥5A via Type-C of Pi 5
 || 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
 *'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]
@@ Line 85: / Line 85: @@
 | <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
@@ Line 92: / Line 92: @@
 *5 VDC ±5% via FFC
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||-
+|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-
 |-
 | [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |-
-| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
+| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
 |-
 | [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-