Overview
The X715 is the updated version from X710.
Some new features of X715(Updated on May 25th 2021)
- With more wide range voltage input from 6V to 60V;
- With 4-Pin PWR port to use external latching power switch, only supports latching switch, DON'T support Momentary switch
- Supports 3 kind power in connectors: DC 55*21 Jack, terminals and XH2.54;
- Supports 2 kind 5V power out connectors: XH2.54 and terminals;
- Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code.
- Remove safe shutdown function of X710;
The X715 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 60V operating input range with excellent load and line regulation,intelligent and safe power management,and a low noise PWM cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Features
FOR USE WITH |
Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B/Raspberry Pi 2 Model B/Raspberry Pi 1 Model B+
|
OPERATING SYSTEM |
- Raspbian Stretch
|
KEY FEATURES |
- - Ideal power management solution for Raspberry Pi
- - Integrated high-efficiency step-down DC-DC converter
- - Wide 6V to 60V operating input range
- - 5A continuous output current
- - High efficiency up to 90%
- - On-board DC jack and XH2.54 connector for power input
- - Power output via XH2.54 connector and the 40-pin header
- - Intelligent and safe power management
- - Equipped with momentary button switch for easy power control
- - Press the button to turn on
- - Press the button and hold for 1~2seconds to reboot
- - Press the button and hold for >8seconds to force shutdown
- - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A
- - On-board LED shows the status of power on, reboot and shutdown
- - With 4-Pin PWR port to use external latching power switch, only supports latching switch, DON'T support Momentary switch
- - Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- - Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code
- Reserved camera slot and display cutout - Both can still be used with X710 attached
- - Reserved 40-pin stackable Header for Add-On Boards
- - Works with all current models of the Raspberry Pi using a 40 pin header
- - Fully compatible with X820,X850, X860, X870, X822, X852, X825, X828, X855, X856, X857, but there is no match metal case for them
|
SPECIFICATION |
- - Power supply: 6~60Vdc ≥ 2A
- - Output: 5V 5%, Max 5A
- - DC power jack : 5.5*2.1mm, Positive Tip
- - Board size: 65 x 68mm
|
NOTES |
- - Don't connect any 5V-powered device to XH2.54 power input connector.
- - Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket
- - Please note that there is no mach case for X715. X715 is not fit for X820 case, X857 case and X825 case.
|
Document
X715 Software
Packing List
- 1 x X715 V1.0 Power Management Expansion Board
- 8 x M2.5 *5mm Screws
- 4 x M2.5 *12+6mm Spacers
- 4 x M2.5 *12mm Spacers
FAQ
Enable comment auto-refresher
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Walker
Anonymous user #4
Permalink |
Anonymous user #3
Permalink |
Walker
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa
Lisa