Difference between revisions of "Template:PCIe to NVME Sets"

From Geekworm Wiki
Jump to navigation Jump to search
Line 55: Line 55:
 
:'''NOTE:'''
 
:'''NOTE:'''
 
:*Input current varies by SSD
 
:*Input current varies by SSD
−
:*5V / 1A (max 5W) is sufficient to power 1 SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg see explanation])
 
 
|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
 
|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
Line 64: Line 63:
 
:'''NOTE:'''
 
:'''NOTE:'''
 
:*Input current varies by SSD
 
:*Input current varies by SSD
−
:*5V / 1A (max 5W) is sufficient to power 1 SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg see explanation])
 
 
|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
 
|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
 
*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 
*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
|-
 
|-
−
| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
+
| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280||
 +
*5 VDC ±5%, ≥5A via FFC & pogo pins
 +
*5 VDC ±5%, ≥5A via DC5521 power jack of X1011
 +
*5 VDC ±5%, ≥5A via Type-C of Pi 5
 +
|| 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
 
*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]
 
*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]
 
*'''Power Adapter:''' [[XS-GaN-27W]] / [[XSL-GaN-27W]]
 
*'''Power Adapter:''' [[XS-GaN-27W]] / [[XSL-GaN-27W]]
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
|-
 
|-
−
| <mark>[[X1012]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||[[P579]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
+
| <mark>[[X1012]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
 +
*35–57 VDC via Power over Ethernet (PoE)
 +
*40–57 VDC via auxiliary power jack
 +
|| 5V, 5A || [[P579]]|| [[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
|-
 
|-
−
| <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+
| <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
 +
*5 VDC ±5% via FFC & GPIO pin header
 +
:'''NOTE:'''
 +
:*Input current varies by SSD
 +
|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 
*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 
|-
 
|-
−
| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||-
+
| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
 +
*5 VDC ±5% via FFC
 +
:'''NOTE:'''
 +
:*Input current varies by SSD
 +
:*5V / 1A (max 5W) is sufficient to power 1 SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg see explanation])
 +
|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||-
 
|-
 
|-
−
| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+
| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 
|-
 
|-
−
| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
+
| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
 
|-
 
|-
−
| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+
| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 
|-
 
|-
−
| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+
| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 
|}
 
|}

Revision as of 16:35, 3 March 2026

Geekworm PCIe to NVME Sets:

After the Raspberry Pi AI Kit launched, we put four PiPs (X1001, X1004, X1011, M901) through testing; only X1011 does not support the Hailo-8 AI accelerator.

It should be noted that X1004 uses ASMedia ASM1182e PCIe switch, and X1011 uses ASM1184e, they can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.

Our tentative conclusions are as follows:

  • If you need to use hailo-8 ai accelerator with high performance, it is recommended to use X1015/X1002/X1003/M901/ the official M.2 HAT+ etc. When choosing these PIP boards, you should focus on whether there is a conflict between the camera cable and the PIP board installation, and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
  • If you don't care about the high performance brought by PCIe 3.0, then you can consider using X1004, so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.

*Caution: The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.

Model Compatible with Position NVMe M2 SSD Length Support Power Input Power Supply for SSD Matching Case Matching Cooler Support NVMe Boot Support PCIe 3.0 Support Hailo-8 AI Accelerator Product Matching Reference
X1000 Raspberry Pi 5 Top 2230/2242
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
  • 5V / 1A (max 5W) is sufficient to power 1 SSD (see explanation)
 3.3V, max 3.5A P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Not tested
X1001 Raspberry Pi 5 Top 2230/2242/2260/2280
  • 5 VDC ±5% via FFC
  • 5 VDC ±5% via XH2.54 interface
NOTE:
  • Input current varies by SSD
  • 5V / 1A (max 5W) is sufficient to power 1 SSD (see explanation)
  • XH2.54 interface – for use only when SSD power is insufficient (see explanation)
 3.3V, max 3.5A P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Yes
X1002 Raspberry Pi 5 Bottom 2230/2242/2260/2280
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
  • 5V / 1A (max 5W) is sufficient to power 1 SSD (see explanation)
 3.3V, max 3.5A P580 /
P580-V2		 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - NO
X1003 Raspberry Pi 5 Top 2230/2242
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
  • 5V / 1A (max 5W) is sufficient to power 1 SSD (see explanation)
 3.3V, max 3.5A P579 / P425 Official Cooler / H501 / H510 Only Yes - Not tested
X1004 Raspberry Pi 5 Top Dual ssd: 2280
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
 3.3V, max 3.5A + 3.5A P579-V2 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes (Requires EEPROM 2024/05/17 and later version) NO Yes
X1005 Raspberry Pi 5 Bottom Dual ssd: 2230/2242/2260/2280
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
 3.3 V, max 6A P580-V2 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes (Requires EEPROM 2024/05/17 and later version) NO Yes
X1011 Raspberry Pi 5 Bottom 4 ssds: 2230/2242/2260/2280
  • 5 VDC ±5%, ≥5A via FFC & pogo pins
  • 5 VDC ±5%, ≥5A via DC5521 power jack of X1011
  • 5 VDC ±5%, ≥5A via Type-C of Pi 5
 3.3 V, max 10A X1011-C1 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes (eeprom 2024/05/17 and later version) NO NO
X1012 Raspberry Pi 5 Top 2230/2242/2260/2280
  • 35–57 VDC via Power over Ethernet (PoE)
  • 40–57 VDC via auxiliary power jack
 5V, 5A P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Not tested
X1015 Raspberry Pi 5 Top 2230/2242/2260/2280
  • 5 VDC ±5% via FFC & GPIO pin header
NOTE:
  • Input current varies by SSD
 3.3 V, max 6A P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Yes
M901 Raspberry Pi 5 Top 2230/2242/2260/2280
  • 5 VDC ±5% via FFC
NOTE:
  • Input current varies by SSD
  • 5V / 1A (max 5W) is sufficient to power 1 SSD (see explanation)
 - P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Yes -
Q100 Raspberry Pi 5 Top 2242 - - P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Not tested -
Q200 Raspberry Pi 5 Top Dual ssd: 2280 - - P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 NO - Not tested -
M300 Raspberry Pi 5 Top 2230/2242 - - P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Not tested -
M400 Raspberry Pi 5 Top 2230/2242/2280 - - P579 Official Cooler / Argon THRML Cooler / H501 / H505 / H509 / H510 Yes - Not tested -
Retrieved from "https://wiki.geekworm.com/index.php?title=Template:PCIe_to_NVME_Sets&oldid=24841"