Template:PCIe to NVME Sets: Difference between revisions

(8 intermediate revisions by 3 users not shown)

Line 1:

~~{{Red|Geekworm PCIe to NVME Sets:}}~~

After the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit] launched, we put four PiPs ([[X1001]], [[X1004]], [[X1011]], [[M901]]) through testing; only X1011 does not support the Hailo-8 AI accelerator.

Line 6:

Line 4:

'''Our tentative conclusions are as follows:'''

* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[~~X1015~~]]/[[~~X1002~~]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.

* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1001]]/[[X1015]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.

* If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.

~~Caution:~~

▼ Expand 📋 {{Red|'''Geekworm PCIe to NVME Family:'''}}

<~~span~~ class="~~tb_red~~">*The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.~~~~

</div>

~~*In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).~~

* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}

* {{Red|1=In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage x Current).}}

{| class="wikitable"

Line 21:

*27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)

*9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])

:~~~~Warning: Only one power source should be connected at a time~~~~

:{{Red|Warning: Only one power source should be connected at a time}}

|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - || ~~~~Yes~~~~ ||

|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||

*'''Power Adapter:''' [[PSU60]]

|-

Line 38:

:*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

:*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1002]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| 2230/2242/2260/2280||

| [[X1002]] || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

Line 52:

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] ~~~~Only~~~~||Yes||-||Not tested||

|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1004]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd~~~~: 2280||

| [[X1004]] || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1005]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~Dual ssd~~~~: 2230/2242/2260/2280||

| [[X1005]] || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1011]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~4 ssds~~~~: 2230/2242/2260/2280||

| [[X1011]] || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||

*5 ~~VDC ±5%~~, ≥5A ~~via FFC & pogo pins~~

* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}

*~~5 VDC ±5%, ≥5A via DC5521 power~~ jack ~~of X1011~~

* X1011 DC jack: [[PSU50]] 5V, 10A {{Red|(for 1–4 SSDs).}}

*5 VDC ±5%, ~~≥5A via Type-C of Pi 5~~

|| 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||

*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]

Line 88:

Line 87:

| [[X1015]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

Line 95:

Line 94:

*5 VDC ±5% via FFC

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||-

|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-

|-

| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|-

| [[Q200]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

|-

| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

Line 105:

Line 104:

| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|}

</div>

@@ Line 1: / Line 1: @@
-{{Red|Geekworm PCIe to NVME Sets:}}
 After the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit] launched, we put four PiPs ([[X1001]], [[X1004]], [[X1011]], [[M901]]) through testing; only X1011 does not support the Hailo-8 AI accelerator.
@@ Line 6: / Line 4: @@
 '''Our tentative conclusions are as follows:'''
-* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1015]]/[[X1002]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
+* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1001]]/[[X1015]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
 * If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
-<span class="tb_red">Caution:</span>
+<div style="font-weight:bold; padding:5px 0; border-bottom:1px solid #ddd;">
+  <span class="mw-customtoggle-myTable" style="cursor:pointer; color:#0645ad;">▼ Expand</span> 📋 {{Red|'''Geekworm PCIe to NVME Family:'''}}
-<span class="tb_red">*The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.</span>
+</div>
+<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-myTable">
-<span class="tb_red">*In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage × Current).</span>
+{{Red|Caution:}}
+* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}
+* {{Red|1=In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage x Current).}}
 {| class="wikitable"
@@ Line 21: / Line 21: @@
 *27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)
 *9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])
-:<span class="tb_red">Warning: Only one power source should be connected at a time</span>
+:{{Red|Warning: Only one power source should be connected at a time}}
-|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - || <span class="tb_red">Yes</span> ||
+|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||
 *'''Power Adapter:''' [[PSU60]]
 |-
@@ Line 38: / Line 38: @@
 :*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
 :*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])
-|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280||
+| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
@@ Line 52: / Line 52: @@
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] <span class="tb_red">Only</span>||Yes||-||Not tested||
+|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280||
+| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">Dual ssd</span>: 2230/2242/2260/2280||
+| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||
 *5 VDC ±5% via FFC & GPIO pin header
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280||
+| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||
-*5 VDC ±5%, ≥5A via FFC & pogo pins
+* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}
-*5 VDC ±5%, ≥5A via DC5521 power jack of X1011
+* X1011 DC jack: [[PSU50]] 5V, 10A {{Red|(for 1–4 SSDs).}}
-*5 VDC ±5%, ≥5A via Type-C of Pi 5
 || 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
 *'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]
@@ Line 88: / Line 87: @@
 | <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
 *'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
@@ Line 95: / Line 94: @@
 *5 VDC ±5% via FFC
 :'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
-|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||-
+|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-
 |-
 | [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |-
-| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
+| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
 |-
 | [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
@@ Line 105: / Line 104: @@
 | [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |}
+ </div>
+</div>